diff mbox series

[v2] HID: amd_sfh: Don't show client init failed as error when discovery fails

Message ID 20220512181848.27347-1-mario.limonciello@amd.com (mailing list archive)
State Mainlined
Commit e51d8d3ea3d773334d2c047c8d1623dba66f592a
Delegated to: Jiri Kosina
Headers show
Series [v2] HID: amd_sfh: Don't show client init failed as error when discovery fails | expand

Commit Message

Mario Limonciello May 12, 2022, 6:18 p.m. UTC
When sensor discovery fails, this means that the system doesn't have
any sensors connected and a user should only be notified at most one time.
A message is already displayed at WARN level of "failed to discover,
sensors not enabled".  It's pointless to show that the client init failed
at ERR level for the same condition.

Check the return code and don't display this message in those conditions.

Fixes: b5d7f43e97da ("HID: amd_sfh: Add support for sensor discovery")
Reported-by: David Chang <David.Chang@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
---
v1->v2:
 * fix some fat finger typos in commit message

 drivers/hid/amd-sfh-hid/amd_sfh_pcie.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

Comments

Basavaraj Natikar May 12, 2022, 6:21 p.m. UTC | #1
On 5/12/2022 11:48 PM, Mario Limonciello wrote:

> When sensor discovery fails, this means that the system doesn't have
> any sensors connected and a user should only be notified at most one time.
> A message is already displayed at WARN level of "failed to discover,
> sensors not enabled".  It's pointless to show that the client init failed
> at ERR level for the same condition.
>
> Check the return code and don't display this message in those conditions.
>
> Fixes: b5d7f43e97da ("HID: amd_sfh: Add support for sensor discovery")
> Reported-by: David Chang <David.Chang@amd.com>
> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
> ---
> v1->v2:
>  * fix some fat finger typos in commit message
>
>  drivers/hid/amd-sfh-hid/amd_sfh_pcie.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c b/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c
> index dadc491bbf6b..1441787a154a 100644
> --- a/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c
> +++ b/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c
> @@ -327,7 +327,8 @@ static int amd_mp2_pci_probe(struct pci_dev *pdev, const struct pci_device_id *i
>  	rc = amd_sfh_hid_client_init(privdata);
>  	if (rc) {
>  		amd_sfh_clear_intr(privdata);
> -		dev_err(&pdev->dev, "amd_sfh_hid_client_init failed\n");
> +		if (rc != -EOPNOTSUPP)
> +			dev_err(&pdev->dev, "amd_sfh_hid_client_init failed\n");
>  		return rc;
>  	}
>  

Acked-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>

Thanks,
Basavaraj
Jiri Kosina May 27, 2022, 7:07 a.m. UTC | #2
On Thu, 12 May 2022, Mario Limonciello wrote:

> When sensor discovery fails, this means that the system doesn't have
> any sensors connected and a user should only be notified at most one time.
> A message is already displayed at WARN level of "failed to discover,
> sensors not enabled".  It's pointless to show that the client init failed
> at ERR level for the same condition.
> 
> Check the return code and don't display this message in those conditions.
> 
> Fixes: b5d7f43e97da ("HID: amd_sfh: Add support for sensor discovery")
> Reported-by: David Chang <David.Chang@amd.com>
> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
> ---
> v1->v2:
>  * fix some fat finger typos in commit message
> 
>  drivers/hid/amd-sfh-hid/amd_sfh_pcie.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c b/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c
> index dadc491bbf6b..1441787a154a 100644
> --- a/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c
> +++ b/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c
> @@ -327,7 +327,8 @@ static int amd_mp2_pci_probe(struct pci_dev *pdev, const struct pci_device_id *i
>  	rc = amd_sfh_hid_client_init(privdata);
>  	if (rc) {
>  		amd_sfh_clear_intr(privdata);
> -		dev_err(&pdev->dev, "amd_sfh_hid_client_init failed\n");
> +		if (rc != -EOPNOTSUPP)
> +			dev_err(&pdev->dev, "amd_sfh_hid_client_init failed\n");
>  		return rc;

Applied, thank you.
diff mbox series

Patch

diff --git a/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c b/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c
index dadc491bbf6b..1441787a154a 100644
--- a/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c
+++ b/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c
@@ -327,7 +327,8 @@  static int amd_mp2_pci_probe(struct pci_dev *pdev, const struct pci_device_id *i
 	rc = amd_sfh_hid_client_init(privdata);
 	if (rc) {
 		amd_sfh_clear_intr(privdata);
-		dev_err(&pdev->dev, "amd_sfh_hid_client_init failed\n");
+		if (rc != -EOPNOTSUPP)
+			dev_err(&pdev->dev, "amd_sfh_hid_client_init failed\n");
 		return rc;
 	}