From patchwork Wed Oct 16 15:12:24 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Kai-Heng Feng X-Patchwork-Id: 11193621 X-Patchwork-Delegate: jikos@jikos.cz Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 0639076 for ; Wed, 16 Oct 2019 15:12:36 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id DCA3C20659 for ; Wed, 16 Oct 2019 15:12:35 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1727388AbfJPPMf (ORCPT ); Wed, 16 Oct 2019 11:12:35 -0400 Received: from youngberry.canonical.com ([91.189.89.112]:46817 "EHLO youngberry.canonical.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S2388825AbfJPPMe (ORCPT ); Wed, 16 Oct 2019 11:12:34 -0400 Received: from 61-220-137-37.hinet-ip.hinet.net ([61.220.137.37] helo=localhost) by youngberry.canonical.com with esmtpsa (TLS1.2:ECDHE_RSA_AES_128_GCM_SHA256:128) (Exim 4.86_2) (envelope-from ) id 1iKkyT-0003Tp-6w; Wed, 16 Oct 2019 15:12:29 +0000 From: Kai-Heng Feng To: jikos@kernel.org, benjamin.tissoires@redhat.com Cc: hdegoede@redhat.com, vicamo.yang@canonical.com, mika.westerberg@linux.intel.com, linux-input@vger.kernel.org, linux-kernel@vger.kernel.org, Kai-Heng Feng Subject: [PATCH v2] HID: i2c-hid: Remove runtime power management Date: Wed, 16 Oct 2019 23:12:24 +0800 Message-Id: <20191016151224.1316-1-kai.heng.feng@canonical.com> X-Mailer: git-send-email 2.17.1 Sender: linux-input-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-input@vger.kernel.org Runtime power management in i2c-hid brings lots of issues, such as: - When transitioning from display manager to desktop session, i2c-hid was closed and opened, so the device was set to SLEEP and ON in a short period. Vendors confirmed that their devices can't handle fast ON/SLEEP command because Windows doesn't have this behavior. - When rebooting, i2c-hid was closed, and the driver core put the device back to full power before shutdown. This behavior also triggers a quick SLEEP and ON commands that some devices can't handle, renders an unusable touchpad after reboot. - Most importantly, my power meter reports little to none energy saving when i2c-hid is runtime suspended. So let's remove runtime power management since there is no actual benefit. Signed-off-by: Kai-Heng Feng --- v2: - Remove unused label and wording change. drivers/hid/i2c-hid/i2c-hid-core.c | 118 ++--------------------------- 1 file changed, 7 insertions(+), 111 deletions(-) diff --git a/drivers/hid/i2c-hid/i2c-hid-core.c b/drivers/hid/i2c-hid/i2c-hid-core.c index 2a7c6e33bb1c..d9c55e30f986 100644 --- a/drivers/hid/i2c-hid/i2c-hid-core.c +++ b/drivers/hid/i2c-hid/i2c-hid-core.c @@ -26,7 +26,6 @@ #include #include #include -#include #include #include #include @@ -48,8 +47,6 @@ /* quirks to control the device */ #define I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV BIT(0) #define I2C_HID_QUIRK_NO_IRQ_AFTER_RESET BIT(1) -#define I2C_HID_QUIRK_NO_RUNTIME_PM BIT(2) -#define I2C_HID_QUIRK_DELAY_AFTER_SLEEP BIT(3) #define I2C_HID_QUIRK_BOGUS_IRQ BIT(4) /* flags */ @@ -172,14 +169,7 @@ static const struct i2c_hid_quirks { { USB_VENDOR_ID_WEIDA, HID_ANY_ID, I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV }, { I2C_VENDOR_ID_HANTICK, I2C_PRODUCT_ID_HANTICK_5288, - I2C_HID_QUIRK_NO_IRQ_AFTER_RESET | - I2C_HID_QUIRK_NO_RUNTIME_PM }, - { I2C_VENDOR_ID_RAYDIUM, I2C_PRODUCT_ID_RAYDIUM_4B33, - I2C_HID_QUIRK_DELAY_AFTER_SLEEP }, - { USB_VENDOR_ID_LG, I2C_DEVICE_ID_LG_8001, - I2C_HID_QUIRK_NO_RUNTIME_PM }, - { I2C_VENDOR_ID_GOODIX, I2C_DEVICE_ID_GOODIX_01F0, - I2C_HID_QUIRK_NO_RUNTIME_PM }, + I2C_HID_QUIRK_NO_IRQ_AFTER_RESET }, { USB_VENDOR_ID_ELAN, HID_ANY_ID, I2C_HID_QUIRK_BOGUS_IRQ }, { 0, 0 } @@ -397,7 +387,6 @@ static int i2c_hid_set_power(struct i2c_client *client, int power_state) { struct i2c_hid *ihid = i2c_get_clientdata(client); int ret; - unsigned long now, delay; i2c_hid_dbg(ihid, "%s\n", __func__); @@ -415,22 +404,9 @@ static int i2c_hid_set_power(struct i2c_client *client, int power_state) goto set_pwr_exit; } - if (ihid->quirks & I2C_HID_QUIRK_DELAY_AFTER_SLEEP && - power_state == I2C_HID_PWR_ON) { - now = jiffies; - if (time_after(ihid->sleep_delay, now)) { - delay = jiffies_to_usecs(ihid->sleep_delay - now); - usleep_range(delay, delay + 1); - } - } - ret = __i2c_hid_command(client, &hid_set_power_cmd, power_state, 0, NULL, 0, NULL, 0); - if (ihid->quirks & I2C_HID_QUIRK_DELAY_AFTER_SLEEP && - power_state == I2C_HID_PWR_SLEEP) - ihid->sleep_delay = jiffies + msecs_to_jiffies(20); - if (ret) dev_err(&client->dev, "failed to change power setting.\n"); @@ -791,11 +767,6 @@ static int i2c_hid_open(struct hid_device *hid) { struct i2c_client *client = hid->driver_data; struct i2c_hid *ihid = i2c_get_clientdata(client); - int ret = 0; - - ret = pm_runtime_get_sync(&client->dev); - if (ret < 0) - return ret; set_bit(I2C_HID_STARTED, &ihid->flags); return 0; @@ -807,27 +778,6 @@ static void i2c_hid_close(struct hid_device *hid) struct i2c_hid *ihid = i2c_get_clientdata(client); clear_bit(I2C_HID_STARTED, &ihid->flags); - - /* Save some power */ - pm_runtime_put(&client->dev); -} - -static int i2c_hid_power(struct hid_device *hid, int lvl) -{ - struct i2c_client *client = hid->driver_data; - struct i2c_hid *ihid = i2c_get_clientdata(client); - - i2c_hid_dbg(ihid, "%s lvl:%d\n", __func__, lvl); - - switch (lvl) { - case PM_HINT_FULLON: - pm_runtime_get_sync(&client->dev); - break; - case PM_HINT_NORMAL: - pm_runtime_put(&client->dev); - break; - } - return 0; } struct hid_ll_driver i2c_hid_ll_driver = { @@ -836,7 +786,6 @@ struct hid_ll_driver i2c_hid_ll_driver = { .stop = i2c_hid_stop, .open = i2c_hid_open, .close = i2c_hid_close, - .power = i2c_hid_power, .output_report = i2c_hid_output_report, .raw_request = i2c_hid_raw_request, }; @@ -1104,9 +1053,6 @@ static int i2c_hid_probe(struct i2c_client *client, i2c_hid_acpi_fix_up_power(&client->dev); - pm_runtime_get_noresume(&client->dev); - pm_runtime_set_active(&client->dev); - pm_runtime_enable(&client->dev); device_enable_async_suspend(&client->dev); /* Make sure there is something at this address */ @@ -1114,16 +1060,16 @@ static int i2c_hid_probe(struct i2c_client *client, if (ret < 0) { dev_dbg(&client->dev, "nothing at this address: %d\n", ret); ret = -ENXIO; - goto err_pm; + goto err_regulator; } ret = i2c_hid_fetch_hid_descriptor(ihid); if (ret < 0) - goto err_pm; + goto err_regulator; ret = i2c_hid_init_irq(client); if (ret < 0) - goto err_pm; + goto err_regulator; hid = hid_allocate_device(); if (IS_ERR(hid)) { @@ -1154,9 +1100,6 @@ static int i2c_hid_probe(struct i2c_client *client, goto err_mem_free; } - if (!(ihid->quirks & I2C_HID_QUIRK_NO_RUNTIME_PM)) - pm_runtime_put(&client->dev); - return 0; err_mem_free: @@ -1165,10 +1108,6 @@ static int i2c_hid_probe(struct i2c_client *client, err_irq: free_irq(client->irq, ihid); -err_pm: - pm_runtime_put_noidle(&client->dev); - pm_runtime_disable(&client->dev); - err_regulator: regulator_bulk_disable(ARRAY_SIZE(ihid->pdata.supplies), ihid->pdata.supplies); @@ -1181,12 +1120,6 @@ static int i2c_hid_remove(struct i2c_client *client) struct i2c_hid *ihid = i2c_get_clientdata(client); struct hid_device *hid; - if (!(ihid->quirks & I2C_HID_QUIRK_NO_RUNTIME_PM)) - pm_runtime_get_sync(&client->dev); - pm_runtime_disable(&client->dev); - pm_runtime_set_suspended(&client->dev); - pm_runtime_put_noidle(&client->dev); - hid = ihid->hid; hid_destroy_device(hid); @@ -1219,25 +1152,15 @@ static int i2c_hid_suspend(struct device *dev) int wake_status; if (hid->driver && hid->driver->suspend) { - /* - * Wake up the device so that IO issues in - * HID driver's suspend code can succeed. - */ - ret = pm_runtime_resume(dev); - if (ret < 0) - return ret; - ret = hid->driver->suspend(hid, PMSG_SUSPEND); if (ret < 0) return ret; } - if (!pm_runtime_suspended(dev)) { - /* Save some power */ - i2c_hid_set_power(client, I2C_HID_PWR_SLEEP); + /* Save some power */ + i2c_hid_set_power(client, I2C_HID_PWR_SLEEP); - disable_irq(client->irq); - } + disable_irq(client->irq); if (device_may_wakeup(&client->dev)) { wake_status = enable_irq_wake(client->irq); @@ -1279,11 +1202,6 @@ static int i2c_hid_resume(struct device *dev) wake_status); } - /* We'll resume to full power */ - pm_runtime_disable(dev); - pm_runtime_set_active(dev); - pm_runtime_enable(dev); - enable_irq(client->irq); /* Instead of resetting device, simply powers the device on. This @@ -1304,30 +1222,8 @@ static int i2c_hid_resume(struct device *dev) } #endif -#ifdef CONFIG_PM -static int i2c_hid_runtime_suspend(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - - i2c_hid_set_power(client, I2C_HID_PWR_SLEEP); - disable_irq(client->irq); - return 0; -} - -static int i2c_hid_runtime_resume(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - - enable_irq(client->irq); - i2c_hid_set_power(client, I2C_HID_PWR_ON); - return 0; -} -#endif - static const struct dev_pm_ops i2c_hid_pm = { SET_SYSTEM_SLEEP_PM_OPS(i2c_hid_suspend, i2c_hid_resume) - SET_RUNTIME_PM_OPS(i2c_hid_runtime_suspend, i2c_hid_runtime_resume, - NULL) }; static const struct i2c_device_id i2c_hid_id_table[] = {