@@ -372,6 +372,15 @@ config TOUCHSCREEN_EXC3000
To compile this driver as a module, choose M here: the
module will be called exc3000.
+config TOUCHSCREEN_FOCALTECH_FTS
+ tristate "Focaltech FTS Touchscreen"
+ depends on I2C
+ help
+ Say Y here to enable support for Focaltech FTS based
+ touch panels, including the 5452 and 8917 panels.
+
+ If unsure, say N.
+
config TOUCHSCREEN_FUJITSU
tristate "Fujitsu serial touchscreen"
select SERIO
@@ -44,6 +44,7 @@ obj-$(CONFIG_TOUCHSCREEN_ELO) += elo.o
obj-$(CONFIG_TOUCHSCREEN_EGALAX) += egalax_ts.o
obj-$(CONFIG_TOUCHSCREEN_EGALAX_SERIAL) += egalax_ts_serial.o
obj-$(CONFIG_TOUCHSCREEN_EXC3000) += exc3000.o
+obj-$(CONFIG_TOUCHSCREEN_FOCALTECH_FTS) += focaltech_fts.o
obj-$(CONFIG_TOUCHSCREEN_FUJITSU) += fujitsu_ts.o
obj-$(CONFIG_TOUCHSCREEN_GOODIX) += goodix_ts.o
obj-$(CONFIG_TOUCHSCREEN_HIDEEP) += hideep.o
new file mode 100644
@@ -0,0 +1,870 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *
+ * FocalTech touchscreen driver.
+ *
+ * Copyright (c) 2010-2017, FocalTech Systems, Ltd., all rights reserved.
+ * Copyright (C) 2018 XiaoMi, Inc.
+ * Copyright (c) 2021 Caleb Connolly <caleb@connolly.tech>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/input/mt.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <linux/of_gpio.h>
+#include <linux/of_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/mutex.h>
+#include <linux/wait.h>
+#include <linux/time.h>
+#include <linux/workqueue.h>
+#include <linux/uaccess.h>
+#include <linux/version.h>
+#include <linux/types.h>
+#include <linux/device.h>
+#include <linux/netdevice.h>
+#include <linux/unistd.h>
+#include <linux/vmalloc.h>
+#include <linux/notifier.h>
+
+#define FTS_CMD_START1 0x55
+#define FTS_CMD_START2 0xAA
+#define FTS_CMD_START_DELAY 10
+#define FTS_CMD_READ_ID 0x90
+#define FTS_CMD_READ_ID_LEN 4
+
+#define FTS_REG_INT_CNT 0x8F
+#define FTS_REG_FLOW_WORK_CNT 0x91
+#define FTS_REG_WORKMODE 0x00
+#define FTS_REG_WORKMODE_FACTORY_VALUE 0x40
+#define FTS_REG_WORKMODE_WORK_VALUE 0x00
+#define FTS_REG_ESDCHECK_DISABLE 0x8D
+#define FTS_REG_CHIP_ID 0xA3
+#define FTS_REG_CHIP_ID2 0x9F
+#define FTS_REG_POWER_MODE 0xA5
+#define FTS_REG_POWER_MODE_SLEEP_VALUE 0x03
+#define FTS_REG_FW_VER 0xA6
+#define FTS_REG_VENDOR_ID 0xA8
+#define FTS_REG_LCD_BUSY_NUM 0xAB
+#define FTS_REG_FACE_DEC_MODE_EN 0xB0
+#define FTS_REG_FACE_DEC_MODE_STATUS 0x01
+#define FTS_REG_IDE_PARA_VER_ID 0xB5
+#define FTS_REG_IDE_PARA_STATUS 0xB6
+#define FTS_REG_GLOVE_MODE_EN 0xC0
+#define FTS_REG_COVER_MODE_EN 0xC1
+#define FTS_REG_CHARGER_MODE_EN 0x8B
+#define FTS_REG_GESTURE_EN 0xD0
+#define FTS_REG_GESTURE_OUTPUT_ADDRESS 0xD3
+#define FTS_REG_MODULE_ID 0xE3
+#define FTS_REG_LIC_VER 0xE4
+#define FTS_REG_ESD_SATURATE 0xED
+
+#define FTS_MAX_POINTS_SUPPORT 10
+#define FTS_ONE_TCH_LEN 6
+
+#define FTS_MAX_ID 0x0A
+#define FTS_TOUCH_X_H_POS 3
+#define FTS_TOUCH_X_L_POS 4
+#define FTS_TOUCH_Y_H_POS 5
+#define FTS_TOUCH_Y_L_POS 6
+#define FTS_TOUCH_PRE_POS 7
+#define FTS_TOUCH_AREA_POS 8
+#define FTS_TOUCH_POINT_NUM 2
+#define FTS_TOUCH_EVENT_POS 3
+#define FTS_TOUCH_ID_POS 5
+#define FTS_COORDS_ARR_SIZE 2
+
+#define FTS_TOUCH_DOWN 0
+#define FTS_TOUCH_UP 1
+#define FTS_TOUCH_CONTACT 2
+
+#define EVENT_DOWN(flag) ((flag == FTS_TOUCH_DOWN) || (flag == FTS_TOUCH_CONTACT))
+
+#define FTS_LOCKDOWN_INFO_SIZE 8
+#define LOCKDOWN_INFO_ADDR 0x1FA0
+
+#define FTS_DRIVER_NAME "fts-i2c"
+#define INTERVAL_READ_REG 100 /* unit:ms */
+#define TIMEOUT_READ_REG 2000 /* unit:ms */
+#define FTS_VDD_MIN_UV 2600000
+#define FTS_VDD_MAX_UV 3300000
+#define FTS_I2C_VCC_MIN_UV 1800000
+#define FTS_I2C_VCC_MAX_UV 1800000
+
+#define I2C_RETRY_NUMBER 3
+
+#define CHIP_TYPE_5452 0x5452
+#define CHIP_TYPE_8719 0x8719
+
+static DEFINE_MUTEX(i2c_rw_access);
+
+struct ts_event {
+ int x; /*x coordinate */
+ int y; /*y coordinate */
+ int p; /* pressure */
+ int flag; /* touch event flag: 0 -- down; 1-- up; 2 -- contact */
+ int id; /*touch ID */
+ int area;
+};
+
+struct fts_ts_data {
+ struct i2c_client *client;
+ struct input_dev *input_dev;
+ struct regulator *vdd;
+ struct regulator *vcc_i2c;
+ spinlock_t irq_lock;
+ struct mutex report_mutex;
+ int irq;
+ bool irq_disabled;
+ bool power_disabled;
+
+ /* multi-touch */
+ struct ts_event *events;
+ u32 max_touch_number;
+ u8 *point_buf;
+ int pnt_buf_size;
+ int touches;
+ int touch_point;
+ int point_num;
+ bool dev_pm_suspend;
+ bool low_power_mode;
+ struct completion dev_pm_suspend_completion;
+ struct pinctrl *pinctrl;
+
+ // DT data
+ struct gpio_desc *irq_gpio;
+ struct gpio_desc *reset_gpio;
+ u32 width;
+ u32 height;
+};
+
+int fts_i2c_read(struct i2c_client *client, char *writebuf, int writelen,
+ char *readbuf, int readlen)
+{
+ int ret = 0;
+ int msg_count = !!writelen + 1;
+ struct i2c_msg msgs[2];
+
+ if (readlen < 0 || writelen < 0)
+ return -EINVAL;
+
+ // If writelen is zero then only populate msgs[0].
+ // otherwise we read into msgs[1]
+ msgs[msg_count-1].len = readlen;
+ msgs[msg_count-1].buf = readbuf;
+ msgs[msg_count-1].addr = client->addr;
+ msgs[msg_count-1].flags = I2C_M_RD;
+
+ if (writelen > 0) {
+ msgs[0].len = writelen;
+ msgs[0].buf = writebuf;
+ msgs[0].addr = client->addr;
+ msgs[0].flags = 0;
+ }
+
+ mutex_lock(&i2c_rw_access);
+
+ ret = i2c_transfer(client->adapter, msgs, msg_count);
+
+ mutex_unlock(&i2c_rw_access);
+ return ret;
+}
+
+int fts_i2c_read_reg(struct i2c_client *client, u8 regaddr, u8 *regvalue)
+{
+ return fts_i2c_read(client, ®addr, 1, regvalue, 1);
+}
+
+static bool fts_chip_is_valid(struct fts_ts_data *data, u16 id)
+{
+ if (id != CHIP_TYPE_5452 && id != CHIP_TYPE_8719)
+ return false;
+
+ return true;
+}
+
+int fts_wait_ready(struct fts_ts_data *data)
+{
+ int ret = 0;
+ int cnt = 0;
+ u8 reg_value[2];
+ struct i2c_client *client = data->client;
+
+ do {
+ ret = fts_i2c_read_reg(client, FTS_REG_CHIP_ID, ®_value[0]);
+ ret = fts_i2c_read_reg(client, FTS_REG_CHIP_ID2, ®_value[1]);
+ if (fts_chip_is_valid(data, reg_value[0] << 8 | reg_value[1])) {
+ dev_dbg(&data->client->dev, "TP Ready, Device ID = 0x%x%x, count = %d",
+ reg_value[0], reg_value[1], cnt);
+ return 0;
+ }
+ cnt++;
+ msleep(INTERVAL_READ_REG);
+ } while ((cnt * INTERVAL_READ_REG) < TIMEOUT_READ_REG);
+
+ return -EIO;
+}
+
+static int fts_power_source_init(struct fts_ts_data *data)
+{
+ int ret = 0;
+
+ data->vdd = devm_regulator_get(&data->client->dev, "vdd");
+ if (IS_ERR_OR_NULL(data->vdd)) {
+ ret = PTR_ERR(data->vdd);
+ dev_err(&data->client->dev, "get vdd regulator failed,ret=%d", ret);
+ return ret;
+ }
+
+ if (regulator_count_voltages(data->vdd) > 0) {
+ ret = regulator_set_voltage(data->vdd, FTS_VDD_MIN_UV,
+ FTS_VDD_MAX_UV);
+ if (ret < 0) {
+ dev_err(&data->client->dev, "failed to set vdd regulator ret=%d", ret);
+ goto exit;
+ }
+ }
+
+ data->vcc_i2c = devm_regulator_get(&data->client->dev, "vcc-i2c");
+ if (IS_ERR(data->vcc_i2c)) {
+ ret = PTR_ERR(data->vcc_i2c);
+ dev_err(&data->client->dev, "get vcc_i2c regulator failed,ret=%d", ret);
+ return ret;
+ }
+
+ if (regulator_count_voltages(data->vcc_i2c) > 0) {
+ ret = regulator_set_voltage(data->vcc_i2c, FTS_I2C_VCC_MIN_UV,
+ FTS_I2C_VCC_MAX_UV);
+ if (ret < 0) {
+ dev_err(&data->client->dev, "failed to set vcc_i2c regulator ret=%d",
+ ret);
+ goto exit;
+ }
+ }
+
+exit:
+ return ret;
+}
+
+static int fts_power_source_release(struct fts_ts_data *data)
+{
+ if (!data->power_disabled) {
+ regulator_disable(data->vdd);
+ regulator_disable(data->vcc_i2c);
+ }
+
+ devm_regulator_put(data->vdd);
+ devm_regulator_put(data->vcc_i2c);
+
+ return 0;
+}
+
+static int fts_power_source_ctrl(struct fts_ts_data *data, bool enable)
+{
+ int ret = 0;
+
+ if (enable) {
+ if (data->power_disabled) {
+ ret = regulator_enable(data->vdd);
+ if (ret < 0) {
+ dev_err(&data->client->dev,
+ "enable vdd regulator failed,ret=%d",
+ ret);
+ }
+
+ ret = regulator_enable(data->vcc_i2c);
+ if (ret < 0) {
+ dev_err(&data->client->dev, "enable vcc_i2c regulator failed,ret=%d",
+ ret);
+ }
+ data->power_disabled = false;
+ }
+ } else {
+ if (!data->power_disabled) {
+ ret = regulator_disable(data->vdd);
+ if (ret < 0) {
+ dev_err(&data->client->dev,
+ "disable vdd regulator failed,ret=%d",
+ ret);
+ }
+
+ ret = regulator_disable(data->vcc_i2c);
+ if (ret < 0) {
+ dev_err(&data->client->dev, "disable vcc_i2c regulator failed,ret=%d",
+ ret);
+ }
+
+ data->power_disabled = true;
+ }
+ }
+
+ return ret;
+}
+
+static int fts_pinctrl_set_active(struct fts_ts_data *data, bool enable)
+{
+ int ret = 0;
+ struct pinctrl_state *state = pinctrl_lookup_state(data->pinctrl,
+ enable ? "default" : "suspend");
+
+ if (IS_ERR_OR_NULL(state)) {
+ dev_err(&data->client->dev, "pinctrl lookup %s failed\n",
+ enable ? "default" : "suspend");
+ return -EINVAL;
+ }
+
+ ret = pinctrl_select_state(data->pinctrl, state);
+ if (ret < 0) {
+ dev_err(&data->client->dev,
+ "Failed to set pinctrl state: enable = %d, ret = %d",
+ enable, ret);
+ }
+
+ return ret;
+}
+
+static void fts_release_all_finger(struct fts_ts_data *data)
+{
+ struct input_dev *input_dev = data->input_dev;
+ u32 finger_count = 0;
+
+ mutex_lock(&data->report_mutex);
+
+ for (finger_count = 0; finger_count < data->max_touch_number;
+ finger_count++) {
+ input_mt_slot(input_dev, finger_count);
+ input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, false);
+ }
+
+ input_report_key(input_dev, BTN_TOUCH, 0);
+ input_sync(input_dev);
+
+ mutex_unlock(&data->report_mutex);
+}
+
+static int fts_input_report_b(struct fts_ts_data *data)
+{
+ int i = 0;
+ int uppoint = 0;
+ int touches = 0;
+ bool va_reported = false;
+ struct ts_event *events = data->events;
+
+ for (i = 0; i < data->touch_point; i++) {
+ if (events[i].id >= data->max_touch_number)
+ break;
+
+ va_reported = true;
+ input_mt_slot(data->input_dev, events[i].id);
+
+ if (events[i].flag == FTS_TOUCH_DOWN || events[i].flag == FTS_TOUCH_CONTACT) {
+ input_mt_report_slot_state(data->input_dev,
+ MT_TOOL_FINGER, true);
+
+ if (events[i].p <= 0)
+ events[i].p = 0x3f;
+
+ input_report_abs(data->input_dev, ABS_MT_PRESSURE,
+ events[i].p);
+
+ if (events[i].area <= 0)
+ events[i].area = 0x09;
+
+ input_report_abs(data->input_dev, ABS_MT_TOUCH_MAJOR,
+ events[i].area);
+ input_report_abs(data->input_dev, ABS_MT_POSITION_X,
+ events[i].x);
+ input_report_abs(data->input_dev, ABS_MT_POSITION_Y,
+ events[i].y);
+
+ touches |= BIT(events[i].id);
+ data->touches |= BIT(events[i].id);
+ } else {
+ uppoint++;
+
+ input_report_abs(data->input_dev, ABS_MT_PRESSURE, 0);
+
+ input_mt_report_slot_state(data->input_dev,
+ MT_TOOL_FINGER, false);
+ data->touches &= ~BIT(events[i].id);
+ }
+ }
+
+ if (data->touches ^ touches) {
+ for (i = 0; i < data->max_touch_number; i++) {
+ if (BIT(i) & (data->touches ^ touches)) {
+ va_reported = true;
+ input_mt_slot(data->input_dev, i);
+ input_mt_report_slot_state(
+ data->input_dev, MT_TOOL_FINGER, false);
+ }
+ }
+ }
+ data->touches = touches;
+
+ if (va_reported) {
+ if (!data->point_num || !touches)
+ input_report_key(data->input_dev, BTN_TOUCH, 0);
+ else
+ input_report_key(data->input_dev, BTN_TOUCH, 1);
+ } else {
+ dev_err(&data->client->dev, "va not reported, but touches=%d", touches);
+ }
+
+ input_sync(data->input_dev);
+ return 0;
+}
+
+static int fts_read_touchdata(struct fts_ts_data *data)
+{
+ int ret = 0;
+ int i = 0;
+ u8 pointid;
+ int base;
+ struct ts_event *events = data->events;
+ int max_touch_num = data->max_touch_number;
+ u8 *buf = data->point_buf;
+
+ data->point_num = 0;
+ data->touch_point = 0;
+
+ memset(buf, 0xFF, data->pnt_buf_size);
+ buf[0] = 0x00;
+
+ ret = fts_i2c_read(data->client, buf, 1, buf, data->pnt_buf_size);
+ if (ret < 0) {
+ dev_err(&data->client->dev, "read touchdata failed, ret:%d", ret);
+ return ret;
+ }
+ data->point_num = buf[FTS_TOUCH_POINT_NUM] & 0x0F;
+
+ if (data->point_num > max_touch_num)
+ return -EINVAL;
+
+ for (i = 0; i < max_touch_num; i++) {
+ base = FTS_ONE_TCH_LEN * i;
+
+ pointid = (buf[FTS_TOUCH_ID_POS + base]) >> 4;
+ if (pointid >= FTS_MAX_ID)
+ break;
+
+ else if (pointid >= max_touch_num)
+ return -EINVAL;
+
+ data->touch_point++;
+
+ events[i].x = ((buf[FTS_TOUCH_X_H_POS + base] & 0x0F) << 8) +
+ (buf[FTS_TOUCH_X_L_POS + base] & 0xFF);
+ events[i].y = ((buf[FTS_TOUCH_Y_H_POS + base] & 0x0F) << 8) +
+ (buf[FTS_TOUCH_Y_L_POS + base] & 0xFF);
+ events[i].flag = buf[FTS_TOUCH_EVENT_POS + base] >> 6;
+ events[i].id = buf[FTS_TOUCH_ID_POS + base] >> 4;
+ events[i].area = buf[FTS_TOUCH_AREA_POS + base] >> 4;
+ events[i].p = buf[FTS_TOUCH_PRE_POS + base];
+
+ if (((events[i].flag == FTS_TOUCH_DOWN) || (events[i].flag == FTS_TOUCH_CONTACT))
+ && (data->point_num == 0)) {
+ dev_err(&data->client->dev, "abnormal touch data from fw");
+ return -EIO;
+ }
+ }
+ if (data->touch_point == 0) {
+ dev_err(&data->client->dev, "no touch point information");
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static void fts_report_event(struct fts_ts_data *data)
+{
+ fts_input_report_b(data);
+}
+
+static irqreturn_t fts_ts_interrupt(int irq, void *d)
+{
+ int ret = 0;
+ struct fts_ts_data *data = (struct fts_ts_data *)d;
+
+ if (!data) {
+ dev_err(&data->client->dev, "%s() Invalid fts_ts_data", __func__);
+ return IRQ_HANDLED;
+ }
+
+ if (data->dev_pm_suspend) {
+ ret = wait_for_completion_timeout(
+ &data->dev_pm_suspend_completion,
+ msecs_to_jiffies(700));
+ if (!ret) {
+ dev_err(&data->client->dev,
+ "Didn't resume in time, skipping wakeup event handling\n");
+ return IRQ_HANDLED;
+ }
+ }
+
+ ret = fts_read_touchdata(data);
+ if (ret == 0) {
+ mutex_lock(&data->report_mutex);
+ fts_report_event(data);
+ mutex_unlock(&data->report_mutex);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int fts_input_init(struct fts_ts_data *data)
+{
+ int ret = 0;
+ struct input_dev *input_dev;
+
+ input_dev = input_allocate_device();
+ if (!input_dev) {
+ dev_err(&data->client->dev, "Failed to allocate memory for input device");
+ return -ENOMEM;
+ }
+
+ /* Init and register Input device */
+ input_dev->name = FTS_DRIVER_NAME;
+ input_dev->id.bustype = BUS_I2C;
+ input_dev->dev.parent = &data->client->dev;
+
+ input_set_drvdata(input_dev, data);
+
+ __set_bit(EV_SYN, input_dev->evbit);
+ __set_bit(EV_ABS, input_dev->evbit);
+ __set_bit(BTN_TOUCH, input_dev->keybit);
+ __set_bit(INPUT_PROP_DIRECT, input_dev->propbit);
+
+ input_mt_init_slots(input_dev, data->max_touch_number,
+ INPUT_MT_DIRECT);
+
+ input_set_abs_params(input_dev, ABS_MT_POSITION_X, 0,
+ data->width - 1, 0, 0);
+ input_set_abs_params(input_dev, ABS_MT_POSITION_Y, 0,
+ data->height - 1, 0, 0);
+ input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0, 0xFF, 0, 0);
+
+ input_set_abs_params(input_dev, ABS_MT_PRESSURE, 0, 0xFF, 0, 0);
+
+ data->pnt_buf_size = data->max_touch_number * FTS_ONE_TCH_LEN + 3;
+ data->point_buf = devm_kzalloc(&data->client->dev, data->pnt_buf_size, GFP_KERNEL);
+ if (!data->point_buf) {
+ dev_err(&data->client->dev, "Failed to alloc memory for point buf!");
+ ret = -ENOMEM;
+ goto err_out;
+ }
+
+ data->events = devm_kzalloc(&data->client->dev,
+ data->max_touch_number * sizeof(struct ts_event), GFP_KERNEL);
+ if (!data->events) {
+ ret = -ENOMEM;
+ goto err_out;
+ }
+ ret = input_register_device(input_dev);
+ if (ret < 0) {
+ dev_err(&data->client->dev, "Input device registration failed");
+ goto err_out;
+ }
+
+ data->input_dev = input_dev;
+
+ return 0;
+
+err_out:
+ input_set_drvdata(input_dev, NULL);
+ input_free_device(input_dev);
+ input_dev = NULL;
+
+ return ret;
+}
+
+static int fts_reset(struct fts_ts_data *data)
+{
+ gpiod_set_value_cansleep(data->reset_gpio, 0);
+ msleep(20);
+ gpiod_set_value_cansleep(data->reset_gpio, 1);
+
+ return 0;
+}
+
+static int fts_parse_dt(struct fts_ts_data *data)
+{
+ int ret = 0;
+ struct device *dev = &data->client->dev;
+ struct device_node *np = dev->of_node;
+ u32 val;
+
+ ret = of_property_read_u32(np, "touchscreen-size-x", &data->width);
+ if (ret < 0) {
+ dev_err(&data->client->dev, "Unable to read property 'touchscreen-size-x'");
+ return -EINVAL;
+ }
+
+ ret = of_property_read_u32(np, "touchscreen-size-y", &data->height);
+ if (ret < 0) {
+ dev_err(&data->client->dev, "Unable to read property 'touchscreen-size-y'");
+ return -EINVAL;
+ }
+
+ ret = of_property_read_u32(np, "focaltech,max-touch-number", &val);
+ if (ret < 0) {
+ dev_err(&data->client->dev, "Unable to read property 'focaltech,max-touch-number'");
+ return -EINVAL;
+ }
+ if (val < 2 || val > FTS_MAX_POINTS_SUPPORT) {
+ dev_err(&data->client->dev, "'focaltech,max-touch-number' out of range [2, %d]",
+ FTS_MAX_POINTS_SUPPORT);
+ return -EINVAL;
+ }
+ data->max_touch_number = val;
+
+ data->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
+ if (data->reset_gpio < 0) {
+ dev_err(&data->client->dev, "Unable to get reset gpio");
+ return -EINVAL;
+ }
+
+ data->irq_gpio = devm_gpiod_get_optional(dev, "irq", GPIOD_OUT_LOW);
+
+ return 0;
+}
+
+static int fts_ts_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int ret = 0;
+ struct fts_ts_data *data;
+ struct pinctrl_state *pinctrl_state_temp;
+
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+ dev_err(&data->client->dev, "I2C not supported");
+ return -ENODEV;
+ }
+
+ data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->client = client;
+ ret = fts_parse_dt(data);
+ if (ret < 0)
+ return ret;
+
+ i2c_set_clientdata(client, data);
+
+ spin_lock_init(&data->irq_lock);
+ mutex_init(&data->report_mutex);
+
+ ret = fts_input_init(data);
+ if (ret < 0) {
+ dev_err(&data->client->dev, "Input initialization fail");
+ goto err_input_init;
+ }
+
+ ret = fts_power_source_init(data);
+ if (ret < 0) {
+ dev_err(&data->client->dev, "fail to get vdd/vcc_i2c regulator");
+ goto err_power_init;
+ }
+
+ data->power_disabled = true;
+ ret = fts_power_source_ctrl(data, true);
+ if (ret < 0) {
+ dev_err(&data->client->dev, "fail to enable vdd/vcc_i2c regulator");
+ goto err_power_ctrl;
+ }
+
+ data->pinctrl = devm_pinctrl_get(&client->dev);
+ if (IS_ERR_OR_NULL(data->pinctrl)) {
+ dev_err(&data->client->dev, "Failed to get pinctrl, please check dts");
+ ret = PTR_ERR(data->pinctrl);
+ goto err_power_ctrl;
+ }
+
+ pinctrl_state_temp = pinctrl_lookup_state(data->pinctrl, "default");
+ if (IS_ERR_OR_NULL(pinctrl_state_temp) ||
+ IS_ERR_OR_NULL(pinctrl_lookup_state(data->pinctrl, "suspend"))) {
+ dev_err(&data->client->dev, "Failed to get default or suspend pinctrl state, please check dts");
+ goto err_power_ctrl;
+ }
+
+ fts_pinctrl_set_active(data, true);
+
+ ret = fts_reset(data);
+ if (ret < 0) {
+ dev_err(&data->client->dev, "Failed to reset chip");
+ goto err_gpio_config;
+ }
+
+ ret = fts_wait_ready(data);
+ if (ret < 0) {
+ dev_err(&data->client->dev, "Touch IC didn't turn on or is unsupported");
+ goto err_gpio_config;
+ }
+
+ if (data->irq_gpio) {
+ data->irq = gpiod_to_irq(data->irq_gpio);
+
+ ret = request_threaded_irq(data->irq, NULL, fts_ts_interrupt,
+ IRQF_ONESHOT,
+ data->client->name, data);
+ if (ret < 0) {
+ dev_err(&data->client->dev, "request irq failed");
+ goto err_gpio_config;
+ }
+ device_init_wakeup(&client->dev, true);
+ }
+
+ data->dev_pm_suspend = false;
+ init_completion(&data->dev_pm_suspend_completion);
+
+ return 0;
+
+err_gpio_config:
+ fts_power_source_ctrl(data, false);
+err_power_ctrl:
+ fts_power_source_release(data);
+err_power_init:
+ input_unregister_device(data->input_dev);
+err_input_init:
+ devm_kfree(&client->dev, data);
+
+ return ret;
+}
+
+static int fts_ts_remove(struct i2c_client *client)
+{
+ struct fts_ts_data *data = i2c_get_clientdata(client);
+
+ free_irq(client->irq, data);
+ input_unregister_device(data->input_dev);
+
+ fts_power_source_ctrl(data, false);
+ fts_power_source_release(data);
+
+ kfree(data->point_buf);
+ kfree(data->events);
+
+ devm_kfree(&client->dev, data);
+
+ return 0;
+}
+
+static int fts_ts_suspend(struct device *dev)
+{
+ struct fts_ts_data *data = dev_get_drvdata(dev);
+ int ret = 0;
+
+ disable_irq(data->irq);
+
+ ret = fts_power_source_ctrl(data, false);
+ if (ret < 0)
+ dev_err(dev, "power off fail, ret=%d", ret);
+ fts_pinctrl_set_active(data, false);
+
+ return 0;
+}
+
+static int fts_ts_resume(struct device *dev)
+{
+ struct fts_ts_data *data = dev_get_drvdata(dev);
+
+ fts_release_all_finger(data);
+
+ fts_power_source_ctrl(data, true);
+ fts_pinctrl_set_active(data, true);
+
+ fts_wait_ready(data);
+
+ enable_irq(data->irq);
+
+ return 0;
+}
+
+static int fts_pm_suspend(struct device *dev)
+{
+ struct fts_ts_data *data = dev_get_drvdata(dev);
+ int ret = 0;
+
+ data->dev_pm_suspend = true;
+
+ if (data->low_power_mode) {
+ ret = enable_irq_wake(data->irq);
+ if (ret < 0) {
+ dev_err(&data->client->dev, "enable_irq_wake(irq:%d) failed",
+ data->irq);
+ }
+ } else {
+ ret = fts_ts_suspend(dev);
+ }
+
+ reinit_completion(&data->dev_pm_suspend_completion);
+
+ return ret;
+}
+
+static int fts_pm_resume(struct device *dev)
+{
+ struct fts_ts_data *data = dev_get_drvdata(dev);
+ int ret = 0;
+
+ data->dev_pm_suspend = false;
+
+ if (data->low_power_mode) {
+ ret = disable_irq_wake(data->irq);
+ if (ret < 0) {
+ dev_err(&data->client->dev, "disable_irq_wake(irq:%d) failed",
+ data->irq);
+ }
+ } else {
+ ret = fts_ts_resume(dev);
+ }
+
+ complete(&data->dev_pm_suspend_completion);
+
+ return 0;
+}
+
+static const struct dev_pm_ops fts_dev_pm_ops = {
+ .suspend = fts_pm_suspend,
+ .resume = fts_pm_resume,
+};
+
+static const struct of_device_id fts_match_table[] = {
+ { .compatible = "focaltech,fts5452", },
+ { .compatible = "focaltech,fts8719", },
+ { /* sentinel */ },
+};
+
+MODULE_DEVICE_TABLE(of, fts_match_table);
+
+static struct i2c_driver fts_ts_driver = {
+ .probe = fts_ts_probe,
+ .remove = fts_ts_remove,
+ .driver = {
+ .name = FTS_DRIVER_NAME,
+ .pm = &fts_dev_pm_ops,
+ .of_match_table = fts_match_table,
+ },
+};
+module_i2c_driver(fts_ts_driver);
+
+MODULE_AUTHOR("Caleb Connolly <caleb@connolly.tech>");
+MODULE_DESCRIPTION("FocalTech touchscreen Driver");
+MODULE_LICENSE("GPL v2");
The focaltech FTS driver supports several variants of focaltech touch screens found in ~2018 era smartphones including a variant of the PocoPhone F1 and the SHIFT6mq. This driver is loosely based on the original driver from Focaltech but has been simplified and largely reworked. Signed-off-by: Caleb Connolly <caleb@connolly.tech> --- drivers/input/touchscreen/Kconfig | 9 + drivers/input/touchscreen/Makefile | 1 + drivers/input/touchscreen/focaltech_fts.c | 870 ++++++++++++++++++++++ 3 files changed, 880 insertions(+) create mode 100644 drivers/input/touchscreen/focaltech_fts.c -- 2.34.1