diff mbox series

[v2] input: touchscreen: goodix: Hold controller in reset during suspend

Message ID 20230311131534.484700-1-jajadekroon@gmail.com (mailing list archive)
State New, archived
Headers show
Series [v2] input: touchscreen: goodix: Hold controller in reset during suspend | expand

Commit Message

Jan Jasper de Kroon March 11, 2023, 1:15 p.m. UTC 
From: Ondřej Jirman <megi@xff.cz>

The Goodix touchscreen controller used in PinePhone is not properly
suspended during system sleep, leading to high power consumption. This
commit modifies the driver to hold the controller in reset during
system sleep, reducing power consumption by around 40mW.

The original patch also disabled the regulators during system sleep, but
this could cause issues with other peripherals attached to the same power
supplies. Hence, this commit only holds the controller in reset during
system sleep and does not attempt to power it off.

A separate commit adds a new device tree property "hold-in-reset-in-suspend"
to control the hold-in-reset behavior of the controller during system sleep.

Signed-off-by: Ondrej Jirman <megi@xff.cz>
Signed-off-by: Jan Jasper de Kroon <jajadekroon@gmail.com>
---
V1 -> V2: Rewrote the commit message and function name to better reflect it's behavior.

 drivers/input/touchscreen/goodix.c | 23 +++++++++++++++++++++++
 drivers/input/touchscreen/goodix.h |  1 +
 2 files changed, 24 insertions(+)

Comments

Jarrah March 13, 2023, 12:44 a.m. UTC | #1 
On 3/12/23 00:15, Jan Jasper de Kroon wrote:
> From: Ondřej Jirman <megi@xff.cz>
>
> The Goodix touchscreen controller used in PinePhone is not properly
> suspended during system sleep, leading to high power consumption. This
> commit modifies the driver to hold the controller in reset during
> system sleep, reducing power consumption by around 40mW.
>
> The original patch also disabled the regulators during system sleep, but
> this could cause issues with other peripherals attached to the same power
> supplies. Hence, this commit only holds the controller in reset during
> system sleep and does not attempt to power it off.
>
> A separate commit adds a new device tree property "hold-in-reset-in-suspend"
> to control the hold-in-reset behavior of the controller during system sleep.
>
> Signed-off-by: Ondrej Jirman <megi@xff.cz>
> Signed-off-by: Jan Jasper de Kroon <jajadekroon@gmail.com>


Tested-by: Jarrah Gosbell <kernel@undef.tools>


Thank you for upstreaming these,

Jarrah.
diff mbox series

Patch

diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c
index b348172f19c3..a35a203e04bf 100644
--- a/drivers/input/touchscreen/goodix.c
+++ b/drivers/input/touchscreen/goodix.c
@@ -1284,6 +1284,7 @@  static void goodix_disable_regulators(void *arg)
 
 static int goodix_ts_probe(struct i2c_client *client)
 {
+	struct device_node *np = client->dev.of_node;
 	struct goodix_ts_data *ts;
 	const char *cfg_name;
 	int error;
@@ -1303,6 +1304,7 @@  static int goodix_ts_probe(struct i2c_client *client)
 	i2c_set_clientdata(client, ts);
 	init_completion(&ts->firmware_loading_complete);
 	ts->contact_size = GOODIX_CONTACT_SIZE;
+	ts->hold_in_reset_in_suspend = of_property_read_bool(np, "hold-in-reset-in-suspend");
 
 	error = goodix_get_gpio_config(ts);
 	if (error)
@@ -1410,6 +1412,13 @@  static int goodix_suspend(struct device *dev)
 	if (ts->load_cfg_from_disk)
 		wait_for_completion(&ts->firmware_loading_complete);
 
+	if (ts->hold_in_reset_in_suspend) {
+		goodix_free_irq(ts);
+		goodix_irq_direction_output(ts, 0);
+		gpiod_direction_output(ts->gpiod_rst, 0);
+		return 0;
+	}
+
 	/* We need gpio pins to suspend/resume */
 	if (ts->irq_pin_access_method == IRQ_PIN_ACCESS_NONE) {
 		disable_irq(client->irq);
@@ -1455,6 +1464,20 @@  static int goodix_resume(struct device *dev)
 	u8 config_ver;
 	int error;
 
+	if (ts->hold_in_reset_in_suspend) {
+		error = goodix_reset(ts);
+		if (error) {
+			dev_err(dev, "Controller reset failed.\n");
+			return error;
+		}
+
+		error = goodix_request_irq(ts);
+		if (error)
+			return error;
+
+		return 0;
+	}
+
 	if (ts->irq_pin_access_method == IRQ_PIN_ACCESS_NONE) {
 		enable_irq(client->irq);
 		return 0;
diff --git a/drivers/input/touchscreen/goodix.h b/drivers/input/touchscreen/goodix.h
index 87797cc88b32..c515d03b742c 100644
--- a/drivers/input/touchscreen/goodix.h
+++ b/drivers/input/touchscreen/goodix.h
@@ -104,6 +104,7 @@  struct goodix_ts_data {
 	u8 main_clk[GOODIX_MAIN_CLK_LEN];
 	int bak_ref_len;
 	u8 *bak_ref;
+	bool hold_in_reset_in_suspend;
 };
 
 int goodix_i2c_read(struct i2c_client *client, u16 reg, u8 *buf, int len);