| Message ID | 20220922182424.934340-3-lkml@vorpal.se (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Quickstart buttons driver and Toshiba Z830 | expand |
Hi, On 9/22/22 20:24, Arvid Norlander wrote: > The Z830 has some buttons that will only work properly as "quickstart" > buttons. To enable them in that mode, a value between 1 and 7 must be > used for HCI_HOTKEY_EVENT. Windows uses 0x5 on this laptop so use that for > maximum predictability and compatibility. > > As there is not yet a known way of auto detection, this patch uses a DMI > quirk table. A module parameter is exposed to allow setting this on other > models for testing. > > Signed-off-by: Arvid Norlander <lkml@vorpal.se> Thanks, patch looks good to me: Reviewed-by: Hans de Goede <hdegoede@redhat.com> Note I assume that it is best to merge the 2 patches together, so I won't merge this now. Please add my Reviewed-by to the next version of the patch. Regards, Hans > --- > drivers/platform/x86/toshiba_acpi.c | 36 ++++++++++++++++++++++++++--- > 1 file changed, 33 insertions(+), 3 deletions(-) > > diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c > index 9f1394b73895..894afe74d815 100644 > --- a/drivers/platform/x86/toshiba_acpi.c > +++ b/drivers/platform/x86/toshiba_acpi.c > @@ -58,6 +58,11 @@ module_param(turn_on_panel_on_resume, int, 0644); > MODULE_PARM_DESC(turn_on_panel_on_resume, > "Call HCI_PANEL_POWER_ON on resume (-1 = auto, 0 = no, 1 = yes"); > > +static int hci_hotkey_quickstart = -1; > +module_param(hci_hotkey_quickstart, int, 0644); > +MODULE_PARM_DESC(hci_hotkey_quickstart, > + "Call HCI_HOTKEY_EVENT with value 0x5 for quickstart button support (-1 = auto, 0 = no, 1 = yes"); > + > #define TOSHIBA_WMI_EVENT_GUID "59142400-C6A3-40FA-BADB-8A2652834100" > > /* Scan code for Fn key on TOS1900 models */ > @@ -137,6 +142,7 @@ MODULE_PARM_DESC(turn_on_panel_on_resume, > #define HCI_ACCEL_MASK 0x7fff > #define HCI_ACCEL_DIRECTION_MASK 0x8000 > #define HCI_HOTKEY_DISABLE 0x0b > +#define HCI_HOTKEY_ENABLE_QUICKSTART 0x05 > #define HCI_HOTKEY_ENABLE 0x09 > #define HCI_HOTKEY_SPECIAL_FUNCTIONS 0x10 > #define HCI_LCD_BRIGHTNESS_BITS 3 > @@ -2731,10 +2737,15 @@ static int toshiba_acpi_enable_hotkeys(struct toshiba_acpi_dev *dev) > return -ENODEV; > > /* > + * Enable quickstart buttons if supported. > + * > * Enable the "Special Functions" mode only if they are > * supported and if they are activated. > */ > - if (dev->kbd_function_keys_supported && dev->special_functions) > + if (hci_hotkey_quickstart) > + result = hci_write(dev, HCI_HOTKEY_EVENT, > + HCI_HOTKEY_ENABLE_QUICKSTART); > + else if (dev->kbd_function_keys_supported && dev->special_functions) > result = hci_write(dev, HCI_HOTKEY_EVENT, > HCI_HOTKEY_SPECIAL_FUNCTIONS); > else > @@ -3260,7 +3271,14 @@ static const char *find_hci_method(acpi_handle handle) > * works. toshiba_acpi_resume() uses HCI_PANEL_POWER_ON to avoid changing > * the configured brightness level. > */ > -static const struct dmi_system_id turn_on_panel_on_resume_dmi_ids[] = { > +#define QUIRK_TURN_ON_PANEL_ON_RESUME BIT(0) > +/* > + * Some Toshibas use "quickstart" keys. On these, HCI_HOTKEY_EVENT must use > + * the value HCI_HOTKEY_ENABLE_QUICKSTART. > + */ > +#define QUIRK_HCI_HOTKEY_QUICKSTART BIT(1) > + > +static const struct dmi_system_id toshiba_dmi_quirks[] = { > { > /* Toshiba Portégé R700 */ > /* https://bugzilla.kernel.org/show_bug.cgi?id=21012 */ > @@ -3268,6 +3286,7 @@ static const struct dmi_system_id turn_on_panel_on_resume_dmi_ids[] = { > DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), > DMI_MATCH(DMI_PRODUCT_NAME, "PORTEGE R700"), > }, > + .driver_data = (void *)QUIRK_TURN_ON_PANEL_ON_RESUME, > }, > { > /* Toshiba Satellite/Portégé R830 */ > @@ -3277,6 +3296,7 @@ static const struct dmi_system_id turn_on_panel_on_resume_dmi_ids[] = { > DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), > DMI_MATCH(DMI_PRODUCT_NAME, "R830"), > }, > + .driver_data = (void *)QUIRK_TURN_ON_PANEL_ON_RESUME, > }, > { > /* Toshiba Satellite/Portégé Z830 */ > @@ -3284,6 +3304,7 @@ static const struct dmi_system_id turn_on_panel_on_resume_dmi_ids[] = { > DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), > DMI_MATCH(DMI_PRODUCT_NAME, "Z830"), > }, > + .driver_data = (void *)(QUIRK_TURN_ON_PANEL_ON_RESUME | QUIRK_HCI_HOTKEY_QUICKSTART), > }, > }; > > @@ -3292,6 +3313,8 @@ static int toshiba_acpi_add(struct acpi_device *acpi_dev) > struct toshiba_acpi_dev *dev; > const char *hci_method; > u32 dummy; > + const struct dmi_system_id *dmi_id; > + long quirks = 0; > int ret = 0; > > if (toshiba_acpi) > @@ -3444,8 +3467,15 @@ static int toshiba_acpi_add(struct acpi_device *acpi_dev) > } > #endif > > + dmi_id = dmi_first_match(toshiba_dmi_quirks); > + if (dmi_id) > + quirks = (long)dmi_id->driver_data; > + > if (turn_on_panel_on_resume == -1) > - turn_on_panel_on_resume = dmi_check_system(turn_on_panel_on_resume_dmi_ids); > + turn_on_panel_on_resume = !!(quirks & QUIRK_TURN_ON_PANEL_ON_RESUME); > + > + if (hci_hotkey_quickstart == -1) > + hci_hotkey_quickstart = !!(quirks & QUIRK_HCI_HOTKEY_QUICKSTART); > > toshiba_wwan_available(dev); > if (dev->wwan_supported)
diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c index 9f1394b73895..894afe74d815 100644 --- a/drivers/platform/x86/toshiba_acpi.c +++ b/drivers/platform/x86/toshiba_acpi.c @@ -58,6 +58,11 @@ module_param(turn_on_panel_on_resume, int, 0644); MODULE_PARM_DESC(turn_on_panel_on_resume, "Call HCI_PANEL_POWER_ON on resume (-1 = auto, 0 = no, 1 = yes"); +static int hci_hotkey_quickstart = -1; +module_param(hci_hotkey_quickstart, int, 0644); +MODULE_PARM_DESC(hci_hotkey_quickstart, + "Call HCI_HOTKEY_EVENT with value 0x5 for quickstart button support (-1 = auto, 0 = no, 1 = yes"); + #define TOSHIBA_WMI_EVENT_GUID "59142400-C6A3-40FA-BADB-8A2652834100" /* Scan code for Fn key on TOS1900 models */ @@ -137,6 +142,7 @@ MODULE_PARM_DESC(turn_on_panel_on_resume, #define HCI_ACCEL_MASK 0x7fff #define HCI_ACCEL_DIRECTION_MASK 0x8000 #define HCI_HOTKEY_DISABLE 0x0b +#define HCI_HOTKEY_ENABLE_QUICKSTART 0x05 #define HCI_HOTKEY_ENABLE 0x09 #define HCI_HOTKEY_SPECIAL_FUNCTIONS 0x10 #define HCI_LCD_BRIGHTNESS_BITS 3 @@ -2731,10 +2737,15 @@ static int toshiba_acpi_enable_hotkeys(struct toshiba_acpi_dev *dev) return -ENODEV; /* + * Enable quickstart buttons if supported. + * * Enable the "Special Functions" mode only if they are * supported and if they are activated. */ - if (dev->kbd_function_keys_supported && dev->special_functions) + if (hci_hotkey_quickstart) + result = hci_write(dev, HCI_HOTKEY_EVENT, + HCI_HOTKEY_ENABLE_QUICKSTART); + else if (dev->kbd_function_keys_supported && dev->special_functions) result = hci_write(dev, HCI_HOTKEY_EVENT, HCI_HOTKEY_SPECIAL_FUNCTIONS); else @@ -3260,7 +3271,14 @@ static const char *find_hci_method(acpi_handle handle) * works. toshiba_acpi_resume() uses HCI_PANEL_POWER_ON to avoid changing * the configured brightness level. */ -static const struct dmi_system_id turn_on_panel_on_resume_dmi_ids[] = { +#define QUIRK_TURN_ON_PANEL_ON_RESUME BIT(0) +/* + * Some Toshibas use "quickstart" keys. On these, HCI_HOTKEY_EVENT must use + * the value HCI_HOTKEY_ENABLE_QUICKSTART. + */ +#define QUIRK_HCI_HOTKEY_QUICKSTART BIT(1) + +static const struct dmi_system_id toshiba_dmi_quirks[] = { { /* Toshiba Portégé R700 */ /* https://bugzilla.kernel.org/show_bug.cgi?id=21012 */ @@ -3268,6 +3286,7 @@ static const struct dmi_system_id turn_on_panel_on_resume_dmi_ids[] = { DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), DMI_MATCH(DMI_PRODUCT_NAME, "PORTEGE R700"), }, + .driver_data = (void *)QUIRK_TURN_ON_PANEL_ON_RESUME, }, { /* Toshiba Satellite/Portégé R830 */ @@ -3277,6 +3296,7 @@ static const struct dmi_system_id turn_on_panel_on_resume_dmi_ids[] = { DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), DMI_MATCH(DMI_PRODUCT_NAME, "R830"), }, + .driver_data = (void *)QUIRK_TURN_ON_PANEL_ON_RESUME, }, { /* Toshiba Satellite/Portégé Z830 */ @@ -3284,6 +3304,7 @@ static const struct dmi_system_id turn_on_panel_on_resume_dmi_ids[] = { DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), DMI_MATCH(DMI_PRODUCT_NAME, "Z830"), }, + .driver_data = (void *)(QUIRK_TURN_ON_PANEL_ON_RESUME | QUIRK_HCI_HOTKEY_QUICKSTART), }, }; @@ -3292,6 +3313,8 @@ static int toshiba_acpi_add(struct acpi_device *acpi_dev) struct toshiba_acpi_dev *dev; const char *hci_method; u32 dummy; + const struct dmi_system_id *dmi_id; + long quirks = 0; int ret = 0; if (toshiba_acpi) @@ -3444,8 +3467,15 @@ static int toshiba_acpi_add(struct acpi_device *acpi_dev) } #endif + dmi_id = dmi_first_match(toshiba_dmi_quirks); + if (dmi_id) + quirks = (long)dmi_id->driver_data; + if (turn_on_panel_on_resume == -1) - turn_on_panel_on_resume = dmi_check_system(turn_on_panel_on_resume_dmi_ids); + turn_on_panel_on_resume = !!(quirks & QUIRK_TURN_ON_PANEL_ON_RESUME); + + if (hci_hotkey_quickstart == -1) + hci_hotkey_quickstart = !!(quirks & QUIRK_HCI_HOTKEY_QUICKSTART); toshiba_wwan_available(dev); if (dev->wwan_supported)
The Z830 has some buttons that will only work properly as "quickstart" buttons. To enable them in that mode, a value between 1 and 7 must be used for HCI_HOTKEY_EVENT. Windows uses 0x5 on this laptop so use that for maximum predictability and compatibility. As there is not yet a known way of auto detection, this patch uses a DMI quirk table. A module parameter is exposed to allow setting this on other models for testing. Signed-off-by: Arvid Norlander <lkml@vorpal.se> --- drivers/platform/x86/toshiba_acpi.c | 36 ++++++++++++++++++++++++++--- 1 file changed, 33 insertions(+), 3 deletions(-)