| Message ID | 20230424123522.18302-27-nikita.shubin@maquefel.me (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | ep93xx device tree conversion | expand |
On Mon, Apr 24, 2023 at 03:34:42PM +0300, Nikita Shubin wrote: > Add YAML bindings ep93xx SoC. > > Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me> > --- > > Notes: > Linus Walleij: > - replaced hex with proper <KEY_UP>, etc > > .../bindings/input/cirrus,ep93xx-keypad.yaml | 123 ++++++++++++++++++ > 1 file changed, 123 insertions(+) > create mode 100644 Documentation/devicetree/bindings/input/cirrus,ep93xx-keypad.yaml > > diff --git a/Documentation/devicetree/bindings/input/cirrus,ep93xx-keypad.yaml b/Documentation/devicetree/bindings/input/cirrus,ep93xx-keypad.yaml > new file mode 100644 > index 000000000000..0310114de22e > --- /dev/null > +++ b/Documentation/devicetree/bindings/input/cirrus,ep93xx-keypad.yaml > @@ -0,0 +1,123 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/input/cirrus,ep93xx-keypad.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Cirrus ep93xx keypad > + > +maintainers: > + - Dmitry Torokhov <dmitry.torokhov@gmail.com> > + - Alexander Sverdlin <alexander.sverdlin@gmail.com> > + > +allOf: > + - $ref: "/schemas/input/matrix-keymap.yaml#" Drop quotes. > + > +description: | > + The KPP is designed to interface with a keypad matrix with 2-point contact > + or 3-point contact keys. The KPP is designed to simplify the software task > + of scanning a keypad matrix. The KPP is capable of detecting, debouncing, > + and decoding one or multiple keys pressed simultaneously on a keypad. > + > +properties: > + compatible: > + enum: > + - cirrus,ep9301-keypad > + > + reg: > + maxItems: 1 > + > + interrupts: > + maxItems: 1 > + > + clocks: > + maxItems: 1 > + > + clock-names: > + enum: > + - ep93xx-keypad > + > + debounce: I think we have a common property for this. > + description: | > + Time in microseconds that key must be pressed or > + released for state change interrupt to trigger. > + $ref: /schemas/types.yaml#/definitions/uint32 > + > + prescale: > + description: row/column counter pre-scaler load value > + $ref: /schemas/types.yaml#/definitions/uint32 constraints? Or 0-2^32 is valid? > + > + clk-rate: No, have standard bindings for this. > + description: clock rate setting > + $ref: /schemas/types.yaml#/definitions/uint32 > + > + disable-3-key: Needs a vendor prefix. > + type: boolean > + description: > + Disable 3 Key reset. Setting this disables the three key reset > + output to the watchdog reset block. > + > + diag-mode: Why do we need this in DT. Shouldn't this be a runtime setting. > + type: boolean > + description: > + Key scan diagnostic mode. Setting this allows key scanning to be > + directly controlled through the key register by writes from the > + ARM Core. > + > + back-drive: Needs a vendor prefix. > + type: boolean > + description: > + Key scan back driving enable. Setting this enables the key > + scanning logic to back drive the row and column pins of the > + chip high during the first two column counts in the > + row/column counter. > + > + test-mode: Why do we need this in DT. Shouldn't this be a runtime setting. > + type: boolean > + description: > + Test mode. When this is set, the counter RC_COUNT is advanced > + by 8 counts when EN is active. The effect is that only column 0 > + is checked in each row. This test mode allows a faster test > + of the ROW pins. > + > +required: > + - compatible > + - reg > + - interrupts > + - clocks > + - clock-names > + - linux,keymap > + > +unevaluatedProperties: false > + > +examples: > + - | > + #include <dt-bindings/clock/cirrus,ep93xx-clock.h> > + #include <dt-bindings/input/input.h> > + keypad@800f0000 { > + compatible = "cirrus,ep9301-keypad"; > + reg = <0x800f0000 0x0c>; > + interrupt-parent = <&vic0>; > + interrupts = <29>; > + clocks = <&syscon EP93XX_CLK_KEYPAD>; > + clock-names = "ep93xx-keypad"; > + pinctrl-names = "default"; > + pinctrl-0 = <&keypad_default_pins>; > + linux,keymap = <KEY_UP>, > + <KEY_DOWN>, > + <KEY_VOLUMEDOWN>, > + <KEY_HOME>, > + <KEY_RIGHT>, > + <KEY_LEFT>, > + <KEY_ENTER>, > + <KEY_VOLUMEUP>, > + <KEY_F6>, > + <KEY_F8>, > + <KEY_F9>, > + <KEY_F10>, > + <KEY_F1>, > + <KEY_F2>, > + <KEY_F3>, > + <KEY_POWER>; > + }; > + > -- > 2.39.2 >
diff --git a/Documentation/devicetree/bindings/input/cirrus,ep93xx-keypad.yaml b/Documentation/devicetree/bindings/input/cirrus,ep93xx-keypad.yaml new file mode 100644 index 000000000000..0310114de22e --- /dev/null +++ b/Documentation/devicetree/bindings/input/cirrus,ep93xx-keypad.yaml @@ -0,0 +1,123 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/cirrus,ep93xx-keypad.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cirrus ep93xx keypad + +maintainers: + - Dmitry Torokhov <dmitry.torokhov@gmail.com> + - Alexander Sverdlin <alexander.sverdlin@gmail.com> + +allOf: + - $ref: "/schemas/input/matrix-keymap.yaml#" + +description: | + The KPP is designed to interface with a keypad matrix with 2-point contact + or 3-point contact keys. The KPP is designed to simplify the software task + of scanning a keypad matrix. The KPP is capable of detecting, debouncing, + and decoding one or multiple keys pressed simultaneously on a keypad. + +properties: + compatible: + enum: + - cirrus,ep9301-keypad + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + enum: + - ep93xx-keypad + + debounce: + description: | + Time in microseconds that key must be pressed or + released for state change interrupt to trigger. + $ref: /schemas/types.yaml#/definitions/uint32 + + prescale: + description: row/column counter pre-scaler load value + $ref: /schemas/types.yaml#/definitions/uint32 + + clk-rate: + description: clock rate setting + $ref: /schemas/types.yaml#/definitions/uint32 + + disable-3-key: + type: boolean + description: + Disable 3 Key reset. Setting this disables the three key reset + output to the watchdog reset block. + + diag-mode: + type: boolean + description: + Key scan diagnostic mode. Setting this allows key scanning to be + directly controlled through the key register by writes from the + ARM Core. + + back-drive: + type: boolean + description: + Key scan back driving enable. Setting this enables the key + scanning logic to back drive the row and column pins of the + chip high during the first two column counts in the + row/column counter. + + test-mode: + type: boolean + description: + Test mode. When this is set, the counter RC_COUNT is advanced + by 8 counts when EN is active. The effect is that only column 0 + is checked in each row. This test mode allows a faster test + of the ROW pins. + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - linux,keymap + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/cirrus,ep93xx-clock.h> + #include <dt-bindings/input/input.h> + keypad@800f0000 { + compatible = "cirrus,ep9301-keypad"; + reg = <0x800f0000 0x0c>; + interrupt-parent = <&vic0>; + interrupts = <29>; + clocks = <&syscon EP93XX_CLK_KEYPAD>; + clock-names = "ep93xx-keypad"; + pinctrl-names = "default"; + pinctrl-0 = <&keypad_default_pins>; + linux,keymap = <KEY_UP>, + <KEY_DOWN>, + <KEY_VOLUMEDOWN>, + <KEY_HOME>, + <KEY_RIGHT>, + <KEY_LEFT>, + <KEY_ENTER>, + <KEY_VOLUMEUP>, + <KEY_F6>, + <KEY_F8>, + <KEY_F9>, + <KEY_F10>, + <KEY_F1>, + <KEY_F2>, + <KEY_F3>, + <KEY_POWER>; + }; +
Add YAML bindings ep93xx SoC. Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me> --- Notes: Linus Walleij: - replaced hex with proper <KEY_UP>, etc .../bindings/input/cirrus,ep93xx-keypad.yaml | 123 ++++++++++++++++++ 1 file changed, 123 insertions(+) create mode 100644 Documentation/devicetree/bindings/input/cirrus,ep93xx-keypad.yaml