diff mbox series

[v11,44/56] Input: atmel_mxt_ts: Limit the max bytes transferred in an i2c transaction

Message ID 20200508055656.96389-45-jiada_wang@mentor.com (mailing list archive)
State New, archived
Headers show
Series atmel_mxt_ts misc | expand

Commit Message

Wang, Jiada May 8, 2020, 5:56 a.m. UTC
From: Balasubramani Vivekanandan <balasubramani_vivekanandan@mentor.com>

Some I2C controllers constrain maximum transferred data in an I2C
transaction by set max_[read|write]_len of i2c_adapter_quirk.
Large i2c read transaction beyond this limitation may fail to complete,
cause I2C controller driver aborts the transaction and returns failure.

Therefore this patch was created to split the large i2c transaction into
smaller chunks which can complete
within the max_read_len defined by I2C controller driver.

Signed-off-by: Balasubramani Vivekanandan <balasubramani_vivekanandan@mentor.com>
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
CC: Dmitry Osipenko <digetx@gmail.com>
---
 drivers/input/touchscreen/atmel_mxt_ts.c | 62 ++++++++++++++++++------
 1 file changed, 48 insertions(+), 14 deletions(-)
diff mbox series

Patch

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index c9ff450fa193..ed850a0bae69 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -1463,11 +1463,34 @@  static int mxt_read_and_process_messages(struct mxt_data *data, u8 count)
 	return num_valid;
 }
 
+static u8 mxt_max_msg_read_count(struct mxt_data *data, u8 max_T5_msg_count)
+{
+	struct i2c_client *client = data->client;
+	u16 max_read_len = client->adapter->quirks->max_read_len;
+	u8 T5_msg_count_limit = max_read_len / data->T5_msg_size;
+
+	if (!max_read_len)
+		return max_T5_msg_count;
+
+	if (max_read_len < data->T5_msg_size) {
+		WARN(1, "max read length is lesser than the T5 message size\n");
+		/* Return count of 1, as fallback */
+		return 1;
+	}
+	/*
+	 * Return maximum number of T5 messages in single i2c transaction
+	 * based on max read length.
+	 */
+	return min(T5_msg_count_limit, max_T5_msg_count);
+}
+
 static irqreturn_t mxt_process_messages_t44(struct mxt_data *data)
 {
 	struct device *dev = &data->client->dev;
 	int ret;
-	u8 count, num_left;
+	u8 T5_msg_count, total_pending;
+	u8 total_processed = 0;
+	u8 processed_valid = 0;
 
 	/* Read T44 and T5 together */
 	ret = __mxt_read_reg(data->client, data->T44_address,
@@ -1477,18 +1500,19 @@  static irqreturn_t mxt_process_messages_t44(struct mxt_data *data)
 		return IRQ_NONE;
 	}
 
-	count = data->msg_buf[0];
+	T5_msg_count = data->msg_buf[0];
 
 	/*
 	 * This condition may be caused by the CHG line being configured in
 	 * Mode 0. It results in unnecessary I2C operations but it is benign.
 	 */
-	if (count == 0)
+	if (!T5_msg_count)
 		return IRQ_NONE;
 
-	if (count > data->max_reportid) {
-		dev_warn(dev, "T44 count %d exceeded max report id\n", count);
-		count = data->max_reportid;
+	if (T5_msg_count > data->max_reportid) {
+		dev_warn(dev, "T44 count %d exceeded max report id\n",
+			 T5_msg_count);
+		T5_msg_count = data->max_reportid;
 	}
 
 	/* Process first message */
@@ -1498,16 +1522,25 @@  static irqreturn_t mxt_process_messages_t44(struct mxt_data *data)
 		return IRQ_NONE;
 	}
 
-	num_left = count - 1;
+	total_pending = T5_msg_count - 1;
+	if (!total_pending)
+		goto end;
 
 	/* Process remaining messages if necessary */
-	if (num_left) {
-		ret = mxt_read_and_process_messages(data, num_left);
+	T5_msg_count = mxt_max_msg_read_count(data, total_pending);
+
+	do {
+		if ((total_pending - total_processed) < T5_msg_count)
+			T5_msg_count = total_pending - total_processed;
+		ret = mxt_read_and_process_messages(data, T5_msg_count);
 		if (ret < 0)
 			goto end;
-		else if (ret != num_left)
-			dev_warn(dev, "Unexpected invalid message\n");
-	}
+		total_processed += T5_msg_count;
+		processed_valid += ret;
+	} while (total_processed < total_pending);
+
+	if (processed_valid != total_pending)
+		dev_warn(dev, "Unexpected invalid message\n");
 
 end:
 	if (data->update_input) {
@@ -1522,9 +1555,10 @@  static int mxt_process_messages_until_invalid(struct mxt_data *data)
 {
 	struct device *dev = &data->client->dev;
 	int count, read;
-	u8 tries = 2;
+	int tries;
 
-	count = data->max_reportid;
+	count = mxt_max_msg_read_count(data, data->max_reportid);
+	tries = (data->max_reportid / count) + 1;
 
 	/* Read messages until we force an invalid */
 	do {