| Message ID | 20230908153203.122062-2-kamel.bouhara@bootlin.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | Input: add driver for TouchNetix aXiom touchscreen | expand |
On 08/09/2023 17:32, Kamel Bouhara wrote: > Add a new driver for the TouchNetix's aXiom family of > multi-touch controller. This driver only support i2c > and can be later adapted for SPI and USB support. > > Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com> > --- > .../devicetree/bindings/vendor-prefixes.yaml | 2 + Thank you for your patch. There is something to discuss/improve. 1. Bindings are separate patches. I am surprised that you did not send this through your collegagues at Bootlin for some internal review. It would spot such easy things to fix. 2. Please use subject prefixes matching the subsystem. You can get them for example with `git log --oneline -- DIRECTORY_OR_FILE` on the directory your patch is touching. 3. Please run scripts/checkpatch.pl and fix reported warnings. Some warnings can be ignored, but the code here looks like it needs a fix. Feel free to get in touch if the warning is not clear. 4. Please use scripts/get_maintainers.pl to get a list of necessary people and lists to CC. It might happen, that command when run on an older kernel, gives you outdated entries. Therefore please be sure you base your patches on recent Linux kernel. You missed at least devicetree list (maybe more), so this won't be tested by automated tooling. Performing review on untested code might be a waste of time, thus I will skip this patch entirely till you follow the process allowing the patch to be tested. Please kindly resend and include all necessary To/Cc entries. Limited review follows. > MAINTAINERS | 7 + > drivers/input/touchscreen/Kconfig | 11 + > drivers/input/touchscreen/Makefile | 1 + > drivers/input/touchscreen/axiom_core.c | 382 ++++++++++++++++++ > drivers/input/touchscreen/axiom_core.h | 140 +++++++ > drivers/input/touchscreen/axiom_i2c.c | 349 ++++++++++++++++ > 7 files changed, 892 insertions(+) > create mode 100644 drivers/input/touchscreen/axiom_core.c > create mode 100644 drivers/input/touchscreen/axiom_core.h > create mode 100644 drivers/input/touchscreen/axiom_i2c.c > > diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml > index 573578db9509..b0a3ed451f15 100644 > --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml > +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml > @@ -175,6 +175,8 @@ patternProperties: > "^awinic,.*": > description: Shanghai Awinic Technology Co., Ltd. > "^axentia,.*": > + description: TouchNetix > + "^axiom,.*": > description: Axentia Technologies AB > "^axis,.*": > description: Axis Communications AB > diff --git a/MAINTAINERS b/MAINTAINERS > index 389fe9e38884..43add48257d8 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -3373,6 +3373,13 @@ W: https://ez.analog.com/linux-software-drivers > F: Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml > F: drivers/hwmon/axi-fan-control.c > > +AXIOM I2C TOUCHSCREEN DRIVER > +M: Kamel Bouhara <kamel.bouhara@bootlin.com> > +L: linux-input@vger.kernel.org > +S: Maintained > +F: drivers/input/touchscreen/axiom_core.c > +F: drivers/input/touchscreen/axiom_i2.c > + > AXXIA I2C CONTROLLER > M: Krzysztof Adamski <krzysztof.adamski@nokia.com> > L: linux-i2c@vger.kernel.org > diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig > index e3e2324547b9..08a770a0c5e5 100644 > --- a/drivers/input/touchscreen/Kconfig > +++ b/drivers/input/touchscreen/Kconfig > @@ -150,6 +150,17 @@ config TOUCHSCREEN_AUO_PIXCIR > To compile this driver as a module, choose M here: the > module will be called auo-pixcir-ts. > > +config TOUCHSCREEN_AXIOM_I2C > + tristate "AXIOM based multi-touch panel controllers" > + help > + Say Y here if you have a axiom touchscreen connected to > + your system. > + > + If unsure, say N. > + > + To compile this driver as a module, choose M here: the > + module will be called axiom_i2c. > + > config TOUCHSCREEN_BU21013 > tristate "BU21013 based touch panel controllers" > depends on I2C > diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile > index 62bd24f3ac8e..59a3234ddb09 100644 > --- a/drivers/input/touchscreen/Makefile > +++ b/drivers/input/touchscreen/Makefile > @@ -18,6 +18,7 @@ obj-$(CONFIG_TOUCHSCREEN_ADS7846) += ads7846.o > obj-$(CONFIG_TOUCHSCREEN_AR1021_I2C) += ar1021_i2c.o > obj-$(CONFIG_TOUCHSCREEN_ATMEL_MXT) += atmel_mxt_ts.o > obj-$(CONFIG_TOUCHSCREEN_AUO_PIXCIR) += auo-pixcir-ts.o > +obj-$(CONFIG_TOUCHSCREEN_AXIOM_I2C) += axiom_core.o axiom_i2c.o > obj-$(CONFIG_TOUCHSCREEN_BU21013) += bu21013_ts.o > obj-$(CONFIG_TOUCHSCREEN_BU21029) += bu21029_ts.o > obj-$(CONFIG_TOUCHSCREEN_CHIPONE_ICN8318) += chipone_icn8318.o > diff --git a/drivers/input/touchscreen/axiom_core.c b/drivers/input/touchscreen/axiom_core.c > new file mode 100644 > index 000000000000..d381afd7fb84 > --- /dev/null > +++ b/drivers/input/touchscreen/axiom_core.c > @@ -0,0 +1,382 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * TouchNetix aXiom Touchscreen Driver > + * > + * Copyright (C) 2020-2023 TouchNetix Ltd. > + * > + * Author(s): Mark Satterthwaite <mark.satterthwaite@touchnetix.com> > + * Pedro Torruella <pedro.torruella@touchnetix.com> > + * Bart Prescott <bartp@baasheep.co.uk> > + * Hannah Rossiter <hannah.rossiter@touchnetix.com> > + * > + */ > + > +#include <linux/crc16.h> > +#include <linux/device.h> > +#include <linux/input.h> > +#include <linux/input/mt.h> > +#include <linux/module.h> > +#include <linux/kernel.h> > +#include <linux/slab.h> > + > +#include "axiom_core.h" > + > +/** > + * Decodes and populates the local u31 structure. > + * Given a buffer of data read from page 0 of u31 in an aXiom device. > + */ > +void axiom_get_dev_info(struct axiom_data *ts, char *info) > +{ > + struct axiom_devinfo *devinfo = &ts->devinfo; > + > + if (devinfo) { > + devinfo->bootloader_mode = ((info[1] & 0x80) != 0) ? 1 : 0; > + devinfo->device_id = ((info[1] & 0x7F) << 8) | info[0]; > + devinfo->fw_minor = info[2]; > + devinfo->fw_major = info[3]; > + devinfo->fw_info_extra = (info[4]) | (info[5] << 8); > + devinfo->bootloader_fw_ver_minor = info[6]; > + devinfo->bootloader_fw_ver_major = info[7]; > + devinfo->jedec_id = (info[8]) | (info[9] << 8); > + devinfo->num_usages = info[10]; > + devinfo->silicon_revision = info[11]; > + } > +} > +EXPORT_SYMBOL_GPL(axiom_get_dev_info); Nope > + > +/** > + * Decodes and populates the local Usage Table. > + * Given a buffer of data read from page 1 onwards of u31 from an aXiom > + * device. > + */ > +char axiom_populate_usage_table(struct axiom_data *ts, char *rx_data) > +{ > + u32 usage_id = 0; > + char max_report_len = 0; > + struct axiom_devinfo *device_info; > + struct usage_entry *usage_table; > + > + device_info = &ts->devinfo; > + usage_table = ts->usage_table; > + > + for (usage_id = 0; usage_id < device_info->num_usages; usage_id++) { > + u16 offset = (usage_id * U31_BYTES_PER_USAGE); > + char id = rx_data[offset + 0]; > + char start_page = rx_data[offset + 1]; > + char num_pages = rx_data[offset + 2]; > + char max_offset = ((rx_data[offset + 3] & 0x7F) + 1) * 2; > + > + /* Store the entry into the usage table */ > + usage_table[usage_id].id = id; > + usage_table[usage_id].is_report = ((num_pages == 0) ? 1 : 0); > + usage_table[usage_id].start_page = start_page; > + usage_table[usage_id].num_pages = num_pages; > + > + dev_dbg(ts->pdev, "Usage %2u Info: %*ph\n", usage_id, > + U31_BYTES_PER_USAGE, &rx_data[offset]); > + > + /* Identify the max report length the module will receive */ > + if ((usage_table[usage_id].is_report) > + && (max_offset > max_report_len)) > + max_report_len = max_offset; > + } > + ts->usage_table_populated = true; > + > + return max_report_len; > +} > +EXPORT_SYMBOL_GPL(axiom_populate_usage_table); > + > +/** > + * Translate usage/page/offset triplet into physical address. > + * > + * @usage: groups of registers > + * @page: page to which the usage belongs to offset > + * @offset of the usage > + */ > +u16 > +usage_to_target_address(struct axiom_data *ts, char usage, char page, > + char offset) > +{ > + struct axiom_devinfo *device_info; > + struct usage_entry *usage_table; > + u16 target_address; > + u32 i; > + > + device_info = &ts->devinfo; > + usage_table = ts->usage_table; > + > + /* At the moment the convention is that u31 is always at physical address 0x0 */ > + if (!ts->usage_table_populated && (usage == DEVINFO_USAGE_ID)) { > + target_address = ((page << 8) + offset); > + } else if (ts->usage_table_populated) { > + for (i = 0; i < device_info->num_usages; i++) { > + if (usage_table[i].id == usage) { > + if (page < usage_table[i].num_pages) { > + target_address = > + ((usage_table[i].start_page + page) << 8) + offset; > + } else { > + target_address = 0xFFFF; > + dev_err(ts->pdev, > + "Invalid usage table! usage: %u, page: %u, offset: %u\n", > + usage, page, offset); > + } > + break; > + } > + } > + } else { > + target_address = 0xFFFF; > + dev_err(ts->pdev, "Unpopulated usage table for usage: %u\n", > + usage); > + } > + > + dev_dbg(ts->pdev, "target_address is 0x%04x for usage: %u page %u\n", > + target_address, usage, page); > + > + return target_address; > +} > +EXPORT_SYMBOL_GPL(usage_to_target_address); Nope, drop. > + > +void axiom_remove(struct axiom_data *ts) > +{ > + if (ts->usage_table) > + ts->usage_table_populated = false; > + > + if (ts->input_dev) > + input_unregister_device(ts->input_dev); > +} > +EXPORT_SYMBOL_GPL(axiom_remove); Nope, drop. > + > + > +/** > + * Take a raw buffer with u41 report data and decode it. > + * Also generate input events if needed. > + * @rx_buf: ptr to a byte array [0]: Usage number [1]: Status LSB [2]: Status MSB > + */ > +void axiom_process_u41_report(struct axiom_data *ts, char *rx_buf) > +{ > + struct axiom_target_report target; > + struct input_dev *input_dev = ts->input_dev; > + bool update_done = false; > + u16 target_status; > + u32 i; > + > + if (rx_buf[0] != 0x41) { > + dev_err(ts->pdev, > + "Data in buffer does not have expected u41 format.\n"); > + return; > + } > + > + target_status = ((rx_buf[1]) | (rx_buf[2] << 8)); > + > + for (i = 0; i < U41_MAX_TARGETS; i++) { > + target.index = i; > + target.present = ((target_status & (1 << i)) != 0) ? 1 : 0; > + target.x = (rx_buf[(i * 4) + 3]) | (rx_buf[(i * 4) + 4] << 8); > + target.y = (rx_buf[(i * 4) + 5]) | (rx_buf[(i * 4) + 6] << 8); > + target.z = (s8) (rx_buf[i + 43]); > + update_done |= axiom_process_u41_report_target(ts, &target); > + } > + > + if (update_done) > + input_sync(input_dev); > +} > +EXPORT_SYMBOL_GPL(axiom_process_u41_report); Nope, drop. > + > +void axiom_process_u46_report(struct axiom_data *ts, char *rx_buf) > +{ > + struct input_dev *input_dev = ts->input_dev; > + u16 aux_value; > + u32 event_value; > + u32 i = 0; > + > + for (i = 0; i < U46_AUX_CHANNELS; i++) { > + aux_value = > + ((rx_buf[(i * 2) + 2] << 8) | (rx_buf[(i * 2) + 1])) & > + U46_AUX_MASK; > + event_value = (i << 16) | (aux_value); > + input_event(input_dev, EV_MSC, MSC_RAW, event_value); > + } > + > + input_mt_sync(input_dev); > + input_sync(input_dev); > +} > +EXPORT_SYMBOL_GPL(axiom_process_u46_report); Nope, drop. Clean your driver before sending upstream. :( > + > +/** > + * Support function to axiom_process_report. > + * It validates the crc and multiplexes the axiom reports to the appropriate > + * report handler > + */ > +void axiom_process_report(struct axiom_data *ts, char *report_data) > +{ > + struct device *pdev = ts->pdev; > + char usage = report_data[1]; > + u16 crc_report; > + u16 crc_calc; > + char len; > + > + if ((report_data[0] & COMMS_OVERFLOW_MSK) != 0) > + ts->report_overflow_counter++; > + > + len = (report_data[0] & COMMS_REPORT_LEN_MSK) << 1; > + if (len == 0) { > + dev_err(pdev, "Zero length report discarded.\n"); > + return; > + } > + > + dev_dbg(pdev, "Payload Data %*ph\n", len, report_data); > + > + /* Validate the report CRC */ > + crc_report = (report_data[len - 1] << 8) | (report_data[len - 2]); > + /* Length is in 16 bit words and remove the size of the CRC16 itself */ > + crc_calc = crc16(0, report_data, (len - 2)); > + > + if (crc_calc != crc_report) { > + dev_err(pdev, > + "CRC mismatch! Expected: %#x, Calculated CRC: %#x.\n", > + crc_report, crc_calc); > + return; > + } > + > + switch (usage) { > + case USAGE_2DCTS_REPORT_ID: > + axiom_process_u41_report(ts, &report_data[1]); > + break; > + > + case USAGE_2AUX_REPORT_ID: > + /* This is an aux report (force) */ > + axiom_process_u46_report(ts, &report_data[1]); > + break; > + > + case USAGE_2HB_REPORT_ID: > + /* This is a heartbeat report */ > + break; > + > + default: > + break; > + } > + > + ts->report_counter++; > +} > +EXPORT_SYMBOL_GPL(axiom_process_report); Nope, drop. > + > +MODULE_AUTHOR("Kamel Bouhara <kamel.bouhara@bootlin.com>"); > +MODULE_DESCRIPTION("aXiom touchscreen core logic"); > +MODULE_LICENSE("GPL"); > +MODULE_ALIAS("axiom"); ???? How can you have multiple drivers with the same alias? Even if your Makefile allowed it (but it doesn't!), it would not make sense. > diff --git a/drivers/input/touchscreen/axiom_core.h b/drivers/input/touchscreen/axiom_core.h > new file mode 100644 > index 000000000000..f129d28671ff > --- /dev/null > +++ b/drivers/input/touchscreen/axiom_core.h > @@ -0,0 +1,140 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > +/* > + * TouchNetix aXiom Touchscreen Driver > + * > + * Copyright (C) 2020-2023 TouchNetix Ltd. > + * > + * Author(s): Mark Satterthwaite <mark.satterthwaite@touchnetix.com> > + * Pedro Torruella <pedro.torruella@touchnetix.com> > + * Bart Prescott <bartp@baasheep.co.uk> > + * Hannah Rossiter <hannah.rossiter@touchnetix.com> > + * > + * This program is free software; you can redistribute it and/or modify it > + * under the terms of the GNU General Public License as published by the > + * Free Software Foundation; either version 2 of the License, or (at your > + * option) any later version. OK, so this is some old, vendor crappy code. We do not have it since some years! > + * ... > + > +static void axiom_i2c_poll(struct input_dev *input_dev) > +{ > + struct axiom_data *ts = input_get_drvdata(input_dev); > + char *rx_data = ts->rx_buf; > + > + axiom_i2c_read(ts->client, REPORT_USAGE_ID, 0, rx_data, > + ts->max_report_len); > + axiom_process_report(ts, rx_data); > +} > + > +/** > + * Retrieve, store and print the axiom device information > + */ > +int axiom_discover(struct axiom_data *ts) This has to be static. > +{ > + char *rx_data = &ts->rx_buf[0]; > + struct device *pdev = ts->pdev; > + int ret; > + > + /* First the first page of u31 to get the device information and */ > + /* the number of usages */ > + ret = > + axiom_i2c_read(ts->client, DEVINFO_USAGE_ID, 0, rx_data, > + AX_U31_PAGE0_LENGTH); > + if (ret) > + return ret; > + > + axiom_get_dev_info(ts, rx_data); > + > + dev_dbg(pdev, "Data Decode:\n"); > + dev_dbg(pdev, " Bootloader Mode: %u\n", ts->devinfo.bootloader_mode); > + dev_dbg(pdev, " Device ID : %04x\n", ts->devinfo.device_id); > + dev_dbg(pdev, " Firmware Rev : %02x.%02x\n", ts->devinfo.fw_major, > + ts->devinfo.fw_minor); > + dev_dbg(pdev, " Bootloader Rev : %02x.%02x\n", > + ts->devinfo.bootloader_fw_ver_major, > + ts->devinfo.bootloader_fw_ver_minor); > + dev_dbg(pdev, " FW Extra Info : %04x\n", ts->devinfo.fw_info_extra); > + dev_dbg(pdev, " Silicon : %02x\n", ts->devinfo.jedec_id); > + dev_dbg(pdev, " Num Usages : %04x\n", ts->devinfo.num_usages); > + > + /* Read the second page of u31 to get the usage table */ > + ret = axiom_i2c_read(ts->client, DEVINFO_USAGE_ID, 1, rx_data, > + (U31_BYTES_PER_USAGE * ts->devinfo.num_usages)); > + if (ret) > + return ret; > + > + ts->max_report_len = axiom_populate_usage_table(ts, rx_data); > + dev_dbg(pdev, "Max Report Length: %u\n", ts->max_report_len); > + > + return 0; > +} > +EXPORT_SYMBOL_GPL(axiom_discover); Nope. > + > +/** > + * Rebaseline the touchscreen, effectively zero-ing it > + */ > +void axiom_rebaseline(struct axiom_data *ts) Missing static. > +{ > + struct device *pdev = ts->pdev; > + char buffer[8] = { 0 }; > + int ret; > + > + memset(buffer, 0, sizeof(buffer)); > + > + buffer[0] = REBASELINE_CMD; > + > + ret = axiom_i2c_write(ts->client, 0x02, 0, buffer, sizeof(buffer)); > + if (ret) > + dev_err(pdev, "Rebaseline failed\n"); > + > + dev_info(pdev, "Capture Baseline Requested\n"); > +} > +EXPORT_SYMBOL_GPL(axiom_rebaseline); Nope. > + > +static irqreturn_t axiom_irq(int irq, void *handle) > +{ > + struct axiom_data *ts = handle; > + u8 *rx_data = &ts->rx_buf[0]; > + > + axiom_i2c_read(ts->client, REPORT_USAGE_ID, 0, rx_data, ts->max_report_len); > + axiom_process_report(ts, rx_data); > + > + return IRQ_HANDLED; > +} > + > +static int axiom_i2c_probe(struct i2c_client *client) > +{ > + struct axiom_data *ts; > + struct device *pdev = &client->dev; > + struct input_dev *input_dev; > + int error; > + int target; > + > + ts = devm_kzalloc(pdev, sizeof(*ts), GFP_KERNEL); > + if (!ts) > + return -ENOMEM; > + > + ts->irq_gpio = devm_gpiod_get_optional(pdev, "irq", GPIOD_IN); > + if (IS_ERR(ts->irq_gpio)) { > + error = PTR_ERR(ts->irq_gpio); > + dev_err(pdev, "failed to request irq GPIO: %d", error); Heh... syntax is: return dev_err_probe() > + return error; > + } > + > + ts->reset_gpio = devm_gpiod_get_optional(pdev, "reset", GPIOD_OUT_HIGH); You do not use this GPIO at all. Dead code, especially that you keep the device in reset. This was absolutely never tested (unless with incorrect DTS...). > + if (IS_ERR(ts->reset_gpio)) { > + error = PTR_ERR(ts->reset_gpio); return dev_err_probe() > + dev_err(pdev, "failed to request reset GPIO: %d", error); > + return error; > + } > + > + if (ts->irq_gpio) { > + error = > + devm_request_threaded_irq(pdev, client->irq, NULL, > + axiom_irq, > + IRQF_TRIGGER_LOW | IRQF_ONESHOT, > + "axiom_irq", ts); > + if (error != 0) { > + dev_err(pdev, "Failed to request IRQ %u (error: %d)\n", > + client->irq, error); return dev_err_probe() > + return error; > + } > + } > + > + ts->client = client; > + ts->pdev = pdev; > + ts->usage_table_populated = false; > + > + i2c_set_clientdata(client, ts); > + > + axiom_discover(ts); > + axiom_rebaseline(ts); > + > + input_dev = devm_input_allocate_device(ts->pdev); > + if (!input_dev) { > + dev_err(pdev, "Failed to allocate input device\n"); I don't think we print memory allocation failures. > + return -ENOMEM; > + } > + > + input_dev->name = "TouchNetix aXiom Touchscreen"; > + input_dev->phys = "input/axiom_ts"; > + > + /* Single Touch */ > + input_set_abs_params(input_dev, ABS_X, 0, 65535, 0, 0); > + input_set_abs_params(input_dev, ABS_Y, 0, 65535, 0, 0); > + > + /* Multi Touch */ > + /* Min, Max, Fuzz (expected noise in px, try 4?) and Flat */ > + input_set_abs_params(input_dev, ABS_MT_POSITION_X, 0, 65535, 0, 0); > + /* Min, Max, Fuzz (expected noise in px, try 4?) and Flat */ > + input_set_abs_params(input_dev, ABS_MT_POSITION_Y, 0, 65535, 0, 0); > + input_set_abs_params(input_dev, ABS_MT_TOOL_TYPE, 0, MT_TOOL_MAX, 0, 0); > + input_set_abs_params(input_dev, ABS_MT_DISTANCE, 0, 127, 0, 0); > + input_set_abs_params(input_dev, ABS_MT_PRESSURE, 0, 127, 0, 0); > + > + /* Registers the axiom device as a touch screen instead of as a mouse pointer */ > + input_mt_init_slots(input_dev, U41_MAX_TARGETS, INPUT_MT_DIRECT); > + > + input_set_capability(input_dev, EV_KEY, BTN_LEFT); > + > + /* Enables the raw data for up to 4 force channels to be sent to the */ > + /* input subsystem */ > + set_bit(EV_REL, input_dev->evbit); > + set_bit(EV_MSC, input_dev->evbit); > + /* Declare that we support "RAW" Miscellaneous events */ > + set_bit(MSC_RAW, input_dev->mscbit); > + > + if (!ts->irq_gpio) { > + error = input_setup_polling(input_dev, axiom_i2c_poll); > + if (error) { > + dev_err(ts->pdev, "Unable to set up polling: %d\n", > + error); > + return error; > + } > + input_set_poll_interval(input_dev, POLL_INTERVAL_DEFAULT_MS); > + } > + > + error = input_register_device(input_dev); > + if (error != 0) { > + dev_err(ts->pdev, > + "Could not register with Input Sub-system., error=%d\n", > + error); > + return error; > + } > + > + ts->input_dev = input_dev; > + input_set_drvdata(ts->input_dev, ts); > + > + dev_info(pdev, "AXIOM: I2C driver registered with Input Sub-System.\n"); Drop silly tracing messages. > + > + /* Delay just a smidge before enabling the IRQ */ > + udelay(10); ??? So where is the IRQ being enabled? This is confusing. > + > + /* Ensure that all reports are initialised to not be present. */ > + for (target = 0; target < U41_MAX_TARGETS; target++) > + ts->targets[target].state = TARGET_STATE_NOT_PRESENT; > + > + return 0; > +} > + > +static void axiom_i2c_remove(struct i2c_client *client) > +{ > + struct axiom_data *ts = i2c_get_clientdata(client); > + > + axiom_remove(ts); > +} > + > +static const struct i2c_device_id axiom_i2c_id_table[] = { > + {"ax54a"}, > + {}, > +}; > + > +MODULE_DEVICE_TABLE(i2c, axiom_i2c_id_table); > + > +static const struct of_device_id axiom_i2c_dt_ids[] = { > + { > + .compatible = "axiom,ax54a", That's not documented. And you would know it if you run basic checks before sending patches upstream. Please run scripts/checkpatch.pl and fix reported warnings. Some warnings can be ignored, but the code here looks like it needs a fix. Feel free to get in touch if the warning is not clear. > + .data = "axiom", Why? That's not readable. Indent it like in other drivers. > + }, > + {} > +}; > + > +MODULE_DEVICE_TABLE(of, axiom_i2c_dt_ids); > + > +static struct i2c_driver axiom_i2c_driver = { > + .driver = { > + .name = "axiom_i2c", > + .of_match_table = of_match_ptr(axiom_i2c_dt_ids), Drop of_match_ptr(), it causes warnings in your code... > + }, > + .id_table = axiom_i2c_id_table, > + .probe = axiom_i2c_probe, > + .remove = axiom_i2c_remove, > +}; > + > +module_i2c_driver(axiom_i2c_driver); > + > +MODULE_AUTHOR("Kamel Bouhara <kamel.bouhara@bootlin.com>"); > +MODULE_DESCRIPTION("aXiom touchscreen I2C bus driver"); > +MODULE_LICENSE("GPL"); > +MODULE_ALIAS("axiom"); Nope, you cannot have such alias and it is not even needed. Best regards, Krzysztof
Le Mon, Sep 11, 2023 at 08:59:21AM +0200, Krzysztof Kozlowski a écrit : > On 08/09/2023 17:32, Kamel Bouhara wrote: > > Add a new driver for the TouchNetix's aXiom family of > > multi-touch controller. This driver only support i2c > > and can be later adapted for SPI and USB support. > > > > Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com> > > --- > > .../devicetree/bindings/vendor-prefixes.yaml | 2 + > > > Thank you for your patch. There is something to discuss/improve. > > 1. Bindings are separate patches. > > I am surprised that you did not send this through your collegagues at > Bootlin for some internal review. It would spot such easy things to fix. > > 2. Please use subject prefixes matching the subsystem. You can get them > for example with `git log --oneline -- DIRECTORY_OR_FILE` on the > directory your patch is touching. > > 3. Please run scripts/checkpatch.pl and fix reported warnings. Some > warnings can be ignored, but the code here looks like it needs a fix. > Feel free to get in touch if the warning is not clear. > > 4. Please use scripts/get_maintainers.pl to get a list of necessary > people and lists to CC. It might happen, that command when run on an > older kernel, gives you outdated entries. Therefore please be sure you > base your patches on recent Linux kernel. > > You missed at least devicetree list (maybe more), so this won't be > tested by automated tooling. Performing review on untested code might be > a waste of time, thus I will skip this patch entirely till you follow > the process allowing the patch to be tested. > > Please kindly resend and include all necessary To/Cc entries. > > Limited review follows. Hello Krzysztof, Sorry for this late answer and thanks for this not so limited review, much appreciate :) ! > > > > MAINTAINERS | 7 + > > drivers/input/touchscreen/Kconfig | 11 + > > drivers/input/touchscreen/Makefile | 1 + > > drivers/input/touchscreen/axiom_core.c | 382 ++++++++++++++++++ > > drivers/input/touchscreen/axiom_core.h | 140 +++++++ > > drivers/input/touchscreen/axiom_i2c.c | 349 ++++++++++++++++ > > 7 files changed, 892 insertions(+) > > create mode 100644 drivers/input/touchscreen/axiom_core.c > > create mode 100644 drivers/input/touchscreen/axiom_core.h > > create mode 100644 drivers/input/touchscreen/axiom_i2c.c > > > > diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml > > index 573578db9509..b0a3ed451f15 100644 > > --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml > > +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml > > @@ -175,6 +175,8 @@ patternProperties: > > "^awinic,.*": > > description: Shanghai Awinic Technology Co., Ltd. > > "^axentia,.*": > > + description: TouchNetix > > + "^axiom,.*": > > description: Axentia Technologies AB > > "^axis,.*": > > description: Axis Communications AB > > diff --git a/MAINTAINERS b/MAINTAINERS > > index 389fe9e38884..43add48257d8 100644 > > --- a/MAINTAINERS > > +++ b/MAINTAINERS > > @@ -3373,6 +3373,13 @@ W: https://ez.analog.com/linux-software-drivers > > F: Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml > > F: drivers/hwmon/axi-fan-control.c > > > > +AXIOM I2C TOUCHSCREEN DRIVER > > +M: Kamel Bouhara <kamel.bouhara@bootlin.com> > > +L: linux-input@vger.kernel.org > > +S: Maintained > > +F: drivers/input/touchscreen/axiom_core.c > > +F: drivers/input/touchscreen/axiom_i2.c > > + > > AXXIA I2C CONTROLLER > > M: Krzysztof Adamski <krzysztof.adamski@nokia.com> > > L: linux-i2c@vger.kernel.org > > diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig > > index e3e2324547b9..08a770a0c5e5 100644 > > --- a/drivers/input/touchscreen/Kconfig > > +++ b/drivers/input/touchscreen/Kconfig > > @@ -150,6 +150,17 @@ config TOUCHSCREEN_AUO_PIXCIR > > To compile this driver as a module, choose M here: the > > module will be called auo-pixcir-ts. > > > > +config TOUCHSCREEN_AXIOM_I2C > > + tristate "AXIOM based multi-touch panel controllers" > > + help > > + Say Y here if you have a axiom touchscreen connected to > > + your system. > > + > > + If unsure, say N. > > + > > + To compile this driver as a module, choose M here: the > > + module will be called axiom_i2c. > > + > > config TOUCHSCREEN_BU21013 > > tristate "BU21013 based touch panel controllers" > > depends on I2C > > diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile > > index 62bd24f3ac8e..59a3234ddb09 100644 > > --- a/drivers/input/touchscreen/Makefile > > +++ b/drivers/input/touchscreen/Makefile > > @@ -18,6 +18,7 @@ obj-$(CONFIG_TOUCHSCREEN_ADS7846) += ads7846.o > > obj-$(CONFIG_TOUCHSCREEN_AR1021_I2C) += ar1021_i2c.o > > obj-$(CONFIG_TOUCHSCREEN_ATMEL_MXT) += atmel_mxt_ts.o > > obj-$(CONFIG_TOUCHSCREEN_AUO_PIXCIR) += auo-pixcir-ts.o > > +obj-$(CONFIG_TOUCHSCREEN_AXIOM_I2C) += axiom_core.o axiom_i2c.o > > obj-$(CONFIG_TOUCHSCREEN_BU21013) += bu21013_ts.o > > obj-$(CONFIG_TOUCHSCREEN_BU21029) += bu21029_ts.o > > obj-$(CONFIG_TOUCHSCREEN_CHIPONE_ICN8318) += chipone_icn8318.o > > diff --git a/drivers/input/touchscreen/axiom_core.c b/drivers/input/touchscreen/axiom_core.c > > new file mode 100644 > > index 000000000000..d381afd7fb84 > > --- /dev/null > > +++ b/drivers/input/touchscreen/axiom_core.c > > @@ -0,0 +1,382 @@ > > +// SPDX-License-Identifier: GPL-2.0-only > > +/* > > + * TouchNetix aXiom Touchscreen Driver > > + * > > + * Copyright (C) 2020-2023 TouchNetix Ltd. > > + * > > + * Author(s): Mark Satterthwaite <mark.satterthwaite@touchnetix.com> > > + * Pedro Torruella <pedro.torruella@touchnetix.com> > > + * Bart Prescott <bartp@baasheep.co.uk> > > + * Hannah Rossiter <hannah.rossiter@touchnetix.com> > > + * > > + */ > > + > > +#include <linux/crc16.h> > > +#include <linux/device.h> > > +#include <linux/input.h> > > +#include <linux/input/mt.h> > > +#include <linux/module.h> > > +#include <linux/kernel.h> > > +#include <linux/slab.h> > > + > > +#include "axiom_core.h" > > + > > +/** > > + * Decodes and populates the local u31 structure. > > + * Given a buffer of data read from page 0 of u31 in an aXiom device. > > + */ > > +void axiom_get_dev_info(struct axiom_data *ts, char *info) > > +{ > > + struct axiom_devinfo *devinfo = &ts->devinfo; > > + > > + if (devinfo) { > > + devinfo->bootloader_mode = ((info[1] & 0x80) != 0) ? 1 : 0; > > + devinfo->device_id = ((info[1] & 0x7F) << 8) | info[0]; > > + devinfo->fw_minor = info[2]; > > + devinfo->fw_major = info[3]; > > + devinfo->fw_info_extra = (info[4]) | (info[5] << 8); > > + devinfo->bootloader_fw_ver_minor = info[6]; > > + devinfo->bootloader_fw_ver_major = info[7]; > > + devinfo->jedec_id = (info[8]) | (info[9] << 8); > > + devinfo->num_usages = info[10]; > > + devinfo->silicon_revision = info[11]; > > + } > > +} > > +EXPORT_SYMBOL_GPL(axiom_get_dev_info); > > Nope I guess this means no need to export the function ? I agree this is not required currently as we only have support the i2c variant. > > > + > > +/** > > + * Decodes and populates the local Usage Table. > > + * Given a buffer of data read from page 1 onwards of u31 from an aXiom > > + * device. > > + */ > > +char axiom_populate_usage_table(struct axiom_data *ts, char *rx_data) > > +{ > > + u32 usage_id = 0; > > + char max_report_len = 0; > > + struct axiom_devinfo *device_info; > > + struct usage_entry *usage_table; > > + > > + device_info = &ts->devinfo; > > + usage_table = ts->usage_table; > > + > > + for (usage_id = 0; usage_id < device_info->num_usages; usage_id++) { > > + u16 offset = (usage_id * U31_BYTES_PER_USAGE); > > + char id = rx_data[offset + 0]; > > + char start_page = rx_data[offset + 1]; > > + char num_pages = rx_data[offset + 2]; > > + char max_offset = ((rx_data[offset + 3] & 0x7F) + 1) * 2; > > + > > + /* Store the entry into the usage table */ > > + usage_table[usage_id].id = id; > > + usage_table[usage_id].is_report = ((num_pages == 0) ? 1 : 0); > > + usage_table[usage_id].start_page = start_page; > > + usage_table[usage_id].num_pages = num_pages; > > + > > + dev_dbg(ts->pdev, "Usage %2u Info: %*ph\n", usage_id, > > + U31_BYTES_PER_USAGE, &rx_data[offset]); > > + > > + /* Identify the max report length the module will receive */ > > + if ((usage_table[usage_id].is_report) > > + && (max_offset > max_report_len)) > > + max_report_len = max_offset; > > + } > > + ts->usage_table_populated = true; > > + > > + return max_report_len; > > +} > > +EXPORT_SYMBOL_GPL(axiom_populate_usage_table); > > + > > +/** > > + * Translate usage/page/offset triplet into physical address. > > + * > > + * @usage: groups of registers > > + * @page: page to which the usage belongs to offset > > + * @offset of the usage > > + */ > > +u16 > > +usage_to_target_address(struct axiom_data *ts, char usage, char page, > > + char offset) > > +{ > > + struct axiom_devinfo *device_info; > > + struct usage_entry *usage_table; > > + u16 target_address; > > + u32 i; > > + > > + device_info = &ts->devinfo; > > + usage_table = ts->usage_table; > > + > > + /* At the moment the convention is that u31 is always at physical address 0x0 */ > > + if (!ts->usage_table_populated && (usage == DEVINFO_USAGE_ID)) { > > + target_address = ((page << 8) + offset); > > + } else if (ts->usage_table_populated) { > > + for (i = 0; i < device_info->num_usages; i++) { > > + if (usage_table[i].id == usage) { > > + if (page < usage_table[i].num_pages) { > > + target_address = > > + ((usage_table[i].start_page + page) << 8) + offset; > > + } else { > > + target_address = 0xFFFF; > > + dev_err(ts->pdev, > > + "Invalid usage table! usage: %u, page: %u, offset: %u\n", > > + usage, page, offset); > > + } > > + break; > > + } > > + } > > + } else { > > + target_address = 0xFFFF; > > + dev_err(ts->pdev, "Unpopulated usage table for usage: %u\n", > > + usage); > > + } > > + > > + dev_dbg(ts->pdev, "target_address is 0x%04x for usage: %u page %u\n", > > + target_address, usage, page); > > + > > + return target_address; > > +} > > +EXPORT_SYMBOL_GPL(usage_to_target_address); > > Nope, drop. > > > + > > +void axiom_remove(struct axiom_data *ts) > > +{ > > + if (ts->usage_table) > > + ts->usage_table_populated = false; > > + > > + if (ts->input_dev) > > + input_unregister_device(ts->input_dev); > > +} > > +EXPORT_SYMBOL_GPL(axiom_remove); > > Nope, drop. > > > + > > > > + > > +/** > > + * Take a raw buffer with u41 report data and decode it. > > + * Also generate input events if needed. > > + * @rx_buf: ptr to a byte array [0]: Usage number [1]: Status LSB [2]: Status MSB > > + */ > > +void axiom_process_u41_report(struct axiom_data *ts, char *rx_buf) > > +{ > > + struct axiom_target_report target; > > + struct input_dev *input_dev = ts->input_dev; > > + bool update_done = false; > > + u16 target_status; > > + u32 i; > > + > > + if (rx_buf[0] != 0x41) { > > + dev_err(ts->pdev, > > + "Data in buffer does not have expected u41 format.\n"); > > + return; > > + } > > + > > + target_status = ((rx_buf[1]) | (rx_buf[2] << 8)); > > + > > + for (i = 0; i < U41_MAX_TARGETS; i++) { > > + target.index = i; > > + target.present = ((target_status & (1 << i)) != 0) ? 1 : 0; > > + target.x = (rx_buf[(i * 4) + 3]) | (rx_buf[(i * 4) + 4] << 8); > > + target.y = (rx_buf[(i * 4) + 5]) | (rx_buf[(i * 4) + 6] << 8); > > + target.z = (s8) (rx_buf[i + 43]); > > + update_done |= axiom_process_u41_report_target(ts, &target); > > + } > > + > > + if (update_done) > > + input_sync(input_dev); > > +} > > +EXPORT_SYMBOL_GPL(axiom_process_u41_report); > > Nope, drop. > > > + > > +void axiom_process_u46_report(struct axiom_data *ts, char *rx_buf) > > +{ > > + struct input_dev *input_dev = ts->input_dev; > > + u16 aux_value; > > + u32 event_value; > > + u32 i = 0; > > + > > + for (i = 0; i < U46_AUX_CHANNELS; i++) { > > + aux_value = > > + ((rx_buf[(i * 2) + 2] << 8) | (rx_buf[(i * 2) + 1])) & > > + U46_AUX_MASK; > > + event_value = (i << 16) | (aux_value); > > + input_event(input_dev, EV_MSC, MSC_RAW, event_value); > > + } > > + > > + input_mt_sync(input_dev); > > + input_sync(input_dev); > > +} > > +EXPORT_SYMBOL_GPL(axiom_process_u46_report); > > Nope, drop. > > Clean your driver before sending upstream. :( > > > + > > +/** > > + * Support function to axiom_process_report. > > + * It validates the crc and multiplexes the axiom reports to the appropriate > > + * report handler > > + */ > > +void axiom_process_report(struct axiom_data *ts, char *report_data) > > +{ > > + struct device *pdev = ts->pdev; > > + char usage = report_data[1]; > > + u16 crc_report; > > + u16 crc_calc; > > + char len; > > + > > + if ((report_data[0] & COMMS_OVERFLOW_MSK) != 0) > > + ts->report_overflow_counter++; > > + > > + len = (report_data[0] & COMMS_REPORT_LEN_MSK) << 1; > > + if (len == 0) { > > + dev_err(pdev, "Zero length report discarded.\n"); > > + return; > > + } > > + > > + dev_dbg(pdev, "Payload Data %*ph\n", len, report_data); > > + > > + /* Validate the report CRC */ > > + crc_report = (report_data[len - 1] << 8) | (report_data[len - 2]); > > + /* Length is in 16 bit words and remove the size of the CRC16 itself */ > > + crc_calc = crc16(0, report_data, (len - 2)); > > + > > + if (crc_calc != crc_report) { > > + dev_err(pdev, > > + "CRC mismatch! Expected: %#x, Calculated CRC: %#x.\n", > > + crc_report, crc_calc); > > + return; > > + } > > + > > + switch (usage) { > > + case USAGE_2DCTS_REPORT_ID: > > + axiom_process_u41_report(ts, &report_data[1]); > > + break; > > + > > + case USAGE_2AUX_REPORT_ID: > > + /* This is an aux report (force) */ > > + axiom_process_u46_report(ts, &report_data[1]); > > + break; > > + > > + case USAGE_2HB_REPORT_ID: > > + /* This is a heartbeat report */ > > + break; > > + > > + default: > > + break; > > + } > > + > > + ts->report_counter++; > > +} > > +EXPORT_SYMBOL_GPL(axiom_process_report); > > Nope, drop. > > > + > > +MODULE_AUTHOR("Kamel Bouhara <kamel.bouhara@bootlin.com>"); > > +MODULE_DESCRIPTION("aXiom touchscreen core logic"); > > +MODULE_LICENSE("GPL"); > > +MODULE_ALIAS("axiom"); > > ???? How can you have multiple drivers with the same alias? Even if your > Makefile allowed it (but it doesn't!), it would not make sense. > > > > diff --git a/drivers/input/touchscreen/axiom_core.h b/drivers/input/touchscreen/axiom_core.h > > new file mode 100644 > > index 000000000000..f129d28671ff > > --- /dev/null > > +++ b/drivers/input/touchscreen/axiom_core.h > > @@ -0,0 +1,140 @@ > > +/* SPDX-License-Identifier: GPL-2.0 */ > > +/* > > + * TouchNetix aXiom Touchscreen Driver > > + * > > + * Copyright (C) 2020-2023 TouchNetix Ltd. > > + * > > + * Author(s): Mark Satterthwaite <mark.satterthwaite@touchnetix.com> > > + * Pedro Torruella <pedro.torruella@touchnetix.com> > > + * Bart Prescott <bartp@baasheep.co.uk> > > + * Hannah Rossiter <hannah.rossiter@touchnetix.com> > > + * > > + * This program is free software; you can redistribute it and/or modify it > > + * under the terms of the GNU General Public License as published by the > > + * Free Software Foundation; either version 2 of the License, or (at your > > + * option) any later version. > > OK, so this is some old, vendor crappy code. We do not have it since > some years! Yes :). > > > + * > > ... > > > + > > +static void axiom_i2c_poll(struct input_dev *input_dev) > > +{ > > + struct axiom_data *ts = input_get_drvdata(input_dev); > > + char *rx_data = ts->rx_buf; > > + > > + axiom_i2c_read(ts->client, REPORT_USAGE_ID, 0, rx_data, > > + ts->max_report_len); > > + axiom_process_report(ts, rx_data); > > +} > > + > > +/** > > + * Retrieve, store and print the axiom device information > > + */ > > +int axiom_discover(struct axiom_data *ts) > > This has to be static. ok. > > > +{ > > + char *rx_data = &ts->rx_buf[0]; > > + struct device *pdev = ts->pdev; > > + int ret; > > + > > + /* First the first page of u31 to get the device information and */ > > + /* the number of usages */ > > + ret = > > + axiom_i2c_read(ts->client, DEVINFO_USAGE_ID, 0, rx_data, > > + AX_U31_PAGE0_LENGTH); > > + if (ret) > > + return ret; > > + > > + axiom_get_dev_info(ts, rx_data); > > + > > + dev_dbg(pdev, "Data Decode:\n"); > > + dev_dbg(pdev, " Bootloader Mode: %u\n", ts->devinfo.bootloader_mode); > > + dev_dbg(pdev, " Device ID : %04x\n", ts->devinfo.device_id); > > + dev_dbg(pdev, " Firmware Rev : %02x.%02x\n", ts->devinfo.fw_major, > > + ts->devinfo.fw_minor); > > + dev_dbg(pdev, " Bootloader Rev : %02x.%02x\n", > > + ts->devinfo.bootloader_fw_ver_major, > > + ts->devinfo.bootloader_fw_ver_minor); > > + dev_dbg(pdev, " FW Extra Info : %04x\n", ts->devinfo.fw_info_extra); > > + dev_dbg(pdev, " Silicon : %02x\n", ts->devinfo.jedec_id); > > + dev_dbg(pdev, " Num Usages : %04x\n", ts->devinfo.num_usages); > > + > > + /* Read the second page of u31 to get the usage table */ > > + ret = axiom_i2c_read(ts->client, DEVINFO_USAGE_ID, 1, rx_data, > > + (U31_BYTES_PER_USAGE * ts->devinfo.num_usages)); > > + if (ret) > > + return ret; > > + > > + ts->max_report_len = axiom_populate_usage_table(ts, rx_data); > > + dev_dbg(pdev, "Max Report Length: %u\n", ts->max_report_len); > > + > > + return 0; > > +} > > +EXPORT_SYMBOL_GPL(axiom_discover); > > Nope. > > > + > > +/** > > + * Rebaseline the touchscreen, effectively zero-ing it > > + */ > > +void axiom_rebaseline(struct axiom_data *ts) > > Missing static. > > > +{ > > + struct device *pdev = ts->pdev; > > + char buffer[8] = { 0 }; > > + int ret; > > + > > + memset(buffer, 0, sizeof(buffer)); > > + > > + buffer[0] = REBASELINE_CMD; > > + > > + ret = axiom_i2c_write(ts->client, 0x02, 0, buffer, sizeof(buffer)); > > + if (ret) > > + dev_err(pdev, "Rebaseline failed\n"); > > + > > + dev_info(pdev, "Capture Baseline Requested\n"); > > +} > > +EXPORT_SYMBOL_GPL(axiom_rebaseline); > > Nope. > > > + > > +static irqreturn_t axiom_irq(int irq, void *handle) > > +{ > > + struct axiom_data *ts = handle; > > + u8 *rx_data = &ts->rx_buf[0]; > > + > > + axiom_i2c_read(ts->client, REPORT_USAGE_ID, 0, rx_data, ts->max_report_len); > > + axiom_process_report(ts, rx_data); > > + > > + return IRQ_HANDLED; > > +} > > + > > +static int axiom_i2c_probe(struct i2c_client *client) > > +{ > > + struct axiom_data *ts; > > + struct device *pdev = &client->dev; > > + struct input_dev *input_dev; > > + int error; > > + int target; > > + > > + ts = devm_kzalloc(pdev, sizeof(*ts), GFP_KERNEL); > > + if (!ts) > > + return -ENOMEM; > > + > > + ts->irq_gpio = devm_gpiod_get_optional(pdev, "irq", GPIOD_IN); > > + if (IS_ERR(ts->irq_gpio)) { > > + error = PTR_ERR(ts->irq_gpio); > > + dev_err(pdev, "failed to request irq GPIO: %d", error); > > Heh... syntax is: return dev_err_probe() > > > + return error; > > + } > > + > > + ts->reset_gpio = devm_gpiod_get_optional(pdev, "reset", GPIOD_OUT_HIGH); > > You do not use this GPIO at all. Dead code, especially that you keep the > device in reset. This was absolutely never tested (unless with incorrect > DTS...). Actually this has been exclusively tested on a X86 platform with ACPI overrides however this still need to be fixed indeed. > > > + if (IS_ERR(ts->reset_gpio)) { > > + error = PTR_ERR(ts->reset_gpio); > > return dev_err_probe() > > > + dev_err(pdev, "failed to request reset GPIO: %d", error); > > + return error; > > + } > > + > > + if (ts->irq_gpio) { > > + error = > > + devm_request_threaded_irq(pdev, client->irq, NULL, > > + axiom_irq, > > + IRQF_TRIGGER_LOW | IRQF_ONESHOT, > > + "axiom_irq", ts); > > + if (error != 0) { > > + dev_err(pdev, "Failed to request IRQ %u (error: %d)\n", > > + client->irq, error); > > return dev_err_probe() > > > + return error; > > + } > > + } > > + > > + ts->client = client; > > + ts->pdev = pdev; > > + ts->usage_table_populated = false; > > + > > + i2c_set_clientdata(client, ts); > > + > > + axiom_discover(ts); > > + axiom_rebaseline(ts); > > + > > + input_dev = devm_input_allocate_device(ts->pdev); > > + if (!input_dev) { > > + dev_err(pdev, "Failed to allocate input device\n"); > > I don't think we print memory allocation failures. > > > + return -ENOMEM; > > + } > > + > > + input_dev->name = "TouchNetix aXiom Touchscreen"; > > + input_dev->phys = "input/axiom_ts"; > > + > > + /* Single Touch */ > > + input_set_abs_params(input_dev, ABS_X, 0, 65535, 0, 0); > > + input_set_abs_params(input_dev, ABS_Y, 0, 65535, 0, 0); > > + > > + /* Multi Touch */ > > + /* Min, Max, Fuzz (expected noise in px, try 4?) and Flat */ > > + input_set_abs_params(input_dev, ABS_MT_POSITION_X, 0, 65535, 0, 0); > > + /* Min, Max, Fuzz (expected noise in px, try 4?) and Flat */ > > + input_set_abs_params(input_dev, ABS_MT_POSITION_Y, 0, 65535, 0, 0); > > + input_set_abs_params(input_dev, ABS_MT_TOOL_TYPE, 0, MT_TOOL_MAX, 0, 0); > > + input_set_abs_params(input_dev, ABS_MT_DISTANCE, 0, 127, 0, 0); > > + input_set_abs_params(input_dev, ABS_MT_PRESSURE, 0, 127, 0, 0); > > + > > + /* Registers the axiom device as a touch screen instead of as a mouse pointer */ > > + input_mt_init_slots(input_dev, U41_MAX_TARGETS, INPUT_MT_DIRECT); > > + > > + input_set_capability(input_dev, EV_KEY, BTN_LEFT); > > + > > + /* Enables the raw data for up to 4 force channels to be sent to the */ > > + /* input subsystem */ > > + set_bit(EV_REL, input_dev->evbit); > > + set_bit(EV_MSC, input_dev->evbit); > > + /* Declare that we support "RAW" Miscellaneous events */ > > + set_bit(MSC_RAW, input_dev->mscbit); > > + > > + if (!ts->irq_gpio) { > > + error = input_setup_polling(input_dev, axiom_i2c_poll); > > + if (error) { > > + dev_err(ts->pdev, "Unable to set up polling: %d\n", > > + error); > > + return error; > > + } > > + input_set_poll_interval(input_dev, POLL_INTERVAL_DEFAULT_MS); > > + } > > + > > + error = input_register_device(input_dev); > > + if (error != 0) { > > + dev_err(ts->pdev, > > + "Could not register with Input Sub-system., error=%d\n", > > + error); > > + return error; > > + } > > + > > + ts->input_dev = input_dev; > > + input_set_drvdata(ts->input_dev, ts); > > + > > + dev_info(pdev, "AXIOM: I2C driver registered with Input Sub-System.\n"); > > Drop silly tracing messages. > > > + > > + /* Delay just a smidge before enabling the IRQ */ > > + udelay(10); > > ??? So where is the IRQ being enabled? This is confusing. This need to move before IRQ is enabled. > > > + > > + /* Ensure that all reports are initialised to not be present. */ > > + for (target = 0; target < U41_MAX_TARGETS; target++) > > + ts->targets[target].state = TARGET_STATE_NOT_PRESENT; > > + > > + return 0; > > +} > > + > > +static void axiom_i2c_remove(struct i2c_client *client) > > +{ > > + struct axiom_data *ts = i2c_get_clientdata(client); > > + > > + axiom_remove(ts); > > +} > > + > > +static const struct i2c_device_id axiom_i2c_id_table[] = { > > + {"ax54a"}, > > + {}, > > +}; > > + > > +MODULE_DEVICE_TABLE(i2c, axiom_i2c_id_table); > > + > > +static const struct of_device_id axiom_i2c_dt_ids[] = { > > + { > > + .compatible = "axiom,ax54a", > > That's not documented. And you would know it if you run basic checks > before sending patches upstream. > I was actually suprised to found not all touchscreen drivers have a documented binding and I know understand this is bad :) ! > Please run scripts/checkpatch.pl and fix reported warnings. Some > warnings can be ignored, but the code here looks like it needs a fix. > Feel free to get in touch if the warning is not clear. OK, actually those are the only checkpatch warnings reported: $ ./scripts/checkpatch.pl 0001-Input-add-driver-for-TouchNetix-aXiom-touchscreen.patch WARNING: DT binding docs and includes should be a separate patch. See: Documentation/devicetree/bindings/submitting-patches.rst WARNING: DT compatible string "axiom,ax54a" appears un-documented -- check ./Documentation/devicetree/bindings/ #954: FILE: drivers/input/touchscreen/axiom_i2c.c:326: + .compatible = "axiom,ax54a", total: 0 errors, 2 warnings, 916 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. > > > + .data = "axiom", > > Why? Actually not used, more clean up required. > > That's not readable. Indent it like in other drivers. > > > + }, > > + {} > > +}; > > + > > +MODULE_DEVICE_TABLE(of, axiom_i2c_dt_ids); > > + > > +static struct i2c_driver axiom_i2c_driver = { > > + .driver = { > > + .name = "axiom_i2c", > > + .of_match_table = of_match_ptr(axiom_i2c_dt_ids), > > Drop of_match_ptr(), it causes warnings in your code... Ok. > > > + }, > > + .id_table = axiom_i2c_id_table, > > + .probe = axiom_i2c_probe, > > + .remove = axiom_i2c_remove, > > +}; > > + > > +module_i2c_driver(axiom_i2c_driver); > > + > > +MODULE_AUTHOR("Kamel Bouhara <kamel.bouhara@bootlin.com>"); > > +MODULE_DESCRIPTION("aXiom touchscreen I2C bus driver"); > > +MODULE_LICENSE("GPL"); > > +MODULE_ALIAS("axiom"); > > Nope, you cannot have such alias and it is not even needed. Ack, thanks ! > > > Best regards, > Krzysztof > -- Kamel Bouhara, Bootlin Embedded Linux and kernel engineering https://bootlin.com
On 23-09-08, Kamel Bouhara wrote: > Add a new driver for the TouchNetix's aXiom family of > multi-touch controller. This driver only support i2c > and can be later adapted for SPI and USB support. > > Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com> > --- > .../devicetree/bindings/vendor-prefixes.yaml | 2 + > MAINTAINERS | 7 + > drivers/input/touchscreen/Kconfig | 11 + > drivers/input/touchscreen/Makefile | 1 + > drivers/input/touchscreen/axiom_core.c | 382 ++++++++++++++++++ > drivers/input/touchscreen/axiom_core.h | 140 +++++++ > drivers/input/touchscreen/axiom_i2c.c | 349 ++++++++++++++++ > 7 files changed, 892 insertions(+) > create mode 100644 drivers/input/touchscreen/axiom_core.c > create mode 100644 drivers/input/touchscreen/axiom_core.h > create mode 100644 drivers/input/touchscreen/axiom_i2c.c Do we really care about the usb/spi case? For simplicity I would merge the axiom_core.* into the axiom_i2c.c. > diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml > index 573578db9509..b0a3ed451f15 100644 > --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml > +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml > @@ -175,6 +175,8 @@ patternProperties: > "^awinic,.*": > description: Shanghai Awinic Technology Co., Ltd. > "^axentia,.*": > + description: TouchNetix > + "^axiom,.*": This looks odd, also the product is called Axiom but the manufacturer is TouchNetix, so the compatible should be "^touchnetix,.*". > description: Axentia Technologies AB > "^axis,.*": > description: Axis Communications AB > diff --git a/MAINTAINERS b/MAINTAINERS > index 389fe9e38884..43add48257d8 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -3373,6 +3373,13 @@ W: https://ez.analog.com/linux-software-drivers > F: Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml > F: drivers/hwmon/axi-fan-control.c > > +AXIOM I2C TOUCHSCREEN DRIVER > +M: Kamel Bouhara <kamel.bouhara@bootlin.com> > +L: linux-input@vger.kernel.org > +S: Maintained > +F: drivers/input/touchscreen/axiom_core.c > +F: drivers/input/touchscreen/axiom_i2.c > + > AXXIA I2C CONTROLLER > M: Krzysztof Adamski <krzysztof.adamski@nokia.com> > L: linux-i2c@vger.kernel.org > diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig > index e3e2324547b9..08a770a0c5e5 100644 > --- a/drivers/input/touchscreen/Kconfig > +++ b/drivers/input/touchscreen/Kconfig > @@ -150,6 +150,17 @@ config TOUCHSCREEN_AUO_PIXCIR > To compile this driver as a module, choose M here: the > module will be called auo-pixcir-ts. > > +config TOUCHSCREEN_AXIOM_I2C > + tristate "AXIOM based multi-touch panel controllers" "TouchNetix Axiom multi-touch controller" ? > + help > + Say Y here if you have a axiom touchscreen connected to > + your system. > + > + If unsure, say N. > + > + To compile this driver as a module, choose M here: the > + module will be called axiom_i2c. > + > config TOUCHSCREEN_BU21013 > tristate "BU21013 based touch panel controllers" > depends on I2C > diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile > index 62bd24f3ac8e..59a3234ddb09 100644 > --- a/drivers/input/touchscreen/Makefile > +++ b/drivers/input/touchscreen/Makefile > @@ -18,6 +18,7 @@ obj-$(CONFIG_TOUCHSCREEN_ADS7846) += ads7846.o > obj-$(CONFIG_TOUCHSCREEN_AR1021_I2C) += ar1021_i2c.o > obj-$(CONFIG_TOUCHSCREEN_ATMEL_MXT) += atmel_mxt_ts.o > obj-$(CONFIG_TOUCHSCREEN_AUO_PIXCIR) += auo-pixcir-ts.o > +obj-$(CONFIG_TOUCHSCREEN_AXIOM_I2C) += axiom_core.o axiom_i2c.o > obj-$(CONFIG_TOUCHSCREEN_BU21013) += bu21013_ts.o > obj-$(CONFIG_TOUCHSCREEN_BU21029) += bu21029_ts.o > obj-$(CONFIG_TOUCHSCREEN_CHIPONE_ICN8318) += chipone_icn8318.o > diff --git a/drivers/input/touchscreen/axiom_core.c b/drivers/input/touchscreen/axiom_core.c > new file mode 100644 > index 000000000000..d381afd7fb84 > --- /dev/null > +++ b/drivers/input/touchscreen/axiom_core.c > @@ -0,0 +1,382 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * TouchNetix aXiom Touchscreen Driver > + * > + * Copyright (C) 2020-2023 TouchNetix Ltd. > + * > + * Author(s): Mark Satterthwaite <mark.satterthwaite@touchnetix.com> > + * Pedro Torruella <pedro.torruella@touchnetix.com> > + * Bart Prescott <bartp@baasheep.co.uk> > + * Hannah Rossiter <hannah.rossiter@touchnetix.com> > + * > + */ > + > +#include <linux/crc16.h> > +#include <linux/device.h> > +#include <linux/input.h> > +#include <linux/input/mt.h> > +#include <linux/module.h> > +#include <linux/kernel.h> > +#include <linux/slab.h> > + > +#include "axiom_core.h" > + > +/** > + * Decodes and populates the local u31 structure. > + * Given a buffer of data read from page 0 of u31 in an aXiom device. > + */ > +void axiom_get_dev_info(struct axiom_data *ts, char *info) If we squash all together we can make this static, as well as all the other helpers below. IMHO the function could be renamed too, e.g. axiom_decode_info(). This allow us to drop the comment. > +{ > + struct axiom_devinfo *devinfo = &ts->devinfo; > + > + if (devinfo) { if (!devinfo) return; > + devinfo->bootloader_mode = ((info[1] & 0x80) != 0) ? 1 : 0; > + devinfo->device_id = ((info[1] & 0x7F) << 8) | info[0]; > + devinfo->fw_minor = info[2]; > + devinfo->fw_major = info[3]; > + devinfo->fw_info_extra = (info[4]) | (info[5] << 8); > + devinfo->bootloader_fw_ver_minor = info[6]; > + devinfo->bootloader_fw_ver_major = info[7]; > + devinfo->jedec_id = (info[8]) | (info[9] << 8); > + devinfo->num_usages = info[10]; > + devinfo->silicon_revision = info[11]; > + } > +} > +EXPORT_SYMBOL_GPL(axiom_get_dev_info); > + > +/** > + * Decodes and populates the local Usage Table. > + * Given a buffer of data read from page 1 onwards of u31 from an aXiom ^ u31 isn't really intuitive, since we use u(signed) but instead this stands for u(sage) here and there is a u(sage)32 as well which is even worse. > + * device. > + */ > +char axiom_populate_usage_table(struct axiom_data *ts, char *rx_data) > +{ > + u32 usage_id = 0; > + char max_report_len = 0; > + struct axiom_devinfo *device_info; > + struct usage_entry *usage_table; > + > + device_info = &ts->devinfo; > + usage_table = ts->usage_table; > + > + for (usage_id = 0; usage_id < device_info->num_usages; usage_id++) { > + u16 offset = (usage_id * U31_BYTES_PER_USAGE); > + char id = rx_data[offset + 0]; > + char start_page = rx_data[offset + 1]; > + char num_pages = rx_data[offset + 2]; > + char max_offset = ((rx_data[offset + 3] & 0x7F) + 1) * 2; > + > + /* Store the entry into the usage table */ > + usage_table[usage_id].id = id; > + usage_table[usage_id].is_report = ((num_pages == 0) ? 1 : 0); > + usage_table[usage_id].start_page = start_page; > + usage_table[usage_id].num_pages = num_pages; > + > + dev_dbg(ts->pdev, "Usage %2u Info: %*ph\n", usage_id, > + U31_BYTES_PER_USAGE, &rx_data[offset]); > + > + /* Identify the max report length the module will receive */ > + if ((usage_table[usage_id].is_report) > + && (max_offset > max_report_len)) > + max_report_len = max_offset; > + } > + ts->usage_table_populated = true; > + > + return max_report_len; > +} > +EXPORT_SYMBOL_GPL(axiom_populate_usage_table); With my suggestion below I'm not sure if we need this here. > + > +/** > + * Translate usage/page/offset triplet into physical address. > + * > + * @usage: groups of registers > + * @page: page to which the usage belongs to offset > + * @offset of the usage > + */ > +u16 > +usage_to_target_address(struct axiom_data *ts, char usage, char page, > + char offset) > +{ > + struct axiom_devinfo *device_info; > + struct usage_entry *usage_table; > + u16 target_address; > + u32 i; > + > + device_info = &ts->devinfo; > + usage_table = ts->usage_table; > + > + /* At the moment the convention is that u31 is always at physical address 0x0 */ > + if (!ts->usage_table_populated && (usage == DEVINFO_USAGE_ID)) { > + target_address = ((page << 8) + offset); > + } else if (ts->usage_table_populated) { > + for (i = 0; i < device_info->num_usages; i++) { > + if (usage_table[i].id == usage) { > + if (page < usage_table[i].num_pages) { > + target_address = > + ((usage_table[i].start_page + page) << 8) + offset; > + } else { > + target_address = 0xFFFF; > + dev_err(ts->pdev, > + "Invalid usage table! usage: %u, page: %u, offset: %u\n", > + usage, page, offset); > + } > + break; > + } > + } > + } else { > + target_address = 0xFFFF; > + dev_err(ts->pdev, "Unpopulated usage table for usage: %u\n", > + usage); > + } > + > + dev_dbg(ts->pdev, "target_address is 0x%04x for usage: %u page %u\n", > + target_address, usage, page); > + > + return target_address; > +} > +EXPORT_SYMBOL_GPL(usage_to_target_address); and this. > +void axiom_remove(struct axiom_data *ts) > +{ > + if (ts->usage_table) > + ts->usage_table_populated = false; > + > + if (ts->input_dev) > + input_unregister_device(ts->input_dev); > +} > +EXPORT_SYMBOL_GPL(axiom_remove); Just squash the drivers into one to keep it simple. Once there is a need for SPI/USB we can it it. > + > +/* > + * Support function to axiom_process_u41_report. > + * It generates input-subsystem events for every target. > + * After calling this function the caller shall issue > + * a Sync to the input sub-system. > + */ > +static bool > +axiom_process_u41_report_target(struct axiom_data *ts, > + struct axiom_target_report *target) > +{ > + struct input_dev *input_dev = ts->input_dev; > + enum axiom_target_state current_state; > + struct u41_target *target_prev_state; > + struct device *pdev = ts->pdev; > + bool update = false; > + int slot; > + > + /* Verify the target index */ > + if (target->index >= U41_MAX_TARGETS) { > + dev_dbg(pdev, "Invalid target index! %u\n", target->index); > + return false; > + } > + > + target_prev_state = &ts->targets[target->index]; > + > + current_state = > + ((target->present == 0) ? TARGET_STATE_NOT_PRESENT : (target->z >= > + 0) ? > + TARGET_STATE_TOUCHING : (target->z > PROX_LEVEL) > + && (target->z < 0) ? TARGET_STATE_HOVER : (target->z == > + PROX_LEVEL) ? > + TARGET_STATE_PROX : TARGET_STATE_NOT_PRESENT); > + if ((target_prev_state->state == current_state) > + && (target_prev_state->x == target->x) > + && (target_prev_state->y == target->y) > + && (target_prev_state->z == target->z)) { > + return false; > + } > + > + slot = target->index; > + > + dev_dbg(pdev, "U41 Target T%u, slot:%u present:%u, x:%u, y:%u, z:%d\n", > + target->index, slot, target->present, > + target->x, target->y, target->z); > + > + switch (current_state) { > + default: > + case TARGET_STATE_NOT_PRESENT: > + case TARGET_STATE_PROX: > + { > + if (target_prev_state->insert) { > + update = true; > + target_prev_state->insert = false; > + input_mt_slot(input_dev, slot); > + > + if (slot == 0) > + input_report_key(input_dev, BTN_LEFT, > + 0); > + > + input_mt_report_slot_inactive(input_dev); > + /* make sure the previous coordinates are all off */ > + /* screen when the finger comes back */ > + target->x = target->y = 65535; > + target->z = PROX_LEVEL; > + } > + break; > + } > + case TARGET_STATE_HOVER: > + case TARGET_STATE_TOUCHING: > + { > + target_prev_state->insert = true; > + update = true; > + input_mt_slot(input_dev, slot); > + input_report_abs(input_dev, ABS_MT_TRACKING_ID, slot); > + input_report_abs(input_dev, ABS_MT_POSITION_X, > + target->x); > + input_report_abs(input_dev, ABS_X, target->x); > + input_report_abs(input_dev, ABS_MT_POSITION_Y, > + target->y); > + input_report_abs(input_dev, ABS_Y, target->y); > + > + if (current_state == TARGET_STATE_TOUCHING) { > + input_report_abs(input_dev, ABS_MT_DISTANCE, 0); > + input_report_abs(input_dev, ABS_DISTANCE, 0); > + input_report_abs(input_dev, ABS_MT_PRESSURE, > + target->z); > + input_report_abs(input_dev, ABS_PRESSURE, > + target->z); > + } else { > + input_report_abs(input_dev, ABS_MT_DISTANCE, > + -target->z); > + input_report_abs(input_dev, ABS_DISTANCE, > + -target->z); > + input_report_abs(input_dev, ABS_MT_PRESSURE, 0); > + input_report_abs(input_dev, ABS_PRESSURE, 0); > + } > + > + if (slot == 0) > + input_report_key(input_dev, BTN_LEFT, > + (current_state == > + TARGET_STATE_TOUCHING)); > + > + break; > + } > + } > + > + target_prev_state->state = current_state; > + target_prev_state->x = target->x; > + target_prev_state->y = target->y; > + target_prev_state->z = target->z; > + > + if (update) > + input_mt_sync_frame(input_dev); > + > + return update; > +} > + > +/** > + * Take a raw buffer with u41 report data and decode it. > + * Also generate input events if needed. > + * @rx_buf: ptr to a byte array [0]: Usage number [1]: Status LSB [2]: Status MSB > + */ > +void axiom_process_u41_report(struct axiom_data *ts, char *rx_buf) > +{ > + struct axiom_target_report target; > + struct input_dev *input_dev = ts->input_dev; > + bool update_done = false; > + u16 target_status; > + u32 i; > + > + if (rx_buf[0] != 0x41) { > + dev_err(ts->pdev, > + "Data in buffer does not have expected u41 format.\n"); > + return; > + } > + > + target_status = ((rx_buf[1]) | (rx_buf[2] << 8)); > + > + for (i = 0; i < U41_MAX_TARGETS; i++) { > + target.index = i; > + target.present = ((target_status & (1 << i)) != 0) ? 1 : 0; > + target.x = (rx_buf[(i * 4) + 3]) | (rx_buf[(i * 4) + 4] << 8); > + target.y = (rx_buf[(i * 4) + 5]) | (rx_buf[(i * 4) + 6] << 8); > + target.z = (s8) (rx_buf[i + 43]); > + update_done |= axiom_process_u41_report_target(ts, &target); > + } > + > + if (update_done) > + input_sync(input_dev); > +} > +EXPORT_SYMBOL_GPL(axiom_process_u41_report); > + > +void axiom_process_u46_report(struct axiom_data *ts, char *rx_buf) > +{ > + struct input_dev *input_dev = ts->input_dev; > + u16 aux_value; > + u32 event_value; > + u32 i = 0; > + > + for (i = 0; i < U46_AUX_CHANNELS; i++) { > + aux_value = > + ((rx_buf[(i * 2) + 2] << 8) | (rx_buf[(i * 2) + 1])) & > + U46_AUX_MASK; > + event_value = (i << 16) | (aux_value); > + input_event(input_dev, EV_MSC, MSC_RAW, event_value); > + } > + > + input_mt_sync(input_dev); > + input_sync(input_dev); > +} > +EXPORT_SYMBOL_GPL(axiom_process_u46_report); > + > +/** > + * Support function to axiom_process_report. > + * It validates the crc and multiplexes the axiom reports to the appropriate > + * report handler > + */ > +void axiom_process_report(struct axiom_data *ts, char *report_data) > +{ > + struct device *pdev = ts->pdev; > + char usage = report_data[1]; > + u16 crc_report; > + u16 crc_calc; > + char len; > + > + if ((report_data[0] & COMMS_OVERFLOW_MSK) != 0) > + ts->report_overflow_counter++; > + > + len = (report_data[0] & COMMS_REPORT_LEN_MSK) << 1; > + if (len == 0) { > + dev_err(pdev, "Zero length report discarded.\n"); > + return; > + } > + > + dev_dbg(pdev, "Payload Data %*ph\n", len, report_data); > + > + /* Validate the report CRC */ > + crc_report = (report_data[len - 1] << 8) | (report_data[len - 2]); > + /* Length is in 16 bit words and remove the size of the CRC16 itself */ > + crc_calc = crc16(0, report_data, (len - 2)); > + > + if (crc_calc != crc_report) { > + dev_err(pdev, > + "CRC mismatch! Expected: %#x, Calculated CRC: %#x.\n", > + crc_report, crc_calc); > + return; > + } > + > + switch (usage) { > + case USAGE_2DCTS_REPORT_ID: > + axiom_process_u41_report(ts, &report_data[1]); > + break; > + > + case USAGE_2AUX_REPORT_ID: > + /* This is an aux report (force) */ > + axiom_process_u46_report(ts, &report_data[1]); > + break; > + > + case USAGE_2HB_REPORT_ID: > + /* This is a heartbeat report */ > + break; > + > + default: > + break; > + } > + > + ts->report_counter++; > +} > +EXPORT_SYMBOL_GPL(axiom_process_report); > + > +MODULE_AUTHOR("Kamel Bouhara <kamel.bouhara@bootlin.com>"); > +MODULE_DESCRIPTION("aXiom touchscreen core logic"); > +MODULE_LICENSE("GPL"); > +MODULE_ALIAS("axiom"); > diff --git a/drivers/input/touchscreen/axiom_core.h b/drivers/input/touchscreen/axiom_core.h > new file mode 100644 > index 000000000000..f129d28671ff > --- /dev/null > +++ b/drivers/input/touchscreen/axiom_core.h > @@ -0,0 +1,140 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > +/* > + * TouchNetix aXiom Touchscreen Driver > + * > + * Copyright (C) 2020-2023 TouchNetix Ltd. > + * > + * Author(s): Mark Satterthwaite <mark.satterthwaite@touchnetix.com> > + * Pedro Torruella <pedro.torruella@touchnetix.com> > + * Bart Prescott <bartp@baasheep.co.uk> > + * Hannah Rossiter <hannah.rossiter@touchnetix.com> > + * > + * This program is free software; you can redistribute it and/or modify it > + * under the terms of the GNU General Public License as published by the > + * Free Software Foundation; either version 2 of the License, or (at your > + * option) any later version. > + * > + */ > + > +#ifndef __AXIOM_CORE_H > +#define __AXIOM_CORE_H > + > +/* Enables the raw data for up to 4 force channels to be sent to the input subsystem */ > +#define U46_ENABLE_RAW_FORCE_DATA > + > +/** > + * u31 has 2 pages for usage table entries. > + * (2 * AX_COMMS_PAGE_SIZE) / U31_BYTES_PER_USAGE = 85 > + */ > +#define U31_MAX_USAGES (85U) > +#define U41_MAX_TARGETS (10U) > +#define U46_AUX_CHANNELS (4U) > +#define U46_AUX_MASK (0xFFFU) > +#define U31_BYTES_PER_USAGE (6U) > +#define USAGE_2DCTS_REPORT_ID (0x41U) > +#define USAGE_2AUX_REPORT_ID (0x46U) > +#define USAGE_2HB_REPORT_ID (0x01U) > +#define PROX_LEVEL (-128) > +#define AX_U31_PAGE0_LENGTH (0x0C) > +#define AX_COMMS_WRITE (0x00U) > +#define AX_COMMS_READ (0x80U) > +#define AX_COMMS_BYTES_MASK (0xFFU) > + > +#define DEVINFO_USAGE_ID 0x31 > +#define REPORT_USAGE_ID 0x34 > + > +#define REBASELINE_CMD 0x03 > + > +#define COMMS_MAX_USAGE_PAGES (3) > +#define AX_COMMS_PAGE_SIZE (256) > + > +#define COMMS_OVERFLOW_MSK (0x80) > +#define COMMS_REPORT_LEN_MSK (0x7F) The defines look not good, please use proper kernel coding style. Also I'm not sure if we should follow the downstream solution here. Of course there is this concept of usages, pages and offsets: / reg0 (0x0) / page-0 (0x0) -------+ reg1 (0x1) | | ... u(sage)31 --+ page-1 (0x1) \ reg127 (0xff) | \ page-2 (0x2) But in the end it is just a 16bit register and we can access is partially. We only need to know the register, the len-bytes we have to read/write and the reg-mask we may need to apply. #define AXIOM_PAGE_MASK GENMASK(15, 8) #define AXIOM_PAGE_OFFSET_MASK GENMASK(7, 0) struct axiom_reg { u16 reg; u16 len; u32 mask; } #define AXIOM_REG(_page, _offset_bytes, _len_bytes, _mask) { \ .reg = FIELD_PREP(AXIOM_PAGE_MASK, _page) | \ FIELD_PREP(AXIOM_PAGE_OFFSET_MASK, _offset_bytes), \ .len = _len_bytes, \ .mask =_ mask, \ } enum axiom_reg_desc { AXIOM_U31_DEVICE_ID, AXIOM_U31_MODE, AXIOM_U31_RUTNIME_FW_VARIANT, AXIOM_U31_RUTNIME_FW_STATUS, }; static struct axiom_reg axiom_reg[] = { [AXIOM_U31_DEVICE_ID] = AXIOM_REG(0, 0, 2, GENMASK(14, 0)), [AXIOM_U31_MODE] = AXIOM_REG(0, 1, 1, BIT(7)), [AXIOM_U31_RUTNIME_FW_VARIANT] = AXIOM_REG(0, 4, 1, GENMASK(6, 0)), [AXIOM_U31_RUTNIME_FW_STATUS] = AXIOM_REG(0, 4, 1, BIT(7)), }; Of course this does not cover the event read case but all the other cases and would simplify the decoding or just use the common pattern like: #define AXIOM_REG(page, offset) \ (FIELD_PREP(AXIOM_PAGE_MASK, (page)) | \ FIELD_PREP(AXIOM_PAGE_OFFSET_MASK, (offset))) #define AXIOM_U31_DEVICE_ID_REG AXIOM_REG(0, 0) #define AXIOM_U31_DEVICE_ID_MASK GEMASK(14, 0) #define AXIOM_U31_MODE_REG AXIOM_REG(0, 1) #define AXIOM_U31_MODE_MASK BIT(7) #define AXIOM_U31_RUTNIME_FW_REG AXIOM_REG(0, 4) #define AXIOM_U31_RUTNIME_FW_STATUS_MASK BIT(7) #define AXIOM_U31_RUTNIME_FW_VARIANT_MASK GENMASK(6, 0) so in the end we can could use: - axiom_read(priv, AXIOM_U31_DEVICE_ID) or - axiom_read(priv, AXIOM_U31_DEVICE_ID_REG, 2); not sure which one does fit better but IMHO just copy the downstream version isn't the way we should go. Regards, Marco > +#include <linux/input.h> > + > +struct axiom_devinfo { > + char bootloader_fw_ver_major; > + char bootloader_fw_ver_minor; > + char bootloader_mode; > + u16 device_id; > + char fw_major; > + char fw_minor; > + u16 fw_info_extra; > + u16 jedec_id; > + char num_usages; > + char silicon_revision; > +}; > + > +/** > + * Describes parameters of a specific usage, essenstially a single element of > + * the "Usage Table" > + */ > +struct usage_entry { > + char id; > + char is_report; > + char start_page; > + char num_pages; > +}; > + > +/** > + * Holds state of a "Target", A.K.A. as a "touch", but called a target as it > + * can be a detected "target" prior to touch, eg, hovering. > + */ > +enum axiom_target_state { > + TARGET_STATE_NOT_PRESENT = 0, > + TARGET_STATE_PROX = 1, > + TARGET_STATE_HOVER = 2, > + TARGET_STATE_TOUCHING = 3, > + TARGET_STATE_MIN = TARGET_STATE_NOT_PRESENT, > + TARGET_STATE_MAX = TARGET_STATE_TOUCHING, > +}; > + > +struct u41_target { > + enum axiom_target_state state; > + u16 x; > + u16 y; > + s8 z; > + bool insert; > + bool touch; > +}; > + > +struct axiom_target_report { > + u8 index; > + u8 present; > + u16 x; > + u16 y; > + s8 z; > +}; > + > +struct axiom_cmd_header { > + u16 target_address; > + u16 length:15; > + u16 read:1; > + char write_data[]; > +}; > + > +struct axiom_data { > + struct axiom_devinfo devinfo; > + struct device *pdev; > + struct gpio_desc *reset_gpio; > + struct gpio_desc *irq_gpio; > + struct i2c_client *client; > + struct input_dev *input_dev; > + char max_report_len; > + u32 report_overflow_counter; > + u32 report_counter; > + char rx_buf[COMMS_MAX_USAGE_PAGES * AX_COMMS_PAGE_SIZE]; > + struct u41_target targets[U41_MAX_TARGETS]; > + struct usage_entry usage_table[U31_MAX_USAGES]; > + bool usage_table_populated; > +}; > + > +extern u16 usage_to_target_address(struct axiom_data *ts, char usage, > + char page, char offset); > +extern void axiom_process_report(struct axiom_data *ts, char *report_data); > +extern char axiom_populate_usage_table(struct axiom_data *ts, char *rx_data); > +extern void axiom_remove(struct axiom_data *ts); > +extern void axiom_get_dev_info(struct axiom_data *ts, char *info); > + > +#endif /* __AXIOM_CORE_H */ > diff --git a/drivers/input/touchscreen/axiom_i2c.c b/drivers/input/touchscreen/axiom_i2c.c > new file mode 100644 > index 000000000000..ddb898ad3744 > --- /dev/null > +++ b/drivers/input/touchscreen/axiom_i2c.c > @@ -0,0 +1,349 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * TouchNetix aXiom Touchscreen Driver > + * > + * Copyright (C) 2020-2023 TouchNetix Ltd. > + * > + * Author(s): Bart Prescott <bartp@baasheep.co.uk> > + * Pedro Torruella <pedro.torruella@touchnetix.com> > + * Mark Satterthwaite <mark.satterthwaite@touchnetix.com> > + * Hannah Rossiter <hannah.rossiter@touchnetix.com> > + * > + */ > + > +#include "axiom_core.h" > + > +#include <linux/delay.h> > +#include <linux/gpio/consumer.h> > +#include <linux/i2c.h> > +#include <linux/input.h> > +#include <linux/input/mt.h> > +#include <linux/interrupt.h> > +#include <linux/irqreturn.h> > +#include <linux/kernel.h> > +#include <linux/kobject.h> > +#include <linux/module.h> > +#include <linux/of.h> > +#include <linux/pm.h> > +#include <linux/string.h> > + > +/** > + * aXiom devices are typically configured to report > + * touches at a rate of 100Hz (10ms). For systems > + * that require polling for reports, 100ms seems like > + * an acceptable polling rate. > + * When reports are polled, it will be expected to > + * occasionally observe the overflow bit being set > + * in the reports. This indicates that reports are not > + * being read fast enough. > + */ > +#define POLL_INTERVAL_DEFAULT_MS 100 > + > +static int > +axiom_i2c_read(struct i2c_client *client, u8 usage, u8 page, u8 *buf, u16 len) > +{ > + struct axiom_cmd_header cmd_header; > + struct axiom_data *ts = i2c_get_clientdata(client); > + struct i2c_msg msg[2]; > + int ret; > + > + /* Build the header */ > + cmd_header.target_address = usage_to_target_address(ts, usage, page, 0); > + cmd_header.length = len; > + cmd_header.read = 1; > + > + msg[0].addr = client->addr; > + msg[0].flags = 0; > + msg[0].len = sizeof(cmd_header); > + msg[0].buf = (u8 *)&cmd_header; > + > + msg[1].addr = client->addr; > + msg[1].flags = I2C_M_RD; > + msg[1].len = len; > + msg[1].buf = (char *)buf; > + > + ret = i2c_transfer(client->adapter, msg, 2); > + if (ret != ARRAY_SIZE(msg)) { > + dev_err(&client->dev, > + "Failed reading usage %#x page %#x, error=%d\n", usage, > + page, ret); > + return -EIO; > + } > + > + return 0; > +} > + > +static int > +axiom_i2c_write(struct i2c_client *client, u8 usage, u8 page, u8 *buf, u16 len) > +{ > + struct axiom_cmd_header cmd_header; > + struct axiom_data *ts = i2c_get_clientdata(client); > + struct i2c_msg msg[2]; > + int ret; > + > + cmd_header.target_address = usage_to_target_address(ts, usage, page, 0); > + cmd_header.length = len; > + cmd_header.read = 0; > + > + msg[0].addr = client->addr; > + msg[0].flags = 0; > + msg[0].len = sizeof(cmd_header); > + msg[0].buf = (u8 *)&cmd_header; > + > + msg[1].addr = client->addr; > + msg[1].flags = 0; > + msg[1].len = len; > + msg[1].buf = (char *)buf; > + > + ret = i2c_transfer(client->adapter, msg, 2); > + if (ret != 2) { > + dev_err(&client->dev, > + "Failed to write usage %#x page %#x, error=%d\n", usage, > + page, ret); > + return ret; > + } > + > + return 0; > +} > + > +static void axiom_i2c_poll(struct input_dev *input_dev) > +{ > + struct axiom_data *ts = input_get_drvdata(input_dev); > + char *rx_data = ts->rx_buf; > + > + axiom_i2c_read(ts->client, REPORT_USAGE_ID, 0, rx_data, > + ts->max_report_len); > + axiom_process_report(ts, rx_data); > +} > + > +/** > + * Retrieve, store and print the axiom device information > + */ > +int axiom_discover(struct axiom_data *ts) > +{ > + char *rx_data = &ts->rx_buf[0]; > + struct device *pdev = ts->pdev; > + int ret; > + > + /* First the first page of u31 to get the device information and */ > + /* the number of usages */ > + ret = > + axiom_i2c_read(ts->client, DEVINFO_USAGE_ID, 0, rx_data, > + AX_U31_PAGE0_LENGTH); > + if (ret) > + return ret; > + > + axiom_get_dev_info(ts, rx_data); > + > + dev_dbg(pdev, "Data Decode:\n"); > + dev_dbg(pdev, " Bootloader Mode: %u\n", ts->devinfo.bootloader_mode); > + dev_dbg(pdev, " Device ID : %04x\n", ts->devinfo.device_id); > + dev_dbg(pdev, " Firmware Rev : %02x.%02x\n", ts->devinfo.fw_major, > + ts->devinfo.fw_minor); > + dev_dbg(pdev, " Bootloader Rev : %02x.%02x\n", > + ts->devinfo.bootloader_fw_ver_major, > + ts->devinfo.bootloader_fw_ver_minor); > + dev_dbg(pdev, " FW Extra Info : %04x\n", ts->devinfo.fw_info_extra); > + dev_dbg(pdev, " Silicon : %02x\n", ts->devinfo.jedec_id); > + dev_dbg(pdev, " Num Usages : %04x\n", ts->devinfo.num_usages); > + > + /* Read the second page of u31 to get the usage table */ > + ret = axiom_i2c_read(ts->client, DEVINFO_USAGE_ID, 1, rx_data, > + (U31_BYTES_PER_USAGE * ts->devinfo.num_usages)); > + if (ret) > + return ret; > + > + ts->max_report_len = axiom_populate_usage_table(ts, rx_data); > + dev_dbg(pdev, "Max Report Length: %u\n", ts->max_report_len); > + > + return 0; > +} > +EXPORT_SYMBOL_GPL(axiom_discover); > + > +/** > + * Rebaseline the touchscreen, effectively zero-ing it > + */ > +void axiom_rebaseline(struct axiom_data *ts) > +{ > + struct device *pdev = ts->pdev; > + char buffer[8] = { 0 }; > + int ret; > + > + memset(buffer, 0, sizeof(buffer)); > + > + buffer[0] = REBASELINE_CMD; > + > + ret = axiom_i2c_write(ts->client, 0x02, 0, buffer, sizeof(buffer)); > + if (ret) > + dev_err(pdev, "Rebaseline failed\n"); > + > + dev_info(pdev, "Capture Baseline Requested\n"); > +} > +EXPORT_SYMBOL_GPL(axiom_rebaseline); > + > +static irqreturn_t axiom_irq(int irq, void *handle) > +{ > + struct axiom_data *ts = handle; > + u8 *rx_data = &ts->rx_buf[0]; > + > + axiom_i2c_read(ts->client, REPORT_USAGE_ID, 0, rx_data, ts->max_report_len); > + axiom_process_report(ts, rx_data); > + > + return IRQ_HANDLED; > +} > + > +static int axiom_i2c_probe(struct i2c_client *client) > +{ > + struct axiom_data *ts; > + struct device *pdev = &client->dev; > + struct input_dev *input_dev; > + int error; > + int target; > + > + ts = devm_kzalloc(pdev, sizeof(*ts), GFP_KERNEL); > + if (!ts) > + return -ENOMEM; > + > + ts->irq_gpio = devm_gpiod_get_optional(pdev, "irq", GPIOD_IN); > + if (IS_ERR(ts->irq_gpio)) { > + error = PTR_ERR(ts->irq_gpio); > + dev_err(pdev, "failed to request irq GPIO: %d", error); > + return error; > + } > + > + ts->reset_gpio = devm_gpiod_get_optional(pdev, "reset", GPIOD_OUT_HIGH); > + if (IS_ERR(ts->reset_gpio)) { > + error = PTR_ERR(ts->reset_gpio); > + dev_err(pdev, "failed to request reset GPIO: %d", error); > + return error; > + } > + > + if (ts->irq_gpio) { > + error = > + devm_request_threaded_irq(pdev, client->irq, NULL, > + axiom_irq, > + IRQF_TRIGGER_LOW | IRQF_ONESHOT, > + "axiom_irq", ts); > + if (error != 0) { > + dev_err(pdev, "Failed to request IRQ %u (error: %d)\n", > + client->irq, error); > + return error; > + } > + } > + > + ts->client = client; > + ts->pdev = pdev; > + ts->usage_table_populated = false; > + > + i2c_set_clientdata(client, ts); > + > + axiom_discover(ts); > + axiom_rebaseline(ts); > + > + input_dev = devm_input_allocate_device(ts->pdev); > + if (!input_dev) { > + dev_err(pdev, "Failed to allocate input device\n"); > + return -ENOMEM; > + } > + > + input_dev->name = "TouchNetix aXiom Touchscreen"; > + input_dev->phys = "input/axiom_ts"; > + > + /* Single Touch */ > + input_set_abs_params(input_dev, ABS_X, 0, 65535, 0, 0); > + input_set_abs_params(input_dev, ABS_Y, 0, 65535, 0, 0); > + > + /* Multi Touch */ > + /* Min, Max, Fuzz (expected noise in px, try 4?) and Flat */ > + input_set_abs_params(input_dev, ABS_MT_POSITION_X, 0, 65535, 0, 0); > + /* Min, Max, Fuzz (expected noise in px, try 4?) and Flat */ > + input_set_abs_params(input_dev, ABS_MT_POSITION_Y, 0, 65535, 0, 0); > + input_set_abs_params(input_dev, ABS_MT_TOOL_TYPE, 0, MT_TOOL_MAX, 0, 0); > + input_set_abs_params(input_dev, ABS_MT_DISTANCE, 0, 127, 0, 0); > + input_set_abs_params(input_dev, ABS_MT_PRESSURE, 0, 127, 0, 0); > + > + /* Registers the axiom device as a touch screen instead of as a mouse pointer */ > + input_mt_init_slots(input_dev, U41_MAX_TARGETS, INPUT_MT_DIRECT); > + > + input_set_capability(input_dev, EV_KEY, BTN_LEFT); > + > + /* Enables the raw data for up to 4 force channels to be sent to the */ > + /* input subsystem */ > + set_bit(EV_REL, input_dev->evbit); > + set_bit(EV_MSC, input_dev->evbit); > + /* Declare that we support "RAW" Miscellaneous events */ > + set_bit(MSC_RAW, input_dev->mscbit); > + > + if (!ts->irq_gpio) { > + error = input_setup_polling(input_dev, axiom_i2c_poll); > + if (error) { > + dev_err(ts->pdev, "Unable to set up polling: %d\n", > + error); > + return error; > + } > + input_set_poll_interval(input_dev, POLL_INTERVAL_DEFAULT_MS); > + } > + > + error = input_register_device(input_dev); > + if (error != 0) { > + dev_err(ts->pdev, > + "Could not register with Input Sub-system., error=%d\n", > + error); > + return error; > + } > + > + ts->input_dev = input_dev; > + input_set_drvdata(ts->input_dev, ts); > + > + dev_info(pdev, "AXIOM: I2C driver registered with Input Sub-System.\n"); > + > + /* Delay just a smidge before enabling the IRQ */ > + udelay(10); > + > + /* Ensure that all reports are initialised to not be present. */ > + for (target = 0; target < U41_MAX_TARGETS; target++) > + ts->targets[target].state = TARGET_STATE_NOT_PRESENT; > + > + return 0; > +} > + > +static void axiom_i2c_remove(struct i2c_client *client) > +{ > + struct axiom_data *ts = i2c_get_clientdata(client); > + > + axiom_remove(ts); > +} > + > +static const struct i2c_device_id axiom_i2c_id_table[] = { > + {"ax54a"}, > + {}, > +}; > + > +MODULE_DEVICE_TABLE(i2c, axiom_i2c_id_table); > + > +static const struct of_device_id axiom_i2c_dt_ids[] = { > + { > + .compatible = "axiom,ax54a", > + .data = "axiom", > + }, > + {} > +}; > + > +MODULE_DEVICE_TABLE(of, axiom_i2c_dt_ids); > + > +static struct i2c_driver axiom_i2c_driver = { > + .driver = { > + .name = "axiom_i2c", > + .of_match_table = of_match_ptr(axiom_i2c_dt_ids), > + }, > + .id_table = axiom_i2c_id_table, > + .probe = axiom_i2c_probe, > + .remove = axiom_i2c_remove, > +}; > + > +module_i2c_driver(axiom_i2c_driver); > + > +MODULE_AUTHOR("Kamel Bouhara <kamel.bouhara@bootlin.com>"); > +MODULE_DESCRIPTION("aXiom touchscreen I2C bus driver"); > +MODULE_LICENSE("GPL"); > +MODULE_ALIAS("axiom"); > -- > 2.25.1 >
Hi Kamel, On 23-09-18, Marco Felsch wrote: > On 23-09-08, Kamel Bouhara wrote: > > Add a new driver for the TouchNetix's aXiom family of > > multi-touch controller. This driver only support i2c > > and can be later adapted for SPI and USB support. > > > > Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com> > > --- > > .../devicetree/bindings/vendor-prefixes.yaml | 2 + > > MAINTAINERS | 7 + > > drivers/input/touchscreen/Kconfig | 11 + > > drivers/input/touchscreen/Makefile | 1 + > > drivers/input/touchscreen/axiom_core.c | 382 ++++++++++++++++++ > > drivers/input/touchscreen/axiom_core.h | 140 +++++++ > > drivers/input/touchscreen/axiom_i2c.c | 349 ++++++++++++++++ > > 7 files changed, 892 insertions(+) > > create mode 100644 drivers/input/touchscreen/axiom_core.c > > create mode 100644 drivers/input/touchscreen/axiom_core.h > > create mode 100644 drivers/input/touchscreen/axiom_i2c.c ... > > +/* Enables the raw data for up to 4 force channels to be sent to the input subsystem */ > > +#define U46_ENABLE_RAW_FORCE_DATA > > + > > +/** > > + * u31 has 2 pages for usage table entries. > > + * (2 * AX_COMMS_PAGE_SIZE) / U31_BYTES_PER_USAGE = 85 > > + */ > > +#define U31_MAX_USAGES (85U) > > +#define U41_MAX_TARGETS (10U) > > +#define U46_AUX_CHANNELS (4U) > > +#define U46_AUX_MASK (0xFFFU) > > +#define U31_BYTES_PER_USAGE (6U) > > +#define USAGE_2DCTS_REPORT_ID (0x41U) > > +#define USAGE_2AUX_REPORT_ID (0x46U) > > +#define USAGE_2HB_REPORT_ID (0x01U) > > +#define PROX_LEVEL (-128) > > +#define AX_U31_PAGE0_LENGTH (0x0C) > > +#define AX_COMMS_WRITE (0x00U) > > +#define AX_COMMS_READ (0x80U) > > +#define AX_COMMS_BYTES_MASK (0xFFU) > > + > > +#define DEVINFO_USAGE_ID 0x31 > > +#define REPORT_USAGE_ID 0x34 > > + > > +#define REBASELINE_CMD 0x03 > > + > > +#define COMMS_MAX_USAGE_PAGES (3) > > +#define AX_COMMS_PAGE_SIZE (256) > > + > > +#define COMMS_OVERFLOW_MSK (0x80) > > +#define COMMS_REPORT_LEN_MSK (0x7F) > > The defines look not good, please use proper kernel coding style. Also > I'm not sure if we should follow the downstream solution here. Of course > there is this concept of usages, pages and offsets: > > / reg0 (0x0) > / page-0 (0x0) -------+ reg1 (0x1) > | | ... > u(sage)31 --+ page-1 (0x1) \ reg127 (0xff) > | > \ page-2 (0x2) > > But in the end it is just a 16bit register and we can access is > partially. We only need to know the register, the len-bytes we have to > read/write and the reg-mask we may need to apply. > > #define AXIOM_PAGE_MASK GENMASK(15, 8) > #define AXIOM_PAGE_OFFSET_MASK GENMASK(7, 0) > > struct axiom_reg { > u16 reg; > u16 len; > u32 mask; > } > > #define AXIOM_REG(_page, _offset_bytes, _len_bytes, _mask) { \ > .reg = FIELD_PREP(AXIOM_PAGE_MASK, _page) | \ > FIELD_PREP(AXIOM_PAGE_OFFSET_MASK, _offset_bytes), \ > .len = _len_bytes, \ > .mask =_ mask, \ > } > > enum axiom_reg_desc { > AXIOM_U31_DEVICE_ID, > AXIOM_U31_MODE, > AXIOM_U31_RUTNIME_FW_VARIANT, > AXIOM_U31_RUTNIME_FW_STATUS, > }; > > static struct axiom_reg axiom_reg[] = { > [AXIOM_U31_DEVICE_ID] = AXIOM_REG(0, 0, 2, GENMASK(14, 0)), > [AXIOM_U31_MODE] = AXIOM_REG(0, 1, 1, BIT(7)), > [AXIOM_U31_RUTNIME_FW_VARIANT] = AXIOM_REG(0, 4, 1, GENMASK(6, 0)), > [AXIOM_U31_RUTNIME_FW_STATUS] = AXIOM_REG(0, 4, 1, BIT(7)), > }; > > Of course this does not cover the event read case but all the other > cases and would simplify the decoding or just use the common pattern > like: > > #define AXIOM_REG(page, offset) \ > (FIELD_PREP(AXIOM_PAGE_MASK, (page)) | \ > FIELD_PREP(AXIOM_PAGE_OFFSET_MASK, (offset))) > > #define AXIOM_U31_DEVICE_ID_REG AXIOM_REG(0, 0) > #define AXIOM_U31_DEVICE_ID_MASK GEMASK(14, 0) > > #define AXIOM_U31_MODE_REG AXIOM_REG(0, 1) > #define AXIOM_U31_MODE_MASK BIT(7) > > #define AXIOM_U31_RUTNIME_FW_REG AXIOM_REG(0, 4) > #define AXIOM_U31_RUTNIME_FW_STATUS_MASK BIT(7) > #define AXIOM_U31_RUTNIME_FW_VARIANT_MASK GENMASK(6, 0) > > so in the end we can could use: > > - axiom_read(priv, AXIOM_U31_DEVICE_ID) or > - axiom_read(priv, AXIOM_U31_DEVICE_ID_REG, 2); After getting a bit more into the details I saw that this can't be used as I suggested since a few commands require parameters and an i2c-stop/start cycle in between corrupt the command. So we really need to use AXIOM_Uxx pages/registers. For this I still suggest to not bang on buffers like: bootloader_fw_ver_major = data[offset] bootloader_fw_ver_minor = data[offset++] Instead we should add headers to access/prepare the data more user-friendly. Regards, Marco
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 573578db9509..b0a3ed451f15 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -175,6 +175,8 @@ patternProperties: "^awinic,.*": description: Shanghai Awinic Technology Co., Ltd. "^axentia,.*": + description: TouchNetix + "^axiom,.*": description: Axentia Technologies AB "^axis,.*": description: Axis Communications AB diff --git a/MAINTAINERS b/MAINTAINERS index 389fe9e38884..43add48257d8 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3373,6 +3373,13 @@ W: https://ez.analog.com/linux-software-drivers F: Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml F: drivers/hwmon/axi-fan-control.c +AXIOM I2C TOUCHSCREEN DRIVER +M: Kamel Bouhara <kamel.bouhara@bootlin.com> +L: linux-input@vger.kernel.org +S: Maintained +F: drivers/input/touchscreen/axiom_core.c +F: drivers/input/touchscreen/axiom_i2.c + AXXIA I2C CONTROLLER M: Krzysztof Adamski <krzysztof.adamski@nokia.com> L: linux-i2c@vger.kernel.org diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index e3e2324547b9..08a770a0c5e5 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -150,6 +150,17 @@ config TOUCHSCREEN_AUO_PIXCIR To compile this driver as a module, choose M here: the module will be called auo-pixcir-ts. +config TOUCHSCREEN_AXIOM_I2C + tristate "AXIOM based multi-touch panel controllers" + help + Say Y here if you have a axiom touchscreen connected to + your system. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called axiom_i2c. + config TOUCHSCREEN_BU21013 tristate "BU21013 based touch panel controllers" depends on I2C diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 62bd24f3ac8e..59a3234ddb09 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -18,6 +18,7 @@ obj-$(CONFIG_TOUCHSCREEN_ADS7846) += ads7846.o obj-$(CONFIG_TOUCHSCREEN_AR1021_I2C) += ar1021_i2c.o obj-$(CONFIG_TOUCHSCREEN_ATMEL_MXT) += atmel_mxt_ts.o obj-$(CONFIG_TOUCHSCREEN_AUO_PIXCIR) += auo-pixcir-ts.o +obj-$(CONFIG_TOUCHSCREEN_AXIOM_I2C) += axiom_core.o axiom_i2c.o obj-$(CONFIG_TOUCHSCREEN_BU21013) += bu21013_ts.o obj-$(CONFIG_TOUCHSCREEN_BU21029) += bu21029_ts.o obj-$(CONFIG_TOUCHSCREEN_CHIPONE_ICN8318) += chipone_icn8318.o diff --git a/drivers/input/touchscreen/axiom_core.c b/drivers/input/touchscreen/axiom_core.c new file mode 100644 index 000000000000..d381afd7fb84 --- /dev/null +++ b/drivers/input/touchscreen/axiom_core.c @@ -0,0 +1,382 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * TouchNetix aXiom Touchscreen Driver + * + * Copyright (C) 2020-2023 TouchNetix Ltd. + * + * Author(s): Mark Satterthwaite <mark.satterthwaite@touchnetix.com> + * Pedro Torruella <pedro.torruella@touchnetix.com> + * Bart Prescott <bartp@baasheep.co.uk> + * Hannah Rossiter <hannah.rossiter@touchnetix.com> + * + */ + +#include <linux/crc16.h> +#include <linux/device.h> +#include <linux/input.h> +#include <linux/input/mt.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/slab.h> + +#include "axiom_core.h" + +/** + * Decodes and populates the local u31 structure. + * Given a buffer of data read from page 0 of u31 in an aXiom device. + */ +void axiom_get_dev_info(struct axiom_data *ts, char *info) +{ + struct axiom_devinfo *devinfo = &ts->devinfo; + + if (devinfo) { + devinfo->bootloader_mode = ((info[1] & 0x80) != 0) ? 1 : 0; + devinfo->device_id = ((info[1] & 0x7F) << 8) | info[0]; + devinfo->fw_minor = info[2]; + devinfo->fw_major = info[3]; + devinfo->fw_info_extra = (info[4]) | (info[5] << 8); + devinfo->bootloader_fw_ver_minor = info[6]; + devinfo->bootloader_fw_ver_major = info[7]; + devinfo->jedec_id = (info[8]) | (info[9] << 8); + devinfo->num_usages = info[10]; + devinfo->silicon_revision = info[11]; + } +} +EXPORT_SYMBOL_GPL(axiom_get_dev_info); + +/** + * Decodes and populates the local Usage Table. + * Given a buffer of data read from page 1 onwards of u31 from an aXiom + * device. + */ +char axiom_populate_usage_table(struct axiom_data *ts, char *rx_data) +{ + u32 usage_id = 0; + char max_report_len = 0; + struct axiom_devinfo *device_info; + struct usage_entry *usage_table; + + device_info = &ts->devinfo; + usage_table = ts->usage_table; + + for (usage_id = 0; usage_id < device_info->num_usages; usage_id++) { + u16 offset = (usage_id * U31_BYTES_PER_USAGE); + char id = rx_data[offset + 0]; + char start_page = rx_data[offset + 1]; + char num_pages = rx_data[offset + 2]; + char max_offset = ((rx_data[offset + 3] & 0x7F) + 1) * 2; + + /* Store the entry into the usage table */ + usage_table[usage_id].id = id; + usage_table[usage_id].is_report = ((num_pages == 0) ? 1 : 0); + usage_table[usage_id].start_page = start_page; + usage_table[usage_id].num_pages = num_pages; + + dev_dbg(ts->pdev, "Usage %2u Info: %*ph\n", usage_id, + U31_BYTES_PER_USAGE, &rx_data[offset]); + + /* Identify the max report length the module will receive */ + if ((usage_table[usage_id].is_report) + && (max_offset > max_report_len)) + max_report_len = max_offset; + } + ts->usage_table_populated = true; + + return max_report_len; +} +EXPORT_SYMBOL_GPL(axiom_populate_usage_table); + +/** + * Translate usage/page/offset triplet into physical address. + * + * @usage: groups of registers + * @page: page to which the usage belongs to offset + * @offset of the usage + */ +u16 +usage_to_target_address(struct axiom_data *ts, char usage, char page, + char offset) +{ + struct axiom_devinfo *device_info; + struct usage_entry *usage_table; + u16 target_address; + u32 i; + + device_info = &ts->devinfo; + usage_table = ts->usage_table; + + /* At the moment the convention is that u31 is always at physical address 0x0 */ + if (!ts->usage_table_populated && (usage == DEVINFO_USAGE_ID)) { + target_address = ((page << 8) + offset); + } else if (ts->usage_table_populated) { + for (i = 0; i < device_info->num_usages; i++) { + if (usage_table[i].id == usage) { + if (page < usage_table[i].num_pages) { + target_address = + ((usage_table[i].start_page + page) << 8) + offset; + } else { + target_address = 0xFFFF; + dev_err(ts->pdev, + "Invalid usage table! usage: %u, page: %u, offset: %u\n", + usage, page, offset); + } + break; + } + } + } else { + target_address = 0xFFFF; + dev_err(ts->pdev, "Unpopulated usage table for usage: %u\n", + usage); + } + + dev_dbg(ts->pdev, "target_address is 0x%04x for usage: %u page %u\n", + target_address, usage, page); + + return target_address; +} +EXPORT_SYMBOL_GPL(usage_to_target_address); + +void axiom_remove(struct axiom_data *ts) +{ + if (ts->usage_table) + ts->usage_table_populated = false; + + if (ts->input_dev) + input_unregister_device(ts->input_dev); +} +EXPORT_SYMBOL_GPL(axiom_remove); + +/* + * Support function to axiom_process_u41_report. + * It generates input-subsystem events for every target. + * After calling this function the caller shall issue + * a Sync to the input sub-system. + */ +static bool +axiom_process_u41_report_target(struct axiom_data *ts, + struct axiom_target_report *target) +{ + struct input_dev *input_dev = ts->input_dev; + enum axiom_target_state current_state; + struct u41_target *target_prev_state; + struct device *pdev = ts->pdev; + bool update = false; + int slot; + + /* Verify the target index */ + if (target->index >= U41_MAX_TARGETS) { + dev_dbg(pdev, "Invalid target index! %u\n", target->index); + return false; + } + + target_prev_state = &ts->targets[target->index]; + + current_state = + ((target->present == 0) ? TARGET_STATE_NOT_PRESENT : (target->z >= + 0) ? + TARGET_STATE_TOUCHING : (target->z > PROX_LEVEL) + && (target->z < 0) ? TARGET_STATE_HOVER : (target->z == + PROX_LEVEL) ? + TARGET_STATE_PROX : TARGET_STATE_NOT_PRESENT); + if ((target_prev_state->state == current_state) + && (target_prev_state->x == target->x) + && (target_prev_state->y == target->y) + && (target_prev_state->z == target->z)) { + return false; + } + + slot = target->index; + + dev_dbg(pdev, "U41 Target T%u, slot:%u present:%u, x:%u, y:%u, z:%d\n", + target->index, slot, target->present, + target->x, target->y, target->z); + + switch (current_state) { + default: + case TARGET_STATE_NOT_PRESENT: + case TARGET_STATE_PROX: + { + if (target_prev_state->insert) { + update = true; + target_prev_state->insert = false; + input_mt_slot(input_dev, slot); + + if (slot == 0) + input_report_key(input_dev, BTN_LEFT, + 0); + + input_mt_report_slot_inactive(input_dev); + /* make sure the previous coordinates are all off */ + /* screen when the finger comes back */ + target->x = target->y = 65535; + target->z = PROX_LEVEL; + } + break; + } + case TARGET_STATE_HOVER: + case TARGET_STATE_TOUCHING: + { + target_prev_state->insert = true; + update = true; + input_mt_slot(input_dev, slot); + input_report_abs(input_dev, ABS_MT_TRACKING_ID, slot); + input_report_abs(input_dev, ABS_MT_POSITION_X, + target->x); + input_report_abs(input_dev, ABS_X, target->x); + input_report_abs(input_dev, ABS_MT_POSITION_Y, + target->y); + input_report_abs(input_dev, ABS_Y, target->y); + + if (current_state == TARGET_STATE_TOUCHING) { + input_report_abs(input_dev, ABS_MT_DISTANCE, 0); + input_report_abs(input_dev, ABS_DISTANCE, 0); + input_report_abs(input_dev, ABS_MT_PRESSURE, + target->z); + input_report_abs(input_dev, ABS_PRESSURE, + target->z); + } else { + input_report_abs(input_dev, ABS_MT_DISTANCE, + -target->z); + input_report_abs(input_dev, ABS_DISTANCE, + -target->z); + input_report_abs(input_dev, ABS_MT_PRESSURE, 0); + input_report_abs(input_dev, ABS_PRESSURE, 0); + } + + if (slot == 0) + input_report_key(input_dev, BTN_LEFT, + (current_state == + TARGET_STATE_TOUCHING)); + + break; + } + } + + target_prev_state->state = current_state; + target_prev_state->x = target->x; + target_prev_state->y = target->y; + target_prev_state->z = target->z; + + if (update) + input_mt_sync_frame(input_dev); + + return update; +} + +/** + * Take a raw buffer with u41 report data and decode it. + * Also generate input events if needed. + * @rx_buf: ptr to a byte array [0]: Usage number [1]: Status LSB [2]: Status MSB + */ +void axiom_process_u41_report(struct axiom_data *ts, char *rx_buf) +{ + struct axiom_target_report target; + struct input_dev *input_dev = ts->input_dev; + bool update_done = false; + u16 target_status; + u32 i; + + if (rx_buf[0] != 0x41) { + dev_err(ts->pdev, + "Data in buffer does not have expected u41 format.\n"); + return; + } + + target_status = ((rx_buf[1]) | (rx_buf[2] << 8)); + + for (i = 0; i < U41_MAX_TARGETS; i++) { + target.index = i; + target.present = ((target_status & (1 << i)) != 0) ? 1 : 0; + target.x = (rx_buf[(i * 4) + 3]) | (rx_buf[(i * 4) + 4] << 8); + target.y = (rx_buf[(i * 4) + 5]) | (rx_buf[(i * 4) + 6] << 8); + target.z = (s8) (rx_buf[i + 43]); + update_done |= axiom_process_u41_report_target(ts, &target); + } + + if (update_done) + input_sync(input_dev); +} +EXPORT_SYMBOL_GPL(axiom_process_u41_report); + +void axiom_process_u46_report(struct axiom_data *ts, char *rx_buf) +{ + struct input_dev *input_dev = ts->input_dev; + u16 aux_value; + u32 event_value; + u32 i = 0; + + for (i = 0; i < U46_AUX_CHANNELS; i++) { + aux_value = + ((rx_buf[(i * 2) + 2] << 8) | (rx_buf[(i * 2) + 1])) & + U46_AUX_MASK; + event_value = (i << 16) | (aux_value); + input_event(input_dev, EV_MSC, MSC_RAW, event_value); + } + + input_mt_sync(input_dev); + input_sync(input_dev); +} +EXPORT_SYMBOL_GPL(axiom_process_u46_report); + +/** + * Support function to axiom_process_report. + * It validates the crc and multiplexes the axiom reports to the appropriate + * report handler + */ +void axiom_process_report(struct axiom_data *ts, char *report_data) +{ + struct device *pdev = ts->pdev; + char usage = report_data[1]; + u16 crc_report; + u16 crc_calc; + char len; + + if ((report_data[0] & COMMS_OVERFLOW_MSK) != 0) + ts->report_overflow_counter++; + + len = (report_data[0] & COMMS_REPORT_LEN_MSK) << 1; + if (len == 0) { + dev_err(pdev, "Zero length report discarded.\n"); + return; + } + + dev_dbg(pdev, "Payload Data %*ph\n", len, report_data); + + /* Validate the report CRC */ + crc_report = (report_data[len - 1] << 8) | (report_data[len - 2]); + /* Length is in 16 bit words and remove the size of the CRC16 itself */ + crc_calc = crc16(0, report_data, (len - 2)); + + if (crc_calc != crc_report) { + dev_err(pdev, + "CRC mismatch! Expected: %#x, Calculated CRC: %#x.\n", + crc_report, crc_calc); + return; + } + + switch (usage) { + case USAGE_2DCTS_REPORT_ID: + axiom_process_u41_report(ts, &report_data[1]); + break; + + case USAGE_2AUX_REPORT_ID: + /* This is an aux report (force) */ + axiom_process_u46_report(ts, &report_data[1]); + break; + + case USAGE_2HB_REPORT_ID: + /* This is a heartbeat report */ + break; + + default: + break; + } + + ts->report_counter++; +} +EXPORT_SYMBOL_GPL(axiom_process_report); + +MODULE_AUTHOR("Kamel Bouhara <kamel.bouhara@bootlin.com>"); +MODULE_DESCRIPTION("aXiom touchscreen core logic"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("axiom"); diff --git a/drivers/input/touchscreen/axiom_core.h b/drivers/input/touchscreen/axiom_core.h new file mode 100644 index 000000000000..f129d28671ff --- /dev/null +++ b/drivers/input/touchscreen/axiom_core.h @@ -0,0 +1,140 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * TouchNetix aXiom Touchscreen Driver + * + * Copyright (C) 2020-2023 TouchNetix Ltd. + * + * Author(s): Mark Satterthwaite <mark.satterthwaite@touchnetix.com> + * Pedro Torruella <pedro.torruella@touchnetix.com> + * Bart Prescott <bartp@baasheep.co.uk> + * Hannah Rossiter <hannah.rossiter@touchnetix.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __AXIOM_CORE_H +#define __AXIOM_CORE_H + +/* Enables the raw data for up to 4 force channels to be sent to the input subsystem */ +#define U46_ENABLE_RAW_FORCE_DATA + +/** + * u31 has 2 pages for usage table entries. + * (2 * AX_COMMS_PAGE_SIZE) / U31_BYTES_PER_USAGE = 85 + */ +#define U31_MAX_USAGES (85U) +#define U41_MAX_TARGETS (10U) +#define U46_AUX_CHANNELS (4U) +#define U46_AUX_MASK (0xFFFU) +#define U31_BYTES_PER_USAGE (6U) +#define USAGE_2DCTS_REPORT_ID (0x41U) +#define USAGE_2AUX_REPORT_ID (0x46U) +#define USAGE_2HB_REPORT_ID (0x01U) +#define PROX_LEVEL (-128) +#define AX_U31_PAGE0_LENGTH (0x0C) +#define AX_COMMS_WRITE (0x00U) +#define AX_COMMS_READ (0x80U) +#define AX_COMMS_BYTES_MASK (0xFFU) + +#define DEVINFO_USAGE_ID 0x31 +#define REPORT_USAGE_ID 0x34 + +#define REBASELINE_CMD 0x03 + +#define COMMS_MAX_USAGE_PAGES (3) +#define AX_COMMS_PAGE_SIZE (256) + +#define COMMS_OVERFLOW_MSK (0x80) +#define COMMS_REPORT_LEN_MSK (0x7F) + +#include <linux/input.h> + +struct axiom_devinfo { + char bootloader_fw_ver_major; + char bootloader_fw_ver_minor; + char bootloader_mode; + u16 device_id; + char fw_major; + char fw_minor; + u16 fw_info_extra; + u16 jedec_id; + char num_usages; + char silicon_revision; +}; + +/** + * Describes parameters of a specific usage, essenstially a single element of + * the "Usage Table" + */ +struct usage_entry { + char id; + char is_report; + char start_page; + char num_pages; +}; + +/** + * Holds state of a "Target", A.K.A. as a "touch", but called a target as it + * can be a detected "target" prior to touch, eg, hovering. + */ +enum axiom_target_state { + TARGET_STATE_NOT_PRESENT = 0, + TARGET_STATE_PROX = 1, + TARGET_STATE_HOVER = 2, + TARGET_STATE_TOUCHING = 3, + TARGET_STATE_MIN = TARGET_STATE_NOT_PRESENT, + TARGET_STATE_MAX = TARGET_STATE_TOUCHING, +}; + +struct u41_target { + enum axiom_target_state state; + u16 x; + u16 y; + s8 z; + bool insert; + bool touch; +}; + +struct axiom_target_report { + u8 index; + u8 present; + u16 x; + u16 y; + s8 z; +}; + +struct axiom_cmd_header { + u16 target_address; + u16 length:15; + u16 read:1; + char write_data[]; +}; + +struct axiom_data { + struct axiom_devinfo devinfo; + struct device *pdev; + struct gpio_desc *reset_gpio; + struct gpio_desc *irq_gpio; + struct i2c_client *client; + struct input_dev *input_dev; + char max_report_len; + u32 report_overflow_counter; + u32 report_counter; + char rx_buf[COMMS_MAX_USAGE_PAGES * AX_COMMS_PAGE_SIZE]; + struct u41_target targets[U41_MAX_TARGETS]; + struct usage_entry usage_table[U31_MAX_USAGES]; + bool usage_table_populated; +}; + +extern u16 usage_to_target_address(struct axiom_data *ts, char usage, + char page, char offset); +extern void axiom_process_report(struct axiom_data *ts, char *report_data); +extern char axiom_populate_usage_table(struct axiom_data *ts, char *rx_data); +extern void axiom_remove(struct axiom_data *ts); +extern void axiom_get_dev_info(struct axiom_data *ts, char *info); + +#endif /* __AXIOM_CORE_H */ diff --git a/drivers/input/touchscreen/axiom_i2c.c b/drivers/input/touchscreen/axiom_i2c.c new file mode 100644 index 000000000000..ddb898ad3744 --- /dev/null +++ b/drivers/input/touchscreen/axiom_i2c.c @@ -0,0 +1,349 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * TouchNetix aXiom Touchscreen Driver + * + * Copyright (C) 2020-2023 TouchNetix Ltd. + * + * Author(s): Bart Prescott <bartp@baasheep.co.uk> + * Pedro Torruella <pedro.torruella@touchnetix.com> + * Mark Satterthwaite <mark.satterthwaite@touchnetix.com> + * Hannah Rossiter <hannah.rossiter@touchnetix.com> + * + */ + +#include "axiom_core.h" + +#include <linux/delay.h> +#include <linux/gpio/consumer.h> +#include <linux/i2c.h> +#include <linux/input.h> +#include <linux/input/mt.h> +#include <linux/interrupt.h> +#include <linux/irqreturn.h> +#include <linux/kernel.h> +#include <linux/kobject.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/pm.h> +#include <linux/string.h> + +/** + * aXiom devices are typically configured to report + * touches at a rate of 100Hz (10ms). For systems + * that require polling for reports, 100ms seems like + * an acceptable polling rate. + * When reports are polled, it will be expected to + * occasionally observe the overflow bit being set + * in the reports. This indicates that reports are not + * being read fast enough. + */ +#define POLL_INTERVAL_DEFAULT_MS 100 + +static int +axiom_i2c_read(struct i2c_client *client, u8 usage, u8 page, u8 *buf, u16 len) +{ + struct axiom_cmd_header cmd_header; + struct axiom_data *ts = i2c_get_clientdata(client); + struct i2c_msg msg[2]; + int ret; + + /* Build the header */ + cmd_header.target_address = usage_to_target_address(ts, usage, page, 0); + cmd_header.length = len; + cmd_header.read = 1; + + msg[0].addr = client->addr; + msg[0].flags = 0; + msg[0].len = sizeof(cmd_header); + msg[0].buf = (u8 *)&cmd_header; + + msg[1].addr = client->addr; + msg[1].flags = I2C_M_RD; + msg[1].len = len; + msg[1].buf = (char *)buf; + + ret = i2c_transfer(client->adapter, msg, 2); + if (ret != ARRAY_SIZE(msg)) { + dev_err(&client->dev, + "Failed reading usage %#x page %#x, error=%d\n", usage, + page, ret); + return -EIO; + } + + return 0; +} + +static int +axiom_i2c_write(struct i2c_client *client, u8 usage, u8 page, u8 *buf, u16 len) +{ + struct axiom_cmd_header cmd_header; + struct axiom_data *ts = i2c_get_clientdata(client); + struct i2c_msg msg[2]; + int ret; + + cmd_header.target_address = usage_to_target_address(ts, usage, page, 0); + cmd_header.length = len; + cmd_header.read = 0; + + msg[0].addr = client->addr; + msg[0].flags = 0; + msg[0].len = sizeof(cmd_header); + msg[0].buf = (u8 *)&cmd_header; + + msg[1].addr = client->addr; + msg[1].flags = 0; + msg[1].len = len; + msg[1].buf = (char *)buf; + + ret = i2c_transfer(client->adapter, msg, 2); + if (ret != 2) { + dev_err(&client->dev, + "Failed to write usage %#x page %#x, error=%d\n", usage, + page, ret); + return ret; + } + + return 0; +} + +static void axiom_i2c_poll(struct input_dev *input_dev) +{ + struct axiom_data *ts = input_get_drvdata(input_dev); + char *rx_data = ts->rx_buf; + + axiom_i2c_read(ts->client, REPORT_USAGE_ID, 0, rx_data, + ts->max_report_len); + axiom_process_report(ts, rx_data); +} + +/** + * Retrieve, store and print the axiom device information + */ +int axiom_discover(struct axiom_data *ts) +{ + char *rx_data = &ts->rx_buf[0]; + struct device *pdev = ts->pdev; + int ret; + + /* First the first page of u31 to get the device information and */ + /* the number of usages */ + ret = + axiom_i2c_read(ts->client, DEVINFO_USAGE_ID, 0, rx_data, + AX_U31_PAGE0_LENGTH); + if (ret) + return ret; + + axiom_get_dev_info(ts, rx_data); + + dev_dbg(pdev, "Data Decode:\n"); + dev_dbg(pdev, " Bootloader Mode: %u\n", ts->devinfo.bootloader_mode); + dev_dbg(pdev, " Device ID : %04x\n", ts->devinfo.device_id); + dev_dbg(pdev, " Firmware Rev : %02x.%02x\n", ts->devinfo.fw_major, + ts->devinfo.fw_minor); + dev_dbg(pdev, " Bootloader Rev : %02x.%02x\n", + ts->devinfo.bootloader_fw_ver_major, + ts->devinfo.bootloader_fw_ver_minor); + dev_dbg(pdev, " FW Extra Info : %04x\n", ts->devinfo.fw_info_extra); + dev_dbg(pdev, " Silicon : %02x\n", ts->devinfo.jedec_id); + dev_dbg(pdev, " Num Usages : %04x\n", ts->devinfo.num_usages); + + /* Read the second page of u31 to get the usage table */ + ret = axiom_i2c_read(ts->client, DEVINFO_USAGE_ID, 1, rx_data, + (U31_BYTES_PER_USAGE * ts->devinfo.num_usages)); + if (ret) + return ret; + + ts->max_report_len = axiom_populate_usage_table(ts, rx_data); + dev_dbg(pdev, "Max Report Length: %u\n", ts->max_report_len); + + return 0; +} +EXPORT_SYMBOL_GPL(axiom_discover); + +/** + * Rebaseline the touchscreen, effectively zero-ing it + */ +void axiom_rebaseline(struct axiom_data *ts) +{ + struct device *pdev = ts->pdev; + char buffer[8] = { 0 }; + int ret; + + memset(buffer, 0, sizeof(buffer)); + + buffer[0] = REBASELINE_CMD; + + ret = axiom_i2c_write(ts->client, 0x02, 0, buffer, sizeof(buffer)); + if (ret) + dev_err(pdev, "Rebaseline failed\n"); + + dev_info(pdev, "Capture Baseline Requested\n"); +} +EXPORT_SYMBOL_GPL(axiom_rebaseline); + +static irqreturn_t axiom_irq(int irq, void *handle) +{ + struct axiom_data *ts = handle; + u8 *rx_data = &ts->rx_buf[0]; + + axiom_i2c_read(ts->client, REPORT_USAGE_ID, 0, rx_data, ts->max_report_len); + axiom_process_report(ts, rx_data); + + return IRQ_HANDLED; +} + +static int axiom_i2c_probe(struct i2c_client *client) +{ + struct axiom_data *ts; + struct device *pdev = &client->dev; + struct input_dev *input_dev; + int error; + int target; + + ts = devm_kzalloc(pdev, sizeof(*ts), GFP_KERNEL); + if (!ts) + return -ENOMEM; + + ts->irq_gpio = devm_gpiod_get_optional(pdev, "irq", GPIOD_IN); + if (IS_ERR(ts->irq_gpio)) { + error = PTR_ERR(ts->irq_gpio); + dev_err(pdev, "failed to request irq GPIO: %d", error); + return error; + } + + ts->reset_gpio = devm_gpiod_get_optional(pdev, "reset", GPIOD_OUT_HIGH); + if (IS_ERR(ts->reset_gpio)) { + error = PTR_ERR(ts->reset_gpio); + dev_err(pdev, "failed to request reset GPIO: %d", error); + return error; + } + + if (ts->irq_gpio) { + error = + devm_request_threaded_irq(pdev, client->irq, NULL, + axiom_irq, + IRQF_TRIGGER_LOW | IRQF_ONESHOT, + "axiom_irq", ts); + if (error != 0) { + dev_err(pdev, "Failed to request IRQ %u (error: %d)\n", + client->irq, error); + return error; + } + } + + ts->client = client; + ts->pdev = pdev; + ts->usage_table_populated = false; + + i2c_set_clientdata(client, ts); + + axiom_discover(ts); + axiom_rebaseline(ts); + + input_dev = devm_input_allocate_device(ts->pdev); + if (!input_dev) { + dev_err(pdev, "Failed to allocate input device\n"); + return -ENOMEM; + } + + input_dev->name = "TouchNetix aXiom Touchscreen"; + input_dev->phys = "input/axiom_ts"; + + /* Single Touch */ + input_set_abs_params(input_dev, ABS_X, 0, 65535, 0, 0); + input_set_abs_params(input_dev, ABS_Y, 0, 65535, 0, 0); + + /* Multi Touch */ + /* Min, Max, Fuzz (expected noise in px, try 4?) and Flat */ + input_set_abs_params(input_dev, ABS_MT_POSITION_X, 0, 65535, 0, 0); + /* Min, Max, Fuzz (expected noise in px, try 4?) and Flat */ + input_set_abs_params(input_dev, ABS_MT_POSITION_Y, 0, 65535, 0, 0); + input_set_abs_params(input_dev, ABS_MT_TOOL_TYPE, 0, MT_TOOL_MAX, 0, 0); + input_set_abs_params(input_dev, ABS_MT_DISTANCE, 0, 127, 0, 0); + input_set_abs_params(input_dev, ABS_MT_PRESSURE, 0, 127, 0, 0); + + /* Registers the axiom device as a touch screen instead of as a mouse pointer */ + input_mt_init_slots(input_dev, U41_MAX_TARGETS, INPUT_MT_DIRECT); + + input_set_capability(input_dev, EV_KEY, BTN_LEFT); + + /* Enables the raw data for up to 4 force channels to be sent to the */ + /* input subsystem */ + set_bit(EV_REL, input_dev->evbit); + set_bit(EV_MSC, input_dev->evbit); + /* Declare that we support "RAW" Miscellaneous events */ + set_bit(MSC_RAW, input_dev->mscbit); + + if (!ts->irq_gpio) { + error = input_setup_polling(input_dev, axiom_i2c_poll); + if (error) { + dev_err(ts->pdev, "Unable to set up polling: %d\n", + error); + return error; + } + input_set_poll_interval(input_dev, POLL_INTERVAL_DEFAULT_MS); + } + + error = input_register_device(input_dev); + if (error != 0) { + dev_err(ts->pdev, + "Could not register with Input Sub-system., error=%d\n", + error); + return error; + } + + ts->input_dev = input_dev; + input_set_drvdata(ts->input_dev, ts); + + dev_info(pdev, "AXIOM: I2C driver registered with Input Sub-System.\n"); + + /* Delay just a smidge before enabling the IRQ */ + udelay(10); + + /* Ensure that all reports are initialised to not be present. */ + for (target = 0; target < U41_MAX_TARGETS; target++) + ts->targets[target].state = TARGET_STATE_NOT_PRESENT; + + return 0; +} + +static void axiom_i2c_remove(struct i2c_client *client) +{ + struct axiom_data *ts = i2c_get_clientdata(client); + + axiom_remove(ts); +} + +static const struct i2c_device_id axiom_i2c_id_table[] = { + {"ax54a"}, + {}, +}; + +MODULE_DEVICE_TABLE(i2c, axiom_i2c_id_table); + +static const struct of_device_id axiom_i2c_dt_ids[] = { + { + .compatible = "axiom,ax54a", + .data = "axiom", + }, + {} +}; + +MODULE_DEVICE_TABLE(of, axiom_i2c_dt_ids); + +static struct i2c_driver axiom_i2c_driver = { + .driver = { + .name = "axiom_i2c", + .of_match_table = of_match_ptr(axiom_i2c_dt_ids), + }, + .id_table = axiom_i2c_id_table, + .probe = axiom_i2c_probe, + .remove = axiom_i2c_remove, +}; + +module_i2c_driver(axiom_i2c_driver); + +MODULE_AUTHOR("Kamel Bouhara <kamel.bouhara@bootlin.com>"); +MODULE_DESCRIPTION("aXiom touchscreen I2C bus driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("axiom");
Add a new driver for the TouchNetix's aXiom family of multi-touch controller. This driver only support i2c and can be later adapted for SPI and USB support. Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com> --- .../devicetree/bindings/vendor-prefixes.yaml | 2 + MAINTAINERS | 7 + drivers/input/touchscreen/Kconfig | 11 + drivers/input/touchscreen/Makefile | 1 + drivers/input/touchscreen/axiom_core.c | 382 ++++++++++++++++++ drivers/input/touchscreen/axiom_core.h | 140 +++++++ drivers/input/touchscreen/axiom_i2c.c | 349 ++++++++++++++++ 7 files changed, 892 insertions(+) create mode 100644 drivers/input/touchscreen/axiom_core.c create mode 100644 drivers/input/touchscreen/axiom_core.h create mode 100644 drivers/input/touchscreen/axiom_i2c.c