@@ -3,7 +3,7 @@
# HID driver configuration
#
menu "HID support"
- depends on INPUT
+ depends on INPUT
config HID
tristate "HID bus support"
@@ -32,62 +32,62 @@ config HID_BATTERY_STRENGTH
select POWER_SUPPLY
default n
help
- This option adds support of reporting battery strength (for HID devices
- that support this feature) through power_supply class so that userspace
- tools, such as upower, can display it.
+ This option adds support of reporting battery strength (for HID devices
+ that support this feature) through power_supply class so that userspace
+ tools, such as upower, can display it.
config HIDRAW
bool "/dev/hidraw raw HID device support"
depends on HID
help
- Say Y here if you want to support HID devices (from the USB
- specification standpoint) that aren't strictly user interface
- devices, like monitor controls and Uninterruptible Power Supplies.
-
- This module supports these devices separately using a separate
- event interface on /dev/hidraw.
-
- There is also a /dev/hiddev configuration option in the USB HID
- configuration menu. In comparison to hiddev, this device does not process
- the hid events at all (no parsing, no lookups). This lets applications
- to work on raw hid events when they want to, and avoid using transport-specific
- userspace libhid/libusb libraries.
+ Say Y here if you want to support HID devices (from the USB
+ specification standpoint) that aren't strictly user interface
+ devices, like monitor controls and Uninterruptible Power Supplies.
+
+ This module supports these devices separately using a separate
+ event interface on /dev/hidraw.
+
+ There is also a /dev/hiddev configuration option in the USB HID
+ configuration menu. In comparison to hiddev, this device does not process
+ the hid events at all (no parsing, no lookups). This lets applications
+ to work on raw hid events when they want to, and avoid using
+ transport-specific userspace libhid/libusb libraries.
- If unsure, say Y.
+ If unsure, say Y.
config UHID
tristate "User-space I/O driver support for HID subsystem"
depends on HID
default n
help
- Say Y here if you want to provide HID I/O Drivers from user-space.
- This allows to write I/O drivers in user-space and feed the data from
- the device into the kernel. The kernel parses the HID reports, loads the
- corresponding HID Device Driver or provides input devices on top of your
- user-space device.
-
- This driver cannot be used to parse HID-reports in user-space and write
- special HID-drivers. You should use hidraw for that.
- Instead, this driver allows to write the transport-layer driver in
- user-space like USB-HID and Bluetooth-HID do in kernel-space.
+ Say Y here if you want to provide HID I/O Drivers from user-space.
+ This allows to write I/O drivers in user-space and feed the data from
+ the device into the kernel. The kernel parses the HID reports, loads the
+ corresponding HID Device Driver or provides input devices on top of your
+ user-space device.
+
+ This driver cannot be used to parse HID-reports in user-space and write
+ special HID-drivers. You should use hidraw for that.
+ Instead, this driver allows to write the transport-layer driver in
+ user-space like USB-HID and Bluetooth-HID do in kernel-space.
- If unsure, say N.
+ If unsure, say N.
- To compile this driver as a module, choose M here: the
- module will be called uhid.
+ To compile this driver as a module, choose M here: the
+ module will be called uhid.
config HID_GENERIC
tristate "Generic HID driver"
depends on HID
default HID
help
- Support for generic devices on the HID bus. This includes most
- keyboards and mice, joysticks, tablets and digitizers.
+ Support for generic devices on the HID bus. This includes most
+ keyboards and mice, joysticks, tablets and digitizers.
- To compile this driver as a module, choose M here: the module
- will be called hid-generic.
+ To compile this driver as a module, choose M here: the module
+ will be called hid-generic.
- If unsure, say Y.
+ If unsure, say Y.
menu "Special HID drivers"
depends on HID
@@ -97,7 +97,7 @@ config HID_A4TECH
depends on HID
default !EXPERT
help
- Support for A4 tech X5 and WOP-35 / Trust 450L mice.
+ Support for A4 tech X5 and WOP-35 / Trust 450L mice.
config HID_ACCUTOUCH
tristate "Accutouch touch device"
@@ -107,7 +107,7 @@ config HID_ACCUTOUCH
The driver works around a problem in the reported device capabilities
which causes userspace to detect the device as a mouse rather than
- a touchscreen.
+ a touchscreen.
Say Y here if you have a Accutouch 2216 touch controller.
@@ -115,37 +115,37 @@ config HID_ACRUX
tristate "ACRUX game controller support"
depends on HID
help
- Say Y here if you want to enable support for ACRUX game controllers.
+ Say Y here if you want to enable support for ACRUX game controllers.
config HID_ACRUX_FF
bool "ACRUX force feedback support"
depends on HID_ACRUX
select INPUT_FF_MEMLESS
help
- Say Y here if you want to enable force feedback support for ACRUX
- game controllers.
+ Say Y here if you want to enable force feedback support for ACRUX
+ game controllers.
config HID_APPLE
tristate "Apple {i,Power,Mac}Books"
depends on HID
default !EXPERT
help
- Support for some Apple devices which less or more break
- HID specification.
+ Support for some Apple devices which less or more break
+ HID specification.
- Say Y here if you want support for keyboards of Apple iBooks, PowerBooks,
- MacBooks, MacBook Pros and Apple Aluminum.
+ Say Y here if you want support for keyboards of Apple iBooks, PowerBooks,
+ MacBooks, MacBook Pros and Apple Aluminum.
config HID_APPLEIR
tristate "Apple infrared receiver"
depends on (USB_HID)
help
- Support for Apple infrared remote control. All the Apple computers from
+ Support for Apple infrared remote control. All the Apple computers from
2005 onwards include such a port, except the unibody Macbook (2009),
and Mac Pros. This receiver is also used in the Apple TV set-top box
prior to the 2010 model.
- Say Y here if you want support for Apple infrared remote control.
+ Say Y here if you want support for Apple infrared remote control.
config HID_ASUS
tristate "Asus"
@@ -154,37 +154,38 @@ config HID_ASUS
depends on ASUS_WMI || ASUS_WMI=n
select POWER_SUPPLY
help
- Support for Asus notebook built-in keyboard and touchpad via i2c, and
- the Asus Republic of Gamers laptop keyboard special keys.
+ Support for Asus notebook built-in keyboard and touchpad via i2c, and
+ the Asus Republic of Gamers laptop keyboard special keys.
- Supported devices:
- - EeeBook X205TA
- - VivoBook E200HA
- - GL553V series
- - GL753V series
+ Supported devices:
+ - EeeBook X205TA
+ - VivoBook E200HA
+ - GL553V series
+ - GL753V series
config HID_AUREAL
tristate "Aureal"
depends on HID
help
- Support for Aureal Cy se W-01RN Remote Controller and other Aureal derived remotes.
+ Support for Aureal Cy se W-01RN Remote Controller and other Aureal
+ derived remotes.
config HID_BELKIN
tristate "Belkin Flip KVM and Wireless keyboard"
depends on HID
default !EXPERT
help
- Support for Belkin Flip KVM and Wireless keyboard.
+ Support for Belkin Flip KVM and Wireless keyboard.
config HID_BETOP_FF
tristate "Betop Production Inc. force feedback support"
depends on USB_HID
select INPUT_FF_MEMLESS
help
- Say Y here if you want to enable force feedback support for devices by
- BETOP Production Ltd.
- Currently the following devices are known to be supported:
- - BETOP 2185 PC & BFM MODE
+ Say Y here if you want to enable force feedback support for devices by
+ BETOP Production Ltd.
+ Currently the following devices are known to be supported:
+ - BETOP 2185 PC & BFM MODE
config HID_BIGBEN_FF
tristate "BigBen Interactive Kids' gamepad support"
@@ -203,54 +204,54 @@ config HID_CHERRY
depends on HID
default !EXPERT
help
- Support for Cherry Cymotion keyboard.
+ Support for Cherry Cymotion keyboard.
config HID_CHICONY
tristate "Chicony devices"
depends on HID
default !EXPERT
help
- Support for Chicony Tactical pad and special keys on Chicony keyboards.
+ Support for Chicony Tactical pad and special keys on Chicony keyboards.
config HID_CORSAIR
tristate "Corsair devices"
depends on HID && USB && LEDS_CLASS
help
- Support for Corsair devices that are not fully compliant with the
- HID standard.
+ Support for Corsair devices that are not fully compliant with the
+ HID standard.
- Supported devices:
- - Vengeance K90
- - Scimitar PRO RGB
+ Supported devices:
+ - Vengeance K90
+ - Scimitar PRO RGB
config HID_COUGAR
tristate "Cougar devices"
depends on HID
help
- Support for Cougar devices that are not fully compliant with the
- HID standard.
+ Support for Cougar devices that are not fully compliant with the
+ HID standard.
- Supported devices:
- - Cougar 500k Gaming Keyboard
+ Supported devices:
+ - Cougar 500k Gaming Keyboard
config HID_MACALLY
tristate "Macally devices"
depends on HID
help
- Support for Macally devices that are not fully compliant with the
- HID standard.
+ Support for Macally devices that are not fully compliant with the
+ HID standard.
- supported devices:
- - Macally ikey keyboard
+ Supported devices:
+ - Macally ikey keyboard
config HID_PRODIKEYS
tristate "Prodikeys PC-MIDI Keyboard support"
depends on HID && SND
select SND_RAWMIDI
help
- Support for Prodikeys PC-MIDI Keyboard device support.
- Say Y here to enable support for this device.
- - Prodikeys PC-MIDI keyboard.
+ Support for Prodikeys PC-MIDI Keyboard device support.
+ Say Y here to enable support for this device.
+ - Prodikeys PC-MIDI keyboard.
The Prodikeys PC-MIDI acts as a USB Audio device, with one MIDI
input and one MIDI output. These MIDI jacks appear as
a sound "card" in the ALSA sound system.
@@ -262,76 +263,76 @@ config HID_CMEDIA
tristate "CMedia CM6533 HID audio jack controls"
depends on HID
help
- Support for CMedia CM6533 HID audio jack controls.
+ Support for CMedia CM6533 HID audio jack controls.
config HID_CP2112
tristate "Silicon Labs CP2112 HID USB-to-SMBus Bridge support"
depends on USB_HID && HIDRAW && I2C && GPIOLIB
select GPIOLIB_IRQCHIP
help
- Support for Silicon Labs CP2112 HID USB to SMBus Master Bridge.
- This is a HID device driver which registers as an i2c adapter
- and gpiochip to expose these functions of the CP2112. The
- customizable USB descriptor fields are exposed as sysfs attributes.
+ Support for Silicon Labs CP2112 HID USB to SMBus Master Bridge.
+ This is a HID device driver which registers as an i2c adapter
+ and gpiochip to expose these functions of the CP2112. The
+ customizable USB descriptor fields are exposed as sysfs attributes.
config HID_CREATIVE_SB0540
tristate "Creative SB0540 infrared receiver"
depends on USB_HID
help
- Support for Creative infrared SB0540-compatible remote controls, such
- as the RM-1500 and RM-1800 remotes.
+ Support for Creative infrared SB0540-compatible remote controls, such
+ as the RM-1500 and RM-1800 remotes.
- Say Y here if you want support for Creative SB0540 infrared receiver.
+ Say Y here if you want support for Creative SB0540 infrared receiver.
config HID_CYPRESS
tristate "Cypress mouse and barcode readers"
depends on HID
default !EXPERT
help
- Support for cypress mouse and barcode readers.
+ Support for Cypress mouse and barcode readers.
config HID_DRAGONRISE
tristate "DragonRise Inc. game controller"
depends on HID
help
- Say Y here if you have DragonRise Inc. game controllers.
- These might be branded as:
- - Tesun USB-703
- - Media-tech MT1504 "Rogue"
- - DVTech JS19 "Gear"
- - Defender Game Master
+ Say Y here if you have DragonRise Inc. game controllers.
+ These might be branded as:
+ - Tesun USB-703
+ - Media-tech MT1504 "Rogue"
+ - DVTech JS19 "Gear"
+ - Defender Game Master
config DRAGONRISE_FF
bool "DragonRise Inc. force feedback"
depends on HID_DRAGONRISE
select INPUT_FF_MEMLESS
help
- Say Y here if you want to enable force feedback support for DragonRise Inc.
- game controllers.
+ Say Y here if you want to enable force feedback support for DragonRise
+ Inc. game controllers.
config HID_EMS_FF
tristate "EMS Production Inc. force feedback support"
depends on HID
select INPUT_FF_MEMLESS
help
- Say Y here if you want to enable force feedback support for devices by
- EMS Production Ltd.
- Currently the following devices are known to be supported:
- - Trio Linker Plus II
+ Say Y here if you want to enable force feedback support for devices by
+ EMS Production Ltd.
+ Currently the following devices are known to be supported:
+ - Trio Linker Plus II
config HID_ELAN
tristate "ELAN USB Touchpad Support"
depends on LEDS_CLASS && USB_HID
help
- Say Y to enable support for the USB ELAN touchpad
- Currently the following devices are known to be supported:
- - HP Pavilion X2 10-p0XX.
+ Say Y to enable support for the USB ELAN touchpad.
+ Currently the following devices are known to be supported:
+ - HP Pavilion X2 10-p0XX.
config HID_ELECOM
tristate "ELECOM HID devices"
depends on HID
help
- Support for ELECOM devices:
+ Support for ELECOM devices:
- BM084 Bluetooth Mouse
- EX-G Trackballs (M-XT3DRBK, M-XT3URBK)
- DEFT Trackballs (M-DT1DRBK, M-DT1URBK, M-DT2DRBK, M-DT2URBK)
@@ -341,27 +342,27 @@ config HID_ELO
tristate "ELO USB 4000/4500 touchscreen"
depends on USB_HID
help
- Support for the ELO USB 4000/4500 touchscreens. Note that this is for
- different devices than those handled by CONFIG_TOUCHSCREEN_USB_ELO.
+ Support for the ELO USB 4000/4500 touchscreens. Note that this is for
+ different devices than those handled by CONFIG_TOUCHSCREEN_USB_ELO.
config HID_EZKEY
tristate "Ezkey BTC 8193 keyboard"
depends on HID
default !EXPERT
help
- Support for Ezkey BTC 8193 keyboard.
+ Support for Ezkey BTC 8193 keyboard.
config HID_GEMBIRD
tristate "Gembird Joypad"
depends on HID
help
- Support for Gembird JPD-DualForce 2.
+ Support for Gembird JPD-DualForce 2.
config HID_GFRM
tristate "Google Fiber TV Box remote control support"
depends on HID
help
- Support for Google Fiber TV Box remote controls
+ Support for Google Fiber TV Box remote controls
config HID_GLORIOUS
tristate "Glorious PC Gaming Race mice"
@@ -374,7 +375,7 @@ config HID_HOLTEK
tristate "Holtek HID devices"
depends on USB_HID
help
- Support for Holtek based devices:
+ Support for Holtek based devices:
- Holtek On Line Grip based game controller
- Trust GXT 18 Gaming Keyboard
- Sharkoon Drakonia / Perixx MX-2000 gaming mice
@@ -395,7 +396,7 @@ config HID_GOOGLE_HAMMER
tristate "Google Hammer Keyboard"
depends on USB_HID && LEDS_CLASS && CROS_EC
help
- Say Y here if you have a Google Hammer device.
+ Say Y here if you have a Google Hammer device.
config HID_VIVALDI
tristate "Vivaldi Keyboard"
@@ -410,45 +411,45 @@ config HID_GT683R
tristate "MSI GT68xR LED support"
depends on LEDS_CLASS && USB_HID
help
- Say Y here if you want to enable support for the three MSI GT68xR LEDs
+ Say Y here if you want to enable support for the three MSI GT68xR LEDs
- This driver support following modes:
+ This driver support following modes:
- Normal: LEDs are fully on when enabled
- Audio: LEDs brightness depends on sound level
- Breathing: LEDs brightness varies at human breathing rate
- Currently the following devices are know to be supported:
+ Currently the following devices are know to be supported:
- MSI GT683R
config HID_KEYTOUCH
tristate "Keytouch HID devices"
depends on HID
help
- Support for Keytouch HID devices not fully compliant with
- the specification. Currently supported:
+ Support for Keytouch HID devices not fully compliant with
+ the specification. Currently supported:
- Keytouch IEC 60945
config HID_KYE
tristate "KYE/Genius devices"
depends on HID
help
- Support for KYE/Genius devices not fully compliant with HID standard:
- - Ergo Mouse
- - EasyPen i405X tablet
- - MousePen i608X tablet
- - EasyPen M610X tablet
+ Support for KYE/Genius devices not fully compliant with HID standard:
+ - Ergo Mouse
+ - EasyPen i405X tablet
+ - MousePen i608X tablet
+ - EasyPen M610X tablet
config HID_UCLOGIC
tristate "UC-Logic"
depends on USB_HID
help
- Support for UC-Logic and Huion tablets.
+ Support for UC-Logic and Huion tablets.
config HID_WALTOP
tristate "Waltop"
depends on HID
help
- Support for Waltop tablets.
+ Support for Waltop tablets.
config HID_VIEWSONIC
tristate "ViewSonic/Signotec"
@@ -460,68 +461,68 @@ config HID_GYRATION
tristate "Gyration remote control"
depends on HID
help
- Support for Gyration remote control.
+ Support for Gyration remote control.
config HID_ICADE
tristate "ION iCade arcade controller"
depends on HID
help
- Support for the ION iCade arcade controller to work as a joystick.
+ Support for the ION iCade arcade controller to work as a joystick.
- To compile this driver as a module, choose M here: the
- module will be called hid-icade.
+ To compile this driver as a module, choose M here: the
+ module will be called hid-icade.
config HID_ITE
tristate "ITE devices"
depends on HID
default !EXPERT
help
- Support for ITE devices not fully compliant with HID standard.
+ Support for ITE devices not fully compliant with HID standard.
config HID_JABRA
tristate "Jabra USB HID Driver"
depends on HID
help
- Support for Jabra USB HID devices.
+ Support for Jabra USB HID devices.
- Prevents mapping of vendor defined HID usages to input events. Without
- this driver HID reports from Jabra devices may incorrectly be seen as
- mouse button events.
- Say M here if you may ever plug in a Jabra USB device.
+ Prevents mapping of vendor defined HID usages to input events. Without
+ this driver HID reports from Jabra devices may incorrectly be seen as
+ mouse button events.
+ Say M here if you may ever plug in a Jabra USB device.
config HID_TWINHAN
tristate "Twinhan IR remote control"
depends on HID
help
- Support for Twinhan IR remote control.
+ Support for Twinhan IR remote control.
config HID_KENSINGTON
tristate "Kensington Slimblade Trackball"
depends on HID
default !EXPERT
help
- Support for Kensington Slimblade Trackball.
+ Support for Kensington Slimblade Trackball.
config HID_LCPOWER
tristate "LC-Power"
depends on HID
help
- Support for LC-Power RC1000MCE RF remote control.
+ Support for LC-Power RC1000MCE RF remote control.
config HID_LED
tristate "Simple RGB LED support"
depends on HID
depends on LEDS_CLASS
help
- Support for simple RGB LED devices. Currently supported are:
- - Riso Kagaku Webmail Notifier
- - Dream Cheeky Webmail Notifier and Friends Alert
- - ThingM blink(1)
- - Delcom Visual Signal Indicator Generation 2
- - Greynut Luxafor
+ Support for simple RGB LED devices. Currently supported are:
+ - Riso Kagaku Webmail Notifier
+ - Dream Cheeky Webmail Notifier and Friends Alert
+ - ThingM blink(1)
+ - Delcom Visual Signal Indicator Generation 2
+ - Greynut Luxafor
- To compile this driver as a module, choose M here: the
- module will be called hid-led.
+ To compile this driver as a module, choose M here: the
+ module will be called hid-led.
config HID_LENOVO
tristate "Lenovo / Thinkpad devices"
@@ -529,15 +530,16 @@ config HID_LENOVO
select NEW_LEDS
select LEDS_CLASS
help
- Support for IBM/Lenovo devices that are not fully compliant with HID standard.
+ Support for IBM/Lenovo devices that are not fully compliant with HID
+ standard.
- Say Y if you want support for horizontal scrolling of the IBM/Lenovo
- Scrollpoint mice or the non-compliant features of the Lenovo Thinkpad
- standalone keyboards, e.g:
- - ThinkPad USB Keyboard with TrackPoint (supports extra LEDs and trackpoint
- configuration)
- - ThinkPad Compact Bluetooth Keyboard with TrackPoint (supports Fn keys)
- - ThinkPad Compact USB Keyboard with TrackPoint (supports Fn keys)
+ Say Y if you want support for horizontal scrolling of the IBM/Lenovo
+ Scrollpoint mice or the non-compliant features of the Lenovo Thinkpad
+ standalone keyboards, e.g.:
+ - ThinkPad USB Keyboard with TrackPoint (supports extra LEDs and trackpoint
+ configuration)
+ - ThinkPad Compact Bluetooth Keyboard with TrackPoint (supports Fn keys)
+ - ThinkPad Compact USB Keyboard with TrackPoint (supports Fn keys)
config HID_LOGITECH
tristate "Logitech devices"
@@ -545,7 +547,8 @@ config HID_LOGITECH
depends on LEDS_CLASS
default !EXPERT
help
- Support for Logitech devices that are not fully compliant with HID standard.
+ Support for Logitech devices that are not fully compliant with HID
+ standard.
config HID_LOGITECH_DJ
tristate "Logitech receivers full support"
@@ -554,23 +557,23 @@ config HID_LOGITECH_DJ
depends on HID_LOGITECH
select HID_LOGITECH_HIDPP
help
- Say Y if you want support for Logitech receivers and devices.
- Logitech receivers are capable of pairing multiple Logitech compliant
- devices to the same receiver. Without this driver it will be handled by
- generic USB_HID driver and all incoming events will be multiplexed
- into a single mouse and a single keyboard device.
+ Say Y if you want support for Logitech receivers and devices.
+ Logitech receivers are capable of pairing multiple Logitech compliant
+ devices to the same receiver. Without this driver it will be handled by
+ generic USB_HID driver and all incoming events will be multiplexed
+ into a single mouse and a single keyboard device.
config HID_LOGITECH_HIDPP
tristate "Logitech HID++ devices support"
depends on HID_LOGITECH
select POWER_SUPPLY
help
- Support for Logitech devices relyingon the HID++ Logitech specification
+ Support for Logitech devices relying on the HID++ Logitech specification.
- Say Y if you want support for Logitech devices relying on the HID++
- specification. Such devices are the various Logitech Touchpads (T650,
- T651, TK820), some mice (Zone Touch mouse), or even keyboards (Solar
- Keyboard).
+ Say Y if you want support for Logitech devices relying on the HID++
+ specification. Such devices are the various Logitech Touchpads (T650,
+ T651, TK820), some mice (Zone Touch mouse), or even keyboards (Solar
+ Keyboard).
config LOGITECH_FF
bool "Logitech force feedback support"
@@ -631,32 +634,32 @@ config HID_MAGICMOUSE
tristate "Apple Magic Mouse/Trackpad multi-touch support"
depends on HID
help
- Support for the Apple Magic Mouse/Trackpad multi-touch.
+ Support for the Apple Magic Mouse/Trackpad multi-touch.
- Say Y here if you want support for the multi-touch features of the
- Apple Wireless "Magic" Mouse and the Apple Wireless "Magic" Trackpad.
+ Say Y here if you want support for the multi-touch features of the
+ Apple Wireless "Magic" Mouse and the Apple Wireless "Magic" Trackpad.
config HID_MALTRON
tristate "Maltron L90 keyboard"
depends on HID
help
- Adds support for the volume up, volume down, mute, and play/pause buttons
- of the Maltron L90 keyboard.
+ Adds support for the volume up, volume down, mute, and play/pause buttons
+ of the Maltron L90 keyboard.
config HID_MAYFLASH
tristate "Mayflash game controller adapter force feedback"
depends on HID
select INPUT_FF_MEMLESS
help
- Say Y here if you have HJZ Mayflash PS3 game controller adapters
- and want to enable force feedback support.
+ Say Y here if you have HJZ Mayflash PS3 game controller adapters
+ and want to enable force feedback support.
config HID_REDRAGON
tristate "Redragon keyboards"
depends on HID
default !EXPERT
help
- Support for Redragon keyboards that need fix-ups to work properly.
+ Support for Redragon keyboards that need fix-ups to work properly.
config HID_MICROSOFT
tristate "Microsoft non-fully HID-compliant devices"
@@ -664,14 +667,15 @@ config HID_MICROSOFT
default !EXPERT
select INPUT_FF_MEMLESS
help
- Support for Microsoft devices that are not fully compliant with HID standard.
+ Support for Microsoft devices that are not fully compliant with HID
+ standard.
config HID_MONTEREY
tristate "Monterey Genius KB29E keyboard"
depends on HID
default !EXPERT
help
- Support for Monterey Genius KB29E.
+ Support for Monterey Genius KB29E.
config HID_MULTITOUCH
tristate "HID Multitouch panels"
@@ -722,23 +726,23 @@ config HID_MULTITOUCH
config HID_NTI
tristate "NTI keyboard adapters"
help
- Support for the "extra" Sun keyboard keys on keyboards attached
- through Network Technologies USB-SUN keyboard adapters.
+ Support for the "extra" Sun keyboard keys on keyboards attached
+ through Network Technologies USB-SUN keyboard adapters.
config HID_NTRIG
tristate "N-Trig touch screen"
depends on USB_HID
help
- Support for N-Trig touch screen.
+ Support for N-Trig touch screen.
config HID_ORTEK
tristate "Ortek PKB-1700/WKB-2000/Skycable wireless keyboard and mouse trackpad"
depends on HID
help
- There are certain devices which have LogicalMaximum wrong in the keyboard
- usage page of their report descriptor. The most prevailing ones so far
- are manufactured by Ortek, thus the name of the driver. Currently
- supported devices by this driver are
+ There are certain devices which have LogicalMaximum wrong in the keyboard
+ usage page of their report descriptor. The most prevailing ones so far
+ are manufactured by Ortek, thus the name of the driver. Currently
+ supported devices by this driver are
- Ortek PKB-1700
- Ortek WKB-2000
@@ -765,7 +769,7 @@ config HID_PENMOUNT
help
This selects a driver for the PenMount 6000 touch controller.
- The driver works around a problem in the report descript allowing
+ The driver works around a problem in the report descriptor allowing
the userspace to touch events instead of mouse events.
Say Y here if you have a Penmount based touch controller.
@@ -774,7 +778,7 @@ config HID_PETALYNX
tristate "Petalynx Maxter remote control"
depends on HID
help
- Support for Petalynx Maxter remote control.
+ Support for Petalynx Maxter remote control.
config HID_PICOLCD
tristate "PicoLCD (graphic version)"
@@ -786,7 +790,7 @@ config HID_PICOLCD
This includes support for the following device features:
- Keypad
- Switching between Firmware and Flash mode
- - EEProm / Flash access (via debugfs)
+ - EEProm / Flash access (via debugfs)
Features selectively enabled:
- Framebuffer for monochrome 256x64 display
- Backlight control
@@ -857,41 +861,41 @@ config HID_PRIMAX
tristate "Primax non-fully HID-compliant devices"
depends on HID
help
- Support for Primax devices that are not fully compliant with the
- HID standard.
+ Support for Primax devices that are not fully compliant with the
+ HID standard.
config HID_RETRODE
tristate "Retrode 2 USB adapter for vintage video games"
depends on USB_HID
help
- Support for
+ Support for
* Retrode 2 cartridge and controller adapter
config HID_ROCCAT
tristate "Roccat device support"
depends on USB_HID
help
- Support for Roccat devices.
- Say Y here if you have a Roccat mouse or keyboard and want
- support for its special functionalities.
+ Support for Roccat devices.
+ Say Y here if you have a Roccat mouse or keyboard and want
+ support for its special functionalities.
config HID_SAITEK
tristate "Saitek (Mad Catz) non-fully HID-compliant devices"
depends on HID
help
- Support for Saitek devices that are not fully compliant with the
- HID standard.
+ Support for Saitek devices that are not fully compliant with the
+ HID standard.
- Supported devices:
- - PS1000 Dual Analog Pad
- - Saitek R.A.T.7, R.A.T.9, M.M.O.7 Gaming Mice
- - Mad Catz R.A.T.5, R.A.T.9 Gaming Mice
+ Supported devices:
+ - PS1000 Dual Analog Pad
+ - Saitek R.A.T.7, R.A.T.9, M.M.O.7 Gaming Mice
+ - Mad Catz R.A.T.5, R.A.T.9 Gaming Mice
config HID_SAMSUNG
tristate "Samsung InfraRed remote control or keyboards"
depends on HID
help
- Support for Samsung InfraRed remote control or keyboards.
+ Support for Samsung InfraRed remote control or keyboards.
config HID_SONY
tristate "Sony PS2/3/4 accessories"
@@ -901,7 +905,7 @@ config HID_SONY
select POWER_SUPPLY
select CRC32
help
- Support for
+ Support for
* Sony PS3 6-axis controllers
* Sony PS4 DualShock 4 controllers
@@ -911,39 +915,39 @@ config HID_SONY
* Guitar Hero Live PS3 and Wii U guitar dongles
config SONY_FF
- bool "Sony PS2/3/4 accessories force feedback support"
+ bool "Sony PS2/3/4 accessories force feedback support"
depends on HID_SONY
select INPUT_FF_MEMLESS
help
- Say Y here if you have a Sony PS2/3/4 accessory and want to enable
- force feedback support for it.
+ Say Y here if you have a Sony PS2/3/4 accessory and want to enable
+ force feedback support for it.
config HID_SPEEDLINK
tristate "Speedlink VAD Cezanne mouse support"
depends on HID
help
- Support for Speedlink Vicious and Divine Cezanne mouse.
+ Support for Speedlink Vicious and Divine Cezanne mouse.
config HID_STEAM
tristate "Steam Controller support"
depends on HID
select POWER_SUPPLY
help
- Say Y here if you have a Steam Controller if you want to use it
- without running the Steam Client. It supports both the wired and
- the wireless adaptor.
+ Say Y here if you have a Steam Controller if you want to use it
+ without running the Steam Client. It supports both the wired and
+ the wireless adaptor.
config HID_STEELSERIES
tristate "Steelseries SRW-S1 steering wheel support"
depends on HID
help
- Support for Steelseries SRW-S1 steering wheel
+ Support for Steelseries SRW-S1 steering wheel.
config HID_SUNPLUS
tristate "Sunplus wireless desktop"
depends on HID
help
- Support for Sunplus wireless desktop.
+ Support for Sunplus wireless desktop.
config HID_RMI
tristate "Synaptics RMI4 device support"
@@ -954,9 +958,9 @@ config HID_RMI
select RMI4_F12
select RMI4_F30
help
- Support for Synaptics RMI4 touchpads.
- Say Y here if you have a Synaptics RMI4 touchpads over i2c-hid or usbhid
- and want support for its special functionalities.
+ Support for Synaptics RMI4 touchpads.
+ Say Y here if you have a Synaptics RMI4 touchpads over i2c-hid or usbhid
+ and want support for its special functionalities.
config HID_GREENASIA
tristate "GreenAsia (Product ID 0x12) game controller support"
@@ -970,33 +974,33 @@ config GREENASIA_FF
depends on HID_GREENASIA
select INPUT_FF_MEMLESS
help
- Say Y here if you have a GreenAsia (Product ID 0x12) based game controller
- (like MANTA Warrior MM816 and SpeedLink Strike2 SL-6635) or adapter
- and want to enable force feedback support for it.
+ Say Y here if you have a GreenAsia (Product ID 0x12) based game controller
+ (like MANTA Warrior MM816 and SpeedLink Strike2 SL-6635) or adapter
+ and want to enable force feedback support for it.
config HID_HYPERV_MOUSE
tristate "Microsoft Hyper-V mouse driver"
depends on HYPERV
help
- Select this option to enable the Hyper-V mouse driver.
+ Select this option to enable the Hyper-V mouse driver.
config HID_SMARTJOYPLUS
tristate "SmartJoy PLUS PS2/USB adapter support"
depends on HID
help
- Support for SmartJoy PLUS PS2/USB adapter, Super Dual Box,
- Super Joy Box 3 Pro, Super Dual Box Pro, and Super Joy Box 5 Pro.
+ Support for SmartJoy PLUS PS2/USB adapter, Super Dual Box,
+ Super Joy Box 3 Pro, Super Dual Box Pro, and Super Joy Box 5 Pro.
- Note that DDR (Dance Dance Revolution) mode is not supported, nor
- is pressure sensitive buttons on the pro models.
+ Note that DDR (Dance Dance Revolution) mode is not supported, nor
+ are pressure sensitive buttons on the Pro models.
config SMARTJOYPLUS_FF
bool "SmartJoy PLUS PS2/USB adapter force feedback support"
depends on HID_SMARTJOYPLUS
select INPUT_FF_MEMLESS
help
- Say Y here if you have a SmartJoy PLUS PS2/USB adapter and want to
- enable force feedback support for it.
+ Say Y here if you have a SmartJoy PLUS PS2/USB adapter and want to
+ enable force feedback support for it.
config HID_TIVO
tristate "TiVo Slide Bluetooth remote control support"
@@ -1008,8 +1012,8 @@ config HID_TOPSEED
tristate "TopSeed Cyberlink, BTC Emprex, Conceptronic remote control support"
depends on HID
help
- Say Y if you have a TopSeed Cyberlink or BTC Emprex or Conceptronic
- CLLRCMCE remote control.
+ Say Y if you have a TopSeed Cyberlink or BTC Emprex or Conceptronic
+ CLLRCMCE remote control.
config HID_THINGM
tristate "ThingM blink(1) USB RGB LED"
@@ -1017,9 +1021,9 @@ config HID_THINGM
depends on LEDS_CLASS
select HID_LED
help
- Support for the ThingM blink(1) USB RGB LED. This driver has been
- merged into the generic hid led driver. Config symbol HID_THINGM
- just selects HID_LED and will be removed soon.
+ Support for the ThingM blink(1) USB RGB LED. This driver has been
+ merged into the generic hid led driver. Config symbol HID_THINGM
+ just selects HID_LED and will be removed soon.
config HID_THRUSTMASTER
tristate "ThrustMaster devices support"
@@ -1081,31 +1085,31 @@ config HID_WIIMOTE
select POWER_SUPPLY
select INPUT_FF_MEMLESS
help
- Support for Nintendo Wii and Wii U Bluetooth peripherals. Supported
- devices are the Wii Remote and its extension devices, but also devices
- based on the Wii Remote like the Wii U Pro Controller or the
- Wii Balance Board.
-
- Support for all official Nintendo extensions is available, however, 3rd
- party extensions might not be supported. Please report these devices to:
- http://github.com/dvdhrm/xwiimote/issues
-
- Other Nintendo Wii U peripherals that are IEEE 802.11 based (including
- the Wii U Gamepad) might be supported in the future. But currently
- support is limited to Bluetooth based devices.
+ Support for Nintendo Wii and Wii U Bluetooth peripherals. Supported
+ devices are the Wii Remote and its extension devices, but also devices
+ based on the Wii Remote like the Wii U Pro Controller or the
+ Wii Balance Board.
+
+ Support for all official Nintendo extensions is available, however, 3rd
+ party extensions might not be supported. Please report these devices to:
+ http://github.com/dvdhrm/xwiimote/issues
+
+ Other Nintendo Wii U peripherals that are IEEE 802.11 based (including
+ the Wii U Gamepad) might be supported in the future. But currently
+ support is limited to Bluetooth based devices.
- If unsure, say N.
+ If unsure, say N.
- To compile this driver as a module, choose M here: the
- module will be called hid-wiimote.
+ To compile this driver as a module, choose M here: the
+ module will be called hid-wiimote.
config HID_XINMO
tristate "Xin-Mo non-fully compliant devices"
depends on HID
help
- Support for Xin-Mo devices that are not fully compliant with the HID
- standard. Currently only supports the Xin-Mo Dual Arcade. Say Y here
- if you have a Xin-Mo Dual Arcade controller.
+ Support for Xin-Mo devices that are not fully compliant with the HID
+ standard. Currently only supports the Xin-Mo Dual Arcade. Say Y here
+ if you have a Xin-Mo Dual Arcade controller.
config HID_ZEROPLUS
tristate "Zeroplus based game controller support"
@@ -1160,20 +1164,20 @@ config HID_ALPS
tristate "Alps HID device support"
depends on HID
help
- Support for Alps I2C HID touchpads and StickPointer.
- Say Y here if you have a Alps touchpads over i2c-hid or usbhid
- and want support for its special functionalities.
+ Support for Alps I2C HID touchpads and StickPointer.
+ Say Y here if you have a Alps touchpads over i2c-hid or usbhid
+ and want support for its special functionalities.
config HID_MCP2221
tristate "Microchip MCP2221 HID USB-to-I2C/SMbus host support"
depends on USB_HID && I2C
depends on GPIOLIB
help
- Provides I2C and SMBUS host adapter functionality over USB-HID
- through MCP2221 device.
+ Provides I2C and SMBUS host adapter functionality over USB-HID
+ through MCP2221 device.
- To compile this driver as a module, choose M here: the module
- will be called hid-mcp2221.ko.
+ To compile this driver as a module, choose M here: the module
+ will be called hid-mcp2221.ko.
endmenu
This is a large cleanup of drivers/hid/Kconfig: * Use tab instead of spaces for main menu "depends on INPUT". * Indent help text by 2 spaces (total of one tab + 2 spaces). * Convert 2 intra-line tabs to spaces. * Convert multiple spaces to one space in help text. * Reflow a few help text lines if they are too long (for a 80-character terminal). * Capitalize beginning of a phrase (for consistency). * Capitalize 2 product names. * Drop one trailing space. * End 2 sentences with a period ('.'). * Fix grammar: is -> are Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: linux-input@vger.kernel.org --- drivers/hid/Kconfig | 498 +++++++++++++++++++++--------------------- 1 file changed, 251 insertions(+), 247 deletions(-)