| Message ID | 20230427-hammerhead-vibra-v1-3-e87eeb94da51@z3ntu.xyz (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | bcf784985e35fc39d682f0dde750162e7f54a1f0 |
| Headers | show |
| Series | Add haptics support to Nexus 5 using pwm-vibra driver | expand |
On Thu, Apr 27, 2023 at 10:34:28PM +0200, Luca Weiss wrote: > Some pwm vibrators have a dedicated enable GPIO that needs to be set > high so that the vibrator works. Add support for that optionally. > > Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Hi Luca, Thank you for picking up this work! > + vibrator->enable_gpio = devm_gpiod_get_optional(&pdev->dev, "enable", > + GPIOD_OUT_LOW); > + err = PTR_ERR_OR_ZERO(vibrator->enable_gpio); > + if (err) { > + if (err != -EPROBE_DEFER) > + dev_err(&pdev->dev, "Failed to request enable gpio: %d\n", > + err); > + return err; > + } > + Take a look at dev_err_probe() to remove the -EPROBE_DEFER check. With that fixed: Reviewed-by: Brian Masney <bmasney@redhat.com>
On 27/04/2023 21:34, Luca Weiss wrote: > Some pwm vibrators have a dedicated enable GPIO that needs to be set > high so that the vibrator works. Add support for that optionally. > > Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org> > --- > drivers/input/misc/pwm-vibra.c | 16 ++++++++++++++++ > 1 file changed, 16 insertions(+) > > diff --git a/drivers/input/misc/pwm-vibra.c b/drivers/input/misc/pwm-vibra.c > index c08971c97ad6..2ba035299db8 100644 > --- a/drivers/input/misc/pwm-vibra.c > +++ b/drivers/input/misc/pwm-vibra.c > @@ -11,6 +11,7 @@ > * Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de> > */ > > +#include <linux/gpio/consumer.h> > #include <linux/input.h> > #include <linux/kernel.h> > #include <linux/module.h> > @@ -23,6 +24,7 @@ > > struct pwm_vibrator { > struct input_dev *input; > + struct gpio_desc *enable_gpio; > struct pwm_device *pwm; > struct pwm_device *pwm_dir; > struct regulator *vcc; > @@ -48,6 +50,8 @@ static int pwm_vibrator_start(struct pwm_vibrator *vibrator) > vibrator->vcc_on = true; > } > > + gpiod_set_value_cansleep(vibrator->enable_gpio, 1); > + > pwm_get_state(vibrator->pwm, &state); > pwm_set_relative_duty_cycle(&state, vibrator->level, 0xffff); > state.enabled = true; > @@ -80,6 +84,8 @@ static void pwm_vibrator_stop(struct pwm_vibrator *vibrator) > pwm_disable(vibrator->pwm_dir); > pwm_disable(vibrator->pwm); > > + gpiod_set_value_cansleep(vibrator->enable_gpio, 0); > + > if (vibrator->vcc_on) { > regulator_disable(vibrator->vcc); > vibrator->vcc_on = false; > @@ -142,6 +148,16 @@ static int pwm_vibrator_probe(struct platform_device *pdev) > return err; > } > > + vibrator->enable_gpio = devm_gpiod_get_optional(&pdev->dev, "enable", > + GPIOD_OUT_LOW); > + err = PTR_ERR_OR_ZERO(vibrator->enable_gpio); > + if (err) { > + if (err != -EPROBE_DEFER) > + dev_err(&pdev->dev, "Failed to request enable gpio: %d\n", > + err); > + return err; > + } > + > vibrator->pwm = devm_pwm_get(&pdev->dev, "enable"); > err = PTR_ERR_OR_ZERO(vibrator->pwm); > if (err) { >
On Freitag, 28. April 2023 01:29:27 CEST Brian Masney wrote: > On Thu, Apr 27, 2023 at 10:34:28PM +0200, Luca Weiss wrote: > > Some pwm vibrators have a dedicated enable GPIO that needs to be set > > high so that the vibrator works. Add support for that optionally. > > > > Signed-off-by: Luca Weiss <luca@z3ntu.xyz> > > Hi Luca, > > Thank you for picking up this work! > > > + vibrator->enable_gpio = devm_gpiod_get_optional(&pdev->dev, "enable", > > + GPIOD_OUT_LOW); > > + err = PTR_ERR_OR_ZERO(vibrator->enable_gpio); > > + if (err) { > > + if (err != -EPROBE_DEFER) > > + dev_err(&pdev->dev, "Failed to request enable gpio: %d\n", > > + err); > > + return err; > > + } > > + > > Take a look at dev_err_probe() to remove the -EPROBE_DEFER check. The input subsystem doesn't like dev_err_probe for some reason, you should quickly find examples of that being rejected on the mailing list (or see "git grep dev_err_probe drivers/input/") > > With that fixed: > > Reviewed-by: Brian Masney <bmasney@redhat.com> Thanks for the reviews!
On Fri, Apr 28, 2023 at 06:06:20PM +0200, Luca Weiss wrote: > On Freitag, 28. April 2023 01:29:27 CEST Brian Masney wrote: > > Take a look at dev_err_probe() to remove the -EPROBE_DEFER check. > > The input subsystem doesn't like dev_err_probe for some reason, you should > quickly find examples of that being rejected on the mailing list (or see > "git grep dev_err_probe drivers/input/") OK, that's fine then. Feel free to include my Reviewed-by. Brian
Hi, On Thu, Apr 27, 2023 at 10:34:28PM +0200, Luca Weiss wrote: > Some pwm vibrators have a dedicated enable GPIO that needs to be set > high so that the vibrator works. Add support for that optionally. > > Signed-off-by: Luca Weiss <luca@z3ntu.xyz> > --- Reviewed-by: Sebastian Reichel <sre@kernel.org> -- Sebastian > drivers/input/misc/pwm-vibra.c | 16 ++++++++++++++++ > 1 file changed, 16 insertions(+) > > diff --git a/drivers/input/misc/pwm-vibra.c b/drivers/input/misc/pwm-vibra.c > index c08971c97ad6..2ba035299db8 100644 > --- a/drivers/input/misc/pwm-vibra.c > +++ b/drivers/input/misc/pwm-vibra.c > @@ -11,6 +11,7 @@ > * Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de> > */ > > +#include <linux/gpio/consumer.h> > #include <linux/input.h> > #include <linux/kernel.h> > #include <linux/module.h> > @@ -23,6 +24,7 @@ > > struct pwm_vibrator { > struct input_dev *input; > + struct gpio_desc *enable_gpio; > struct pwm_device *pwm; > struct pwm_device *pwm_dir; > struct regulator *vcc; > @@ -48,6 +50,8 @@ static int pwm_vibrator_start(struct pwm_vibrator *vibrator) > vibrator->vcc_on = true; > } > > + gpiod_set_value_cansleep(vibrator->enable_gpio, 1); > + > pwm_get_state(vibrator->pwm, &state); > pwm_set_relative_duty_cycle(&state, vibrator->level, 0xffff); > state.enabled = true; > @@ -80,6 +84,8 @@ static void pwm_vibrator_stop(struct pwm_vibrator *vibrator) > pwm_disable(vibrator->pwm_dir); > pwm_disable(vibrator->pwm); > > + gpiod_set_value_cansleep(vibrator->enable_gpio, 0); > + > if (vibrator->vcc_on) { > regulator_disable(vibrator->vcc); > vibrator->vcc_on = false; > @@ -142,6 +148,16 @@ static int pwm_vibrator_probe(struct platform_device *pdev) > return err; > } > > + vibrator->enable_gpio = devm_gpiod_get_optional(&pdev->dev, "enable", > + GPIOD_OUT_LOW); > + err = PTR_ERR_OR_ZERO(vibrator->enable_gpio); > + if (err) { > + if (err != -EPROBE_DEFER) > + dev_err(&pdev->dev, "Failed to request enable gpio: %d\n", > + err); > + return err; > + } > + > vibrator->pwm = devm_pwm_get(&pdev->dev, "enable"); > err = PTR_ERR_OR_ZERO(vibrator->pwm); > if (err) { > > -- > 2.40.0 >
On Thu, Apr 27, 2023 at 10:34:28PM +0200, Luca Weiss wrote: > Some pwm vibrators have a dedicated enable GPIO that needs to be set > high so that the vibrator works. Add support for that optionally. So this is not simply a power supply in your case controlled by a GPIO? We truly can have both GPIO and a separate regulator? Thanks.
On 28.04.2023 18:06, Luca Weiss wrote: > On Freitag, 28. April 2023 01:29:27 CEST Brian Masney wrote: >> On Thu, Apr 27, 2023 at 10:34:28PM +0200, Luca Weiss wrote: >>> Some pwm vibrators have a dedicated enable GPIO that needs to be set >>> high so that the vibrator works. Add support for that optionally. >>> >>> Signed-off-by: Luca Weiss <luca@z3ntu.xyz> >> >> Hi Luca, >> >> Thank you for picking up this work! >> >>> + vibrator->enable_gpio = devm_gpiod_get_optional(&pdev->dev, > "enable", >>> + > GPIOD_OUT_LOW); >>> + err = PTR_ERR_OR_ZERO(vibrator->enable_gpio); >>> + if (err) { >>> + if (err != -EPROBE_DEFER) >>> + dev_err(&pdev->dev, "Failed to request enable > gpio: %d\n", >>> + err); >>> + return err; >>> + } >>> + >> Looks like your email client messes with the replies.. perhaps it tries to round them to n characters forcefully? Konrad >> Take a look at dev_err_probe() to remove the -EPROBE_DEFER check. > > The input subsystem doesn't like dev_err_probe for some reason, you should > quickly find examples of that being rejected on the mailing list (or see > "git grep dev_err_probe drivers/input/") > >> >> With that fixed: >> >> Reviewed-by: Brian Masney <bmasney@redhat.com> > > Thanks for the reviews! > >
On Dienstag, 2. Mai 2023 12:39:10 CEST Konrad Dybcio wrote: > On 28.04.2023 18:06, Luca Weiss wrote: > > On Freitag, 28. April 2023 01:29:27 CEST Brian Masney wrote: > >> On Thu, Apr 27, 2023 at 10:34:28PM +0200, Luca Weiss wrote: > >>> Some pwm vibrators have a dedicated enable GPIO that needs to be set > >>> high so that the vibrator works. Add support for that optionally. > >>> > >>> Signed-off-by: Luca Weiss <luca@z3ntu.xyz> > >> > >> Hi Luca, > >> > >> Thank you for picking up this work! > >> > >>> + vibrator->enable_gpio = devm_gpiod_get_optional(&pdev->dev, > > > > "enable", > > > >>> + > > > > GPIOD_OUT_LOW); > > > >>> + err = PTR_ERR_OR_ZERO(vibrator->enable_gpio); > >>> + if (err) { > >>> + if (err != -EPROBE_DEFER) > >>> + dev_err(&pdev->dev, "Failed to request enable > > > > gpio: %d\n", > > > >>> + err); > >>> + return err; > >>> + } > >>> + > > Looks like your email client messes with the replies.. perhaps it tries > to round them to n characters forcefully? Quite possible, I'm using KMail with Options -> Wordwrap turned on, otherwise I have to manually wrap everything but with this on there doesn't seem to be a way to get over that limit, even when posting links etc - or when quoting existing text. Regards Luca > > Konrad > > >> Take a look at dev_err_probe() to remove the -EPROBE_DEFER check. > > > > The input subsystem doesn't like dev_err_probe for some reason, you should > > quickly find examples of that being rejected on the mailing list (or see > > "git grep dev_err_probe drivers/input/") > > > >> With that fixed: > >> > >> Reviewed-by: Brian Masney <bmasney@redhat.com> > > > > Thanks for the reviews!
On Dienstag, 2. Mai 2023 02:47:29 CEST Dmitry Torokhov wrote: > On Thu, Apr 27, 2023 at 10:34:28PM +0200, Luca Weiss wrote: > > Some pwm vibrators have a dedicated enable GPIO that needs to be set > > high so that the vibrator works. Add support for that optionally. > > So this is not simply a power supply in your case controlled by a GPIO? > We truly can have both GPIO and a separate regulator? Yes it appears to be the EN pin on the ISA1000A, see https://electronics.stackexchange.com/q/380475 On apq8026-lg-lenok there is a similar setup for the vibration motor although there I don't know whether it's actually a fixed-regulator or not, but since the two devices were built in a similar time (without checking further) I could assume they both contain the same IC. Regards Luca > > Thanks.
diff --git a/drivers/input/misc/pwm-vibra.c b/drivers/input/misc/pwm-vibra.c index c08971c97ad6..2ba035299db8 100644 --- a/drivers/input/misc/pwm-vibra.c +++ b/drivers/input/misc/pwm-vibra.c @@ -11,6 +11,7 @@ * Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de> */ +#include <linux/gpio/consumer.h> #include <linux/input.h> #include <linux/kernel.h> #include <linux/module.h> @@ -23,6 +24,7 @@ struct pwm_vibrator { struct input_dev *input; + struct gpio_desc *enable_gpio; struct pwm_device *pwm; struct pwm_device *pwm_dir; struct regulator *vcc; @@ -48,6 +50,8 @@ static int pwm_vibrator_start(struct pwm_vibrator *vibrator) vibrator->vcc_on = true; } + gpiod_set_value_cansleep(vibrator->enable_gpio, 1); + pwm_get_state(vibrator->pwm, &state); pwm_set_relative_duty_cycle(&state, vibrator->level, 0xffff); state.enabled = true; @@ -80,6 +84,8 @@ static void pwm_vibrator_stop(struct pwm_vibrator *vibrator) pwm_disable(vibrator->pwm_dir); pwm_disable(vibrator->pwm); + gpiod_set_value_cansleep(vibrator->enable_gpio, 0); + if (vibrator->vcc_on) { regulator_disable(vibrator->vcc); vibrator->vcc_on = false; @@ -142,6 +148,16 @@ static int pwm_vibrator_probe(struct platform_device *pdev) return err; } + vibrator->enable_gpio = devm_gpiod_get_optional(&pdev->dev, "enable", + GPIOD_OUT_LOW); + err = PTR_ERR_OR_ZERO(vibrator->enable_gpio); + if (err) { + if (err != -EPROBE_DEFER) + dev_err(&pdev->dev, "Failed to request enable gpio: %d\n", + err); + return err; + } + vibrator->pwm = devm_pwm_get(&pdev->dev, "enable"); err = PTR_ERR_OR_ZERO(vibrator->pwm); if (err) {
Some pwm vibrators have a dedicated enable GPIO that needs to be set high so that the vibrator works. Add support for that optionally. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> --- drivers/input/misc/pwm-vibra.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)