diff mbox series

[RFC,01/32] Kconfig: introduce and depend on LEGACY_PCI

Message ID 20211227164317.4146918-2-schnelle@linux.ibm.com (mailing list archive)
State New, archived
Headers show
Series [RFC,01/32] Kconfig: introduce and depend on LEGACY_PCI | expand

Commit Message

Niklas Schnelle Dec. 27, 2021, 4:42 p.m. UTC
Introduce a new LEGACY_PCI Kconfig option which gates support for legacy
PCI devices including those attached to a PCI-to-PCI Express bridge and
PCI Express devices using legacy I/O spaces. Note that this is different
from non PCI uses of I/O ports such as by ACPI.

Add dependencies on LEGACY_PCI for all PCI drivers which only target
legacy PCI devices and ifdef legacy PCI specific functions in ata
handling.

Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
---
 drivers/ata/Kconfig                          | 34 ++++++++--------
 drivers/ata/ata_generic.c                    |  3 +-
 drivers/ata/libata-sff.c                     |  2 +
 drivers/comedi/Kconfig                       | 42 +++++++++++++++++++
 drivers/gpio/Kconfig                         |  2 +-
 drivers/hwmon/Kconfig                        |  6 +--
 drivers/i2c/busses/Kconfig                   | 24 +++++------
 drivers/input/gameport/Kconfig               |  4 +-
 drivers/isdn/hardware/mISDN/Kconfig          | 14 +++----
 drivers/media/cec/platform/Kconfig           |  2 +-
 drivers/media/pci/dm1105/Kconfig             |  2 +-
 drivers/media/radio/Kconfig                  |  2 +-
 drivers/message/fusion/Kconfig               |  8 ++--
 drivers/net/arcnet/Kconfig                   |  2 +-
 drivers/net/ethernet/8390/Kconfig            |  2 +-
 drivers/net/ethernet/amd/Kconfig             |  2 +-
 drivers/net/ethernet/intel/Kconfig           |  4 +-
 drivers/net/ethernet/sis/Kconfig             |  6 +--
 drivers/net/ethernet/ti/Kconfig              |  4 +-
 drivers/net/ethernet/via/Kconfig             |  4 +-
 drivers/net/fddi/Kconfig                     |  4 +-
 drivers/net/wan/Kconfig                      |  2 +-
 drivers/net/wireless/atmel/Kconfig           |  4 +-
 drivers/net/wireless/intersil/hostap/Kconfig |  4 +-
 drivers/pci/Kconfig                          | 11 +++++
 drivers/scsi/Kconfig                         | 20 ++++-----
 drivers/scsi/aic7xxx/Kconfig.aic79xx         |  2 +-
 drivers/scsi/aic7xxx/Kconfig.aic7xxx         |  2 +-
 drivers/scsi/aic94xx/Kconfig                 |  2 +-
 drivers/scsi/megaraid/Kconfig.megaraid       |  2 +-
 drivers/scsi/mvsas/Kconfig                   |  2 +-
 drivers/scsi/qla2xxx/Kconfig                 |  2 +-
 drivers/spi/Kconfig                          |  1 +
 drivers/staging/sm750fb/Kconfig              |  2 +-
 drivers/staging/vt6655/Kconfig               |  2 +-
 drivers/tty/Kconfig                          |  2 +-
 drivers/tty/serial/Kconfig                   |  2 +-
 drivers/video/fbdev/Kconfig                  | 22 +++++-----
 drivers/watchdog/Kconfig                     |  4 +-
 sound/pci/Kconfig                            | 43 ++++++++++++++++----
 40 files changed, 194 insertions(+), 110 deletions(-)

Comments

Guenter Roeck Dec. 27, 2021, 5:48 p.m. UTC | #1
On 12/27/21 8:42 AM, Niklas Schnelle wrote:
> Introduce a new LEGACY_PCI Kconfig option which gates support for legacy
> PCI devices including those attached to a PCI-to-PCI Express bridge and
> PCI Express devices using legacy I/O spaces. Note that this is different
> from non PCI uses of I/O ports such as by ACPI.
> 
> Add dependencies on LEGACY_PCI for all PCI drivers which only target
> legacy PCI devices and ifdef legacy PCI specific functions in ata
> handling.
> 

This effectively disables all default configurations which now depend
on CONFIG_LEGACY_PCI. Yet, I don't see CONFIG_LEGACY_PCI added to
configuration files which explicitly enable any of the affected
configurations. Is that on purpose ? If so, I think it should at least
be mentioned in the commit description. However, I think it would be
more appropriate to either delete all affected configuration flags from
the affected configuration files, or to add CONFIG_LEGACY_PCI=y to those
files.

Guenter
Mauro Carvalho Chehab Dec. 28, 2021, 2:09 a.m. UTC | #2
Em Mon, 27 Dec 2021 17:42:46 +0100
Niklas Schnelle <schnelle@linux.ibm.com> escreveu:

> Introduce a new LEGACY_PCI Kconfig option which gates support for legacy
> PCI devices including those attached to a PCI-to-PCI Express bridge and
> PCI Express devices using legacy I/O spaces. Note that this is different
> from non PCI uses of I/O ports such as by ACPI.
> 
> Add dependencies on LEGACY_PCI for all PCI drivers which only target
> legacy PCI devices and ifdef legacy PCI specific functions in ata
> handling.
> 
> Co-developed-by: Arnd Bergmann <arnd@kernel.org>
> Signed-off-by: Arnd Bergmann <arnd@kernel.org>
> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
> ---
>  drivers/ata/Kconfig                          | 34 ++++++++--------
>  drivers/ata/ata_generic.c                    |  3 +-
>  drivers/ata/libata-sff.c                     |  2 +
>  drivers/comedi/Kconfig                       | 42 +++++++++++++++++++
>  drivers/gpio/Kconfig                         |  2 +-
>  drivers/hwmon/Kconfig                        |  6 +--
>  drivers/i2c/busses/Kconfig                   | 24 +++++------
>  drivers/input/gameport/Kconfig               |  4 +-
>  drivers/isdn/hardware/mISDN/Kconfig          | 14 +++----

>  drivers/media/cec/platform/Kconfig           |  2 +-
>  drivers/media/pci/dm1105/Kconfig             |  2 +-
>  drivers/media/radio/Kconfig                  |  2 +-

Not sure what you meant by "legacy I/O spaces" on this patch. 
I mean, I would expect non-PCIe devices - like bttv and other
devices developed at the past millennium or so to be "legacy",
but at least on media, it is touching some drivers that aren't
that old, while keeping the really old ones untouched. Instead,
it is touching a driver developed in 2017 plus two other ones
that are a way newer than other drivers.

The support for the Bt8xx chipset, in particular, is really 
weird, as a sound driver for such chipset:

> @@ -172,6 +177,7 @@ config SND_AZT3328
>  
>  config SND_BT87X
>  	tristate "Bt87x Audio Capture"
> +	depends on LEGACY_PCI
>  	select SND_PCM
>  	help
>  	  If you want to record audio from TV cards based on

was marked as dependent of LEGACY_PCI, while the DVB and V4L2 ones 
weren't.

Sounds confusing to me, as the PCI bridge used by a Bt87x device 
should be the same for all three subdevices.

I'm confused...

Regards,
Mauro
Greg KH Dec. 28, 2021, 8:21 a.m. UTC | #3
On Mon, Dec 27, 2021 at 05:42:46PM +0100, Niklas Schnelle wrote:
> --- a/drivers/pci/Kconfig
> +++ b/drivers/pci/Kconfig
> @@ -23,6 +23,17 @@ menuconfig PCI
>  
>  if PCI
>  
> +config LEGACY_PCI
> +	bool "Enable support for legacy PCI devices"
> +	depends on HAVE_PCI
> +	help
> +	   This option enables support for legacy PCI devices. This includes
> +	   PCI devices attached directly or via a bridge on a PCI Express bus.
> +	   It also includes compatibility features on PCI Express devices which
> +	   make use of legacy I/O spaces.

All you really care about is the "legacy" I/O spaces here, this isn't
tied to PCI specifically at all, right?

So why not just have a OLD_STYLE_IO config option or something like
that, to show that it's the i/o functions we care about here, not PCI at
all?

And maybe not call it "old" or "legacy" as time constantly goes forward,
just describe it as it is, "DIRECT_IO"?

thanks,

greg k-h
Mauro Carvalho Chehab Dec. 28, 2021, 9:15 a.m. UTC | #4
Em Tue, 28 Dec 2021 09:21:23 +0100
Greg Kroah-Hartman <gregkh@linuxfoundation.org> escreveu:

> On Mon, Dec 27, 2021 at 05:42:46PM +0100, Niklas Schnelle wrote:
> > --- a/drivers/pci/Kconfig
> > +++ b/drivers/pci/Kconfig
> > @@ -23,6 +23,17 @@ menuconfig PCI
> >  
> >  if PCI
> >  
> > +config LEGACY_PCI
> > +	bool "Enable support for legacy PCI devices"
> > +	depends on HAVE_PCI
> > +	help
> > +	   This option enables support for legacy PCI devices. This includes
> > +	   PCI devices attached directly or via a bridge on a PCI Express bus.
> > +	   It also includes compatibility features on PCI Express devices which
> > +	   make use of legacy I/O spaces.  

This Kconfig doesn't seem what it is needed there, as this should be an 
arch-dependent feature, and not something that the poor user should be
aware if a given architecture supports it or not. Also, the above will keep
causing warnings or errors with randconfigs.

Also, the "depends on HAVE_CPI" is bogus, as PCI already depends on 
HAVE_PCI:

	menuconfig PCI
	bool "PCI support"
	depends on HAVE_PCI
	help
	  This option enables support for the PCI local bus, including
	  support for PCI-X and the foundations for PCI Express support.
	  Say 'Y' here unless you know what you are doing.

So, instead, I would expect that a new HAVE_xxx option would be
added at arch/*/Kconfig, like:

	config X86
		...
		select HAVE_PCI_DIRECT_IO

It would also make sense to document it at Documentation/features/.

> 
> All you really care about is the "legacy" I/O spaces here, this isn't
> tied to PCI specifically at all, right?
> 
> So why not just have a OLD_STYLE_IO config option or something like
> that, to show that it's the i/o functions we care about here, not PCI at
> all?
> 
> And maybe not call it "old" or "legacy" as time constantly goes forward,
> just describe it as it is, "DIRECT_IO"?

Agreed. HAVE_PCI_DIRECT_IO (or something similar) seems a more appropriate
name for it.

Thanks,
Mauro
Niklas Schnelle Dec. 28, 2021, 10:58 a.m. UTC | #5
On Tue, 2021-12-28 at 10:15 +0100, Mauro Carvalho Chehab wrote:
> Em Tue, 28 Dec 2021 09:21:23 +0100
> Greg Kroah-Hartman <gregkh@linuxfoundation.org> escreveu:
> 
> > On Mon, Dec 27, 2021 at 05:42:46PM +0100, Niklas Schnelle wrote:
> > > --- a/drivers/pci/Kconfig
> > > +++ b/drivers/pci/Kconfig
> > > @@ -23,6 +23,17 @@ menuconfig PCI
> > >  
> > >  if PCI
> > >  
> > > +config LEGACY_PCI
> > > +	bool "Enable support for legacy PCI devices"
> > > +	depends on HAVE_PCI
> > > +	help
> > > +	   This option enables support for legacy PCI devices. This includes
> > > +	   PCI devices attached directly or via a bridge on a PCI Express bus.
> > > +	   It also includes compatibility features on PCI Express devices which
> > > +	   make use of legacy I/O spaces.  
> 
> This Kconfig doesn't seem what it is needed there, as this should be an 
> arch-dependent feature, and not something that the poor user should be
> aware if a given architecture supports it or not. Also, the above will keep
> causing warnings or errors with randconfigs.
> 
> Also, the "depends on HAVE_CPI" is bogus, as PCI already depends on 
> HAVE_PCI:

Ah yes you're right.

> 
> 	menuconfig PCI
> 	bool "PCI support"
> 	depends on HAVE_PCI
> 	help
> 	  This option enables support for the PCI local bus, including
> 	  support for PCI-X and the foundations for PCI Express support.
> 	  Say 'Y' here unless you know what you are doing.
> 
> So, instead, I would expect that a new HAVE_xxx option would be
> added at arch/*/Kconfig, like:
> 
> 	config X86
> 		...
> 		select HAVE_PCI_DIRECT_IO
> 
> It would also make sense to document it at Documentation/features/.

I'll look into that, thanks.

> 
> > All you really care about is the "legacy" I/O spaces here, this isn't
> > tied to PCI specifically at all, right?
> > 
> > So why not just have a OLD_STYLE_IO config option or something like
> > that, to show that it's the i/o functions we care about here, not PCI at
> > all?
> > 
> > And maybe not call it "old" or "legacy" as time constantly goes forward,
> > just describe it as it is, "DIRECT_IO"?
> 
> Agreed. HAVE_PCI_DIRECT_IO (or something similar) seems a more appropriate
> name for it.
> 
> Thanks,
> Mauro

Hmm, I might be missing something here but that sounds a lot like the
HAS_IOPORT option added in patch 02.

We add both LEGACY_PCI and HAS_IOPORT to differentiate between two
cases. HAS_IOPORT is for PC-style devices that are not on a PCI card
while LEGACY_PCI is for PCI drivers that require port I/O. This
includes pre-PCIe devices as well as PCIe devices which require
features like I/O spaces. The "legacy" naming is comes from the PCIe
spec which in section 2.1.1.2 says "PCI Express supports I/O Space for
compatibility with legacy devices which require their use. Future
revisions of this specification may deprecate the use of I/O Space."

These two separate config options allow us to compile without support
for these legacy PCI devices even on a system where inb()/outb() and
friends are required for some PC style devices and for example ACPI.
Greg KH Dec. 28, 2021, 12:01 p.m. UTC | #6
On Tue, Dec 28, 2021 at 11:58:55AM +0100, Niklas Schnelle wrote:
> We add both LEGACY_PCI and HAS_IOPORT to differentiate between two
> cases. HAS_IOPORT is for PC-style devices that are not on a PCI card
> while LEGACY_PCI is for PCI drivers that require port I/O. This
> includes pre-PCIe devices as well as PCIe devices which require
> features like I/O spaces. The "legacy" naming is comes from the PCIe
> spec which in section 2.1.1.2 says "PCI Express supports I/O Space for
> compatibility with legacy devices which require their use. Future
> revisions of this specification may deprecate the use of I/O Space."

Ah, then mention the reason why this is called LEGACY_PCI is that it is
because that is what the PCI spec calls it.  It was not obvious here at
all that this is where the name came from.

thanks,

greg k-h
Mauro Carvalho Chehab Dec. 28, 2021, 12:54 p.m. UTC | #7
Em Tue, 28 Dec 2021 11:58:55 +0100
Niklas Schnelle <schnelle@linux.ibm.com> escreveu:

> On Tue, 2021-12-28 at 10:15 +0100, Mauro Carvalho Chehab wrote:
> > Em Tue, 28 Dec 2021 09:21:23 +0100
> > Greg Kroah-Hartman <gregkh@linuxfoundation.org> escreveu:
> >   
> > > On Mon, Dec 27, 2021 at 05:42:46PM +0100, Niklas Schnelle wrote:  
> > > > --- a/drivers/pci/Kconfig
> > > > +++ b/drivers/pci/Kconfig
> > > > @@ -23,6 +23,17 @@ menuconfig PCI
> > > >  
> > > >  if PCI
> > > >  
> > > > +config LEGACY_PCI
> > > > +	bool "Enable support for legacy PCI devices"
> > > > +	depends on HAVE_PCI
> > > > +	help
> > > > +	   This option enables support for legacy PCI devices. This includes
> > > > +	   PCI devices attached directly or via a bridge on a PCI Express bus.
> > > > +	   It also includes compatibility features on PCI Express devices which
> > > > +	   make use of legacy I/O spaces.    
> > 
> > This Kconfig doesn't seem what it is needed there, as this should be an 
> > arch-dependent feature, and not something that the poor user should be
> > aware if a given architecture supports it or not. Also, the above will keep
> > causing warnings or errors with randconfigs.
> > 
> > Also, the "depends on HAVE_CPI" is bogus, as PCI already depends on 
> > HAVE_PCI:  
> 
> Ah yes you're right.
> 
> > 
> > 	menuconfig PCI
> > 	bool "PCI support"
> > 	depends on HAVE_PCI
> > 	help
> > 	  This option enables support for the PCI local bus, including
> > 	  support for PCI-X and the foundations for PCI Express support.
> > 	  Say 'Y' here unless you know what you are doing.
> > 
> > So, instead, I would expect that a new HAVE_xxx option would be
> > added at arch/*/Kconfig, like:
> > 
> > 	config X86
> > 		...
> > 		select HAVE_PCI_DIRECT_IO
> > 
> > It would also make sense to document it at Documentation/features/.  
> 
> I'll look into that, thanks.
> 
> >   
> > > All you really care about is the "legacy" I/O spaces here, this isn't
> > > tied to PCI specifically at all, right?
> > > 
> > > So why not just have a OLD_STYLE_IO config option or something like
> > > that, to show that it's the i/o functions we care about here, not PCI at
> > > all?
> > > 
> > > And maybe not call it "old" or "legacy" as time constantly goes forward,
> > > just describe it as it is, "DIRECT_IO"?  
> > 
> > Agreed. HAVE_PCI_DIRECT_IO (or something similar) seems a more appropriate
> > name for it.
> > 
> > Thanks,
> > Mauro  
> 
> Hmm, I might be missing something here but that sounds a lot like the
> HAS_IOPORT option added in patch 02.
> 
> We add both LEGACY_PCI and HAS_IOPORT to differentiate between two
> cases. HAS_IOPORT is for PC-style devices that are not on a PCI card
> while LEGACY_PCI is for PCI drivers that require port I/O. 

I didn't look at the other patches on this series, but why it is needed
to deal with them on a separate way? Won't "PCI" and "HAS_IOPORT" be enough? 

I mean, are there any architecture where HAVE_PCI=y and HAS_IOPORT=y
where LEGACY_PCI shall be "n"?

> This
> includes pre-PCIe devices as well as PCIe devices which require
> features like I/O spaces. The "legacy" naming is comes from the PCIe
> spec which in section 2.1.1.2 says "PCI Express supports I/O Space for
> compatibility with legacy devices which require their use. Future
> revisions of this specification may deprecate the use of I/O Space."

I would still avoid calling it LEGACY_PCI, as this sounds too generic.

I didn't read the PCI/PCIe specs, but I suspect that are a lot more
features that were/will be deprecated on PCI specs as time goes by.

So, I would, instead, use something like PCI_LEGACY_IO_SPACE or 
HAVE_PCI_LEGACY_IO_SPACE, in order to let it clear what "legacy"
means.

> These two separate config options allow us to compile without support
> for these legacy PCI devices even on a system where inb()/outb() and
> friends are required for some PC style devices and for example ACPI.

Hmm... why this patch make SND_BT87X dependent on LEGACY_PCI?

> @@ -172,6 +177,7 @@ config SND_AZT3328
>  
>  config SND_BT87X
>  	tristate "Bt87x Audio Capture"
> +	depends on LEGACY_PCI
>  	select SND_PCM
>  	help
>  	  If you want to record audio from TV cards based on

I couldn't find any usage of inb/outb & friends on it:

	$ grep -E '(inb|outb|inw|outw|inl|outl)\b' ./sound/pci/bt87x.c

It uses, instead, readl/writel:

	static inline u32 snd_bt87x_readl(struct snd_bt87x *chip, u32 reg)
	{
	        return readl(chip->mmio + reg);
	}

	static inline void snd_bt87x_writel(struct snd_bt87x *chip, u32 reg, u32 value)
	{
	        writel(value, chip->mmio + reg);
	}

I failed to see what makes it different from VIDEO_BT848 and
DVB_BT8XX drivers. They all support exactly the same chipset:
Brooktree/Conexant BT8xx. On those devices, depending on the exact
model, up to three separate interfaces are provided, each one with
its own Kconfig var:

	- audio I/O (SND_BT87X);
	- video I/O (VIDEO_BT848);
	- MPEG-TS I/O (DVB_BT8XX).

Thanks,
Mauro
Niklas Schnelle Dec. 28, 2021, 3:06 p.m. UTC | #8
On Tue, 2021-12-28 at 13:54 +0100, Mauro Carvalho Chehab wrote:
>
---8<---
>   
> > > > All you really care about is the "legacy" I/O spaces here, this isn't
> > > > tied to PCI specifically at all, right?
> > > > 
> > > > So why not just have a OLD_STYLE_IO config option or something like
> > > > that, to show that it's the i/o functions we care about here, not PCI at
> > > > all?
> > > > 
> > > > And maybe not call it "old" or "legacy" as time constantly goes forward,
> > > > just describe it as it is, "DIRECT_IO"?  
> > > 
> > > Agreed. HAVE_PCI_DIRECT_IO (or something similar) seems a more appropriate
> > > name for it.
> > > 
> > > Thanks,
> > > Mauro  
> > 
> > Hmm, I might be missing something here but that sounds a lot like the
> > HAS_IOPORT option added in patch 02.
> > 
> > We add both LEGACY_PCI and HAS_IOPORT to differentiate between two
> > cases. HAS_IOPORT is for PC-style devices that are not on a PCI card
> > while LEGACY_PCI is for PCI drivers that require port I/O. 
> 
> I didn't look at the other patches on this series, but why it is needed
> to deal with them on a separate way? Won't "PCI" and "HAS_IOPORT" be enough? 
> 
> I mean, are there any architecture where HAVE_PCI=y and HAS_IOPORT=y
> where LEGACY_PCI shall be "n"?

In the current patch set LEGACY_PCI is not currently selected by
architectures, though of course it could be if we know that an
architecture requires it. We should probably also set it in any
defconfig that has devices depending on it so as not to break these.

Other than that it would be set during kernel configuration if one
wants/needs support for legacy PCI devices. For testing I ran with
HAVE_PCI=y, HAS_IOPORT=y and LEGACY_PCI=n on both my local Ryzen 3990X
based workstation and Raspberry Pi 4 (DT). I guess at the moment it
would make most sense for special configs such as those tailored for
vitualization guets but in the end that would be something for
distributions to decide.

Arnd described the options here:
https://lore.kernel.org/lkml/CAK8P3a3HHeP+Gw_k2P7Qtig0OmErf0HN30G22+qHic_uZTh11Q@mail.gmail.com/

> 
> > This
> > includes pre-PCIe devices as well as PCIe devices which require
> > features like I/O spaces. The "legacy" naming is comes from the PCIe
> > spec which in section 2.1.1.2 says "PCI Express supports I/O Space for
> > compatibility with legacy devices which require their use. Future
> > revisions of this specification may deprecate the use of I/O Space."
> 
> I would still avoid calling it LEGACY_PCI, as this sounds too generic.
> 
> I didn't read the PCI/PCIe specs, but I suspect that are a lot more
> features that were/will be deprecated on PCI specs as time goes by.
> 
> So, I would, instead, use something like PCI_LEGACY_IO_SPACE or 
> HAVE_PCI_LEGACY_IO_SPACE, in order to let it clear what "legacy"
> means.

Hmm, I'd like to hear Bjorn's opinion on this. Personally I feel like
LEGACY_PCI is pretty clear since most devices are either pre-PCIe
devices or a compatibility feature allowing drivers for a pre-PCIe
device to work with a PCIe device.

> 
> > These two separate config options allow us to compile without support
> > for these legacy PCI devices even on a system where inb()/outb() and
> > friends are required for some PC style devices and for example ACPI.
> 
> Hmm... why this patch make SND_BT87X dependent on LEGACY_PCI?
> 
> > @@ -172,6 +177,7 @@ config SND_AZT3328
> >  
> >  config SND_BT87X
> >  	tristate "Bt87x Audio Capture"
> > +	depends on LEGACY_PCI
> >  	select SND_PCM
> >  	help
> >  	  If you want to record audio from TV cards based on
> 
> I couldn't find any usage of inb/outb & friends on it:
> 
> 	$ grep -E '(inb|outb|inw|outw|inl|outl)\b' ./sound/pci/bt87x.c
> 
> It uses, instead, readl/writel:
> 
> 	static inline u32 snd_bt87x_readl(struct snd_bt87x *chip, u32 reg)
> 	{
> 	        return readl(chip->mmio + reg);
> 	}
> 
> 	static inline void snd_bt87x_writel(struct snd_bt87x *chip, u32 reg, u32 value)
> 	{
> 	        writel(value, chip->mmio + reg);
> 	}
> 
> I failed to see what makes it different from VIDEO_BT848 and
> DVB_BT8XX drivers. They all support exactly the same chipset:
> Brooktree/Conexant BT8xx. On those devices, depending on the exact
> model, up to three separate interfaces are provided, each one with
> its own Kconfig var:
> 
> 	- audio I/O (SND_BT87X);
> 	- video I/O (VIDEO_BT848);
> 	- MPEG-TS I/O (DVB_BT8XX).
> 
> Thanks,
> Mauro

You're right, that makes no sense this doesn't seem to require
LEGACY_PCI. Maybe this was added by Arnd because it lacks a "depends on
PCI" which could have caused issues with HAVE_PCI=n rand configs.
Mauro Carvalho Chehab Dec. 28, 2021, 5:12 p.m. UTC | #9
Em Tue, 28 Dec 2021 16:06:44 +0100
Niklas Schnelle <schnelle@linux.ibm.com> escreveu:

(on a side note: the c/c list of this patch is too long. I would try to
avoid using a too long list, as otherwise this e-mail may end being rejected
by mail servers)

> On Tue, 2021-12-28 at 13:54 +0100, Mauro Carvalho Chehab wrote:
> >  
> ---8<---
> >     
> > > > > All you really care about is the "legacy" I/O spaces here, this isn't
> > > > > tied to PCI specifically at all, right?
> > > > > 
> > > > > So why not just have a OLD_STYLE_IO config option or something like
> > > > > that, to show that it's the i/o functions we care about here, not PCI at
> > > > > all?
> > > > > 
> > > > > And maybe not call it "old" or "legacy" as time constantly goes forward,
> > > > > just describe it as it is, "DIRECT_IO"?    
> > > > 
> > > > Agreed. HAVE_PCI_DIRECT_IO (or something similar) seems a more appropriate
> > > > name for it.
> > > > 
> > > > Thanks,
> > > > Mauro    
> > > 
> > > Hmm, I might be missing something here but that sounds a lot like the
> > > HAS_IOPORT option added in patch 02.
> > > 
> > > We add both LEGACY_PCI and HAS_IOPORT to differentiate between two
> > > cases. HAS_IOPORT is for PC-style devices that are not on a PCI card
> > > while LEGACY_PCI is for PCI drivers that require port I/O.   
> > 
> > I didn't look at the other patches on this series, but why it is needed
> > to deal with them on a separate way? Won't "PCI" and "HAS_IOPORT" be enough? 
> > 
> > I mean, are there any architecture where HAVE_PCI=y and HAS_IOPORT=y
> > where LEGACY_PCI shall be "n"?  
> 
> In the current patch set LEGACY_PCI is not currently selected by
> architectures, though of course it could be if we know that an
> architecture requires it. We should probably also set it in any
> defconfig that has devices depending on it so as not to break these.
> 
> Other than that it would be set during kernel configuration if one
> wants/needs support for legacy PCI devices. For testing I ran with
> HAVE_PCI=y, HAS_IOPORT=y and LEGACY_PCI=n on both my local Ryzen 3990X
> based workstation and Raspberry Pi 4 (DT). I guess at the moment it
> would make most sense for special configs such as those tailored for
> vitualization guets but in the end that would be something for
> distributions to decide.

IMO, it makes sense to have a "default y" there, as on systems that
support I/O space, disabling it will just randomly disable some drivers
that could be required by some hardware. I won't doubt that some of 
those could be ported from using inb/outb to use, instead, readb/writeb.

> 
> Arnd described the options here:
> https://lore.kernel.org/lkml/CAK8P3a3HHeP+Gw_k2P7Qtig0OmErf0HN30G22+qHic_uZTh11Q@mail.gmail.com/

Based on Arnd's description, LEGACY_PCI should depend on HAS_IOPORT.
This is missing on patch 1. You should probably reorder your patch
series to first create HAS_IOPORT and then add LEGACY_PCI with
depends on, as otherwise it may cause randconfig build issues
at robots and/or git bisect.

I would also suggest to first introduce such change and then send
a per-subsystem LEGACY_PCI patch, as it would be a lot easier for
maintainers to review.

> 
> >   
> > > This
> > > includes pre-PCIe devices as well as PCIe devices which require
> > > features like I/O spaces. The "legacy" naming is comes from the PCIe
> > > spec which in section 2.1.1.2 says "PCI Express supports I/O Space for
> > > compatibility with legacy devices which require their use. Future
> > > revisions of this specification may deprecate the use of I/O Space."  
> > 
> > I would still avoid calling it LEGACY_PCI, as this sounds too generic.
> > 
> > I didn't read the PCI/PCIe specs, but I suspect that are a lot more
> > features that were/will be deprecated on PCI specs as time goes by.
> > 
> > So, I would, instead, use something like PCI_LEGACY_IO_SPACE or 
> > HAVE_PCI_LEGACY_IO_SPACE, in order to let it clear what "legacy"
> > means.  
> 
> Hmm, I'd like to hear Bjorn's opinion on this. Personally I feel like
> LEGACY_PCI is pretty clear since most devices are either pre-PCIe
> devices or a compatibility feature allowing drivers for a pre-PCIe
> device to work with a PCIe device.

That's the main point: it is *not* disabling pre-PCIe devices or
even legacy PCI drivers. It just disables a random set of drivers just
because they use inb/outb instead of readb/writeb. It keeps several pure 
PCI drivers selected, and disables some PCIe for no real reason.

Just to give one example, this symbol:

> diff --git a/drivers/media/cec/platform/Kconfig b/drivers/media/cec/platform/Kconfig
> index b672d3142eb7..5e92ece5b104 100644
> --- a/drivers/media/cec/platform/Kconfig
> +++ b/drivers/media/cec/platform/Kconfig
> @@ -100,7 +100,7 @@ config CEC_TEGRA
>  config CEC_SECO
>  	tristate "SECO Boards HDMI CEC driver"
>  	depends on (X86 || IA64) || COMPILE_TEST
> -	depends on PCI && DMI
> +	depends on LEGACY_PCI && DMI
>  	select CEC_CORE
>  	select CEC_NOTIFIER
>  	help

Disables HDMI CEC support on some Intel motherboards.
Any distro meant to run on generic hardware should keep it selected.

I can see some value of a "PCI_LEGACY" option to disable all
non-PCIe drivers, but this is not the case here.

Thanks,
Mauro
Niklas Schnelle Dec. 29, 2021, 11:45 a.m. UTC | #10
On Tue, 2021-12-28 at 18:12 +0100, Mauro Carvalho Chehab wrote:
> Em Tue, 28 Dec 2021 16:06:44 +0100
> Niklas Schnelle <schnelle@linux.ibm.com> escreveu:
> 
> (on a side note: the c/c list of this patch is too long. I would try to
> avoid using a too long list, as otherwise this e-mail may end being rejected
> by mail servers)
> 
> > On Tue, 2021-12-28 at 13:54 +0100, Mauro Carvalho Chehab wrote:
> > >  
> > ---8<---
> > >     
> > > > > > All you really care about is the "legacy" I/O spaces here, this isn't
> > > > > > tied to PCI specifically at all, right?
> > > > > > 
> > > > > > So why not just have a OLD_STYLE_IO config option or something like
> > > > > > that, to show that it's the i/o functions we care about here, not PCI at
> > > > > > all?
> > > > > > 
> > > > > > And maybe not call it "old" or "legacy" as time constantly goes forward,
> > > > > > just describe it as it is, "DIRECT_IO"?    
> > > > > 
> > > > > Agreed. HAVE_PCI_DIRECT_IO (or something similar) seems a more appropriate
> > > > > name for it.
> > > > > 
> > > > > Thanks,
> > > > > Mauro    
> > > > 
> > > > Hmm, I might be missing something here but that sounds a lot like the
> > > > HAS_IOPORT option added in patch 02.
> > > > 
> > > > We add both LEGACY_PCI and HAS_IOPORT to differentiate between two
> > > > cases. HAS_IOPORT is for PC-style devices that are not on a PCI card
> > > > while LEGACY_PCI is for PCI drivers that require port I/O.   
> > > 
> > > I didn't look at the other patches on this series, but why it is needed
> > > to deal with them on a separate way? Won't "PCI" and "HAS_IOPORT" be enough? 
> > > 
> > > I mean, are there any architecture where HAVE_PCI=y and HAS_IOPORT=y
> > > where LEGACY_PCI shall be "n"?  
> > 
> > In the current patch set LEGACY_PCI is not currently selected by
> > architectures, though of course it could be if we know that an
> > architecture requires it. We should probably also set it in any
> > defconfig that has devices depending on it so as not to break these.
> > 
> > Other than that it would be set during kernel configuration if one
> > wants/needs support for legacy PCI devices. For testing I ran with
> > HAVE_PCI=y, HAS_IOPORT=y and LEGACY_PCI=n on both my local Ryzen 3990X
> > based workstation and Raspberry Pi 4 (DT). I guess at the moment it
> > would make most sense for special configs such as those tailored for
> > vitualization guets but in the end that would be something for
> > distributions to decide.
> 
> IMO, it makes sense to have a "default y" there, as on systems that
> support I/O space, disabling it will just randomly disable some drivers
> that could be required by some hardware. I won't doubt that some of 
> those could be ported from using inb/outb to use, instead, readb/writeb.

Makes sense, if these get more legacy over time we can always change
the default. This would also mean we don't need to change defconfigs
that include legacy PCI devices.

> 
> > Arnd described the options here:
> > https://lore.kernel.org/lkml/CAK8P3a3HHeP+Gw_k2P7Qtig0OmErf0HN30G22+qHic_uZTh11Q@mail.gmail.com/
> 
> Based on Arnd's description, LEGACY_PCI should depend on HAS_IOPORT.
> This is missing on patch 1. You should probably reorder your patch
> series to first create HAS_IOPORT and then add LEGACY_PCI with
> depends on, as otherwise it may cause randconfig build issues
> at robots and/or git bisect.
> 
> I would also suggest to first introduce such change and then send
> a per-subsystem LEGACY_PCI patch, as it would be a lot easier for
> maintainers to review.

Playing around with the reordering I think it might make sense to
introduce HAS_IOPORT in patch 01, then LEGACY_PCI in patch 02 and then
add dependencies for both on a per subsystem basis. I think it would be
overkill to have two series of per subsystem patches.

> 
> > >   
> > > > This
> > > > includes pre-PCIe devices as well as PCIe devices which require
> > > > features like I/O spaces. The "legacy" naming is comes from the PCIe
> > > > spec which in section 2.1.1.2 says "PCI Express supports I/O Space for
> > > > compatibility with legacy devices which require their use. Future
> > > > revisions of this specification may deprecate the use of I/O Space."  
> > > 
> > > I would still avoid calling it LEGACY_PCI, as this sounds too generic.
> > > 
> > > I didn't read the PCI/PCIe specs, but I suspect that are a lot more
> > > features that were/will be deprecated on PCI specs as time goes by.
> > > 
> > > So, I would, instead, use something like PCI_LEGACY_IO_SPACE or 
> > > HAVE_PCI_LEGACY_IO_SPACE, in order to let it clear what "legacy"
> > > means.  
> > 
> > Hmm, I'd like to hear Bjorn's opinion on this. Personally I feel like
> > LEGACY_PCI is pretty clear since most devices are either pre-PCIe
> > devices or a compatibility feature allowing drivers for a pre-PCIe
> > device to work with a PCIe device.
> 
> That's the main point: it is *not* disabling pre-PCIe devices or
> even legacy PCI drivers. It just disables a random set of drivers just
> because they use inb/outb instead of readb/writeb. It keeps several pure 
> PCI drivers selected, and disables some PCIe for no real reason.

That is not intentional. The dependencies are certainly not perfect yet
which is one of the reasons this is still an RFC. I hope getting these
right will be a lot easier if we do both LEGACY_PCI and HAS_IOPORT
dependency selection on a per subsystem basis.

> 
> Just to give one example, this symbol:
> 
> > diff --git a/drivers/media/cec/platform/Kconfig b/drivers/media/cec/platform/Kconfig
> > index b672d3142eb7..5e92ece5b104 100644
> > --- a/drivers/media/cec/platform/Kconfig
> > +++ b/drivers/media/cec/platform/Kconfig
> > @@ -100,7 +100,7 @@ config CEC_TEGRA
> >  config CEC_SECO
> >  	tristate "SECO Boards HDMI CEC driver"
> >  	depends on (X86 || IA64) || COMPILE_TEST
> > -	depends on PCI && DMI
> > +	depends on LEGACY_PCI && DMI
> >  	select CEC_CORE
> >  	select CEC_NOTIFIER
> >  	help
> 
> Disables HDMI CEC support on some Intel motherboards.
> Any distro meant to run on generic hardware should keep it selected.

As far as I can see this one actually uses a hardcoded I/O port numbers
and googling it looks like it's an on-board device on the UDOO x86
board. I guess that should indeed just be
"depends on PCI && DMI && HAS_IOPORT".

> 
> I can see some value of a "PCI_LEGACY" option to disable all
> non-PCIe drivers, but this is not the case here.
> 
> Thanks,
> Mauro

Ok, I think we definitely need to work on getting the dependencies
right. I do think we agree that once done correctly there is value in
such an option independent of HAS_IOPORT only gating inb() etc uses.
Mauro Carvalho Chehab Dec. 29, 2021, 12:12 p.m. UTC | #11
Em Wed, 29 Dec 2021 12:45:38 +0100
Niklas Schnelle <schnelle@linux.ibm.com> escreveu:

> On Tue, 2021-12-28 at 18:12 +0100, Mauro Carvalho Chehab wrote:
> > Em Tue, 28 Dec 2021 16:06:44 +0100
> > Niklas Schnelle <schnelle@linux.ibm.com> escreveu:
> > 
> > (on a side note: the c/c list of this patch is too long. I would try to
> > avoid using a too long list, as otherwise this e-mail may end being rejected
> > by mail servers)
> >   
> > > On Tue, 2021-12-28 at 13:54 +0100, Mauro Carvalho Chehab wrote:  
> > > >    
> > > ---8<---  
> > > >       
> > > > > > > All you really care about is the "legacy" I/O spaces here, this isn't
> > > > > > > tied to PCI specifically at all, right?
> > > > > > > 
> > > > > > > So why not just have a OLD_STYLE_IO config option or something like
> > > > > > > that, to show that it's the i/o functions we care about here, not PCI at
> > > > > > > all?
> > > > > > > 
> > > > > > > And maybe not call it "old" or "legacy" as time constantly goes forward,
> > > > > > > just describe it as it is, "DIRECT_IO"?      
> > > > > > 
> > > > > > Agreed. HAVE_PCI_DIRECT_IO (or something similar) seems a more appropriate
> > > > > > name for it.
> > > > > > 
> > > > > > Thanks,
> > > > > > Mauro      
> > > > > 
> > > > > Hmm, I might be missing something here but that sounds a lot like the
> > > > > HAS_IOPORT option added in patch 02.
> > > > > 
> > > > > We add both LEGACY_PCI and HAS_IOPORT to differentiate between two
> > > > > cases. HAS_IOPORT is for PC-style devices that are not on a PCI card
> > > > > while LEGACY_PCI is for PCI drivers that require port I/O.     
> > > > 
> > > > I didn't look at the other patches on this series, but why it is needed
> > > > to deal with them on a separate way? Won't "PCI" and "HAS_IOPORT" be enough? 
> > > > 
> > > > I mean, are there any architecture where HAVE_PCI=y and HAS_IOPORT=y
> > > > where LEGACY_PCI shall be "n"?    
> > > 
> > > In the current patch set LEGACY_PCI is not currently selected by
> > > architectures, though of course it could be if we know that an
> > > architecture requires it. We should probably also set it in any
> > > defconfig that has devices depending on it so as not to break these.
> > > 
> > > Other than that it would be set during kernel configuration if one
> > > wants/needs support for legacy PCI devices. For testing I ran with
> > > HAVE_PCI=y, HAS_IOPORT=y and LEGACY_PCI=n on both my local Ryzen 3990X
> > > based workstation and Raspberry Pi 4 (DT). I guess at the moment it
> > > would make most sense for special configs such as those tailored for
> > > vitualization guets but in the end that would be something for
> > > distributions to decide.  
> > 
> > IMO, it makes sense to have a "default y" there, as on systems that
> > support I/O space, disabling it will just randomly disable some drivers
> > that could be required by some hardware. I won't doubt that some of 
> > those could be ported from using inb/outb to use, instead, readb/writeb.  
> 
> Makes sense, if these get more legacy over time we can always change
> the default. This would also mean we don't need to change defconfigs
> that include legacy PCI devices.

Yes.

> >   
> > > Arnd described the options here:
> > > https://lore.kernel.org/lkml/CAK8P3a3HHeP+Gw_k2P7Qtig0OmErf0HN30G22+qHic_uZTh11Q@mail.gmail.com/  
> > 
> > Based on Arnd's description, LEGACY_PCI should depend on HAS_IOPORT.
> > This is missing on patch 1. You should probably reorder your patch
> > series to first create HAS_IOPORT and then add LEGACY_PCI with
> > depends on, as otherwise it may cause randconfig build issues
> > at robots and/or git bisect.
> > 
> > I would also suggest to first introduce such change and then send
> > a per-subsystem LEGACY_PCI patch, as it would be a lot easier for
> > maintainers to review.  
> 
> Playing around with the reordering I think it might make sense to
> introduce HAS_IOPORT in patch 01, then LEGACY_PCI in patch 02 and then
> add dependencies for both on a per subsystem basis. I think it would be
> overkill to have two series of per subsystem patches.

Makes sense to me. Yeah, a single series should work.

> >   
> > > >     
> > > > > This
> > > > > includes pre-PCIe devices as well as PCIe devices which require
> > > > > features like I/O spaces. The "legacy" naming is comes from the PCIe
> > > > > spec which in section 2.1.1.2 says "PCI Express supports I/O Space for
> > > > > compatibility with legacy devices which require their use. Future
> > > > > revisions of this specification may deprecate the use of I/O Space."    
> > > > 
> > > > I would still avoid calling it LEGACY_PCI, as this sounds too generic.
> > > > 
> > > > I didn't read the PCI/PCIe specs, but I suspect that are a lot more
> > > > features that were/will be deprecated on PCI specs as time goes by.
> > > > 
> > > > So, I would, instead, use something like PCI_LEGACY_IO_SPACE or 
> > > > HAVE_PCI_LEGACY_IO_SPACE, in order to let it clear what "legacy"
> > > > means.    
> > > 
> > > Hmm, I'd like to hear Bjorn's opinion on this. Personally I feel like
> > > LEGACY_PCI is pretty clear since most devices are either pre-PCIe
> > > devices or a compatibility feature allowing drivers for a pre-PCIe
> > > device to work with a PCIe device.  
> > 
> > That's the main point: it is *not* disabling pre-PCIe devices or
> > even legacy PCI drivers. It just disables a random set of drivers just
> > because they use inb/outb instead of readb/writeb. It keeps several pure 
> > PCI drivers selected, and disables some PCIe for no real reason.  
> 
> That is not intentional. The dependencies are certainly not perfect yet
> which is one of the reasons this is still an RFC. I hope getting these
> right will be a lot easier if we do both LEGACY_PCI and HAS_IOPORT
> dependency selection on a per subsystem basis.

Ok.

> > 
> > Just to give one example, this symbol:
> >   
> > > diff --git a/drivers/media/cec/platform/Kconfig b/drivers/media/cec/platform/Kconfig
> > > index b672d3142eb7..5e92ece5b104 100644
> > > --- a/drivers/media/cec/platform/Kconfig
> > > +++ b/drivers/media/cec/platform/Kconfig
> > > @@ -100,7 +100,7 @@ config CEC_TEGRA
> > >  config CEC_SECO
> > >  	tristate "SECO Boards HDMI CEC driver"
> > >  	depends on (X86 || IA64) || COMPILE_TEST
> > > -	depends on PCI && DMI
> > > +	depends on LEGACY_PCI && DMI
> > >  	select CEC_CORE
> > >  	select CEC_NOTIFIER
> > >  	help  
> > 
> > Disables HDMI CEC support on some Intel motherboards.
> > Any distro meant to run on generic hardware should keep it selected.  
> 
> As far as I can see this one actually uses a hardcoded I/O port numbers
> and googling it looks like it's an on-board device on the UDOO x86
> board. I guess that should indeed just be
> "depends on PCI && DMI && HAS_IOPORT".

Agreed.

> 
> > 
> > I can see some value of a "PCI_LEGACY" option to disable all
> > non-PCIe drivers, but this is not the case here.
> > 
> > Thanks,
> > Mauro  
> 
> Ok, I think we definitely need to work on getting the dependencies
> right.

Yes.

> I do think we agree that once done correctly there is value in
> such an option independent of HAS_IOPORT only gating inb() etc uses.

Personally, I don't see much value on a Kconfig var for legacy PCI I/O 
space. From maintenance PoV, bots won't be triggered if someone use
HAS_IOPORT instead of the PCI specific one - or vice-versa. So, we
could end having a mix of both at the wrong places, in long term.

Also, assuming that PCIe hardware will some day abandon support for 
"legacy" PCI I/O space, I guess some runtime logic would be needed, 
in order to work with both kinds of PCIe controllers. So, having a
Kconfig option won't help much, IMO.

So, my personal preference would be to have just one Kconfig var, but
I'm ok if the PCI maintainers decide otherwise.

Thanks,
Mauro
Bjorn Helgaas Dec. 29, 2021, 4:03 p.m. UTC | #12
On Wed, Dec 29, 2021 at 01:12:07PM +0100, Mauro Carvalho Chehab wrote:
> Em Wed, 29 Dec 2021 12:45:38 +0100
> Niklas Schnelle <schnelle@linux.ibm.com> escreveu:
> > ...

> > I do think we agree that once done correctly there is value in
> > such an option independent of HAS_IOPORT only gating inb() etc uses.

I'm not sure I'm convinced about this.  For s390, you could do this
patch series, where you don't define inb() at all, and you add new
dependencies to prevent compile errors.  Or you could define inb() to
return ~0, which is what happens on other platforms when the device is
not present.

> Personally, I don't see much value on a Kconfig var for legacy PCI I/O 
> space. From maintenance PoV, bots won't be triggered if someone use
> HAS_IOPORT instead of the PCI specific one - or vice-versa. So, we
> could end having a mix of both at the wrong places, in long term.
> 
> Also, assuming that PCIe hardware will some day abandon support for 
> "legacy" PCI I/O space, I guess some runtime logic would be needed, 
> in order to work with both kinds of PCIe controllers. So, having a
> Kconfig option won't help much, IMO.
> 
> So, my personal preference would be to have just one Kconfig var, but
> I'm ok if the PCI maintainers decide otherwise.

I don't really like the "LEGACY_PCI" Kconfig option.  "Legacy" just
means something old and out of favor; it doesn't say *what* that
something is.

I think you're specifically interested in I/O port space usage, and it
seems that you want all PCI drivers that *only* use I/O port space to
depend on LEGACY_PCI?  Drivers that can use either I/O or memory
space or both would not depend on LEGACY_PCI?  This seems a little
murky and error-prone.

What if you used the approach from [1] but just dropped the warning?
The inb() would return ~0 if the platform doesn't support I/O port
space.  Drivers should be prepared to handle that because that's what
happens if the device doesn't exist.  

HAS_IOPORT and LEGACY_PCI is a lot of Kconfiggery that basically just
avoids building drivers that aren't useful on s390.  I'm not sure the
benefit outweighs the complication.

Bjorn

[1] https://lore.kernel.org/lkml/CAHk-=wg80je=K7madF4e7WrRNp37e3qh6y10Svhdc7O8SZ_-8g@mail.gmail.com/
Niklas Schnelle Dec. 29, 2021, 4:55 p.m. UTC | #13
On Wed, 2021-12-29 at 10:03 -0600, Bjorn Helgaas wrote:
> On Wed, Dec 29, 2021 at 01:12:07PM +0100, Mauro Carvalho Chehab wrote:
> > Em Wed, 29 Dec 2021 12:45:38 +0100
> > Niklas Schnelle <schnelle@linux.ibm.com> escreveu:
> > > ...
> > > I do think we agree that once done correctly there is value in
> > > such an option independent of HAS_IOPORT only gating inb() etc uses.
> 
> I'm not sure I'm convinced about this.  For s390, you could do this
> patch series, where you don't define inb() at all, and you add new
> dependencies to prevent compile errors.  Or you could define inb() to
> return ~0, which is what happens on other platforms when the device is
> not present.
> 
> > Personally, I don't see much value on a Kconfig var for legacy PCI I/O 
> > space. From maintenance PoV, bots won't be triggered if someone use
> > HAS_IOPORT instead of the PCI specific one - or vice-versa. So, we
> > could end having a mix of both at the wrong places, in long term.
> > 
> > Also, assuming that PCIe hardware will some day abandon support for 
> > "legacy" PCI I/O space, I guess some runtime logic would be needed, 
> > in order to work with both kinds of PCIe controllers. So, having a
> > Kconfig option won't help much, IMO.
> > 
> > So, my personal preference would be to have just one Kconfig var, but
> > I'm ok if the PCI maintainers decide otherwise.
> 
> I don't really like the "LEGACY_PCI" Kconfig option.  "Legacy" just
> means something old and out of favor; it doesn't say *what* that
> something is.
> 
> I think you're specifically interested in I/O port space usage, and it
> seems that you want all PCI drivers that *only* use I/O port space to
> depend on LEGACY_PCI?  Drivers that can use either I/O or memory
> space or both would not depend on LEGACY_PCI?  This seems a little
> murky and error-prone.

I'd like to hear Arnd's opinion on this but you're the PCI maintainer
so of course your buy-in would be quite important for such an option.

> 
> What if you used the approach from [1] but just dropped the warning?
> The inb() would return ~0 if the platform doesn't support I/O port
> space.  Drivers should be prepared to handle that because that's what
> happens if the device doesn't exist.

Hmm, in that mail Linus very clearly and specifically asked for this to
be a compile-time thing. So, if we do want to make it compile-time but
keep the potential errors to a minimum I guess just having HAS_IOPORT
might be valid compromise. It gets caught by bots through allyesconfig
or randconfig on HAS_IOPORT=n architectures. Also it has a nice
symmetry with the existing HAS_IOMEM. 

>  
> 
> HAS_IOPORT and LEGACY_PCI is a lot of Kconfiggery that basically just
> avoids building drivers that aren't useful on s390.  I'm not sure the
> benefit outweighs the complication.
> 
> Bjorn
> 
> [1] https://lore.kernel.org/lkml/CAHk-=wg80je=K7madF4e7WrRNp37e3qh6y10Svhdc7O8SZ_-8g@mail.gmail.com/
> 

Despite s390 I believe it would also affect nds32, um, h8300, nios2,
openrisc, hexagon, csky, and xtensa. But yes none of these is any less
niche than us. I do wonder if we will see a new drivers using I/O
ports?
John Garry Jan. 5, 2022, 5:42 p.m. UTC | #14
On 29/12/2021 16:55, Niklas Schnelle wrote:
> On Wed, 2021-12-29 at 10:03 -0600, Bjorn Helgaas wrote:
>> On Wed, Dec 29, 2021 at 01:12:07PM +0100, Mauro Carvalho Chehab wrote:
>>> Em Wed, 29 Dec 2021 12:45:38 +0100
>>> Niklas Schnelle<schnelle@linux.ibm.com>  escreveu:
>>>> ...
>>>> I do think we agree that once done correctly there is value in
>>>> such an option independent of HAS_IOPORT only gating inb() etc uses.
>> I'm not sure I'm convinced about this.  For s390, you could do this
>> patch series, where you don't define inb() at all, and you add new
>> dependencies to prevent compile errors.  Or you could define inb() to
>> return ~0, which is what happens on other platforms when the device is
>> not present.
>>
>>> Personally, I don't see much value on a Kconfig var for legacy PCI I/O
>>> space. From maintenance PoV, bots won't be triggered if someone use
>>> HAS_IOPORT instead of the PCI specific one - or vice-versa. So, we
>>> could end having a mix of both at the wrong places, in long term.
>>>
>>> Also, assuming that PCIe hardware will some day abandon support for
>>> "legacy" PCI I/O space, I guess some runtime logic would be needed,
>>> in order to work with both kinds of PCIe controllers. So, having a
>>> Kconfig option won't help much, IMO.
>>>
>>> So, my personal preference would be to have just one Kconfig var, but
>>> I'm ok if the PCI maintainers decide otherwise.
>> I don't really like the "LEGACY_PCI" Kconfig option.  "Legacy" just
>> means something old and out of favor; it doesn't say*what*  that
>> something is.
>>
>> I think you're specifically interested in I/O port space usage, and it
>> seems that you want all PCI drivers that*only*  use I/O port space to
>> depend on LEGACY_PCI?  Drivers that can use either I/O or memory
>> space or both would not depend on LEGACY_PCI?  This seems a little
>> murky and error-prone.
> I'd like to hear Arnd's opinion on this but you're the PCI maintainer
> so of course your buy-in would be quite important for such an option.
> 

Hi Niklas,

I can't see the value in the LEGACY_PCI config - however I don't really 
understand Arnd's original intention.

It was written that it would allow us to control "whether we have any 
pre-PCIe devices or those PCIe drivers that need PIO accessors other 
than ioport_map()/pci_iomap()".

However I just don't see why CONFIG_PCI=y and CONFIG_HAS_IOPORT=y aren't 
always the gating factor here. Arnd?

Thanks,
John
Bjorn Helgaas Jan. 5, 2022, 7:47 p.m. UTC | #15
On Wed, Jan 05, 2022 at 05:42:16PM +0000, John Garry wrote:
> On 29/12/2021 16:55, Niklas Schnelle wrote:
> > On Wed, 2021-12-29 at 10:03 -0600, Bjorn Helgaas wrote:
> > > On Wed, Dec 29, 2021 at 01:12:07PM +0100, Mauro Carvalho Chehab wrote:
> > > > Em Wed, 29 Dec 2021 12:45:38 +0100
> > > > Niklas Schnelle<schnelle@linux.ibm.com>  escreveu:
> > > > > ...
> > > > > I do think we agree that once done correctly there is value in
> > > > > such an option independent of HAS_IOPORT only gating inb() etc uses.
> > > I'm not sure I'm convinced about this.  For s390, you could do this
> > > patch series, where you don't define inb() at all, and you add new
> > > dependencies to prevent compile errors.  Or you could define inb() to
> > > return ~0, which is what happens on other platforms when the device is
> > > not present.
> > > 
> > > > Personally, I don't see much value on a Kconfig var for legacy PCI I/O
> > > > space. From maintenance PoV, bots won't be triggered if someone use
> > > > HAS_IOPORT instead of the PCI specific one - or vice-versa. So, we
> > > > could end having a mix of both at the wrong places, in long term.
> > > > 
> > > > Also, assuming that PCIe hardware will some day abandon support for
> > > > "legacy" PCI I/O space, I guess some runtime logic would be needed,
> > > > in order to work with both kinds of PCIe controllers. So, having a
> > > > Kconfig option won't help much, IMO.
> > > > 
> > > > So, my personal preference would be to have just one Kconfig var, but
> > > > I'm ok if the PCI maintainers decide otherwise.
> > > I don't really like the "LEGACY_PCI" Kconfig option.  "Legacy" just
> > > means something old and out of favor; it doesn't say*what*  that
> > > something is.
> > > 
> > > I think you're specifically interested in I/O port space usage, and it
> > > seems that you want all PCI drivers that *only* use I/O port space to
> > > depend on LEGACY_PCI?  Drivers that can use either I/O or memory
> > > space or both would not depend on LEGACY_PCI?  This seems a little
> > > murky and error-prone.
> > I'd like to hear Arnd's opinion on this but you're the PCI maintainer
> > so of course your buy-in would be quite important for such an option.

I'd like to hear Arnd's opinion, too.  If we do add LEGACY_PCI, I
think we need a clear guide for when to use it, e.g., "a PCI driver
that uses inb() must depend on LEGACY_PCI" or whatever it is.

I must be missing something because I don't see what we gain from
this.  We have PCI drivers, e.g., megaraid [1], for devices that have
either MEM or I/O BARs.  I think we want to build drivers like that on
any arch that supports PCI.

If the arch doesn't support I/O port space, devices that only have I/O
BARs won't work, of course, and hopefully the PCI core and driver can
figure that out and gracefully fail the probe.

But that same driver should still work with devices that have MEM
BARs.  If inb() isn't always present, I guess we could litter these
drivers with #ifdefs, but that would be pretty ugly.  IMO inb() should
be present but do something innocuous like return ~0, as it would if
I/O port space is supported but there's no device at that address.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/scsi/megaraid.c?id=v5.15#n4210

> I can't see the value in the LEGACY_PCI config - however I don't really
> understand Arnd's original intention.
> 
> It was written that it would allow us to control "whether we have any
> pre-PCIe devices or those PCIe drivers that need PIO accessors other than
> ioport_map()/pci_iomap()".
> 
> However I just don't see why CONFIG_PCI=y and CONFIG_HAS_IOPORT=y aren't
> always the gating factor here. Arnd?
> 
> Thanks,
> John
John Garry Jan. 6, 2022, 5:41 p.m. UTC | #16
On 05/01/2022 19:47, Bjorn Helgaas wrote:
>>>>>   ok if the PCI maintainers decide otherwise.
>>>> I don't really like the "LEGACY_PCI" Kconfig option.  "Legacy" just
>>>> means something old and out of favor; it doesn't say*what*  that
>>>> something is.
>>>>
>>>> I think you're specifically interested in I/O port space usage, and it
>>>> seems that you want all PCI drivers that*only*  use I/O port space to
>>>> depend on LEGACY_PCI?  Drivers that can use either I/O or memory
>>>> space or both would not depend on LEGACY_PCI?  This seems a little
>>>> murky and error-prone.
>>> I'd like to hear Arnd's opinion on this but you're the PCI maintainer
>>> so of course your buy-in would be quite important for such an option.
> I'd like to hear Arnd's opinion, too.  If we do add LEGACY_PCI, I
> think we need a clear guide for when to use it, e.g., "a PCI driver
> that uses inb() must depend on LEGACY_PCI" or whatever it is.
> 
> I must be missing something because I don't see what we gain from
> this.  We have PCI drivers, e.g., megaraid [1], for devices that have
> either MEM or I/O BARs.  I think we want to build drivers like that on
> any arch that supports PCI.
> 
> If the arch doesn't support I/O port space, devices that only have I/O
> BARs won't work, of course, and hopefully the PCI core and driver can
> figure that out and gracefully fail the probe.
> 
> But that same driver should still work with devices that have MEM
> BARs.  If inb() isn't always present, I guess we could litter these
> drivers with #ifdefs, but that would be pretty ugly. 

There were some ifdefs added to the 8250 drivers in Arnd's original 
patch [0], but it does not seem included here.

Niklas, what happened to the 8250 and the other driver changes?

[0] 
https://lore.kernel.org/lkml/CAK8P3a0MNbx-iuzW_-=0ab6-TTZzwV-PT_6gAC1Gp5PgYyHcrA@mail.gmail.com/

> IMO inb() should
> be present but do something innocuous like return ~0, as it would if
> I/O port space is supported but there's no device at that address.
> 
> [1]https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/scsi/megaraid.c?id=v5.15#n4210
> 

That driver would prob not be used on systems which does not support 
PIO, and so could have a HAS_IOPORT dependency. But it is not strictly 
necessary.

Anyway, it would be good to have an idea of how much ifdeffery is 
required in drivers.

Thanks,
John
Bjorn Helgaas Jan. 6, 2022, 6:14 p.m. UTC | #17
On Thu, Jan 06, 2022 at 05:41:00PM +0000, John Garry wrote:
> On 05/01/2022 19:47, Bjorn Helgaas wrote:

> > IMO inb() should
> > be present but do something innocuous like return ~0, as it would if
> > I/O port space is supported but there's no device at that address.
> > 
> > [1]https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/scsi/megaraid.c?id=v5.15#n4210
> > 
> 
> That driver would prob not be used on systems which does not support PIO,
> and so could have a HAS_IOPORT dependency. But it is not strictly necessary.

I don't want the path of "this driver isn't needed because the device
is unlikely to be used on this arch."

Maybe it's not _always_ possible, but if the device can be plugged
into the platform, I think we should be able to build the driver for
it.

If the device requires I/O port space and the platform doesn't support
it, the PCI core or the driver should detect that and give a useful
diagnostic.

Bjorn
John Garry Jan. 7, 2022, 5:16 p.m. UTC | #18
On 06/01/2022 18:14, Bjorn Helgaas wrote:
>> That driver would prob not be used on systems which does not support PIO,
>> and so could have a HAS_IOPORT dependency. But it is not strictly necessary.
> I don't want the path of "this driver isn't needed because the device
> is unlikely to be used on this arch."

Sure, that was just a one off example. As I mentioned before, I think 
that Arnd already did most of the ifdeffery work, but it was not 
included in this series.

> 
> Maybe it's not_always_  possible, but if the device can be plugged
> into the platform, I think we should be able to build the driver for
> it.
> 
> If the device requires I/O port space and the platform doesn't support
> it, the PCI core or the driver should detect that and give a useful
> diagnostic.
> 

I'm not sure what the driver can say apart from -ENODEV. Or IO port 
management in resource.c could warn for requesting IO port region when 
it's unsupported.

Anyway, this same conversion was had with Linus before I got involved. 
If you think it is worth discussing again then I suppose the authors 
here need to gain consensus.

Thanks,
John
Niklas Schnelle Jan. 10, 2022, 9:34 a.m. UTC | #19
On Thu, 2022-01-06 at 17:41 +0000, John Garry wrote:
> On 05/01/2022 19:47, Bjorn Helgaas wrote:
> > > > > >   ok if the PCI maintainers decide otherwise.
> > > > > I don't really like the "LEGACY_PCI" Kconfig option.  "Legacy" just
> > > > > means something old and out of favor; it doesn't say*what*  that
> > > > > something is.
> > > > > 
> > > > > I think you're specifically interested in I/O port space usage, and it
> > > > > seems that you want all PCI drivers that*only*  use I/O port space to
> > > > > depend on LEGACY_PCI?  Drivers that can use either I/O or memory
> > > > > space or both would not depend on LEGACY_PCI?  This seems a little
> > > > > murky and error-prone.
> > > > I'd like to hear Arnd's opinion on this but you're the PCI maintainer
> > > > so of course your buy-in would be quite important for such an option.
> > I'd like to hear Arnd's opinion, too.  If we do add LEGACY_PCI, I
> > think we need a clear guide for when to use it, e.g., "a PCI driver
> > that uses inb() must depend on LEGACY_PCI" or whatever it is.
> > 
> > I must be missing something because I don't see what we gain from
> > this.  We have PCI drivers, e.g., megaraid [1], for devices that have
> > either MEM or I/O BARs.  I think we want to build drivers like that on
> > any arch that supports PCI.
> > 
> > If the arch doesn't support I/O port space, devices that only have I/O
> > BARs won't work, of course, and hopefully the PCI core and driver can
> > figure that out and gracefully fail the probe.
> > 
> > But that same driver should still work with devices that have MEM
> > BARs.  If inb() isn't always present, I guess we could litter these
> > drivers with #ifdefs, but that would be pretty ugly.

I think this is the big question here. If we do go with a compile-time
solution as requested by Linus we will either get a lot of #ifdeffery,
coarse driver dependencies or as proposed by Alan Stern for the USB
#ifdefs might end up turning inb() into a compile-time nop.

The originally proposed change that returned ~0 from inb() and printed
a warning clearly is the simpler change and sure we could also drop the
warning. I'm honestly torn, I do agree with Linus that we shouldn't
have run-time things that we know at compile-time will not work but I
also dislike all the #ifdeffery a compile-time solution requires. Sadly
C really doesn't give us any better tools here.

Also I 100% agree with you Bjorn how likely it is to see a device on a
platform really shouldn't matter. Without going into details, on s390
we have already beneffited from PCI drivers working with 0 changes to
support devices we previously didn't have on the platform or
anticipated we would get in the future. Consequently drivers that could
work in principle should be built.

> >  
> 
> There were some ifdefs added to the 8250 drivers in Arnd's original 
> patch [0], but it does not seem included here.
> 
> Niklas, what happened to the 8250 and the other driver changes?

I missed it during the rebase, likely because the changed files compile
depend on !S390 via config SERIAL_8250 and thus didn't cause any errors
for my allyesconfig. That !S390 dependency is of course not really what
we want if the driver can use MEM BARs.
diff mbox series

Patch

diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index a7da8ea7b3ed..32e0489bd01c 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -556,7 +556,7 @@  comment "PATA SFF controllers with BMDMA"
 
 config PATA_ALI
 	tristate "ALi PATA support"
-	depends on PCI
+	depends on LEGACY_PCI
 	select PATA_TIMINGS
 	help
 	  This option enables support for the ALi ATA interfaces
@@ -566,7 +566,7 @@  config PATA_ALI
 
 config PATA_AMD
 	tristate "AMD/NVidia PATA support"
-	depends on PCI
+	depends on LEGACY_PCI
 	select PATA_TIMINGS
 	help
 	  This option enables support for the AMD and NVidia PATA
@@ -584,7 +584,7 @@  config PATA_ARASAN_CF
 
 config PATA_ARTOP
 	tristate "ARTOP 6210/6260 PATA support"
-	depends on PCI
+	depends on LEGACY_PCI
 	help
 	  This option enables support for ARTOP PATA controllers.
 
@@ -621,7 +621,7 @@  config PATA_BK3710
 
 config PATA_CMD64X
 	tristate "CMD64x PATA support"
-	depends on PCI
+	depends on LEGACY_PCI
 	select PATA_TIMINGS
 	help
 	  This option enables support for the CMD64x series chips
@@ -667,7 +667,7 @@  config PATA_CS5536
 
 config PATA_CYPRESS
 	tristate "Cypress CY82C693 PATA support (Very Experimental)"
-	depends on PCI
+	depends on LEGACY_PCI
 	select PATA_TIMINGS
 	help
 	  This option enables support for the Cypress/Contaq CY82C693
@@ -707,7 +707,7 @@  config PATA_FTIDE010
 
 config PATA_HPT366
 	tristate "HPT 366/368 PATA support"
-	depends on PCI
+	depends on LEGACY_PCI
 	help
 	  This option enables support for the HPT 366 and 368
 	  PATA controllers via the new ATA layer.
@@ -716,7 +716,7 @@  config PATA_HPT366
 
 config PATA_HPT37X
 	tristate "HPT 370/370A/371/372/374/302 PATA support"
-	depends on PCI
+	depends on LEGACY_PCI
 	help
 	  This option enables support for the majority of the later HPT
 	  PATA controllers via the new ATA layer.
@@ -725,7 +725,7 @@  config PATA_HPT37X
 
 config PATA_HPT3X2N
 	tristate "HPT 371N/372N/302N PATA support"
-	depends on PCI
+	depends on LEGACY_PCI
 	help
 	  This option enables support for the N variant HPT PATA
 	  controllers via the new ATA layer.
@@ -828,7 +828,7 @@  config PATA_MPC52xx
 
 config PATA_NETCELL
 	tristate "NETCELL Revolution RAID support"
-	depends on PCI
+	depends on LEGACY_PCI
 	help
 	  This option enables support for the Netcell Revolution RAID
 	  PATA controller.
@@ -864,7 +864,7 @@  config PATA_OLDPIIX
 
 config PATA_OPTIDMA
 	tristate "OPTI FireStar PATA support (Very Experimental)"
-	depends on PCI
+	depends on LEGACY_PCI
 	help
 	  This option enables DMA/PIO support for the later OPTi
 	  controllers found on some old motherboards and in some
@@ -874,7 +874,7 @@  config PATA_OPTIDMA
 
 config PATA_PDC2027X
 	tristate "Promise PATA 2027x support"
-	depends on PCI
+	depends on LEGACY_PCI
 	help
 	  This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
 
@@ -882,7 +882,7 @@  config PATA_PDC2027X
 
 config PATA_PDC_OLD
 	tristate "Older Promise PATA controller support"
-	depends on PCI
+	depends on LEGACY_PCI
 	help
 	  This option enables support for the Promise 20246, 20262, 20263,
 	  20265 and 20267 adapters.
@@ -910,7 +910,7 @@  config PATA_RDC
 
 config PATA_SC1200
 	tristate "SC1200 PATA support"
-	depends on PCI && (X86_32 || COMPILE_TEST)
+	depends on LEGACY_PCI && (X86_32 || COMPILE_TEST)
 	help
 	  This option enables support for the NatSemi/AMD SC1200 SoC
 	  companion chip used with the Geode processor family.
@@ -928,7 +928,7 @@  config PATA_SCH
 
 config PATA_SERVERWORKS
 	tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
-	depends on PCI
+	depends on LEGACY_PCI
 	help
 	  This option enables support for the Serverworks OSB4/CSB5/CSB6 and
 	  HT1000 PATA controllers, via the new ATA layer.
@@ -1005,7 +1005,7 @@  comment "PIO-only SFF controllers"
 
 config PATA_CMD640_PCI
 	tristate "CMD640 PCI PATA support (Experimental)"
-	depends on PCI
+	depends on LEGACY_PCI
 	select PATA_TIMINGS
 	help
 	  This option enables support for the CMD640 PCI IDE
@@ -1086,7 +1086,7 @@  config PATA_NS87410
 
 config PATA_OPTI
 	tristate "OPTI621/6215 PATA support (Very Experimental)"
-	depends on PCI
+	depends on LEGACY_PCI
 	help
 	  This option enables full PIO support for the early Opti ATA
 	  controllers found on some old motherboards.
@@ -1197,7 +1197,7 @@  config ATA_GENERIC
 
 config PATA_LEGACY
 	tristate "Legacy ISA PATA support (Experimental)"
-	depends on (ISA || PCI)
+	depends on (ISA || LEGACY_PCI)
 	select PATA_TIMINGS
 	help
 	  This option enables support for ISA/VLB/PCI bus legacy PATA
diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c
index 20a32e4d501d..791942217e2c 100644
--- a/drivers/ata/ata_generic.c
+++ b/drivers/ata/ata_generic.c
@@ -197,7 +197,8 @@  static int ata_generic_init_one(struct pci_dev *dev, const struct pci_device_id
 	if (!(command & PCI_COMMAND_IO))
 		return -ENODEV;
 
-	if (dev->vendor == PCI_VENDOR_ID_AL)
+	if (IS_ENABLED(CONFIG_LEGACY_PCI) &&
+	    dev->vendor == PCI_VENDOR_ID_AL)
 		ata_pci_bmdma_clear_simplex(dev);
 
 	if (dev->vendor == PCI_VENDOR_ID_ATI) {
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index b71ea4a680b0..636848ab6839 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -3107,6 +3107,7 @@  EXPORT_SYMBOL_GPL(ata_bmdma_port_start32);
 
 #ifdef CONFIG_PCI
 
+#ifdef CONFIG_LEGACY_PCI
 /**
  *	ata_pci_bmdma_clear_simplex -	attempt to kick device out of simplex
  *	@pdev: PCI device
@@ -3132,6 +3133,7 @@  int ata_pci_bmdma_clear_simplex(struct pci_dev *pdev)
 	return 0;
 }
 EXPORT_SYMBOL_GPL(ata_pci_bmdma_clear_simplex);
+#endif
 
 static void ata_bmdma_nodma(struct ata_host *host, const char *reason)
 {
diff --git a/drivers/comedi/Kconfig b/drivers/comedi/Kconfig
index 3cb61fa2c5c3..1b642716c5d3 100644
--- a/drivers/comedi/Kconfig
+++ b/drivers/comedi/Kconfig
@@ -572,6 +572,7 @@  if COMEDI_PCI_DRIVERS
 
 config COMEDI_8255_PCI
 	tristate "Generic PCI based 8255 digital i/o board support"
+	depends on LEGACY_PCI
 	select COMEDI_8255
 	help
 	  Enable support for PCI based 8255 digital i/o boards. This driver
@@ -589,6 +590,7 @@  config COMEDI_8255_PCI
 
 config COMEDI_ADDI_WATCHDOG
 	tristate
+	depends on LEGACY_PCI
 	help
 	  Provides support for the watchdog subdevice found on many ADDI-DATA
 	  boards. This module will be automatically selected when needed. The
@@ -596,6 +598,7 @@  config COMEDI_ADDI_WATCHDOG
 
 config COMEDI_ADDI_APCI_1032
 	tristate "ADDI-DATA APCI_1032 support"
+	depends on LEGACY_PCI
 	help
 	  Enable support for ADDI-DATA APCI_1032 cards
 
@@ -604,6 +607,7 @@  config COMEDI_ADDI_APCI_1032
 
 config COMEDI_ADDI_APCI_1500
 	tristate "ADDI-DATA APCI_1500 support"
+	depends on LEGACY_PCI
 	help
 	  Enable support for ADDI-DATA APCI_1500 cards
 
@@ -612,6 +616,7 @@  config COMEDI_ADDI_APCI_1500
 
 config COMEDI_ADDI_APCI_1516
 	tristate "ADDI-DATA APCI-1016/1516/2016 support"
+	depends on LEGACY_PCI
 	select COMEDI_ADDI_WATCHDOG
 	help
 	  Enable support for ADDI-DATA APCI-1016, APCI-1516 and APCI-2016 boards.
@@ -623,6 +628,7 @@  config COMEDI_ADDI_APCI_1516
 
 config COMEDI_ADDI_APCI_1564
 	tristate "ADDI-DATA APCI_1564 support"
+	depends on LEGACY_PCI
 	select COMEDI_ADDI_WATCHDOG
 	help
 	  Enable support for ADDI-DATA APCI_1564 cards
@@ -632,6 +638,7 @@  config COMEDI_ADDI_APCI_1564
 
 config COMEDI_ADDI_APCI_16XX
 	tristate "ADDI-DATA APCI_16xx support"
+	depends on LEGACY_PCI
 	help
 	  Enable support for ADDI-DATA APCI_16xx cards
 
@@ -640,6 +647,7 @@  config COMEDI_ADDI_APCI_16XX
 
 config COMEDI_ADDI_APCI_2032
 	tristate "ADDI-DATA APCI_2032 support"
+	depends on LEGACY_PCI
 	select COMEDI_ADDI_WATCHDOG
 	help
 	  Enable support for ADDI-DATA APCI_2032 cards
@@ -649,6 +657,7 @@  config COMEDI_ADDI_APCI_2032
 
 config COMEDI_ADDI_APCI_2200
 	tristate "ADDI-DATA APCI_2200 support"
+	depends on LEGACY_PCI
 	select COMEDI_ADDI_WATCHDOG
 	help
 	  Enable support for ADDI-DATA APCI_2200 cards
@@ -658,6 +667,7 @@  config COMEDI_ADDI_APCI_2200
 
 config COMEDI_ADDI_APCI_3120
 	tristate "ADDI-DATA APCI_3120/3001 support"
+	depends on LEGACY_PCI
 	depends on HAS_DMA
 	help
 	  Enable support for ADDI-DATA APCI_3120/3001 cards
@@ -667,6 +677,7 @@  config COMEDI_ADDI_APCI_3120
 
 config COMEDI_ADDI_APCI_3501
 	tristate "ADDI-DATA APCI_3501 support"
+	depends on LEGACY_PCI
 	help
 	  Enable support for ADDI-DATA APCI_3501 cards
 
@@ -675,6 +686,7 @@  config COMEDI_ADDI_APCI_3501
 
 config COMEDI_ADDI_APCI_3XXX
 	tristate "ADDI-DATA APCI_3xxx support"
+	depends on LEGACY_PCI
 	help
 	  Enable support for ADDI-DATA APCI_3xxx cards
 
@@ -683,6 +695,7 @@  config COMEDI_ADDI_APCI_3XXX
 
 config COMEDI_ADL_PCI6208
 	tristate "ADLink PCI-6208A support"
+	depends on LEGACY_PCI
 	help
 	  Enable support for ADLink PCI-6208A cards
 
@@ -691,6 +704,7 @@  config COMEDI_ADL_PCI6208
 
 config COMEDI_ADL_PCI7X3X
 	tristate "ADLink PCI-723X/743X isolated digital i/o board support"
+	depends on LEGACY_PCI
 	help
 	  Enable support for ADlink PCI-723X/743X isolated digital i/o boards.
 	  Supported boards include the 32-channel PCI-7230 (16 in/16 out),
@@ -702,6 +716,7 @@  config COMEDI_ADL_PCI7X3X
 
 config COMEDI_ADL_PCI8164
 	tristate "ADLink PCI-8164 4 Axes Motion Control board support"
+	depends on LEGACY_PCI
 	help
 	  Enable support for ADlink PCI-8164 4 Axes Motion Control board
 
@@ -710,6 +725,7 @@  config COMEDI_ADL_PCI8164
 
 config COMEDI_ADL_PCI9111
 	tristate "ADLink PCI-9111HR support"
+	depends on LEGACY_PCI
 	select COMEDI_8254
 	help
 	  Enable support for ADlink PCI9111 cards
@@ -719,6 +735,7 @@  config COMEDI_ADL_PCI9111
 
 config COMEDI_ADL_PCI9118
 	tristate "ADLink PCI-9118DG, PCI-9118HG, PCI-9118HR support"
+	depends on LEGACY_PCI
 	depends on HAS_DMA
 	select COMEDI_8254
 	help
@@ -729,6 +746,7 @@  config COMEDI_ADL_PCI9118
 
 config COMEDI_ADV_PCI1710
 	tristate "Advantech PCI-171x and PCI-1731 support"
+	depends on LEGACY_PCI
 	select COMEDI_8254
 	help
 	  Enable support for Advantech PCI-1710, PCI-1710HG, PCI-1711,
@@ -739,6 +757,7 @@  config COMEDI_ADV_PCI1710
 
 config COMEDI_ADV_PCI1720
 	tristate "Advantech PCI-1720 support"
+	depends on LEGACY_PCI
 	help
 	  Enable support for Advantech PCI-1720 Analog Output board.
 
@@ -747,6 +766,7 @@  config COMEDI_ADV_PCI1720
 
 config COMEDI_ADV_PCI1723
 	tristate "Advantech PCI-1723 support"
+	depends on LEGACY_PCI
 	help
 	  Enable support for Advantech PCI-1723 cards
 
@@ -755,6 +775,7 @@  config COMEDI_ADV_PCI1723
 
 config COMEDI_ADV_PCI1724
 	tristate "Advantech PCI-1724U support"
+	depends on LEGACY_PCI
 	help
 	  Enable support for Advantech PCI-1724U cards.  These are 32-channel
 	  analog output cards with voltage and current loop output ranges and
@@ -765,6 +786,7 @@  config COMEDI_ADV_PCI1724
 
 config COMEDI_ADV_PCI1760
 	tristate "Advantech PCI-1760 support"
+	depends on LEGACY_PCI
 	help
 	  Enable support for Advantech PCI-1760 board.
 
@@ -773,6 +795,7 @@  config COMEDI_ADV_PCI1760
 
 config COMEDI_ADV_PCI_DIO
 	tristate "Advantech PCI DIO card support"
+	depends on LEGACY_PCI
 	select COMEDI_8254
 	select COMEDI_8255
 	help
@@ -786,6 +809,7 @@  config COMEDI_ADV_PCI_DIO
 
 config COMEDI_AMPLC_DIO200_PCI
 	tristate "Amplicon PCI215/PCI272/PCIe215/PCIe236/PCIe296 DIO support"
+	depends on LEGACY_PCI
 	select COMEDI_AMPLC_DIO200
 	help
 	  Enable support for Amplicon PCI215, PCI272, PCIe215, PCIe236
@@ -796,6 +820,7 @@  config COMEDI_AMPLC_DIO200_PCI
 
 config COMEDI_AMPLC_PC236_PCI
 	tristate "Amplicon PCI236 DIO board support"
+	depends on LEGACY_PCI
 	select COMEDI_AMPLC_PC236
 	help
 	  Enable support for Amplicon PCI236 DIO board.
@@ -805,6 +830,7 @@  config COMEDI_AMPLC_PC236_PCI
 
 config COMEDI_AMPLC_PC263_PCI
 	tristate "Amplicon PCI263 relay board support"
+	depends on LEGACY_PCI
 	help
 	  Enable support for Amplicon PCI263 relay board.  This is a PCI board
 	  with 16 reed relay output channels.
@@ -814,6 +840,7 @@  config COMEDI_AMPLC_PC263_PCI
 
 config COMEDI_AMPLC_PCI224
 	tristate "Amplicon PCI224 and PCI234 support"
+	depends on LEGACY_PCI
 	select COMEDI_8254
 	help
 	  Enable support for Amplicon PCI224 and PCI234 AO boards
@@ -823,6 +850,7 @@  config COMEDI_AMPLC_PCI224
 
 config COMEDI_AMPLC_PCI230
 	tristate "Amplicon PCI230 and PCI260 support"
+	depends on LEGACY_PCI
 	select COMEDI_8254
 	select COMEDI_8255
 	help
@@ -834,6 +862,7 @@  config COMEDI_AMPLC_PCI230
 
 config COMEDI_CONTEC_PCI_DIO
 	tristate "Contec PIO1616L digital I/O board support"
+	depends on LEGACY_PCI
 	help
 	  Enable support for the Contec PIO1616L digital I/O board
 
@@ -842,6 +871,7 @@  config COMEDI_CONTEC_PCI_DIO
 
 config COMEDI_DAS08_PCI
 	tristate "DAS-08 PCI support"
+	depends on LEGACY_PCI
 	select COMEDI_DAS08
 	help
 	  Enable support for PCI DAS-08 cards.
@@ -861,6 +891,7 @@  config COMEDI_DT3000
 
 config COMEDI_DYNA_PCI10XX
 	tristate "Dynalog PCI DAQ series support"
+	depends on LEGACY_PCI
 	help
 	  Enable support for Dynalog PCI DAQ series
 	  PCI-1050
@@ -894,6 +925,7 @@  config COMEDI_ICP_MULTI
 
 config COMEDI_DAQBOARD2000
 	tristate "IOtech DAQboard/2000 support"
+	depends on LEGACY_PCI
 	select COMEDI_8255
 	help
 	  Enable support for the IOtech DAQboard/2000
@@ -911,6 +943,7 @@  config COMEDI_JR3_PCI
 
 config COMEDI_KE_COUNTER
 	tristate "Kolter-Electronic PCI Counter 1 card support"
+	depends on LEGACY_PCI
 	help
 	  Enable support for Kolter-Electronic PCI Counter 1 cards
 
@@ -919,6 +952,7 @@  config COMEDI_KE_COUNTER
 
 config COMEDI_CB_PCIDAS64
 	tristate "MeasurementComputing PCI-DAS 64xx, 60xx, and 4020 support"
+	depends on LEGACY_PCI
 	select COMEDI_8255
 	help
 	  Enable support for ComputerBoards/MeasurementComputing PCI-DAS 64xx,
@@ -929,6 +963,7 @@  config COMEDI_CB_PCIDAS64
 
 config COMEDI_CB_PCIDAS
 	tristate "MeasurementComputing PCI-DAS support"
+	depends on LEGACY_PCI
 	select COMEDI_8254
 	select COMEDI_8255
 	help
@@ -942,6 +977,7 @@  config COMEDI_CB_PCIDAS
 
 config COMEDI_CB_PCIDDA
 	tristate "MeasurementComputing PCI-DDA series support"
+	depends on LEGACY_PCI
 	select COMEDI_8255
 	help
 	  Enable support for ComputerBoards/MeasurementComputing PCI-DDA
@@ -953,6 +989,7 @@  config COMEDI_CB_PCIDDA
 
 config COMEDI_CB_PCIMDAS
 	tristate "MeasurementComputing PCIM-DAS1602/16, PCIe-DAS1602/16 support"
+	depends on LEGACY_PCI
 	select COMEDI_8254
 	select COMEDI_8255
 	help
@@ -964,6 +1001,7 @@  config COMEDI_CB_PCIMDAS
 
 config COMEDI_CB_PCIMDDA
 	tristate "MeasurementComputing PCIM-DDA06-16 support"
+	depends on LEGACY_PCI
 	select COMEDI_8255
 	help
 	  Enable support for ComputerBoards/MeasurementComputing PCIM-DDA06-16
@@ -973,6 +1011,7 @@  config COMEDI_CB_PCIMDDA
 
 config COMEDI_ME4000
 	tristate "Meilhaus ME-4000 support"
+	depends on LEGACY_PCI
 	select COMEDI_8254
 	help
 	  Enable support for Meilhaus PCI data acquisition cards
@@ -1031,6 +1070,7 @@  config COMEDI_NI_670X
 
 config COMEDI_NI_LABPC_PCI
 	tristate "NI Lab-PC PCI-1200 support"
+	depends on LEGACY_PCI
 	select COMEDI_NI_LABPC
 	help
 	  Enable support for National Instruments Lab-PC PCI-1200.
@@ -1040,6 +1080,7 @@  config COMEDI_NI_LABPC_PCI
 
 config COMEDI_NI_PCIDIO
 	tristate "NI PCI-DIO32HS, PCI-6533, PCI-6534 support"
+	depends on LEGACY_PCI
 	depends on HAS_DMA
 	select COMEDI_MITE
 	select COMEDI_8255
@@ -1052,6 +1093,7 @@  config COMEDI_NI_PCIDIO
 
 config COMEDI_NI_PCIMIO
 	tristate "NI PCI-MIO-E series and M series support"
+	depends on LEGACY_PCI
 	depends on HAS_DMA
 	select COMEDI_NI_TIOCMD
 	select COMEDI_8255
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 60d9374c72c0..d36afa5ac6fc 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -687,7 +687,7 @@  config GPIO_VR41XX
 
 config GPIO_VX855
 	tristate "VIA VX855/VX875 GPIO"
-	depends on (X86 || COMPILE_TEST) && PCI
+	depends on (X86 || COMPILE_TEST) && LEGACY_PCI
 	select MFD_CORE
 	select MFD_VX855
 	help
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 64bd3dfba2c4..09397562c396 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1654,7 +1654,7 @@  config SENSORS_S3C_RAW
 
 config SENSORS_SIS5595
 	tristate "Silicon Integrated Systems Corp. SiS5595"
-	depends on PCI
+	depends on LEGACY_PCI
 	help
 	  If you say yes here you get support for the integrated sensors in
 	  SiS5595 South Bridges.
@@ -1985,7 +1985,7 @@  config SENSORS_VIA_CPUTEMP
 
 config SENSORS_VIA686A
 	tristate "VIA686A"
-	depends on PCI
+	depends on LEGACY_PCI
 	help
 	  If you say yes here you get support for the integrated sensors in
 	  Via 686A/B South Bridges.
@@ -2006,7 +2006,7 @@  config SENSORS_VT1211
 
 config SENSORS_VT8231
 	tristate "VIA VT8231"
-	depends on PCI
+	depends on LEGACY_PCI
 	select HWMON_VID
 	help
 	  If you say yes here then you get support for the integrated sensors
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index dce392839017..a8d6274dc965 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -11,7 +11,7 @@  comment "PC SMBus host controller drivers"
 
 config I2C_ALI1535
 	tristate "ALI 1535"
-	depends on PCI
+	depends on LEGACY_PCI
 	help
 	  If you say yes to this option, support will be included for the SMB
 	  Host controller on Acer Labs Inc. (ALI) M1535 South Bridges.  The SMB
@@ -23,7 +23,7 @@  config I2C_ALI1535
 
 config I2C_ALI1563
 	tristate "ALI 1563"
-	depends on PCI
+	depends on LEGACY_PCI
 	help
 	  If you say yes to this option, support will be included for the SMB
 	  Host controller on Acer Labs Inc. (ALI) M1563 South Bridges.  The SMB
@@ -35,7 +35,7 @@  config I2C_ALI1563
 
 config I2C_ALI15X3
 	tristate "ALI 15x3"
-	depends on PCI
+	depends on LEGACY_PCI
 	help
 	  If you say yes to this option, support will be included for the
 	  Acer Labs Inc. (ALI) M1514 and M1543 motherboard I2C interfaces.
@@ -45,7 +45,7 @@  config I2C_ALI15X3
 
 config I2C_AMD756
 	tristate "AMD 756/766/768/8111 and nVidia nForce"
-	depends on PCI
+	depends on LEGACY_PCI
 	help
 	  If you say yes to this option, support will be included for the AMD
 	  756/766/768 mainboard I2C interfaces.  The driver also includes
@@ -70,7 +70,7 @@  config I2C_AMD756_S4882
 
 config I2C_AMD8111
 	tristate "AMD 8111"
-	depends on PCI
+	depends on LEGACY_PCI
 	help
 	  If you say yes to this option, support will be included for the
 	  second (SMBus 2.0) AMD 8111 mainboard I2C interface.
@@ -154,7 +154,7 @@  config I2C_I801
 
 config I2C_ISCH
 	tristate "Intel SCH SMBus 1.0"
-	depends on PCI
+	depends on LEGACY_PCI
 	select LPC_SCH
 	help
 	  Say Y here if you want to use SMBus controller on the Intel SCH
@@ -221,7 +221,7 @@  config I2C_CHT_WC
 
 config I2C_NFORCE2
 	tristate "Nvidia nForce2, nForce3 and nForce4"
-	depends on PCI
+	depends on LEGACY_PCI
 	help
 	  If you say yes to this option, support will be included for the Nvidia
 	  nForce2, nForce3 and nForce4 families of mainboard I2C interfaces.
@@ -253,7 +253,7 @@  config I2C_NVIDIA_GPU
 
 config I2C_SIS5595
 	tristate "SiS 5595"
-	depends on PCI
+	depends on LEGACY_PCI
 	help
 	  If you say yes to this option, support will be included for the
 	  SiS5595 SMBus (a subset of I2C) interface.
@@ -263,7 +263,7 @@  config I2C_SIS5595
 
 config I2C_SIS630
 	tristate "SiS 630/730/964"
-	depends on PCI
+	depends on LEGACY_PCI
 	help
 	  If you say yes to this option, support will be included for the
 	  SiS630, SiS730 and SiS964 SMBus (a subset of I2C) interface.
@@ -273,7 +273,7 @@  config I2C_SIS630
 
 config I2C_SIS96X
 	tristate "SiS 96x"
-	depends on PCI
+	depends on LEGACY_PCI
 	help
 	  If you say yes to this option, support will be included for the SiS
 	  96x SMBus (a subset of I2C) interfaces.  Specifically, the following
@@ -291,7 +291,7 @@  config I2C_SIS96X
 
 config I2C_VIA
 	tristate "VIA VT82C586B"
-	depends on PCI
+	depends on LEGACY_PCI
 	select I2C_ALGOBIT
 	help
 	  If you say yes to this option, support will be included for the VIA
@@ -302,7 +302,7 @@  config I2C_VIA
 
 config I2C_VIAPRO
 	tristate "VIA VT82C596/82C686/82xx and CX700/VX8xx/VX900"
-	depends on PCI
+	depends on LEGACY_PCI
 	help
 	  If you say yes to this option, support will be included for the VIA
 	  VT82C596 and later SMBus interface.  Specifically, the following
diff --git a/drivers/input/gameport/Kconfig b/drivers/input/gameport/Kconfig
index 5a2c2fb3217d..082280f95333 100644
--- a/drivers/input/gameport/Kconfig
+++ b/drivers/input/gameport/Kconfig
@@ -43,7 +43,7 @@  config GAMEPORT_L4
 
 config GAMEPORT_EMU10K1
 	tristate "SB Live and Audigy gameport support"
-	depends on PCI
+	depends on LEGACY_PCI
 	help
 	  Say Y here if you have a SoundBlaster Live! or SoundBlaster
 	  Audigy card and want to use its gameport.
@@ -53,7 +53,7 @@  config GAMEPORT_EMU10K1
 
 config GAMEPORT_FM801
 	tristate "ForteMedia FM801 gameport support"
-	depends on PCI
+	depends on LEGACY_PCI
 	help
 	  Say Y here if you have ForteMedia FM801 PCI audio controller
 	  (Abit AU10, Genius Sound Maker, HP Workstation zx2000,
diff --git a/drivers/isdn/hardware/mISDN/Kconfig b/drivers/isdn/hardware/mISDN/Kconfig
index 078eeadf707a..2c5e16483179 100644
--- a/drivers/isdn/hardware/mISDN/Kconfig
+++ b/drivers/isdn/hardware/mISDN/Kconfig
@@ -7,14 +7,14 @@  comment "mISDN hardware drivers"
 config MISDN_HFCPCI
 	tristate "Support for HFC PCI cards"
 	depends on MISDN
-	depends on PCI
+	depends on LEGACY_PCI
 	help
 	  Enable support for cards with Cologne Chip AG's
 	  HFC PCI chip.
 
 config MISDN_HFCMULTI
 	tristate "Support for HFC multiport cards (HFC-4S/8S/E1)"
-	depends on PCI || CPM1
+	depends on LEGACY_PCI || CPM1
 	depends on MISDN
 	help
 	  Enable support for cards with Cologne Chip AG's HFC multiport
@@ -43,7 +43,7 @@  config MISDN_HFCUSB
 config MISDN_AVMFRITZ
 	tristate "Support for AVM FRITZ!CARD PCI"
 	depends on MISDN
-	depends on PCI
+	depends on LEGACY_PCI
 	select MISDN_IPAC
 	help
 	  Enable support for AVMs FRITZ!CARD PCI cards
@@ -51,7 +51,7 @@  config MISDN_AVMFRITZ
 config MISDN_SPEEDFAX
 	tristate "Support for Sedlbauer Speedfax+"
 	depends on MISDN
-	depends on PCI
+	depends on LEGACY_PCI
 	select MISDN_IPAC
 	select MISDN_ISAR
 	help
@@ -60,7 +60,7 @@  config MISDN_SPEEDFAX
 config MISDN_INFINEON
 	tristate "Support for cards with Infineon chipset"
 	depends on MISDN
-	depends on PCI
+	depends on LEGACY_PCI
 	select MISDN_IPAC
 	help
 	  Enable support for cards with ISAC + HSCX, IPAC or IPAC-SX
@@ -69,14 +69,14 @@  config MISDN_INFINEON
 config MISDN_W6692
 	tristate "Support for cards with Winbond 6692"
 	depends on MISDN
-	depends on PCI
+	depends on LEGACY_PCI
 	help
 	  Enable support for Winbond 6692 PCI chip based cards.
 
 config MISDN_NETJET
 	tristate "Support for NETJet cards"
 	depends on MISDN
-	depends on PCI
+	depends on LEGACY_PCI
 	depends on TTY
 	select MISDN_IPAC
 	select MISDN_HDLC
diff --git a/drivers/media/cec/platform/Kconfig b/drivers/media/cec/platform/Kconfig
index b672d3142eb7..5e92ece5b104 100644
--- a/drivers/media/cec/platform/Kconfig
+++ b/drivers/media/cec/platform/Kconfig
@@ -100,7 +100,7 @@  config CEC_TEGRA
 config CEC_SECO
 	tristate "SECO Boards HDMI CEC driver"
 	depends on (X86 || IA64) || COMPILE_TEST
-	depends on PCI && DMI
+	depends on LEGACY_PCI && DMI
 	select CEC_CORE
 	select CEC_NOTIFIER
 	help
diff --git a/drivers/media/pci/dm1105/Kconfig b/drivers/media/pci/dm1105/Kconfig
index e0e3af67c99c..9ecab93685d4 100644
--- a/drivers/media/pci/dm1105/Kconfig
+++ b/drivers/media/pci/dm1105/Kconfig
@@ -1,7 +1,7 @@ 
 # SPDX-License-Identifier: GPL-2.0-only
 config DVB_DM1105
 	tristate "SDMC DM1105 based PCI cards"
-	depends on DVB_CORE && PCI && I2C && I2C_ALGOBIT
+	depends on DVB_CORE && LEGACY_PCI && I2C && I2C_ALGOBIT
 	select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT
 	select DVB_STV0299 if MEDIA_SUBDRV_AUTOSELECT
 	select DVB_STV0288 if MEDIA_SUBDRV_AUTOSELECT
diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig
index d29e29645e04..32eb73993998 100644
--- a/drivers/media/radio/Kconfig
+++ b/drivers/media/radio/Kconfig
@@ -67,7 +67,7 @@  config USB_DSBR
 
 config RADIO_MAXIRADIO
 	tristate "Guillemot MAXI Radio FM 2000 radio"
-	depends on VIDEO_V4L2 && PCI
+	depends on VIDEO_V4L2 && LEGACY_PCI
 	select RADIO_TEA575X
 	help
 	  Choose Y here if you have this radio card.  This card may also be
diff --git a/drivers/message/fusion/Kconfig b/drivers/message/fusion/Kconfig
index a3d0288fd0e2..cec5995e1911 100644
--- a/drivers/message/fusion/Kconfig
+++ b/drivers/message/fusion/Kconfig
@@ -2,7 +2,7 @@ 
 
 menuconfig FUSION
 	bool "Fusion MPT device support"
-	depends on PCI
+	depends on LEGACY_PCI
 	help
 	Say Y here to get to see options for Fusion Message
 	Passing Technology (MPT) drivers.
@@ -14,7 +14,7 @@  if FUSION
 
 config FUSION_SPI
 	tristate "Fusion MPT ScsiHost drivers for SPI"
-	depends on PCI && SCSI
+	depends on LEGACY_PCI && SCSI
 	select SCSI_SPI_ATTRS
 	help
 	  SCSI HOST support for a parallel SCSI host adapters.
@@ -29,7 +29,7 @@  config FUSION_SPI
 
 config FUSION_FC
 	tristate "Fusion MPT ScsiHost drivers for FC"
-	depends on PCI && SCSI
+	depends on LEGACY_PCI && SCSI
 	depends on SCSI_FC_ATTRS
 	help
 	  SCSI HOST support for a Fiber Channel host adapters.
@@ -48,7 +48,7 @@  config FUSION_FC
 
 config FUSION_SAS
 	tristate "Fusion MPT ScsiHost drivers for SAS"
-	depends on PCI && SCSI
+	depends on LEGACY_PCI && SCSI
 	select SCSI_SAS_ATTRS
 	help
 	  SCSI HOST support for a SAS host adapters.
diff --git a/drivers/net/arcnet/Kconfig b/drivers/net/arcnet/Kconfig
index a51b9dab6d3a..b8038287c4f2 100644
--- a/drivers/net/arcnet/Kconfig
+++ b/drivers/net/arcnet/Kconfig
@@ -4,7 +4,7 @@ 
 #
 
 menuconfig ARCNET
-	depends on NETDEVICES && (ISA || PCI || PCMCIA)
+	depends on NETDEVICES && (ISA || LEGACY_PCI || PCMCIA)
 	tristate "ARCnet support"
 	help
 	  If you have a network card of this type, say Y and check out the
diff --git a/drivers/net/ethernet/8390/Kconfig b/drivers/net/ethernet/8390/Kconfig
index a4130e643342..0fa43943ea74 100644
--- a/drivers/net/ethernet/8390/Kconfig
+++ b/drivers/net/ethernet/8390/Kconfig
@@ -117,7 +117,7 @@  config NE2000
 
 config NE2K_PCI
 	tristate "PCI NE2000 and clones support (see help)"
-	depends on PCI
+	depends on LEGACY_PCI
 	select CRC32
 	help
 	  This driver is for NE2000 compatible PCI cards. It will not work
diff --git a/drivers/net/ethernet/amd/Kconfig b/drivers/net/ethernet/amd/Kconfig
index 899c8a2a34b6..0ac61a5f1a37 100644
--- a/drivers/net/ethernet/amd/Kconfig
+++ b/drivers/net/ethernet/amd/Kconfig
@@ -56,7 +56,7 @@  config LANCE
 
 config PCNET32
 	tristate "AMD PCnet32 PCI support"
-	depends on PCI
+	depends on LEGACY_PCI
 	select CRC32
 	select MII
 	help
diff --git a/drivers/net/ethernet/intel/Kconfig b/drivers/net/ethernet/intel/Kconfig
index 0b274d8fa45b..45a3c42945fc 100644
--- a/drivers/net/ethernet/intel/Kconfig
+++ b/drivers/net/ethernet/intel/Kconfig
@@ -18,7 +18,7 @@  if NET_VENDOR_INTEL
 
 config E100
 	tristate "Intel(R) PRO/100+ support"
-	depends on PCI
+	depends on LEGACY_PCI
 	select MII
 	help
 	  This driver supports Intel(R) PRO/100 family of adapters.
@@ -41,7 +41,7 @@  config E100
 
 config E1000
 	tristate "Intel(R) PRO/1000 Gigabit Ethernet support"
-	depends on PCI
+	depends on LEGACY_PCI
 	help
 	  This driver supports Intel(R) PRO/1000 gigabit ethernet family of
 	  adapters.  For more information on how to identify your adapter, go
diff --git a/drivers/net/ethernet/sis/Kconfig b/drivers/net/ethernet/sis/Kconfig
index 775d76d9890e..bd1b1b81b0e8 100644
--- a/drivers/net/ethernet/sis/Kconfig
+++ b/drivers/net/ethernet/sis/Kconfig
@@ -6,7 +6,7 @@ 
 config NET_VENDOR_SIS
 	bool "Silicon Integrated Systems (SiS) devices"
 	default y
-	depends on PCI
+	depends on LEGACY_PCI
 	help
 	  If you have a network (Ethernet) card belonging to this class, say Y.
 
@@ -19,7 +19,7 @@  if NET_VENDOR_SIS
 
 config SIS900
 	tristate "SiS 900/7016 PCI Fast Ethernet Adapter support"
-	depends on PCI
+	depends on LEGACY_PCI
 	select CRC32
 	select MII
 	help
@@ -35,7 +35,7 @@  config SIS900
 
 config SIS190
 	tristate "SiS190/SiS191 gigabit ethernet support"
-	depends on PCI
+	depends on LEGACY_PCI
 	select CRC32
 	select MII
 	help
diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig
index affcf92cd3aa..8b1d67b00e68 100644
--- a/drivers/net/ethernet/ti/Kconfig
+++ b/drivers/net/ethernet/ti/Kconfig
@@ -6,7 +6,7 @@ 
 config NET_VENDOR_TI
 	bool "Texas Instruments (TI) devices"
 	default y
-	depends on PCI || EISA || AR7 || ARCH_DAVINCI || ARCH_OMAP2PLUS || ARCH_KEYSTONE || ARCH_K3
+	depends on LEGACY_PCI || EISA || AR7 || ARCH_DAVINCI || ARCH_OMAP2PLUS || ARCH_KEYSTONE || ARCH_K3
 	help
 	  If you have a network (Ethernet) card belonging to this class, say Y.
 
@@ -159,7 +159,7 @@  config TI_KEYSTONE_NETCP_ETHSS
 
 config TLAN
 	tristate "TI ThunderLAN support"
-	depends on (PCI || EISA)
+	depends on (LEGACY_PCI || EISA)
 	help
 	  If you have a PCI Ethernet network card based on the ThunderLAN chip
 	  which is supported by this driver, say Y here.
diff --git a/drivers/net/ethernet/via/Kconfig b/drivers/net/ethernet/via/Kconfig
index da287ef65be7..0ca7d8f7bfde 100644
--- a/drivers/net/ethernet/via/Kconfig
+++ b/drivers/net/ethernet/via/Kconfig
@@ -18,8 +18,8 @@  if NET_VENDOR_VIA
 
 config VIA_RHINE
 	tristate "VIA Rhine support"
-	depends on PCI || (OF_IRQ && GENERIC_PCI_IOMAP)
-	depends on PCI || ARCH_VT8500 || COMPILE_TEST
+	depends on LEGACY_PCI || (OF_IRQ && GENERIC_PCI_IOMAP)
+	depends on LEGACY_PCI || ARCH_VT8500 || COMPILE_TEST
 	depends on HAS_DMA
 	select CRC32
 	select MII
diff --git a/drivers/net/fddi/Kconfig b/drivers/net/fddi/Kconfig
index 846bf41c2717..1753c08d6423 100644
--- a/drivers/net/fddi/Kconfig
+++ b/drivers/net/fddi/Kconfig
@@ -5,7 +5,7 @@ 
 
 config FDDI
 	tristate "FDDI driver support"
-	depends on PCI || EISA || TC
+	depends on LEGACY_PCI || EISA || TC
 	help
 	  Fiber Distributed Data Interface is a high speed local area network
 	  design; essentially a replacement for high speed Ethernet. FDDI can
@@ -29,7 +29,7 @@  config DEFZA
 
 config DEFXX
 	tristate "Digital DEFTA/DEFEA/DEFPA adapter support"
-	depends on FDDI && (PCI || EISA || TC)
+	depends on FDDI && (LEGACY_PCI || EISA || TC)
 	help
 	  This is support for the DIGITAL series of TURBOchannel (DEFTA),
 	  EISA (DEFEA) and PCI (DEFPA) controllers which can connect you
diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
index 592a8389fc5a..631c4c1c56c8 100644
--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
@@ -250,7 +250,7 @@  config C101
 
 config FARSYNC
 	tristate "FarSync T-Series support"
-	depends on HDLC && PCI
+	depends on HDLC && LEGACY_PCI
 	help
 	  Support for the FarSync T-Series X.21 (and V.35/V.24) cards by
 	  FarSite Communications Ltd.
diff --git a/drivers/net/wireless/atmel/Kconfig b/drivers/net/wireless/atmel/Kconfig
index ca45a1021cf4..9baa4a19dd38 100644
--- a/drivers/net/wireless/atmel/Kconfig
+++ b/drivers/net/wireless/atmel/Kconfig
@@ -14,7 +14,7 @@  if WLAN_VENDOR_ATMEL
 
 config ATMEL
 	tristate "Atmel at76c50x chipset  802.11b support"
-	depends on CFG80211 && (PCI || PCMCIA)
+	depends on CFG80211 && (LEGACY_PCI || PCMCIA)
 	select WIRELESS_EXT
 	select WEXT_PRIV
 	select FW_LOADER
@@ -32,7 +32,7 @@  config ATMEL
 
 config PCI_ATMEL
 	tristate "Atmel at76c506 PCI cards"
-	depends on ATMEL && PCI
+	depends on ATMEL && LEGACY_PCI
 	help
 	  Enable support for PCI and mini-PCI cards containing the
 	  Atmel at76c506 chip.
diff --git a/drivers/net/wireless/intersil/hostap/Kconfig b/drivers/net/wireless/intersil/hostap/Kconfig
index c865d3156cea..9bcd1c8546ff 100644
--- a/drivers/net/wireless/intersil/hostap/Kconfig
+++ b/drivers/net/wireless/intersil/hostap/Kconfig
@@ -56,7 +56,7 @@  config HOSTAP_FIRMWARE_NVRAM
 
 config HOSTAP_PLX
 	tristate "Host AP driver for Prism2/2.5/3 in PLX9052 PCI adaptors"
-	depends on PCI && HOSTAP
+	depends on LEGACY_PCI && HOSTAP
 	help
 	Host AP driver's version for Prism2/2.5/3 PC Cards in PLX9052 based
 	PCI adaptors.
@@ -70,7 +70,7 @@  config HOSTAP_PLX
 
 config HOSTAP_PCI
 	tristate "Host AP driver for Prism2.5 PCI adaptors"
-	depends on PCI && HOSTAP
+	depends on LEGACY_PCI && HOSTAP
 	help
 	Host AP driver's version for Prism2.5 PCI adaptors.
 
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index 43e615aa12ff..e0c99ddc145c 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -23,6 +23,17 @@  menuconfig PCI
 
 if PCI
 
+config LEGACY_PCI
+	bool "Enable support for legacy PCI devices"
+	depends on HAVE_PCI
+	help
+	   This option enables support for legacy PCI devices. This includes
+	   PCI devices attached directly or via a bridge on a PCI Express bus.
+	   It also includes compatibility features on PCI Express devices which
+	   make use of legacy I/O spaces.
+
+	   For maximum compatibility with old hardware say 'Y'
+
 config PCI_DOMAINS
 	bool
 	depends on PCI
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 6e3a04107bb6..5436b2be2c73 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -333,7 +333,7 @@  config SGIWD93_SCSI
 
 config BLK_DEV_3W_XXXX_RAID
 	tristate "3ware 5/6/7/8xxx ATA-RAID support"
-	depends on PCI && SCSI
+	depends on LEGACY_PCI && SCSI
 	help
 	  3ware is the only hardware ATA-Raid product in Linux to date.
 	  This card is 2,4, or 8 channel master mode support only.
@@ -380,7 +380,7 @@  config SCSI_3W_SAS
 
 config SCSI_ACARD
 	tristate "ACARD SCSI support"
-	depends on PCI && SCSI
+	depends on LEGACY_PCI && SCSI
 	help
 	  This driver supports the ACARD SCSI host adapter.
 	  Support Chip <ATP870 ATP876 ATP880 ATP885>
@@ -472,7 +472,7 @@  config SCSI_DPT_I2O
 config SCSI_ADVANSYS
 	tristate "AdvanSys SCSI support"
 	depends on SCSI
-	depends on ISA || EISA || PCI
+	depends on ISA || EISA || LEGACY_PCI
 	depends on ISA_DMA_API || !ISA
 	help
 	  This is a driver for all SCSI host adapters manufactured by
@@ -643,7 +643,7 @@  config SCSI_SNIC_DEBUG_FS
 
 config SCSI_DMX3191D
 	tristate "DMX3191D SCSI support"
-	depends on PCI && SCSI
+	depends on LEGACY_PCI && SCSI
 	select SCSI_SPI_ATTRS
 	help
 	  This is support for Domex DMX3191D SCSI Host Adapters.
@@ -657,7 +657,7 @@  config SCSI_FDOMAIN
 
 config SCSI_FDOMAIN_PCI
 	tristate "Future Domain TMC-3260/AHA-2920A PCI SCSI support"
-	depends on PCI && SCSI
+	depends on LEGACY_PCI && SCSI
 	select SCSI_FDOMAIN
 	help
 	  This is support for Future Domain's PCI SCSI host adapters (TMC-3260)
@@ -710,7 +710,7 @@  config SCSI_GENERIC_NCR5380
 
 config SCSI_IPS
 	tristate "IBM ServeRAID support"
-	depends on PCI && SCSI
+	depends on LEGACY_PCI && SCSI
 	help
 	  This is support for the IBM ServeRAID hardware RAID controllers.
 	  See <http://www.developer.ibm.com/welcome/netfinity/serveraid.html>
@@ -770,7 +770,7 @@  config SCSI_IBMVFC_TRACE
 
 config SCSI_INITIO
 	tristate "Initio 9100U(W) support"
-	depends on PCI && SCSI
+	depends on LEGACY_PCI && SCSI
 	help
 	  This is support for the Initio 91XXU(W) SCSI host adapter.  Please
 	  read the SCSI-HOWTO, available from
@@ -781,7 +781,7 @@  config SCSI_INITIO
 
 config SCSI_INIA100
 	tristate "Initio INI-A100U2W support"
-	depends on PCI && SCSI
+	depends on LEGACY_PCI && SCSI
 	help
 	  This is support for the Initio INI-A100U2W SCSI host adapter.
 	  Please read the SCSI-HOWTO, available from
@@ -1130,7 +1130,7 @@  config SCSI_QLOGIC_FAS
 
 config SCSI_QLOGIC_1280
 	tristate "Qlogic QLA 1240/1x80/1x160 SCSI support"
-	depends on PCI && SCSI
+	depends on LEGACY_PCI && SCSI
 	help
 	  Say Y if you have a QLogic ISP1240/1x80/1x160 SCSI host adapter.
 
@@ -1187,7 +1187,7 @@  config SCSI_SIM710
 
 config SCSI_DC395x
 	tristate "Tekram DC395(U/UW/F) and DC315(U) SCSI support"
-	depends on PCI && SCSI
+	depends on LEGACY_PCI && SCSI
 	select SCSI_SPI_ATTRS
 	help
 	  This driver supports PCI SCSI host adapters based on the ASIC
diff --git a/drivers/scsi/aic7xxx/Kconfig.aic79xx b/drivers/scsi/aic7xxx/Kconfig.aic79xx
index a47dbd500e9a..64332cc73ea0 100644
--- a/drivers/scsi/aic7xxx/Kconfig.aic79xx
+++ b/drivers/scsi/aic7xxx/Kconfig.aic79xx
@@ -5,7 +5,7 @@ 
 #
 config SCSI_AIC79XX
 	tristate "Adaptec AIC79xx U320 support"
-	depends on PCI && SCSI
+	depends on LEGACY_PCI && SCSI
 	select SCSI_SPI_ATTRS
 	help
 	This driver supports all of Adaptec's Ultra 320 PCI-X
diff --git a/drivers/scsi/aic7xxx/Kconfig.aic7xxx b/drivers/scsi/aic7xxx/Kconfig.aic7xxx
index 0cfd92ce750a..3fa5dc1d1186 100644
--- a/drivers/scsi/aic7xxx/Kconfig.aic7xxx
+++ b/drivers/scsi/aic7xxx/Kconfig.aic7xxx
@@ -5,7 +5,7 @@ 
 #
 config SCSI_AIC7XXX
 	tristate "Adaptec AIC7xxx Fast -> U160 support"
-	depends on (PCI || EISA) && SCSI
+	depends on (LEGACY_PCI || EISA) && SCSI
 	select SCSI_SPI_ATTRS
 	help
 	This driver supports all of Adaptec's Fast through Ultra 160 PCI
diff --git a/drivers/scsi/aic94xx/Kconfig b/drivers/scsi/aic94xx/Kconfig
index 71931c371b1c..b0cbf65dbe5b 100644
--- a/drivers/scsi/aic94xx/Kconfig
+++ b/drivers/scsi/aic94xx/Kconfig
@@ -8,7 +8,7 @@ 
 
 config SCSI_AIC94XX
 	tristate "Adaptec AIC94xx SAS/SATA support"
-	depends on PCI
+	depends on LEGACY_PCI
 	select SCSI_SAS_LIBSAS
 	select FW_LOADER
 	help
diff --git a/drivers/scsi/megaraid/Kconfig.megaraid b/drivers/scsi/megaraid/Kconfig.megaraid
index 2adc2afd9f91..4ec46aede490 100644
--- a/drivers/scsi/megaraid/Kconfig.megaraid
+++ b/drivers/scsi/megaraid/Kconfig.megaraid
@@ -67,7 +67,7 @@  config MEGARAID_MAILBOX
 
 config MEGARAID_LEGACY
 	tristate "LSI Logic Legacy MegaRAID Driver"
-	depends on PCI && SCSI
+	depends on LEGACY_PCI && SCSI
 	help
 	This driver supports the LSI MegaRAID 418, 428, 438, 466, 762, 490
 	and 467 SCSI host adapters. This driver also support the all U320
diff --git a/drivers/scsi/mvsas/Kconfig b/drivers/scsi/mvsas/Kconfig
index 79812b80743b..f41f3f4a9f34 100644
--- a/drivers/scsi/mvsas/Kconfig
+++ b/drivers/scsi/mvsas/Kconfig
@@ -9,7 +9,7 @@ 
 
 config SCSI_MVSAS
 	tristate "Marvell 88SE64XX/88SE94XX SAS/SATA support"
-	depends on PCI
+	depends on LEGACY_PCI
 	select SCSI_SAS_LIBSAS
 	select FW_LOADER
 	help
diff --git a/drivers/scsi/qla2xxx/Kconfig b/drivers/scsi/qla2xxx/Kconfig
index 802c373fd6d9..93afb73858ce 100644
--- a/drivers/scsi/qla2xxx/Kconfig
+++ b/drivers/scsi/qla2xxx/Kconfig
@@ -1,7 +1,7 @@ 
 # SPDX-License-Identifier: GPL-2.0-only
 config SCSI_QLA_FC
 	tristate "QLogic QLA2XXX Fibre Channel Support"
-	depends on PCI && SCSI
+	depends on LEGACY_PCI && SCSI
 	depends on SCSI_FC_ATTRS
 	depends on NVME_FC || !NVME_FC
 	select FW_LOADER
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 596705d24400..cfbd45767095 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -204,6 +204,7 @@  config SPI_BITBANG
 config SPI_BUTTERFLY
 	tristate "Parallel port adapter for AVR Butterfly (DEVELOPMENT)"
 	depends on PARPORT
+	depends on HAS_IOPORT
 	select SPI_BITBANG
 	help
 	  This uses a custom parallel port cable to connect to an AVR
diff --git a/drivers/staging/sm750fb/Kconfig b/drivers/staging/sm750fb/Kconfig
index 8c0d8a873d5b..d332f912b964 100644
--- a/drivers/staging/sm750fb/Kconfig
+++ b/drivers/staging/sm750fb/Kconfig
@@ -1,7 +1,7 @@ 
 # SPDX-License-Identifier: GPL-2.0
 config FB_SM750
 	tristate "Silicon Motion SM750 framebuffer support"
-	depends on FB && PCI
+	depends on FB && LEGACY_PCI
 	select FB_MODE_HELPERS
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
diff --git a/drivers/staging/vt6655/Kconfig b/drivers/staging/vt6655/Kconfig
index d1cd5de46dcf..dd236f54d3a2 100644
--- a/drivers/staging/vt6655/Kconfig
+++ b/drivers/staging/vt6655/Kconfig
@@ -1,6 +1,6 @@ 
 # SPDX-License-Identifier: GPL-2.0
 config VT6655
    tristate "VIA Technologies VT6655 support"
-   depends on PCI && MAC80211 && m
+   depends on LEGACY_PCI && MAC80211 && m
    help
      This is a vendor-written driver for VIA VT6655.
diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig
index cc30ff93e2e4..460326a529d6 100644
--- a/drivers/tty/Kconfig
+++ b/drivers/tty/Kconfig
@@ -203,7 +203,7 @@  config MOXA_INTELLIO
 
 config MOXA_SMARTIO
 	tristate "Moxa SmartIO support v. 2.0"
-	depends on SERIAL_NONSTANDARD && PCI
+	depends on SERIAL_NONSTANDARD && LEGACY_PCI
 	help
 	  Say Y here if you have a Moxa SmartIO multiport serial card and/or
 	  want to help develop a new version of this driver.
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index fc543ac97c13..607791b7f693 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -908,7 +908,7 @@  config SERIAL_VR41XX_CONSOLE
 
 config SERIAL_JSM
 	tristate "Digi International NEO and Classic PCI Support"
-	depends on PCI
+	depends on LEGACY_PCI
 	select SERIAL_CORE
 	help
 	  This is a driver for Digi International's Neo and Classic series
diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
index 6ed5e608dd04..a3446d44c118 100644
--- a/drivers/video/fbdev/Kconfig
+++ b/drivers/video/fbdev/Kconfig
@@ -343,7 +343,7 @@  config FB_IMX
 
 config FB_CYBER2000
 	tristate "CyberPro 2000/2010/5000 support"
-	depends on FB && PCI && (BROKEN || !SPARC64)
+	depends on FB && LEGACY_PCI && (BROKEN || !SPARC64)
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
@@ -1264,7 +1264,7 @@  config FB_ATY128_BACKLIGHT
 	  Say Y here if you want to control the backlight of your display.
 
 config FB_ATY
-	tristate "ATI Mach64 display support" if PCI || ATARI
+	tristate "ATI Mach64 display support" if LEGACY_PCI || ATARI
 	depends on FB && !SPARC32
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
@@ -1315,7 +1315,7 @@  config FB_ATY_BACKLIGHT
 
 config FB_S3
 	tristate "S3 Trio/Virge support"
-	depends on FB && PCI
+	depends on FB && LEGACY_PCI
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
@@ -1374,7 +1374,7 @@  config FB_SAVAGE_ACCEL
 
 config FB_SIS
 	tristate "SiS/XGI display support"
-	depends on FB && PCI
+	depends on FB && LEGACY_PCI
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
@@ -1404,7 +1404,7 @@  config FB_SIS_315
 
 config FB_VIA
 	tristate "VIA UniChrome (Pro) and Chrome9 display support"
-	depends on FB && PCI && GPIOLIB && I2C && (X86 || COMPILE_TEST)
+	depends on FB && LEGACY_PCI && GPIOLIB && I2C && (X86 || COMPILE_TEST)
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
@@ -1442,7 +1442,7 @@  endif
 
 config FB_NEOMAGIC
 	tristate "NeoMagic display support"
-	depends on FB && PCI
+	depends on FB && LEGACY_PCI
 	select FB_MODE_HELPERS
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
@@ -1470,7 +1470,7 @@  config FB_KYRO
 
 config FB_3DFX
 	tristate "3Dfx Banshee/Voodoo3/Voodoo5 display support"
-	depends on FB && PCI
+	depends on FB && LEGACY_PCI
 	select FB_CFB_IMAGEBLIT
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
@@ -1518,7 +1518,7 @@  config FB_VOODOO1
 
 config FB_VT8623
 	tristate "VIA VT8623 support"
-	depends on FB && PCI
+	depends on FB && LEGACY_PCI
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
@@ -1532,7 +1532,7 @@  config FB_VT8623
 
 config FB_TRIDENT
 	tristate "Trident/CyberXXX/CyberBlade support"
-	depends on FB && PCI
+	depends on FB && LEGACY_PCI
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
@@ -1554,7 +1554,7 @@  config FB_TRIDENT
 
 config FB_ARK
 	tristate "ARK 2000PV support"
-	depends on FB && PCI
+	depends on FB && LEGACY_PCI
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
@@ -2226,7 +2226,7 @@  config FB_SSD1307
 
 config FB_SM712
 	tristate "Silicon Motion SM712 framebuffer support"
-	depends on FB && PCI
+	depends on FB && LEGACY_PCI
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 9d222ba17ec6..05258109bcc2 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -2053,7 +2053,7 @@  comment "PCI-based Watchdog Cards"
 
 config PCIPCWATCHDOG
 	tristate "Berkshire Products PCI-PC Watchdog"
-	depends on PCI
+	depends on LEGACY_PCI
 	help
 	  This is the driver for the Berkshire Products PCI-PC Watchdog card.
 	  This card simply watches your kernel to make sure it doesn't freeze,
@@ -2068,7 +2068,7 @@  config PCIPCWATCHDOG
 
 config WDTPCI
 	tristate "PCI-WDT500/501 Watchdog timer"
-	depends on PCI
+	depends on LEGACY_PCI
 	help
 	  If you have a PCI-WDT500/501 watchdog board, say Y here, otherwise N.
 
diff --git a/sound/pci/Kconfig b/sound/pci/Kconfig
index 41ce12597177..07d9587eede4 100644
--- a/sound/pci/Kconfig
+++ b/sound/pci/Kconfig
@@ -23,10 +23,10 @@  config SND_AD1889
 
 config SND_ALS300
 	tristate "Avance Logic ALS300/ALS300+"
+	depends on LEGACY_PCI && ZONE_DMA
 	select SND_PCM
 	select SND_AC97_CODEC
 	select SND_OPL3_LIB
-	depends on ZONE_DMA
 	help
 	  Say 'Y' or 'M' to include support for Avance Logic ALS300/ALS300+
 
@@ -35,6 +35,7 @@  config SND_ALS300
 
 config SND_ALS4000
 	tristate "Avance Logic ALS4000"
+	depends on LEGACY_PCI
 	depends on ISA_DMA_API
 	select SND_OPL3_LIB
 	select SND_MPU401_UART
@@ -49,6 +50,7 @@  config SND_ALS4000
 
 config SND_ALI5451
 	tristate "ALi M5451 PCI Audio Controller"
+	depends on LEGACY_PCI
 	select SND_MPU401_UART
 	select SND_AC97_CODEC
 	depends on ZONE_DMA
@@ -96,6 +98,7 @@  config SND_ATIIXP_MODEM
 
 config SND_AU8810
 	tristate "Aureal Advantage"
+	depends on LEGACY_PCI
 	select SND_MPU401_UART
 	select SND_AC97_CODEC
 	help
@@ -110,6 +113,7 @@  config SND_AU8810
 
 config SND_AU8820
 	tristate "Aureal Vortex"
+	depends on LEGACY_PCI
 	select SND_MPU401_UART
 	select SND_AC97_CODEC
 	help
@@ -123,6 +127,7 @@  config SND_AU8820
 
 config SND_AU8830
 	tristate "Aureal Vortex 2"
+	depends on LEGACY_PCI
 	select SND_MPU401_UART
 	select SND_AC97_CODEC
 	help
@@ -151,13 +156,13 @@  config SND_AW2
 
 config SND_AZT3328
 	tristate "Aztech AZF3328 / PCI168"
+	depends on LEGACY_PCI && ZONE_DMA
 	select SND_OPL3_LIB
 	select SND_MPU401_UART
 	select SND_PCM
 	select SND_RAWMIDI
 	select SND_AC97_CODEC
 	select SND_TIMER
-	depends on ZONE_DMA
 	help
 	  Say Y here to include support for Aztech AZF3328 (PCI168)
 	  soundcards.
@@ -172,6 +177,7 @@  config SND_AZT3328
 
 config SND_BT87X
 	tristate "Bt87x Audio Capture"
+	depends on LEGACY_PCI
 	select SND_PCM
 	help
 	  If you want to record audio from TV cards based on
@@ -193,6 +199,7 @@  config SND_BT87X_OVERCLOCK
 
 config SND_CA0106
 	tristate "SB Audigy LS / Live 24bit"
+	depends on LEGACY_PCI
 	select SND_AC97_CODEC
 	select SND_RAWMIDI
 	select SND_VMASTER
@@ -205,6 +212,7 @@  config SND_CA0106
 
 config SND_CMIPCI
 	tristate "C-Media 8338, 8738, 8768, 8770"
+	depends on LEGACY_PCI
 	select SND_OPL3_LIB
 	select SND_MPU401_UART
 	select SND_PCM
@@ -221,6 +229,7 @@  config SND_OXYGEN_LIB
 
 config SND_OXYGEN
 	tristate "C-Media 8786, 8787, 8788 (Oxygen)"
+	depends on LEGACY_PCI
 	select SND_OXYGEN_LIB
 	select SND_PCM
 	select SND_MPU401_UART
@@ -246,6 +255,7 @@  config SND_OXYGEN
 
 config SND_CS4281
 	tristate "Cirrus Logic (Sound Fusion) CS4281"
+	depends on LEGACY_PCI
 	select SND_OPL3_LIB
 	select SND_RAWMIDI
 	select SND_AC97_CODEC
@@ -257,6 +267,7 @@  config SND_CS4281
 
 config SND_CS46XX
 	tristate "Cirrus Logic (Sound Fusion) CS4280/CS461x/CS462x/CS463x"
+	depends on LEGACY_PCI
 	select SND_RAWMIDI
 	select SND_AC97_CODEC
 	select FW_LOADER
@@ -290,6 +301,7 @@  config SND_CS5530
 config SND_CS5535AUDIO
 	tristate "CS5535/CS5536 Audio"
 	depends on X86_32 || MIPS || COMPILE_TEST
+	depends on LEGACY_PCI
 	select SND_PCM
 	select SND_AC97_CODEC
 	help
@@ -307,6 +319,7 @@  config SND_CS5535AUDIO
 
 config SND_CTXFI
 	tristate "Creative Sound Blaster X-Fi"
+	depends on LEGACY_PCI
 	select SND_PCM
 	help
 	  If you want to use soundcards based on Creative Sound Blastr X-Fi
@@ -462,13 +475,13 @@  config SND_INDIGODJX
 
 config SND_EMU10K1
 	tristate "Emu10k1 (SB Live!, Audigy, E-mu APS)"
+	depends on LEGACY_PCI && ZONE_DMA
 	select FW_LOADER
 	select SND_HWDEP
 	select SND_RAWMIDI
 	select SND_AC97_CODEC
 	select SND_TIMER
 	select SND_SEQ_DEVICE if SND_SEQUENCER != n
-	depends on ZONE_DMA
 	help
 	  Say Y to include support for Sound Blaster PCI 512, Live!,
 	  Audigy and E-mu APS (partially supported) soundcards.
@@ -489,6 +502,7 @@  config SND_EMU10K1_SEQ
 
 config SND_EMU10K1X
 	tristate "Emu10k1X (Dell OEM Version)"
+	depends on LEGACY_PCI
 	select SND_AC97_CODEC
 	select SND_RAWMIDI
 	depends on ZONE_DMA
@@ -501,6 +515,7 @@  config SND_EMU10K1X
 
 config SND_ENS1370
 	tristate "(Creative) Ensoniq AudioPCI 1370"
+	depends on LEGACY_PCI
 	select SND_RAWMIDI
 	select SND_PCM
 	help
@@ -511,6 +526,7 @@  config SND_ENS1370
 
 config SND_ENS1371
 	tristate "(Creative) Ensoniq AudioPCI 1371/1373"
+	depends on LEGACY_PCI
 	select SND_RAWMIDI
 	select SND_AC97_CODEC
 	help
@@ -522,10 +538,10 @@  config SND_ENS1371
 
 config SND_ES1938
 	tristate "ESS ES1938/1946/1969 (Solo-1)"
+	depends on LEGACY_PCI && ZONE_DMA
 	select SND_OPL3_LIB
 	select SND_MPU401_UART
 	select SND_AC97_CODEC
-	depends on ZONE_DMA
 	help
 	  Say Y here to include support for soundcards based on ESS Solo-1
 	  (ES1938, ES1946, ES1969) chips.
@@ -535,9 +551,9 @@  config SND_ES1938
 
 config SND_ES1968
 	tristate "ESS ES1968/1978 (Maestro-1/2/2E)"
+	depends on LEGACY_PCI && ZONE_DMA
 	select SND_MPU401_UART
 	select SND_AC97_CODEC
-	depends on ZONE_DMA
 	help
 	  Say Y here to include support for soundcards based on ESS Maestro
 	  1/2/2E chips.
@@ -569,6 +585,7 @@  config SND_ES1968_RADIO
 
 config SND_FM801
 	tristate "ForteMedia FM801"
+	depends on LEGACY_PCI
 	select SND_OPL3_LIB
 	select SND_MPU401_UART
 	select SND_AC97_CODEC
@@ -621,10 +638,10 @@  config SND_HDSPM
 
 config SND_ICE1712
 	tristate "ICEnsemble ICE1712 (Envy24)"
+	depends on LEGACY_PCI && ZONE_DMA
 	select SND_MPU401_UART
 	select SND_AC97_CODEC
 	select BITREVERSE
-	depends on ZONE_DMA
 	help
 	  Say Y here to include support for soundcards based on the
 	  ICE1712 (Envy24) chip.
@@ -640,6 +657,7 @@  config SND_ICE1712
 
 config SND_ICE1724
 	tristate "ICE/VT1724/1720 (Envy24HT/PT)"
+	depends on LEGACY_PCI && ZONE_DMA
 	select SND_RAWMIDI
 	select SND_AC97_CODEC
 	select SND_VMASTER
@@ -712,6 +730,7 @@  config SND_LX6464ES
 config SND_MAESTRO3
 	tristate "ESS Allegro/Maestro3"
 	select SND_AC97_CODEC
+	depends on LEGACY_PCI
 	depends on ZONE_DMA
 	help
 	  Say Y here to include support for soundcards based on ESS Maestro 3
@@ -753,6 +772,7 @@  config SND_NM256
 
 config SND_PCXHR
 	tristate "Digigram PCXHR"
+	depends on LEGACY_PCI
 	select FW_LOADER
 	select SND_PCM
 	select SND_HWDEP
@@ -764,6 +784,7 @@  config SND_PCXHR
 
 config SND_RIPTIDE
 	tristate "Conexant Riptide"
+	depends on LEGACY_PCI
 	select FW_LOADER
 	select SND_OPL3_LIB
 	select SND_MPU401_UART
@@ -808,6 +829,7 @@  config SND_RME9652
 config SND_SE6X
 	tristate "Studio Evolution SE6X"
 	depends on SND_OXYGEN=n && SND_VIRTUOSO=n  # PCI ID conflict
+	depends on LEGACY_PCI
 	select SND_OXYGEN_LIB
 	select SND_PCM
 	select SND_MPU401_UART
@@ -827,10 +849,10 @@  config SND_SIS7019
 
 config SND_SONICVIBES
 	tristate "S3 SonicVibes"
+	depends on LEGACY_PCI && ZONE_DMA
 	select SND_OPL3_LIB
 	select SND_MPU401_UART
 	select SND_AC97_CODEC
-	depends on ZONE_DMA
 	help
 	  Say Y here to include support for soundcards based on the S3
 	  SonicVibes chip.
@@ -840,9 +862,9 @@  config SND_SONICVIBES
 
 config SND_TRIDENT
 	tristate "Trident 4D-Wave DX/NX; SiS 7018"
+	depends on LEGACY_PCI && ZONE_DMA
 	select SND_MPU401_UART
 	select SND_AC97_CODEC
-	depends on ZONE_DMA
 	help
 	  Say Y here to include support for soundcards based on Trident
 	  4D-Wave DX/NX or SiS 7018 chips.
@@ -852,6 +874,7 @@  config SND_TRIDENT
 
 config SND_VIA82XX
 	tristate "VIA 82C686A/B, 8233/8235 AC97 Controller"
+	depends on LEGACY_PCI
 	select SND_MPU401_UART
 	select SND_AC97_CODEC
 	help
@@ -863,6 +886,7 @@  config SND_VIA82XX
 
 config SND_VIA82XX_MODEM
 	tristate "VIA 82C686A/B, 8233 based Modems"
+	depends on LEGACY_PCI
 	select SND_AC97_CODEC
 	help
 	  Say Y here to include support for the integrated MC97 modem on
@@ -873,6 +897,7 @@  config SND_VIA82XX_MODEM
 
 config SND_VIRTUOSO
 	tristate "Asus Virtuoso 66/100/200 (Xonar)"
+	depends on LEGACY_PCI
 	select SND_OXYGEN_LIB
 	select SND_PCM
 	select SND_MPU401_UART
@@ -889,6 +914,7 @@  config SND_VIRTUOSO
 
 config SND_VX222
 	tristate "Digigram VX222"
+	depends on LEGACY_PCI
 	select SND_VX_LIB
 	help
 	  Say Y here to include support for Digigram VX222 soundcards.
@@ -898,6 +924,7 @@  config SND_VX222
 
 config SND_YMFPCI
 	tristate "Yamaha YMF724/740/744/754"
+	depends on LEGACY_PCI
 	select SND_OPL3_LIB
 	select SND_MPU401_UART
 	select SND_AC97_CODEC