diff mbox series

[v16,3/3] ARM: dts: imx7d: remarkable2: add wacom digitizer device

Message ID 20211208124045.61815-4-alistair@alistair23.me (mailing list archive)
State Mainlined
Commit 538e5f7106f61e6b8404b0509f71f518123968cd
Headers show
Series Add Wacom I2C support to rM2 | expand

Commit Message

Alistair Francis Dec. 8, 2021, 12:40 p.m. UTC 
Add Wacom I2C support for the reMarkable 2 eInk tablet using the
generic I2C HID framework.

Signed-off-by: Alistair Francis <alistair@alistair23.me>
---
 arch/arm/boot/dts/imx7d-remarkable2.dts | 59 +++++++++++++++++++++++++
 1 file changed, 59 insertions(+)

Comments

Shawn Guo Dec. 16, 2021, 3:08 a.m. UTC | #1 
On Wed, Dec 08, 2021 at 10:40:45PM +1000, Alistair Francis wrote:
> Add Wacom I2C support for the reMarkable 2 eInk tablet using the
> generic I2C HID framework.
> 
> Signed-off-by: Alistair Francis <alistair@alistair23.me>

I updated the subject prefix like below.

 ARM: dts: imx7d-remarkable2:

Applied, thanks!
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/imx7d-remarkable2.dts b/arch/arm/boot/dts/imx7d-remarkable2.dts
index 89cbf13097a4..a2a91bfdd98e 100644
--- a/arch/arm/boot/dts/imx7d-remarkable2.dts
+++ b/arch/arm/boot/dts/imx7d-remarkable2.dts
@@ -34,6 +34,19 @@  reg_brcm: regulator-brcm {
 		startup-delay-us = <150>;
 	};
 
+	reg_digitizer: regulator-digitizer {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3_DIGITIZER";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&pinctrl_digitizer_reg>;
+		pinctrl-1 = <&pinctrl_digitizer_reg>;
+		gpio = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100000>; /* 100 ms */
+	};
+
 	wifi_pwrseq: wifi_pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		pinctrl-names = "default";
@@ -51,6 +64,26 @@  &clks {
 	assigned-clock-rates = <0>, <32768>;
 };
 
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	wacom_digitizer: digitizer@9 {
+		compatible = "hid-over-i2c";
+		reg = <0x09>;
+		hid-descr-addr = <0x01>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wacom>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+		touchscreen-inverted-x;
+		touchscreen-inverted-y;
+		vdd-supply = <&reg_digitizer>;
+	};
+};
+
 &snvs_pwrkey {
 	status = "okay";
 };
@@ -117,6 +150,25 @@  &wdog1 {
 	fsl,ext-reset-output;
 };
 
+&iomuxc_lpsr {
+	pinctrl_digitizer_reg: digitizerreggrp {
+		fsl,pins = <
+			/* DIGITIZER_PWR_EN */
+			MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6	0x14
+		>;
+	};
+
+	pinctrl_wacom: wacomgrp {
+		fsl,pins = <
+			/*MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5	0x00000014 FWE */
+			MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4	0x00000074 /* PDCTB */
+			MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1	0x00000034 /* WACOM INT */
+			/*MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6	0x00000014 WACOM PWR ENABLE */
+			/*MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0	0x00000074 WACOM RESET */
+		>;
+	};
+};
+
 &iomuxc {
 	pinctrl_brcm_reg: brcmreggrp {
 		fsl,pins = <
@@ -125,6 +177,13 @@  MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13	0x14
 		>;
 	};
 
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX7D_PAD_I2C1_SDA__I2C1_SDA		0x4000007f
+			MX7D_PAD_I2C1_SCL__I2C1_SCL		0x4000007f
+		>;
+	};
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
 			MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x79