[v7,1/3] dt-bindings: i2c: Add CP2112 HID USB to SMBus Bridge

Commit Message

Daniel Kaehn Feb. 23, 2023, 9:31 p.m. UTC

This is a USB HID device which includes an I2C controller and 8 GPIO pins.

The binding allows describing the chip's gpio and i2c controller in DT
using the subnodes named "gpio" and "i2c", respectively. This is
intended to be used in configurations where the CP2112 is permanently
connected in hardware.

Signed-off-by: Danny Kaehn <[e-mail]>
---
 .../bindings/i2c/silabs,cp2112.yaml           | 113 ++++++++++++++++++
 1 file changed, 113 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/i2c/silabs,cp2112.yaml

Patch

diff --git a/Documentation/devicetree/bindings/i2c/silabs,cp2112.yaml b/Documentation/devicetree/bindings/i2c/silabs,cp2112.yaml
new file mode 100644
index 000000000000..a27509627804
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/silabs,cp2112.yaml
@@ -0,0 +1,113 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/silabs,cp2112.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: CP2112 HID USB to SMBus/I2C Bridge
+
+maintainers:
+  - Danny Kaehn <[e-mail]>
+
+description:
+  The CP2112 is a USB HID device which includes an integrated I2C controller
+  and 8 GPIO pins. Its GPIO pins can each be configured as inputs, open-drain
+  outputs, or push-pull outputs.
+
+properties:
+  compatible:
+    const: usb10c4,ea90
+
+  reg:
+    maxItems: 1
+    description: The USB port number on the host controller
+
+  i2c:
+    description: The SMBus/I2C controller node for the CP2112
+    $ref: /schemas/i2c/i2c-controller.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      sda-gpios:
+        maxItems: 1
+
+      scl-gpios:
+        maxItems: 1
+
+      clock-frequency:
+        minimum: 10000
+        default: 100000
+        maximum: 400000
+
+  gpio:
+    description: The GPIO controller node for the CP2112
+    type: object
+    unevaluatedProperties: false
+
+    properties:
+      interrupt-controller: true
+      "#interrupt-cells":
+        const: 2
+
+      gpio-controller: true
+      "#gpio-cells":
+        const: 2
+
+      gpio-line-names:
+        minItems: 1
+        maxItems: 8
+
+    patternProperties:
+      "-hog(-[0-9]+)?$":
+        type: object
+
+        required:
+          - gpio-hog
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    usb {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      device@1 {
+        compatible = "usb10c4,ea90";
+        reg = <1>;
+
+        i2c {
+          #address-cells = <1>;
+          #size-cells = <0>;
+          sda-gpios = <&cp2112_gpio 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+          scl-gpios = <&cp2112_gpio 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+          temp@48 {
+            compatible = "national,lm75";
+            reg = <0x48>;
+          };
+        };
+
+        cp2112_gpio: gpio {
+          gpio-controller;
+          interrupt-controller;
+          #gpio-cells = <2>;
+          gpio-line-names = "CP2112_SDA", "CP2112_SCL", "TEST2",
+            "TEST3","TEST4", "TEST5", "TEST6";
+
+          fan-rst-hog {
+              gpio-hog;
+              gpios = <7 GPIO_ACTIVE_HIGH>;
+              output-high;
+              line-name = "FAN_RST";
+          };
+        };
+      };
+    };