@@ -13,6 +13,9 @@ description:
Supports the Elan eKTH6915 touchscreen controller.
This touchscreen controller uses the i2c-hid protocol with a reset GPIO.
+allOf:
+ - $ref: /schemas/input/touchscreen/touchscreen.yaml#
+
properties:
compatible:
items:
@@ -24,6 +27,8 @@ properties:
interrupts:
maxItems: 1
+ panel: true
+
reset-gpios:
description: Reset GPIO; not all touchscreens using eKTH6915 hook this up.
@@ -14,6 +14,9 @@ description:
This touchscreen uses the i2c-hid protocol but has some non-standard
power sequencing required.
+allOf:
+ - $ref: /schemas/input/touchscreen/touchscreen.yaml#
+
properties:
compatible:
oneOf:
@@ -30,6 +33,8 @@ properties:
interrupts:
maxItems: 1
+ panel: true
+
reset-gpios:
true
@@ -44,6 +44,8 @@ properties:
description: HID descriptor address
$ref: /schemas/types.yaml#/definitions/uint32
+ panel: true
+
post-power-on-delay-ms:
description: Time required by the device after enabling its regulators
or powering it on, before it is ready for communication.
@@ -10,6 +10,13 @@ maintainers:
- Dmitry Torokhov <dmitry.torokhov@gmail.com>
properties:
+ panel:
+ description: If this touchscreen is integrally connected to a panel, this
+ is a reference to that panel. The presence of this reference indicates
+ that the touchscreen should be power sequenced together with the panel
+ and that they may share power and/or reset signals.
+ $ref: /schemas/types.yaml#/definitions/phandle
+
touchscreen-min-x:
description: minimum x coordinate reported
$ref: /schemas/types.yaml#/definitions/uint32
As talked about in the patch ("drm/panel: Add a way for other devices to follow panel state"), touchscreens that are connected to panels are generally expected to be power sequenced together with the panel they're attached to. Today, nothing provides information allowing you to find out that a touchscreen is connected to a panel. Let's add a phandle for this. The proerty is added to the generic touchscreen bindings and then enabled in the bindings for the i2c-hid backed devices. This can and should be added for other touchscreens in the future, but for now let's start small. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> --- (no changes since v2) Changes in v2: - Move the description to the generic touchscreen.yaml. - Update the desc to make it clearer it's only for integrated devices. Documentation/devicetree/bindings/input/elan,ekth6915.yaml | 5 +++++ .../devicetree/bindings/input/goodix,gt7375p.yaml | 5 +++++ Documentation/devicetree/bindings/input/hid-over-i2c.yaml | 2 ++ .../devicetree/bindings/input/touchscreen/touchscreen.yaml | 7 +++++++ 4 files changed, 19 insertions(+)