Message ID | 20211027181350.91630-6-nikita@trvn.ru (mailing list archive) |
---|---|
State | Superseded |
Headers | show |
Series | Add touch-keys support to the Zinitix touch driver | expand |
Hi Nikita, On Mittwoch, 27. Oktober 2021 20:13:49 CEST Nikita Travkin wrote: > In some configrations the touch controller can support the touch-keys. > Doucument the linux,keycodes property that enables those keys and > specifies the keycodes that should be used to report the key events. > > Signed-off-by: Nikita Travkin <nikita@trvn.ru> > --- > .../bindings/input/touchscreen/zinitix,bt400.yaml | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git > a/Documentation/devicetree/bindings/input/touchscreen/zinitix,bt400.yaml > b/Documentation/devicetree/bindings/input/touchscreen/zinitix,bt400.yaml > index b4e5ba7c0b49..40b243c07fd4 100644 > --- a/Documentation/devicetree/bindings/input/touchscreen/zinitix,bt400.yaml > +++ > b/Documentation/devicetree/bindings/input/touchscreen/zinitix,bt400.yaml @@ > -79,6 +79,14 @@ properties: > $ref: /schemas/types.yaml#/definitions/uint32 > enum: [1, 2] > > + linux,keycodes: > + description: | > + This property specifies an array of keycodes assigned to the > + touch-keys that can be present in some touchscreen configurations. > + $ref: /schemas/input/input.yaml#/properties/linux,keycodes > + minItems: 1 I think this would suggest all devices using the driver must have at least keycode declared which doesn't seem to be the desired behavior? Regards, Luca > + maxItems: 8 > + > touchscreen-size-x: true > touchscreen-size-y: true > touchscreen-fuzz-x: true
Hi Luca, Luca Weiss писал(а) 27.10.2021 23:33: > Hi Nikita, > > On Mittwoch, 27. Oktober 2021 20:13:49 CEST Nikita Travkin wrote: >> In some configrations the touch controller can support the touch-keys. >> Doucument the linux,keycodes property that enables those keys and >> specifies the keycodes that should be used to report the key events. >> >> Signed-off-by: Nikita Travkin <nikita@trvn.ru> >> --- >> .../bindings/input/touchscreen/zinitix,bt400.yaml | 8 >> ++++++++ >> 1 file changed, 8 insertions(+) >> >> diff --git >> a/Documentation/devicetree/bindings/input/touchscreen/zinitix,bt400.yaml >> b/Documentation/devicetree/bindings/input/touchscreen/zinitix,bt400.yaml >> index b4e5ba7c0b49..40b243c07fd4 100644 >> --- >> a/Documentation/devicetree/bindings/input/touchscreen/zinitix,bt400.yaml >> +++ >> b/Documentation/devicetree/bindings/input/touchscreen/zinitix,bt400.yaml >> @@ >> -79,6 +79,14 @@ properties: >> $ref: /schemas/types.yaml#/definitions/uint32 >> enum: [1, 2] >> >> + linux,keycodes: >> + description: | >> + This property specifies an array of keycodes assigned to the >> + touch-keys that can be present in some touchscreen >> configurations. >> + $ref: /schemas/input/input.yaml#/properties/linux,keycodes >> + minItems: 1 > > I think this would suggest all devices using the driver must have at > least > keycode declared which doesn't seem to be the desired behavior? As I haven't added the property to the "required" list I'd read this as "If the property is defined it must contain from one to eight elements" so I think that *technically* the schema is correct. (Otherwise the dt_schema_check would fail verifying the example) However this indeed may be true that I could give a better description than "can be present in some touchscreen configurations." Thanks, Nikita > Regards, > Luca > >> + maxItems: 8 >> + >> touchscreen-size-x: true >> touchscreen-size-y: true >> touchscreen-fuzz-x: true
On Wed, Oct 27, 2021 at 11:13:49PM +0500, Nikita Travkin wrote: > In some configrations the touch controller can support the touch-keys. > Doucument the linux,keycodes property that enables those keys and > specifies the keycodes that should be used to report the key events. > > Signed-off-by: Nikita Travkin <nikita@trvn.ru> > --- > .../bindings/input/touchscreen/zinitix,bt400.yaml | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/Documentation/devicetree/bindings/input/touchscreen/zinitix,bt400.yaml b/Documentation/devicetree/bindings/input/touchscreen/zinitix,bt400.yaml > index b4e5ba7c0b49..40b243c07fd4 100644 > --- a/Documentation/devicetree/bindings/input/touchscreen/zinitix,bt400.yaml > +++ b/Documentation/devicetree/bindings/input/touchscreen/zinitix,bt400.yaml > @@ -79,6 +79,14 @@ properties: > $ref: /schemas/types.yaml#/definitions/uint32 > enum: [1, 2] > > + linux,keycodes: > + description: | > + This property specifies an array of keycodes assigned to the > + touch-keys that can be present in some touchscreen configurations. > + $ref: /schemas/input/input.yaml#/properties/linux,keycodes Instead, reference input.yaml at the top-level. > + minItems: 1 > + maxItems: 8 > + > touchscreen-size-x: true > touchscreen-size-y: true > touchscreen-fuzz-x: true > -- > 2.30.2 > >
diff --git a/Documentation/devicetree/bindings/input/touchscreen/zinitix,bt400.yaml b/Documentation/devicetree/bindings/input/touchscreen/zinitix,bt400.yaml index b4e5ba7c0b49..40b243c07fd4 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/zinitix,bt400.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/zinitix,bt400.yaml @@ -79,6 +79,14 @@ properties: $ref: /schemas/types.yaml#/definitions/uint32 enum: [1, 2] + linux,keycodes: + description: | + This property specifies an array of keycodes assigned to the + touch-keys that can be present in some touchscreen configurations. + $ref: /schemas/input/input.yaml#/properties/linux,keycodes + minItems: 1 + maxItems: 8 + touchscreen-size-x: true touchscreen-size-y: true touchscreen-fuzz-x: true
In some configrations the touch controller can support the touch-keys. Doucument the linux,keycodes property that enables those keys and specifies the keycodes that should be used to report the key events. Signed-off-by: Nikita Travkin <nikita@trvn.ru> --- .../bindings/input/touchscreen/zinitix,bt400.yaml | 8 ++++++++ 1 file changed, 8 insertions(+)