diff mbox series

[v6,RESEND] HID: multitouch: Add quirks for flipped axes

Message ID 20230110202550.651091-1-ballway@chromium.org (mailing list archive)
State Superseded
Delegated to: Jiri Kosina
Headers show
Series [v6,RESEND] HID: multitouch: Add quirks for flipped axes | expand

Commit Message

Allen Ballway Jan. 10, 2023, 8:25 p.m. UTC
Certain touchscreen devices, such as the ELAN9034, are oriented
incorrectly and report touches on opposite points on the X and Y axes.
For example, a 100x200 screen touched at (10,20) would report (90, 180)
and vice versa.

This is fixed by adding device quirks to transform the touch points
into the correct spaces, from X -> MAX(X) - X, and Y -> MAX(Y) - Y.

Signed-off-by: Allen Ballway <ballway@chromium.org>
---
V5 -> V6: Add another IS_ENABLED check for CONFIG_I2C_DMI_CORE because
the module may not be there at all.

V4 -> V5: Add IS_ENABLED check for CONFIG_DMI to prevent linker error.

V3 -> V4: Move quirk logic to i2c_hid_get_dmi_quirks and remove
duplicate quirks from hid-multitouch.

V2 -> V3: Use existing HID_QUIRK_*_INVERT and match the quirk in
hid-quirk, passing down to hid-multitouch through the hid device.

V1 -> V2: Address review comments, change to use DMI match. Confirmed
MT_TOOL_X/Y require transformation and update orientation based on
flipped axes.


 drivers/hid/hid-multitouch.c             | 39 ++++++++++++++++++---
 drivers/hid/hid-quirks.c                 |  6 ++++
 drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c | 43 ++++++++++++++++++++++++
 drivers/hid/i2c-hid/i2c-hid.h            |  3 ++
 4 files changed, 87 insertions(+), 4 deletions(-)

--
2.39.0.rc1.256.g54fd8350bd-goog

Comments

Jiri Kosina Jan. 18, 2023, 9:09 a.m. UTC | #1
On Tue, 10 Jan 2023, Allen Ballway wrote:

> Certain touchscreen devices, such as the ELAN9034, are oriented
> incorrectly and report touches on opposite points on the X and Y axes.
> For example, a 100x200 screen touched at (10,20) would report (90, 180)
> and vice versa.
> 
> This is fixed by adding device quirks to transform the touch points
> into the correct spaces, from X -> MAX(X) - X, and Y -> MAX(Y) - Y.
> 
> Signed-off-by: Allen Ballway <ballway@chromium.org>
> ---
> V5 -> V6: Add another IS_ENABLED check for CONFIG_I2C_DMI_CORE because
> the module may not be there at all.
> 
> V4 -> V5: Add IS_ENABLED check for CONFIG_DMI to prevent linker error.
> 
> V3 -> V4: Move quirk logic to i2c_hid_get_dmi_quirks and remove
> duplicate quirks from hid-multitouch.
> 
> V2 -> V3: Use existing HID_QUIRK_*_INVERT and match the quirk in
> hid-quirk, passing down to hid-multitouch through the hid device.
> 
> V1 -> V2: Address review comments, change to use DMI match. Confirmed
> MT_TOOL_X/Y require transformation and update orientation based on
> flipped axes.

Appplied, thank you.
diff mbox series

Patch

diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c
index 91a4d3fc30e08..622fe6928104c 100644
--- a/drivers/hid/hid-multitouch.c
+++ b/drivers/hid/hid-multitouch.c
@@ -71,6 +71,7 @@  MODULE_LICENSE("GPL");
 #define MT_QUIRK_SEPARATE_APP_REPORT	BIT(19)
 #define MT_QUIRK_FORCE_MULTI_INPUT	BIT(20)
 #define MT_QUIRK_DISABLE_WAKEUP		BIT(21)
+#define MT_QUIRK_ORIENTATION_INVERT	BIT(22)

 #define MT_INPUTMODE_TOUCHSCREEN	0x02
 #define MT_INPUTMODE_TOUCHPAD		0x03
@@ -1009,6 +1010,7 @@  static int mt_process_slot(struct mt_device *td, struct input_dev *input,
 			    struct mt_usages *slot)
 {
 	struct input_mt *mt = input->mt;
+	struct hid_device *hdev = td->hdev;
 	__s32 quirks = app->quirks;
 	bool valid = true;
 	bool confidence_state = true;
@@ -1086,6 +1088,10 @@  static int mt_process_slot(struct mt_device *td, struct input_dev *input,
 		int orientation = wide;
 		int max_azimuth;
 		int azimuth;
+		int x;
+		int y;
+		int cx;
+		int cy;

 		if (slot->a != DEFAULT_ZERO) {
 			/*
@@ -1104,6 +1110,9 @@  static int mt_process_slot(struct mt_device *td, struct input_dev *input,
 			if (azimuth > max_azimuth * 2)
 				azimuth -= max_azimuth * 4;
 			orientation = -azimuth;
+			if (quirks & MT_QUIRK_ORIENTATION_INVERT)
+				orientation = -orientation;
+
 		}

 		if (quirks & MT_QUIRK_TOUCH_SIZE_SCALING) {
@@ -1115,10 +1124,23 @@  static int mt_process_slot(struct mt_device *td, struct input_dev *input,
 			minor = minor >> 1;
 		}

-		input_event(input, EV_ABS, ABS_MT_POSITION_X, *slot->x);
-		input_event(input, EV_ABS, ABS_MT_POSITION_Y, *slot->y);
-		input_event(input, EV_ABS, ABS_MT_TOOL_X, *slot->cx);
-		input_event(input, EV_ABS, ABS_MT_TOOL_Y, *slot->cy);
+		x = hdev->quirks & HID_QUIRK_X_INVERT ?
+			input_abs_get_max(input, ABS_MT_POSITION_X) - *slot->x :
+			*slot->x;
+		y = hdev->quirks & HID_QUIRK_Y_INVERT ?
+			input_abs_get_max(input, ABS_MT_POSITION_Y) - *slot->y :
+			*slot->y;
+		cx = hdev->quirks & HID_QUIRK_X_INVERT ?
+			input_abs_get_max(input, ABS_MT_POSITION_X) - *slot->cx :
+			*slot->cx;
+		cy = hdev->quirks & HID_QUIRK_Y_INVERT ?
+			input_abs_get_max(input, ABS_MT_POSITION_Y) - *slot->cy :
+			*slot->cy;
+
+		input_event(input, EV_ABS, ABS_MT_POSITION_X, x);
+		input_event(input, EV_ABS, ABS_MT_POSITION_Y, y);
+		input_event(input, EV_ABS, ABS_MT_TOOL_X, cx);
+		input_event(input, EV_ABS, ABS_MT_TOOL_Y, cy);
 		input_event(input, EV_ABS, ABS_MT_DISTANCE, !*slot->tip_state);
 		input_event(input, EV_ABS, ABS_MT_ORIENTATION, orientation);
 		input_event(input, EV_ABS, ABS_MT_PRESSURE, *slot->p);
@@ -1735,6 +1757,15 @@  static int mt_probe(struct hid_device *hdev, const struct hid_device_id *id)
 	if (id->vendor == HID_ANY_ID && id->product == HID_ANY_ID)
 		td->serial_maybe = true;

+
+	/* Orientation is inverted if the X or Y axes are
+	 * flipped, but normalized if both are inverted.
+	 */
+	if (hdev->quirks & (HID_QUIRK_X_INVERT | HID_QUIRK_Y_INVERT) &&
+	    !((hdev->quirks & HID_QUIRK_X_INVERT)
+	      && (hdev->quirks & HID_QUIRK_Y_INVERT)))
+		td->mtclass.quirks = MT_QUIRK_ORIENTATION_INVERT;
+
 	/* This allows the driver to correctly support devices
 	 * that emit events over several HID messages.
 	 */
diff --git a/drivers/hid/hid-quirks.c b/drivers/hid/hid-quirks.c
index 0e9702c7f7d6c..78452faf3c9b4 100644
--- a/drivers/hid/hid-quirks.c
+++ b/drivers/hid/hid-quirks.c
@@ -19,6 +19,7 @@ 
 #include <linux/input/elan-i2c-ids.h>

 #include "hid-ids.h"
+#include "i2c-hid/i2c-hid.h"

 /*
  * Alphabetically sorted by vendor then product.
@@ -1298,6 +1299,11 @@  unsigned long hid_lookup_quirk(const struct hid_device *hdev)
 		quirks = hid_gets_squirk(hdev);
 	mutex_unlock(&dquirks_lock);

+	/* Get quirks specific to I2C devices */
+	if (IS_ENABLED(CONFIG_I2C_DMI_CORE) && IS_ENABLED(CONFIG_DMI) &&
+	    hdev->bus == BUS_I2C)
+		quirks |= i2c_hid_get_dmi_quirks(hdev->vendor, hdev->product);
+
 	return quirks;
 }
 EXPORT_SYMBOL_GPL(hid_lookup_quirk);
diff --git a/drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c b/drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c
index 8e0f67455c098..554a7dc285365 100644
--- a/drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c
+++ b/drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c
@@ -10,8 +10,10 @@ 
 #include <linux/types.h>
 #include <linux/dmi.h>
 #include <linux/mod_devicetable.h>
+#include <linux/hid.h>

 #include "i2c-hid.h"
+#include "../hid-ids.h"


 struct i2c_hid_desc_override {
@@ -416,6 +418,28 @@  static const struct dmi_system_id i2c_hid_dmi_desc_override_table[] = {
 	{ }	/* Terminate list */
 };

+static const struct hid_device_id i2c_hid_elan_flipped_quirks = {
+	HID_DEVICE(BUS_I2C, HID_GROUP_MULTITOUCH_WIN_8, USB_VENDOR_ID_ELAN, 0x2dcd),
+		HID_QUIRK_X_INVERT | HID_QUIRK_Y_INVERT
+};
+
+/*
+ * This list contains devices which have specific issues based on the system
+ * they're on and not just the device itself. The driver_data will have a
+ * specific hid device to match against.
+ */
+static const struct dmi_system_id i2c_hid_dmi_quirk_table[] = {
+	{
+		.ident = "DynaBook K50/FR",
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Dynabook Inc."),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "dynabook K50/FR"),
+		},
+		.driver_data = (void *)&i2c_hid_elan_flipped_quirks,
+	},
+	{ }	/* Terminate list */
+};
+

 struct i2c_hid_desc *i2c_hid_get_dmi_i2c_hid_desc_override(uint8_t *i2c_name)
 {
@@ -450,3 +474,22 @@  char *i2c_hid_get_dmi_hid_report_desc_override(uint8_t *i2c_name,
 	*size = override->hid_report_desc_size;
 	return override->hid_report_desc;
 }
+
+u32 i2c_hid_get_dmi_quirks(const u16 vendor, const u16 product)
+{
+	u32 quirks = 0;
+	const struct dmi_system_id *system_id =
+			dmi_first_match(i2c_hid_dmi_quirk_table);
+
+	if (system_id) {
+		const struct hid_device_id *device_id =
+				(struct hid_device_id *)(system_id->driver_data);
+
+		if (device_id && device_id->vendor == vendor &&
+		    device_id->product == product)
+			quirks = device_id->driver_data;
+	}
+
+	return quirks;
+}
+EXPORT_SYMBOL_GPL(i2c_hid_get_dmi_quirks);
diff --git a/drivers/hid/i2c-hid/i2c-hid.h b/drivers/hid/i2c-hid/i2c-hid.h
index 96c75510ad3f1..2c7b66d5caa0f 100644
--- a/drivers/hid/i2c-hid/i2c-hid.h
+++ b/drivers/hid/i2c-hid/i2c-hid.h
@@ -9,6 +9,7 @@ 
 struct i2c_hid_desc *i2c_hid_get_dmi_i2c_hid_desc_override(uint8_t *i2c_name);
 char *i2c_hid_get_dmi_hid_report_desc_override(uint8_t *i2c_name,
 					       unsigned int *size);
+u32 i2c_hid_get_dmi_quirks(const u16 vendor, const u16 product);
 #else
 static inline struct i2c_hid_desc
 		   *i2c_hid_get_dmi_i2c_hid_desc_override(uint8_t *i2c_name)
@@ -16,6 +17,8 @@  static inline struct i2c_hid_desc
 static inline char *i2c_hid_get_dmi_hid_report_desc_override(uint8_t *i2c_name,
 							     unsigned int *size)
 { return NULL; }
+static inline u32 i2c_hid_get_dmi_quirks(const u16 vendor, const u16 product)
+{ return 0; }
 #endif

 /**