diff mbox series

[v2,32/46] mfd: ti_am335x_tscadc: Introduce has_tsc

Message ID 20210902215144.507243-33-miquel.raynal@bootlin.com (mailing list archive)
State New, archived
Headers show
Series TI AM437X ADC1 | expand

Commit Message

Miquel Raynal Sept. 2, 2021, 9:51 p.m. UTC
One way of knowing which hardware we are dealing with is to check its
compatible. When this must be done at several places, it's best to use a
proper boolean for that. ->has_tsc indicates if there is a touchscreen
controller available (meaning it's a am33xx-like ADC) or not but does
not indicate if it is actually used (that is the purpose of the use_tsc
boolean in the probe).

Introducing this boolean helps making a difference in the code between
what is generic to both types of ADCs and what is specific to the am33xx
hardware before introducing support for the am437x hardware.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/mfd/ti_am335x_tscadc.c       | 37 +++++++++++++++++-----------
 include/linux/mfd/ti_am335x_tscadc.h |  1 +
 2 files changed, 23 insertions(+), 15 deletions(-)
diff mbox series

Patch

diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c
index cfdef833dffb..29ada9da8826 100644
--- a/drivers/mfd/ti_am335x_tscadc.c
+++ b/drivers/mfd/ti_am335x_tscadc.c
@@ -105,8 +105,9 @@  static void tscadc_idle_config(struct ti_tscadc_dev *tscadc)
 {
 	unsigned int idleconfig;
 
-	idleconfig = STEPCONFIG_YNN | STEPCONFIG_INM_ADCREFM |
-			STEPCONFIG_INP_ADCREFM | STEPCONFIG_YPN;
+	idleconfig = STEPCONFIG_INM_ADCREFM | STEPCONFIG_INP_ADCREFM;
+	if (tscadc->data->has_tsc)
+		idleconfig |= STEPCONFIG_YNN | STEPCONFIG_YPN;
 
 	regmap_write(tscadc->regmap, REG_IDLECONFIG, idleconfig);
 }
@@ -140,12 +141,14 @@  static	int ti_tscadc_probe(struct platform_device *pdev)
 
 	tscadc->data = of_device_get_match_data(&pdev->dev);
 
-	node = of_get_child_by_name(pdev->dev.of_node, "tsc");
-	of_property_read_u32(node, "ti,wires", &tscmag_wires);
-	of_property_read_u32(node, "ti,coordiante-readouts", &readouts);
-	of_node_put(node);
-	if (tscmag_wires)
-		use_tsc = true;
+	if (tscadc->data->has_tsc) {
+		node = of_get_child_by_name(pdev->dev.of_node, "tsc");
+		of_property_read_u32(node, "ti,wires", &tscmag_wires);
+		of_property_read_u32(node, "ti,coordiante-readouts", &readouts);
+		of_node_put(node);
+		if (tscmag_wires)
+			use_tsc = true;
+	}
 
 	node = of_get_child_by_name(pdev->dev.of_node, "adc");
 	of_property_for_each_u32(node, "ti,adc-channels", prop, cur, val) {
@@ -223,13 +226,16 @@  static	int ti_tscadc_probe(struct platform_device *pdev)
 	regmap_write(tscadc->regmap, REG_CLKDIV, tscadc->clk_div);
 
 	/* Set the control register bits */
-	tscadc->ctrl = CNTRLREG_TSC_STEPCONFIGWRT | CNTRLREG_STEPID;
-	if (use_tsc) {
-		tscadc->ctrl |= CNTRLREG_TSC_ENB;
-		if (tscmag_wires == 5)
-			tscadc->ctrl |= CNTRLREG_TSC_5WIRE;
-		else
-			tscadc->ctrl |= CNTRLREG_TSC_4WIRE;
+	tscadc->ctrl = CNTRLREG_STEPID;
+	if (tscadc->data->has_tsc) {
+		tscadc->ctrl |= CNTRLREG_TSC_STEPCONFIGWRT;
+		if (use_tsc) {
+			tscadc->ctrl |= CNTRLREG_TSC_ENB;
+			if (tscmag_wires == 5)
+				tscadc->ctrl |= CNTRLREG_TSC_5WIRE;
+			else
+				tscadc->ctrl |= CNTRLREG_TSC_4WIRE;
+		}
 	}
 	regmap_write(tscadc->regmap, REG_CTRL, tscadc->ctrl);
 
@@ -325,6 +331,7 @@  static int __maybe_unused tscadc_resume(struct device *dev)
 static SIMPLE_DEV_PM_OPS(tscadc_pm_ops, tscadc_suspend, tscadc_resume);
 
 static const struct ti_tscadc_data tscdata = {
+	.has_tsc = true,
 	.name_tscmag = "TI-am335x-tsc",
 	.compat_tscmag = "ti,am3359-tsc",
 	.name_adc = "TI-am335x-adc",
diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h
index 29d3195b0193..3dbdb827566c 100644
--- a/include/linux/mfd/ti_am335x_tscadc.h
+++ b/include/linux/mfd/ti_am335x_tscadc.h
@@ -156,6 +156,7 @@ 
 #define TSCADC_CELLS		2
 
 struct ti_tscadc_data {
+	bool has_tsc;
 	char *name_tscmag;
 	char *compat_tscmag;
 	char *name_adc;