diff mbox series

[v2,05/11] dt-bindings: mfd: qcom-pm8xxx: document qcom,pm8921 as fallback of qcom,pm8018

Message ID 20220928-mdm9615-dt-schema-fixes-v2-5-87fbeb4ae053@linaro.org (mailing list archive)
State Superseded
Headers show
Series arm: qcom: mdm9615: first round of bindings and DT fixes | expand

Commit Message

Neil Armstrong Oct. 4, 2022, 8:08 a.m. UTC
The PM8018 is used as compatible with PM8921 on the MDM9615, document this situation,
and an example section to validate this change.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

Comments

Krzysztof Kozlowski Oct. 4, 2022, 8:55 a.m. UTC | #1
On 04/10/2022 10:08, Neil Armstrong wrote:
> The PM8018 is used as compatible with PM8921 on the MDM9615, document this situation,
> and an example section to validate this change.
> 
> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
> 
> diff --git a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml
> index 61bd0b3ce02f..24d71918ff8a 100644
> --- a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml
> +++ b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml
> @@ -15,11 +15,15 @@ description: |
>  
>  properties:
>    compatible:
> -    enum:
> -      - qcom,pm8018
> -      - qcom,pm8058
> -      - qcom,pm8821
> -      - qcom,pm8921
> +    oneOf:
> +      - enum:
> +          - qcom,pm8058
> +          - qcom,pm8821
> +          - qcom,pm8921
> +      - items:
> +          - enum:
> +              - qcom,pm8018
> +          - const: qcom,pm8921
>  
>    reg:
>      maxItems: 1
> @@ -52,4 +56,35 @@ required:
>    - interrupt-controller
>  
>  additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    ssbi {
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +      pmic@0 {
> +        compatible = "qcom,pm8921";
> +        reg = <0>;
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +        interrupt-controller;
> +        #interrupt-cells = <2>;
> +
> +        interrupt-parent = <&tlmm>;
> +        interrupts = <32 IRQ_TYPE_EDGE_RISING>;
> +      };
> +
> +      pmic@1 {
> +        compatible = "qcom,pm8018", "qcom,pm8921";
> +        reg = <1>;
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +        interrupt-controller;
> +        #interrupt-cells = <2>;
> +
> +        interrupt-parent = <&tlmm>;
> +        interrupts = <33 IRQ_TYPE_EDGE_RISING>;
> +      };

These two pmics are exactly the same (except compatible), so just keep
one example... unless both are coming from the same, real DTS?

Best regards,
Krzysztof
Neil Armstrong Oct. 4, 2022, 9:38 a.m. UTC | #2
On 04/10/2022 10:55, Krzysztof Kozlowski wrote:
> On 04/10/2022 10:08, Neil Armstrong wrote:
>> The PM8018 is used as compatible with PM8921 on the MDM9615, document this situation,
>> and an example section to validate this change.
>>
>> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
>>

<snip>

>> +
>> +examples:
>> +  - |
>> +    #include <dt-bindings/interrupt-controller/irq.h>
>> +    ssbi {
>> +      #address-cells = <1>;
>> +      #size-cells = <0>;
>> +      pmic@0 {
>> +        compatible = "qcom,pm8921";
>> +        reg = <0>;
>> +        #address-cells = <1>;
>> +        #size-cells = <0>;
>> +        interrupt-controller;
>> +        #interrupt-cells = <2>;
>> +
>> +        interrupt-parent = <&tlmm>;
>> +        interrupts = <32 IRQ_TYPE_EDGE_RISING>;
>> +      };
>> +
>> +      pmic@1 {
>> +        compatible = "qcom,pm8018", "qcom,pm8921";
>> +        reg = <1>;
>> +        #address-cells = <1>;
>> +        #size-cells = <0>;
>> +        interrupt-controller;
>> +        #interrupt-cells = <2>;
>> +
>> +        interrupt-parent = <&tlmm>;
>> +        interrupts = <33 IRQ_TYPE_EDGE_RISING>;
>> +      };
> 
> These two pmics are exactly the same (except compatible), so just keep
> one example... unless both are coming from the same, real DTS?

It was mainly to exercise the fallback, but it's useless as-is so I'll remove in v3.

> 
> Best regards,
> Krzysztof
> 

Thanks,
Neil
Krzysztof Kozlowski Oct. 4, 2022, 10:03 a.m. UTC | #3
On 04/10/2022 11:38, Neil Armstrong wrote:
>>> +        compatible = "qcom,pm8018", "qcom,pm8921";
>>> +        reg = <1>;
>>> +        #address-cells = <1>;
>>> +        #size-cells = <0>;
>>> +        interrupt-controller;
>>> +        #interrupt-cells = <2>;
>>> +
>>> +        interrupt-parent = <&tlmm>;
>>> +        interrupts = <33 IRQ_TYPE_EDGE_RISING>;
>>> +      };
>>
>> These two pmics are exactly the same (except compatible), so just keep
>> one example... unless both are coming from the same, real DTS?
> 
> It was mainly to exercise the fallback, but it's useless as-is so I'll remove in v3.

No need to test different compatibles.

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml
index 61bd0b3ce02f..24d71918ff8a 100644
--- a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml
+++ b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml
@@ -15,11 +15,15 @@  description: |
 
 properties:
   compatible:
-    enum:
-      - qcom,pm8018
-      - qcom,pm8058
-      - qcom,pm8821
-      - qcom,pm8921
+    oneOf:
+      - enum:
+          - qcom,pm8058
+          - qcom,pm8821
+          - qcom,pm8921
+      - items:
+          - enum:
+              - qcom,pm8018
+          - const: qcom,pm8921
 
   reg:
     maxItems: 1
@@ -52,4 +56,35 @@  required:
   - interrupt-controller
 
 additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    ssbi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      pmic@0 {
+        compatible = "qcom,pm8921";
+        reg = <0>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+
+        interrupt-parent = <&tlmm>;
+        interrupts = <32 IRQ_TYPE_EDGE_RISING>;
+      };
+
+      pmic@1 {
+        compatible = "qcom,pm8018", "qcom,pm8921";
+        reg = <1>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+
+        interrupt-parent = <&tlmm>;
+        interrupts = <33 IRQ_TYPE_EDGE_RISING>;
+      };
+    };
 ...