Message ID | 20230206184744.7.I2d960ed7f2445db0cf3d227fde985fbd740f3c4d@changeid (mailing list archive) |
---|---|
State | Mainlined |
Commit | ef29188fe0b4de5c04b833378db92d3a3e0709e8 |
Headers | show |
Series | arm: qcom: Fix touchscreen voltage for sc7280-herobrine boards | expand |
On Mon, Feb 06, 2023 at 06:48:16PM -0800, Douglas Anderson wrote: > On older revisions of evoker, the touchscreen was either > non-functional or needed special hardware magic to get it talking > properly. It's been decided that the proper way going forward is to > use L3C to power some buffers on the QCard and then configure the > touchscreens for 1.8V. Let's do that. > > Note that this is safe to do even on older revs even if it might not > make the touchscreen work there (because they didn't have a properly > stuffed QCard). As talked about in the patch ("arm64: dts: qcom: > sc7280: On QCard, regulator L3C should be 1.8V") the L3C regulator > didn't go anywhere at all on older revs. > > This patch relies on the patch ("HID: i2c-hid: goodix: Add > mainboard-vddio-supply") in order to function properly. Without that > patch this one won't do any harm but it won't actually accomplish its > goal. > > Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker.dtsi index 3d639c70a06e..0add7a2a099c 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker.dtsi @@ -55,6 +55,7 @@ ap_ts: touchscreen@5d { reset-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>; vdd-supply = <&ts_avdd>; + mainboard-vddio-supply = <&ts_avccio>; }; };
On older revisions of evoker, the touchscreen was either non-functional or needed special hardware magic to get it talking properly. It's been decided that the proper way going forward is to use L3C to power some buffers on the QCard and then configure the touchscreens for 1.8V. Let's do that. Note that this is safe to do even on older revs even if it might not make the touchscreen work there (because they didn't have a properly stuffed QCard). As talked about in the patch ("arm64: dts: qcom: sc7280: On QCard, regulator L3C should be 1.8V") the L3C regulator didn't go anywhere at all on older revs. This patch relies on the patch ("HID: i2c-hid: goodix: Add mainboard-vddio-supply") in order to function properly. Without that patch this one won't do any harm but it won't actually accomplish its goal. Signed-off-by: Douglas Anderson <dianders@chromium.org> --- I haven't yet received real hardware to test this on, but it's a very simple patch and, in the very least, highly unlikely to make anything worse. No real users have these boards yet. arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker.dtsi | 1 + 1 file changed, 1 insertion(+)