[v6,01/13] HID: i2c-hid: Use PM subsystem to manage wake irq

Commit Message

Raul Rangel Sept. 29, 2022, 4:19 p.m. UTC

The I2C hid driver is currently manually managing the wake
IRQ. This change removes the explicit enable_irq_wake/disable_irq_wake
and instead relies on the PM subsystem. This is done by calling
dev_pm_set_wake_irq.

i2c_device_probe already calls dev_pm_set_wake_irq when using device
tree, and i2c_device_remove also already calls dev_pm_clear_wake_irq.
There could be some device tree systems that have incorrectly declared
`wake` capabilities, so this change will set the wake irq if one is
missing. This matches the previous behavior.

I tested this on an ACPI system that has a HID touchscreen and verified
the IRQ was armed for wake on suspend.

Signed-off-by: Raul E Rangel <[e-mail]>
Acked-by: Benjamin Tissoires <[e-mail]>

---

(no changes since v5)

Changes in v5:
- Added Acked-by: Benjamin Tissoires

Changes in v3:
- Fixed typo in if condition

Changes in v2:
- Set the wake_irq when not configured by the i2c-core. This is
  different than v1, where the wake_irq was only set for non DT systems.

 drivers/hid/i2c-hid/i2c-hid-core.c | 33 +++++++++++-------------------
 1 file changed, 12 insertions(+), 21 deletions(-)

Patch

diff --git a/drivers/hid/i2c-hid/i2c-hid-core.c b/drivers/hid/i2c-hid/i2c-hid-core.c
index baa169fadd66321..a2fa40dec04ea59 100644
--- a/drivers/hid/i2c-hid/i2c-hid-core.c
+++ b/drivers/hid/i2c-hid/i2c-hid-core.c
@@ -26,6 +26,7 @@ 
 #include <linux/delay.h>
 #include <linux/slab.h>
 #include <linux/pm.h>
+#include <linux/pm_wakeirq.h>
 #include <linux/device.h>
 #include <linux/wait.h>
 #include <linux/err.h>
@@ -116,7 +117,6 @@  struct i2c_hid {
 
 	wait_queue_head_t	wait;		/* For waiting the interrupt */
 
-	bool			irq_wake_enabled;
 	struct mutex		reset_lock;
 
 	struct i2chid_ops	*ops;
@@ -1036,6 +1036,15 @@  int i2c_hid_core_probe(struct i2c_client *client, struct i2chid_ops *ops,
 	if (ret < 0)
 		goto err_powered;
 
+	/*
+	 * The wake IRQ should be declared via device tree instead of assuming
+	 * the IRQ can wake the system. This is here for legacy reasons and
+	 * will be removed once the i2c-core supports querying ACPI for wake
+	 * capabilities.
+	 */
+	if (!client->dev.power.wakeirq)
+		dev_pm_set_wake_irq(&client->dev, client->irq);
+
 	hid = hid_allocate_device();
 	if (IS_ERR(hid)) {
 		ret = PTR_ERR(hid);
@@ -1119,7 +1128,6 @@  static int i2c_hid_core_suspend(struct device *dev)
 	struct i2c_hid *ihid = i2c_get_clientdata(client);
 	struct hid_device *hid = ihid->hid;
 	int ret;
-	int wake_status;
 
 	ret = hid_driver_suspend(hid, PMSG_SUSPEND);
 	if (ret < 0)
@@ -1130,16 +1138,8 @@  static int i2c_hid_core_suspend(struct device *dev)
 
 	disable_irq(client->irq);
 
-	if (device_may_wakeup(&client->dev)) {
-		wake_status = enable_irq_wake(client->irq);
-		if (!wake_status)
-			ihid->irq_wake_enabled = true;
-		else
-			hid_warn(hid, "Failed to enable irq wake: %d\n",
-				wake_status);
-	} else {
+	if (!device_may_wakeup(&client->dev))
 		i2c_hid_core_power_down(ihid);
-	}
 
 	return 0;
 }
@@ -1150,18 +1150,9 @@  static int i2c_hid_core_resume(struct device *dev)
 	struct i2c_client *client = to_i2c_client(dev);
 	struct i2c_hid *ihid = i2c_get_clientdata(client);
 	struct hid_device *hid = ihid->hid;
-	int wake_status;
 
-	if (!device_may_wakeup(&client->dev)) {
+	if (!device_may_wakeup(&client->dev))
 		i2c_hid_core_power_up(ihid);
-	} else if (ihid->irq_wake_enabled) {
-		wake_status = disable_irq_wake(client->irq);
-		if (!wake_status)
-			ihid->irq_wake_enabled = false;
-		else
-			hid_warn(hid, "Failed to disable irq wake: %d\n",
-				wake_status);
-	}
 
 	enable_irq(client->irq);