diff mbox series

[1/2] HID: core: Provide new max_buffer_size attribute to over-ride the default

Message ID 20230113150557.1308176-1-lee@kernel.org (mailing list archive)
State Superseded
Headers show
Series [1/2] HID: core: Provide new max_buffer_size attribute to over-ride the default | expand

Commit Message

Lee Jones Jan. 13, 2023, 3:05 p.m. UTC
Presently, when a report is processed, its size is compared solely
against the value specified by user-space.  If the received report ends
up being smaller than this, the remainder of the buffer is zeroed.  That
is, the space between sizeof(csize) (size of the current report) and the
rsize (size provided by the user - i.e. Report Size * Report Count),
which can be handled up to HID_MAX_BUFFER_SIZE (16k).

This is an issue.  In the case of some low-level drivers, the buffers
are significantly smaller than the default 16k.  For instance, in the
case of uhid, the data buffer is a mere UHID_DATA_MAX (4k).  Meaning
that memset() shoots straight past the end of the buffer boundary and
starts zeroing out in-use values, often resulting in calamity.

This patch introduces a new variable into 'struct hid_ll_driver' where
individual low-level drivers can over-ride the default maximum value of
HID_MAX_BUFFER_SIZE (16k) with something more sympathetic to the
interface.

Signed-off-by: Lee Jones <lee@kernel.org>
---
 drivers/hid/hid-core.c | 32 +++++++++++++++++++++++++-------
 include/linux/hid.h    |  3 +++
 2 files changed, 28 insertions(+), 7 deletions(-)

Comments

Jiri Kosina Jan. 18, 2023, 9:03 a.m. UTC | #1
On Fri, 13 Jan 2023, Lee Jones wrote:

> Presently, when a report is processed, its size is compared solely 
> against the value specified by user-space.  

While I am generally fine with the idea, I don't understand this sentence. 
What exactly do you mean by 'specified by user-space'? It's defined as a 
compile-time constant.

Thanks,
Lee Jones Jan. 18, 2023, 11:09 a.m. UTC | #2
On Wed, 18 Jan 2023, Jiri Kosina wrote:

> On Fri, 13 Jan 2023, Lee Jones wrote:
> 
> > Presently, when a report is processed, its size is compared solely 
> > against the value specified by user-space.  
> 
> While I am generally fine with the idea, I don't understand this sentence. 
> What exactly do you mean by 'specified by user-space'? It's defined as a 
> compile-time constant.
> 
> > If the received report ends up being smaller than this, the
> > remainder of the buffer is zeroed. 

Apologies for any ambiguity.

"its size" == "compile-time constant"

Would "its maximum size" read better?

These sentences are an attempt to describe this statement:

    if (csize < rsize) {
        dbg_hid("report %d is too short, (%d < %d)\n", report->id,
            csize, rsize);
        memset(cdata + csize, 0, rsize - csize);
    }

Where csize is "the [size of the] received report" and rsize is the
"value [size] specified by user-space".  Thus, if user-space says the
report will be 8-Bytes (rsize) and it actually only only submits 6-Bytes
(csize), then the subsystem will complain that the "report is too short"
and it will attempt to zero the seemingly unused 2-Bytes.
Jiri Kosina Jan. 18, 2023, 2:55 p.m. UTC | #3
On Wed, 18 Jan 2023, Lee Jones wrote:

> > > Presently, when a report is processed, its size is compared solely 
> > > against the value specified by user-space.  
> > 
> > While I am generally fine with the idea, I don't understand this sentence. 
> > What exactly do you mean by 'specified by user-space'? It's defined as a 
> > compile-time constant.
> > 
> > > If the received report ends up being smaller than this, the
> > > remainder of the buffer is zeroed. 
> 
> Apologies for any ambiguity.
> 
> "its size" == "compile-time constant"
> 
> Would "its maximum size" read better?

I think that the confusion comes from the fact that the changelog is 
written solely with the UHID usercase on mind ... ? (which is dealt with 
in the independent followup patch).

Thanks,
Lee Jones Jan. 18, 2023, 3:11 p.m. UTC | #4
On Wed, 18 Jan 2023, Jiri Kosina wrote:

> On Wed, 18 Jan 2023, Lee Jones wrote:
> 
> > > > Presently, when a report is processed, its size is compared solely 
> > > > against the value specified by user-space.  
> > > 
> > > While I am generally fine with the idea, I don't understand this sentence. 
> > > What exactly do you mean by 'specified by user-space'? It's defined as a 
> > > compile-time constant.
> > > 
> > > > If the received report ends up being smaller than this, the
> > > > remainder of the buffer is zeroed. 
> > 
> > Apologies for any ambiguity.
> > 
> > "its size" == "compile-time constant"
> > 
> > Would "its maximum size" read better?
> 
> I think that the confusion comes from the fact that the changelog is 
> written solely with the UHID usercase on mind ... ? (which is dealt with 
> in the independent followup patch).

Quite possibly, yes.  Since this is the way the bug was reported to me
and how I presently view it.  However, I suppose reports do not always
originate from user-space.  Good point.

How would you like me to move forward?  Would you like me to re-write
the commit log to be more generic?
diff mbox series

Patch

diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index bd47628da6be0..b10383ca8fc05 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -261,6 +261,7 @@  static int hid_add_field(struct hid_parser *parser, unsigned report_type, unsign
 {
 	struct hid_report *report;
 	struct hid_field *field;
+	unsigned int max_buffer_size = HID_MAX_BUFFER_SIZE;
 	unsigned int usages;
 	unsigned int offset;
 	unsigned int i;
@@ -291,8 +292,11 @@  static int hid_add_field(struct hid_parser *parser, unsigned report_type, unsign
 	offset = report->size;
 	report->size += parser->global.report_size * parser->global.report_count;
 
+	if (parser->device->ll_driver->max_buffer_size)
+		max_buffer_size = parser->device->ll_driver->max_buffer_size;
+
 	/* Total size check: Allow for possible report index byte */
-	if (report->size > (HID_MAX_BUFFER_SIZE - 1) << 3) {
+	if (report->size > (max_buffer_size - 1) << 3) {
 		hid_err(parser->device, "report is too long\n");
 		return -1;
 	}
@@ -1963,6 +1967,7 @@  int hid_report_raw_event(struct hid_device *hid, enum hid_report_type type, u8 *
 	struct hid_report_enum *report_enum = hid->report_enum + type;
 	struct hid_report *report;
 	struct hid_driver *hdrv;
+	int max_buffer_size = HID_MAX_BUFFER_SIZE;
 	u32 rsize, csize = size;
 	u8 *cdata = data;
 	int ret = 0;
@@ -1978,10 +1983,13 @@  int hid_report_raw_event(struct hid_device *hid, enum hid_report_type type, u8 *
 
 	rsize = hid_compute_report_size(report);
 
-	if (report_enum->numbered && rsize >= HID_MAX_BUFFER_SIZE)
-		rsize = HID_MAX_BUFFER_SIZE - 1;
-	else if (rsize > HID_MAX_BUFFER_SIZE)
-		rsize = HID_MAX_BUFFER_SIZE;
+	if (hid->ll_driver->max_buffer_size)
+		max_buffer_size = hid->ll_driver->max_buffer_size;
+
+	if (report_enum->numbered && rsize >= max_buffer_size)
+		rsize = max_buffer_size - 1;
+	else if (rsize > max_buffer_size)
+		rsize = max_buffer_size;
 
 	if (csize < rsize) {
 		dbg_hid("report %d is too short, (%d < %d)\n", report->id,
@@ -2384,7 +2392,12 @@  int hid_hw_raw_request(struct hid_device *hdev,
 		       unsigned char reportnum, __u8 *buf,
 		       size_t len, enum hid_report_type rtype, enum hid_class_request reqtype)
 {
-	if (len < 1 || len > HID_MAX_BUFFER_SIZE || !buf)
+	unsigned int max_buffer_size = HID_MAX_BUFFER_SIZE;
+
+	if (hdev->ll_driver->max_buffer_size)
+		max_buffer_size = hdev->ll_driver->max_buffer_size;
+
+	if (len < 1 || len > max_buffer_size || !buf)
 		return -EINVAL;
 
 	return hdev->ll_driver->raw_request(hdev, reportnum, buf, len,
@@ -2403,7 +2416,12 @@  EXPORT_SYMBOL_GPL(hid_hw_raw_request);
  */
 int hid_hw_output_report(struct hid_device *hdev, __u8 *buf, size_t len)
 {
-	if (len < 1 || len > HID_MAX_BUFFER_SIZE || !buf)
+	unsigned int max_buffer_size = HID_MAX_BUFFER_SIZE;
+
+	if (hdev->ll_driver->max_buffer_size)
+		max_buffer_size = hdev->ll_driver->max_buffer_size;
+
+	if (len < 1 || len > max_buffer_size || !buf)
 		return -EINVAL;
 
 	if (hdev->ll_driver->output_report)
diff --git a/include/linux/hid.h b/include/linux/hid.h
index 8677ae38599e4..f9b500b26f67c 100644
--- a/include/linux/hid.h
+++ b/include/linux/hid.h
@@ -826,6 +826,7 @@  struct hid_driver {
  * @output_report: send output report to device
  * @idle: send idle request to device
  * @may_wakeup: return if device may act as a wakeup source during system-suspend
+ * @max_buffer_size: over-ride maximum data buffer size (default: HID_MAX_BUFFER_SIZE)
  */
 struct hid_ll_driver {
 	int (*start)(struct hid_device *hdev);
@@ -851,6 +852,8 @@  struct hid_ll_driver {
 
 	int (*idle)(struct hid_device *hdev, int report, int idle, int reqtype);
 	bool (*may_wakeup)(struct hid_device *hdev);
+
+	unsigned int max_buffer_size;
 };
 
 extern struct hid_ll_driver i2c_hid_ll_driver;