| Message ID | 20230606-topic-goodix-berlin-upstream-initial-v1-3-4a0741b8aefd@linaro.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | input: touchscreen: add initial support for Goodix Berlin touchscreen IC | expand |
Hi Neil, Excellent work; just a few nits on this particular instance. On Tue, Jun 06, 2023 at 04:31:58PM +0200, Neil Armstrong wrote: > Add initial support for the new Goodix "Berlin" touchscreen ICs > over the I2C interface. > > This initial driver is derived from the Goodix goodix_ts_berlin > available at [1] and [2] and only supports the GT9916 IC > present on the Qualcomm SM8550 MTP & QRD touch panel. > > The current implementation only supports BerlinD, aka GT9916. > > [1] https://github.com/goodix/goodix_ts_berlin > [2] https://git.codelinaro.org/clo/la/platform/vendor/opensource/touch-drivers > > Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> > --- > drivers/input/touchscreen/Kconfig | 14 +++++ > drivers/input/touchscreen/Makefile | 1 + > drivers/input/touchscreen/goodix_berlin_i2c.c | 76 +++++++++++++++++++++++++++ > 3 files changed, 91 insertions(+) > > diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig > index 1a6f6f6da991..da6d5d75c42d 100644 > --- a/drivers/input/touchscreen/Kconfig > +++ b/drivers/input/touchscreen/Kconfig > @@ -421,6 +421,20 @@ config TOUCHSCREEN_GOODIX_BERLIN_CORE > depends on REGMAP > tristate > > +config TOUCHSCREEN_GOODIX_BERLIN_I2C > + tristate "Goodix Berlin I2C touchscreen" > + depends on I2C > + depends on REGMAP_I2C As you already depend upon REGMAP, I think you can simply select REGMAP_I2C here instead of depending upon it as well. > + select TOUCHSCREEN_GOODIX_BERLIN_CORE > + help > + Say Y here if you have the a touchscreen connected to your > + system using the Goodix Berlin IC connection via I2C. This language was a bit of a tongue-twister; perhaps it is better to say "...if you have a Goodix Berlin IC connected to your system via I2C." > + > + If unsure, say N. > + > + To compile this driver as a module, choose M here: the > + module will be called goodix_berlin_i2c. > + > config TOUCHSCREEN_HIDEEP > tristate "HiDeep Touch IC" > depends on I2C > diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile > index 29cdb042e104..921a2da0c2be 100644 > --- a/drivers/input/touchscreen/Makefile > +++ b/drivers/input/touchscreen/Makefile > @@ -48,6 +48,7 @@ obj-$(CONFIG_TOUCHSCREEN_EXC3000) += exc3000.o > obj-$(CONFIG_TOUCHSCREEN_FUJITSU) += fujitsu_ts.o > obj-$(CONFIG_TOUCHSCREEN_GOODIX) += goodix_ts.o > obj-$(CONFIG_TOUCHSCREEN_GOODIX_BERLIN_CORE) += goodix_berlin_core.o > +obj-$(CONFIG_TOUCHSCREEN_GOODIX_BERLIN_I2C) += goodix_berlin_i2c.o > obj-$(CONFIG_TOUCHSCREEN_HIDEEP) += hideep.o > obj-$(CONFIG_TOUCHSCREEN_HYNITRON_CSTXXX) += hynitron_cstxxx.o > obj-$(CONFIG_TOUCHSCREEN_ILI210X) += ili210x.o > diff --git a/drivers/input/touchscreen/goodix_berlin_i2c.c b/drivers/input/touchscreen/goodix_berlin_i2c.c > new file mode 100644 > index 000000000000..fc32b8077287 > --- /dev/null > +++ b/drivers/input/touchscreen/goodix_berlin_i2c.c > @@ -0,0 +1,76 @@ > +// SPDX-License-Identifier: GPL-2.0-or-later > +/* > + * Goodix Berlin Touchscreen Driver > + * > + * Copyright (C) 2020 - 2021 Goodix, Inc. > + * Copyright (C) 2023 Linaro Ltd. > + * > + * Based on goodix_ts_berlin driver. > + */ > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/i2c.h> > +#include <linux/regmap.h> > +#include <asm/unaligned.h> This last include does not seem to provide anything. > + > +#include "goodix_berlin.h" > + > +#define I2C_MAX_TRANSFER_SIZE 256 > + > +static const struct regmap_config goodix_berlin_i2c_regmap_conf = { > + .reg_bits = 32, > + .val_bits = 8, > + .max_raw_read = I2C_MAX_TRANSFER_SIZE, > + .max_raw_write = I2C_MAX_TRANSFER_SIZE, > +}; > + > +static const struct input_id goodix_berlin_i2c_input_id = { > + .bustype = BUS_I2C, > + .vendor = 0x0416, > + .product = 0x1001, > +}; > + > +static int goodix_berlin_i2c_probe(struct i2c_client *client) > +{ > + struct regmap *map; 'regmap' tends to be more common than simply 'map'. > + > + map = devm_regmap_init_i2c(client, &goodix_berlin_i2c_regmap_conf); > + if (IS_ERR(map)) > + return PTR_ERR(map); > + > + return goodix_berlin_probe(&client->dev, client->irq, > + &goodix_berlin_i2c_input_id, map); > +} > + > +static void goodix_berlin_i2c_remove(struct i2c_client *client) > +{ > + goodix_berlin_remove(&client->dev); > +} > + > +static const struct i2c_device_id goodix_berlin_i2c_id[] = { > + { "gt9916", 0 }, > + { } > +}; > + > +MODULE_DEVICE_TABLE(i2c, goodix_berlin_i2c_id); > + > +static const struct of_device_id goodix_berlin_i2c_of_match[] = { > + { .compatible = "goodix,gt9916", }, > + { }, No need for a trailing comma following the sentinel. > +}; > + > +static struct i2c_driver goodix_berlin_i2c_driver = { > + .driver = { > + .name = "goodix-berlin-i2c", > + .of_match_table = goodix_berlin_i2c_of_match, > + .pm = pm_sleep_ptr(&goodix_berlin_pm_ops), > + }, > + .probe = goodix_berlin_i2c_probe, > + .remove = goodix_berlin_i2c_remove, > + .id_table = goodix_berlin_i2c_id, > +}; > +module_i2c_driver(goodix_berlin_i2c_driver); > + > +MODULE_LICENSE("GPL"); > +MODULE_DESCRIPTION("Goodix Berlin I2C Touchscreen driver"); > +MODULE_AUTHOR("Neil Armstrong <neil.armstrong@linaro.org>"); > > -- > 2.34.1 > Kind regards, Jeff LaBundy
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 1a6f6f6da991..da6d5d75c42d 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -421,6 +421,20 @@ config TOUCHSCREEN_GOODIX_BERLIN_CORE depends on REGMAP tristate +config TOUCHSCREEN_GOODIX_BERLIN_I2C + tristate "Goodix Berlin I2C touchscreen" + depends on I2C + depends on REGMAP_I2C + select TOUCHSCREEN_GOODIX_BERLIN_CORE + help + Say Y here if you have the a touchscreen connected to your + system using the Goodix Berlin IC connection via I2C. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called goodix_berlin_i2c. + config TOUCHSCREEN_HIDEEP tristate "HiDeep Touch IC" depends on I2C diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 29cdb042e104..921a2da0c2be 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -48,6 +48,7 @@ obj-$(CONFIG_TOUCHSCREEN_EXC3000) += exc3000.o obj-$(CONFIG_TOUCHSCREEN_FUJITSU) += fujitsu_ts.o obj-$(CONFIG_TOUCHSCREEN_GOODIX) += goodix_ts.o obj-$(CONFIG_TOUCHSCREEN_GOODIX_BERLIN_CORE) += goodix_berlin_core.o +obj-$(CONFIG_TOUCHSCREEN_GOODIX_BERLIN_I2C) += goodix_berlin_i2c.o obj-$(CONFIG_TOUCHSCREEN_HIDEEP) += hideep.o obj-$(CONFIG_TOUCHSCREEN_HYNITRON_CSTXXX) += hynitron_cstxxx.o obj-$(CONFIG_TOUCHSCREEN_ILI210X) += ili210x.o diff --git a/drivers/input/touchscreen/goodix_berlin_i2c.c b/drivers/input/touchscreen/goodix_berlin_i2c.c new file mode 100644 index 000000000000..fc32b8077287 --- /dev/null +++ b/drivers/input/touchscreen/goodix_berlin_i2c.c @@ -0,0 +1,76 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Goodix Berlin Touchscreen Driver + * + * Copyright (C) 2020 - 2021 Goodix, Inc. + * Copyright (C) 2023 Linaro Ltd. + * + * Based on goodix_ts_berlin driver. + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/regmap.h> +#include <asm/unaligned.h> + +#include "goodix_berlin.h" + +#define I2C_MAX_TRANSFER_SIZE 256 + +static const struct regmap_config goodix_berlin_i2c_regmap_conf = { + .reg_bits = 32, + .val_bits = 8, + .max_raw_read = I2C_MAX_TRANSFER_SIZE, + .max_raw_write = I2C_MAX_TRANSFER_SIZE, +}; + +static const struct input_id goodix_berlin_i2c_input_id = { + .bustype = BUS_I2C, + .vendor = 0x0416, + .product = 0x1001, +}; + +static int goodix_berlin_i2c_probe(struct i2c_client *client) +{ + struct regmap *map; + + map = devm_regmap_init_i2c(client, &goodix_berlin_i2c_regmap_conf); + if (IS_ERR(map)) + return PTR_ERR(map); + + return goodix_berlin_probe(&client->dev, client->irq, + &goodix_berlin_i2c_input_id, map); +} + +static void goodix_berlin_i2c_remove(struct i2c_client *client) +{ + goodix_berlin_remove(&client->dev); +} + +static const struct i2c_device_id goodix_berlin_i2c_id[] = { + { "gt9916", 0 }, + { } +}; + +MODULE_DEVICE_TABLE(i2c, goodix_berlin_i2c_id); + +static const struct of_device_id goodix_berlin_i2c_of_match[] = { + { .compatible = "goodix,gt9916", }, + { }, +}; + +static struct i2c_driver goodix_berlin_i2c_driver = { + .driver = { + .name = "goodix-berlin-i2c", + .of_match_table = goodix_berlin_i2c_of_match, + .pm = pm_sleep_ptr(&goodix_berlin_pm_ops), + }, + .probe = goodix_berlin_i2c_probe, + .remove = goodix_berlin_i2c_remove, + .id_table = goodix_berlin_i2c_id, +}; +module_i2c_driver(goodix_berlin_i2c_driver); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Goodix Berlin I2C Touchscreen driver"); +MODULE_AUTHOR("Neil Armstrong <neil.armstrong@linaro.org>");
Add initial support for the new Goodix "Berlin" touchscreen ICs over the I2C interface. This initial driver is derived from the Goodix goodix_ts_berlin available at [1] and [2] and only supports the GT9916 IC present on the Qualcomm SM8550 MTP & QRD touch panel. The current implementation only supports BerlinD, aka GT9916. [1] https://github.com/goodix/goodix_ts_berlin [2] https://git.codelinaro.org/clo/la/platform/vendor/opensource/touch-drivers Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> --- drivers/input/touchscreen/Kconfig | 14 +++++ drivers/input/touchscreen/Makefile | 1 + drivers/input/touchscreen/goodix_berlin_i2c.c | 76 +++++++++++++++++++++++++++ 3 files changed, 91 insertions(+)