diff mbox series

Input: pm8941-pwrkey - respect reboot_mode for warm reset

Message ID 20210629030509.2893-1-shawn.guo@linaro.org (mailing list archive)
State Mainlined
Commit 9e5afc84ff94815ad10853420dcecdf33e9226f8
Headers show
Series Input: pm8941-pwrkey - respect reboot_mode for warm reset | expand

Commit Message

Shawn Guo June 29, 2021, 3:05 a.m. UTC
On some devices, e.g. Sony Xperia M4 Aqua, warm reset is used to reboot
device into bootloader and recovery mode.  Instead of always doing hard
reset, add a check on reboot_mode for possible warm reset.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 drivers/input/misc/pm8941-pwrkey.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

Comments

Luca Weiss July 11, 2021, 9:57 a.m. UTC | #1
Hi Shawn,

On Dienstag, 29. Juni 2021 05:05:09 CEST Shawn Guo wrote:
> On some devices, e.g. Sony Xperia M4 Aqua, warm reset is used to reboot
> device into bootloader and recovery mode.  Instead of always doing hard
> reset, add a check on reboot_mode for possible warm reset.
> 
> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
> ---
>  drivers/input/misc/pm8941-pwrkey.c | 6 +++++-
>  1 file changed, 5 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/input/misc/pm8941-pwrkey.c
> b/drivers/input/misc/pm8941-pwrkey.c index cf8104454e74..9b14d6eb1918
> 100644
> --- a/drivers/input/misc/pm8941-pwrkey.c
> +++ b/drivers/input/misc/pm8941-pwrkey.c
> @@ -27,6 +27,7 @@
>  #define PON_PS_HOLD_RST_CTL2		0x5b
>  #define  PON_PS_HOLD_ENABLE		BIT(7)
>  #define  PON_PS_HOLD_TYPE_MASK		0x0f
> +#define  PON_PS_HOLD_TYPE_WARM_RESET	1
>  #define  PON_PS_HOLD_TYPE_SHUTDOWN	4
>  #define  PON_PS_HOLD_TYPE_HARD_RESET	7
> 
> @@ -93,7 +94,10 @@ static int pm8941_reboot_notify(struct notifier_block
> *nb, break;
>  	case SYS_RESTART:
>  	default:
> -		reset_type = PON_PS_HOLD_TYPE_HARD_RESET;
> +		if (reboot_mode == REBOOT_WARM)

This doesn't compile with CONFIG_INPUT_PM8941_PWRKEY=m

 ERROR: modpost: "reboot_mode" [drivers/input/misc/pm8941-pwrkey.ko] undefined!

Also just to clarify, this is supposed to trigger when rebooting with 
LINUX_REBOOT_CMD_RESTART2 and adding an argument that way, right?

Regards
Luca

> +			reset_type = PON_PS_HOLD_TYPE_WARM_RESET;
> +		else
> +			reset_type = PON_PS_HOLD_TYPE_HARD_RESET;
>  		break;
>  	}
Shawn Guo July 14, 2021, 9:40 a.m. UTC | #2
Hi Luca,

On Sun, Jul 11, 2021 at 11:57:25AM +0200, Luca Weiss wrote:
> Hi Shawn,
> 
> On Dienstag, 29. Juni 2021 05:05:09 CEST Shawn Guo wrote:
> > On some devices, e.g. Sony Xperia M4 Aqua, warm reset is used to reboot
> > device into bootloader and recovery mode.  Instead of always doing hard
> > reset, add a check on reboot_mode for possible warm reset.
> > 
> > Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
> > ---
> >  drivers/input/misc/pm8941-pwrkey.c | 6 +++++-
> >  1 file changed, 5 insertions(+), 1 deletion(-)
> > 
> > diff --git a/drivers/input/misc/pm8941-pwrkey.c
> > b/drivers/input/misc/pm8941-pwrkey.c index cf8104454e74..9b14d6eb1918
> > 100644
> > --- a/drivers/input/misc/pm8941-pwrkey.c
> > +++ b/drivers/input/misc/pm8941-pwrkey.c
> > @@ -27,6 +27,7 @@
> >  #define PON_PS_HOLD_RST_CTL2		0x5b
> >  #define  PON_PS_HOLD_ENABLE		BIT(7)
> >  #define  PON_PS_HOLD_TYPE_MASK		0x0f
> > +#define  PON_PS_HOLD_TYPE_WARM_RESET	1
> >  #define  PON_PS_HOLD_TYPE_SHUTDOWN	4
> >  #define  PON_PS_HOLD_TYPE_HARD_RESET	7
> > 
> > @@ -93,7 +94,10 @@ static int pm8941_reboot_notify(struct notifier_block
> > *nb, break;
> >  	case SYS_RESTART:
> >  	default:
> > -		reset_type = PON_PS_HOLD_TYPE_HARD_RESET;
> > +		if (reboot_mode == REBOOT_WARM)
> 
> This doesn't compile with CONFIG_INPUT_PM8941_PWRKEY=m
> 
>  ERROR: modpost: "reboot_mode" [drivers/input/misc/pm8941-pwrkey.ko] undefined!

Thanks for the report!  I will add a patch to export the symbol.

> 
> Also just to clarify, this is supposed to trigger when rebooting with 
> LINUX_REBOOT_CMD_RESTART2 and adding an argument that way, right?

With either of the following two methods, 'reboot_mode' will be turned
into REBOOT_WARM.

- Boot kernel with 'reboot=warm' on cmdline

- Set warm mode via sysfs entry
  $ echo warm > /sys/kernel/reboot/mode

Shawn
Luca Weiss Feb. 26, 2022, 10:04 a.m. UTC | #3
Hi Shawn,

On Mittwoch, 14. Juli 2021 11:40:46 CET Shawn Guo wrote:
> Hi Luca,
> 
> On Sun, Jul 11, 2021 at 11:57:25AM +0200, Luca Weiss wrote:
> > Hi Shawn,
> > 
> > On Dienstag, 29. Juni 2021 05:05:09 CEST Shawn Guo wrote:
> > > On some devices, e.g. Sony Xperia M4 Aqua, warm reset is used to reboot
> > > device into bootloader and recovery mode.  Instead of always doing hard
> > > reset, add a check on reboot_mode for possible warm reset.
> > > 
> > > Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
> > > ---
> > > 
> > >  drivers/input/misc/pm8941-pwrkey.c | 6 +++++-
> > >  1 file changed, 5 insertions(+), 1 deletion(-)
> > > 
> > > diff --git a/drivers/input/misc/pm8941-pwrkey.c
> > > b/drivers/input/misc/pm8941-pwrkey.c index cf8104454e74..9b14d6eb1918
> > > 100644
> > > --- a/drivers/input/misc/pm8941-pwrkey.c
> > > +++ b/drivers/input/misc/pm8941-pwrkey.c
> > > @@ -27,6 +27,7 @@
> > > 
> > >  #define PON_PS_HOLD_RST_CTL2		0x5b
> > >  #define  PON_PS_HOLD_ENABLE		BIT(7)
> > >  #define  PON_PS_HOLD_TYPE_MASK		0x0f
> > > 
> > > +#define  PON_PS_HOLD_TYPE_WARM_RESET	1
> > > 
> > >  #define  PON_PS_HOLD_TYPE_SHUTDOWN	4
> > >  #define  PON_PS_HOLD_TYPE_HARD_RESET	7
> > > 
> > > @@ -93,7 +94,10 @@ static int pm8941_reboot_notify(struct notifier_block
> > > *nb, break;
> > > 
> > >  	case SYS_RESTART:
> > > 
> > >  	default:
> > > -		reset_type = PON_PS_HOLD_TYPE_HARD_RESET;
> > > +		if (reboot_mode == REBOOT_WARM)
> > 
> > This doesn't compile with CONFIG_INPUT_PM8941_PWRKEY=m
> > 
> >  ERROR: modpost: "reboot_mode" [drivers/input/misc/pm8941-pwrkey.ko]
> >  undefined!
> Thanks for the report!  I will add a patch to export the symbol.
> 
> > Also just to clarify, this is supposed to trigger when rebooting with
> > LINUX_REBOOT_CMD_RESTART2 and adding an argument that way, right?
> 
> With either of the following two methods, 'reboot_mode' will be turned
> into REBOOT_WARM.
> 
> - Boot kernel with 'reboot=warm' on cmdline
> 
> - Set warm mode via sysfs entry
>   $ echo warm > /sys/kernel/reboot/mode

+CC Sebastian Reichel

Do you have an idea how this situation should look from user space? Just using 
LINUX_REBOOT_CMD_RESTART2 with the param won't work if the reboot mode also 
has to be set to work - but that's also not the case on all boards.

Just LINUX_REBOOT_CMD_RESTART2 works fine on newer qcom SoCs that iirc store it 
in a pmic register that seems to survive a hard reboot.

Would it be a good idea to introduce a new dt property for e.g.
syscon-reboot-mode that makes it switch to warm reboot mode when a reboot mode 
is passed to the kernel? That way user space wouldn't need to care whether a 
particular board needs warm reboot or can just use the default hard reboot.

Regards
Luca

> Shawn
diff mbox series

Patch

diff --git a/drivers/input/misc/pm8941-pwrkey.c b/drivers/input/misc/pm8941-pwrkey.c
index cf8104454e74..9b14d6eb1918 100644
--- a/drivers/input/misc/pm8941-pwrkey.c
+++ b/drivers/input/misc/pm8941-pwrkey.c
@@ -27,6 +27,7 @@ 
 #define PON_PS_HOLD_RST_CTL2		0x5b
 #define  PON_PS_HOLD_ENABLE		BIT(7)
 #define  PON_PS_HOLD_TYPE_MASK		0x0f
+#define  PON_PS_HOLD_TYPE_WARM_RESET	1
 #define  PON_PS_HOLD_TYPE_SHUTDOWN	4
 #define  PON_PS_HOLD_TYPE_HARD_RESET	7
 
@@ -93,7 +94,10 @@  static int pm8941_reboot_notify(struct notifier_block *nb,
 		break;
 	case SYS_RESTART:
 	default:
-		reset_type = PON_PS_HOLD_TYPE_HARD_RESET;
+		if (reboot_mode == REBOOT_WARM)
+			reset_type = PON_PS_HOLD_TYPE_WARM_RESET;
+		else
+			reset_type = PON_PS_HOLD_TYPE_HARD_RESET;
 		break;
 	}