diff mbox series

[RFC,3/4] arm64: dts: apple: t8103: Add touchbar bindings

Message ID 20230223-z2-for-ml-v1-3-028f2b85dc15@gmail.com (mailing list archive)
State New, archived
Headers show
Series Driver for Apple Z2 touchscreens. | expand

Commit Message

Sasha Finkelstein via B4 Relay Feb. 24, 2023, 10:20 a.m. UTC
From: Sasha Finkelstein <fnkl.kernel@gmail.com>

Adds device tree entries for the touchbar digitizer

Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com>
---
 arch/arm64/boot/dts/apple/t8103-j293.dts | 20 ++++++++++++++++++++
 arch/arm64/boot/dts/apple/t8103.dtsi     | 12 ++++++++++++
 2 files changed, 32 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/apple/t8103-j293.dts b/arch/arm64/boot/dts/apple/t8103-j293.dts
index 151074109a11..c369493b1c06 100644
--- a/arch/arm64/boot/dts/apple/t8103-j293.dts
+++ b/arch/arm64/boot/dts/apple/t8103-j293.dts
@@ -15,6 +15,9 @@ 
 / {
 	compatible = "apple,j293", "apple,t8103", "apple,arm-platform";
 	model = "Apple MacBook Pro (13-inch, M1, 2020)";
+	aliases {
+		touchbar0 = &touchbar0;
+	};
 };
 
 &bluetooth0 {
@@ -25,6 +28,23 @@  &wifi0 {
 	brcm,board-type = "apple,honshu";
 };
 
+&spi0 {
+	status = "okay";
+
+	touchbar0: touchbar@0 {
+		compatible = "apple,z2-touchscreen";
+		reg = <0>;
+		spi-max-frequency = <11500000>;
+		reset-gpios = <&pinctrl_ap 139 0>;
+		cs-gpios = <&pinctrl_ap 109 0>;
+		interrupts-extended = <&pinctrl_ap 194 IRQ_TYPE_EDGE_FALLING>;
+		firmware-name = "apple/dfrmtfw-j293.bin";
+		touchscreen-size-x = <23045>;
+		touchscreen-size-y = <640>;
+		apple,z2-device-name = "MacBookPro17,1 Touch Bar";
+	};
+};
+
 /*
  * Remove unused PCIe ports and disable the associated DARTs.
  */
diff --git a/arch/arm64/boot/dts/apple/t8103.dtsi b/arch/arm64/boot/dts/apple/t8103.dtsi
index 9859219699f4..70d3183f72bf 100644
--- a/arch/arm64/boot/dts/apple/t8103.dtsi
+++ b/arch/arm64/boot/dts/apple/t8103.dtsi
@@ -432,6 +432,18 @@  i2c4: i2c@235020000 {
 			status = "disabled"; /* only used in J293 */
 		};
 
+		spi0: spi@235100000 {
+			compatible = "apple,t8103-spi", "apple,spi";
+			reg = <0x2 0x35100000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 614 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_200m>;
+			power-domains = <&ps_spi0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled"; /* only used in J293 */
+		};
+
 		serial0: serial@235200000 {
 			compatible = "apple,s5l-uart";
 			reg = <0x2 0x35200000 0x0 0x1000>;