[v2] Input: tsc2007 - enable GPIO chips that can sleep

Commit Message

Benjamin Bara July 15, 2022, 7:45 a.m. UTC

From: Benjamin Bara <[e-mail]>

This enables the usage of "can_sleep" GPIO chips as "pin up" GPIO.
This might be the case if the GPIO chip is an expander behind i2c.

Signed-off-by: Benjamin Bara <[e-mail]>
Signed-off-by: Richard Leitner <[e-mail]>
---
 drivers/input/touchscreen/tsc2007.h      |  1 +
 drivers/input/touchscreen/tsc2007_core.c | 34 ++++++++++++++++++++----
 2 files changed, 30 insertions(+), 5 deletions(-)

Patch

diff --git a/drivers/input/touchscreen/tsc2007.h b/drivers/input/touchscreen/tsc2007.h
index 69b08dd6c8df..cdd90d727160 100644
--- a/drivers/input/touchscreen/tsc2007.h
+++ b/drivers/input/touchscreen/tsc2007.h
@@ -78,6 +78,7 @@  struct tsc2007 {
 	bool			stopped;
 
 	int			(*get_pendown_state)(struct device *);
+	int			(*get_pendown_state_cansleep)(struct device *dev);
 	void			(*clear_penirq)(void);
 
 	struct mutex		mlock;
diff --git a/drivers/input/touchscreen/tsc2007_core.c b/drivers/input/touchscreen/tsc2007_core.c
index 3e871d182c40..eba35ee1e28c 100644
--- a/drivers/input/touchscreen/tsc2007_core.c
+++ b/drivers/input/touchscreen/tsc2007_core.c
@@ -20,6 +20,7 @@ 
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/gpio/consumer.h>
+#include <linux/gpio/driver.h>
 #include <linux/input.h>
 #include <linux/interrupt.h>
 #include <linux/i2c.h>
@@ -108,6 +109,14 @@  bool tsc2007_is_pen_down(struct tsc2007 *ts)
 	return ts->get_pendown_state(&ts->client->dev);
 }
 
+static bool tsc2007_is_pen_down_cansleep(struct tsc2007 *ts)
+{
+	if (!ts->get_pendown_state_cansleep)
+		return true;
+
+	return ts->get_pendown_state_cansleep(&ts->client->dev);
+}
+
 static irqreturn_t tsc2007_soft_irq(int irq, void *handle)
 {
 	struct tsc2007 *ts = handle;
@@ -115,7 +124,7 @@  static irqreturn_t tsc2007_soft_irq(int irq, void *handle)
 	struct ts_event tc;
 	u32 rt;
 
-	while (!ts->stopped && tsc2007_is_pen_down(ts)) {
+	while (!ts->stopped && tsc2007_is_pen_down_cansleep(ts)) {
 
 		/* pen is down, continue with the measurement */
 
@@ -125,7 +134,7 @@  static irqreturn_t tsc2007_soft_irq(int irq, void *handle)
 
 		rt = tsc2007_calculate_resistance(ts, &tc);
 
-		if (!rt && !ts->get_pendown_state) {
+		if (!rt && !ts->get_pendown_state_cansleep) {
 			/*
 			 * If pressure reported is 0 and we don't have
 			 * callback to check pendown state, we have to
@@ -229,6 +238,14 @@  static int tsc2007_get_pendown_state_gpio(struct device *dev)
 	return gpiod_get_value(ts->gpiod);
 }
 
+static int tsc2007_get_pendown_state_gpio_cansleep(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct tsc2007 *ts = i2c_get_clientdata(client);
+
+	return gpiod_get_value_cansleep(ts->gpiod);
+}
+
 static int tsc2007_probe_properties(struct device *dev, struct tsc2007 *ts)
 {
 	u32 val32;
@@ -264,10 +281,17 @@  static int tsc2007_probe_properties(struct device *dev, struct tsc2007 *ts)
 	if (IS_ERR(ts->gpiod))
 		return PTR_ERR(ts->gpiod);
 
-	if (ts->gpiod)
-		ts->get_pendown_state = tsc2007_get_pendown_state_gpio;
-	else
+	if (ts->gpiod) {
+		ts->get_pendown_state_cansleep = tsc2007_get_pendown_state_gpio_cansleep;
+
+		/* pendown pin is read during hard irq -> gpio chip is not allowed to sleep */
+		if (gpiod_to_chip(ts->gpiod) && !gpiod_to_chip(ts->gpiod)->can_sleep)
+			ts->get_pendown_state = tsc2007_get_pendown_state_gpio;
+		else
+			dev_dbg(dev, "Pen down GPIO chip can sleep\n");
+	} else {
 		dev_warn(dev, "Pen down GPIO is not specified in properties\n");
+	}
 
 	return 0;
 }