diff mbox series

[v6,30/36] ARM: dts: qcom: msm8660: move RPM regulators to board files

Message ID 20230928110309.1212221-31-dmitry.baryshkov@linaro.org (mailing list archive)
State New
Headers show
Series ARM: dts: qcom: cleanup PMIC usage | expand

Commit Message

Dmitry Baryshkov Sept. 28, 2023, 11:03 a.m. UTC 
The set of regulators available over the RPM requests is not a property
of the SoC. Move them to board files.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 .../dts/qcom/qcom-apq8060-dragonboard.dts     | 141 ++++++++++++------
 arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts  |  10 ++
 arch/arm/boot/dts/qcom/qcom-msm8660.dtsi      |  66 --------
 3 files changed, 102 insertions(+), 115 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts
index 10b8f529c337..8b70d4a59c7b 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts
@@ -453,6 +453,8 @@  &rpm {
 	 * that means
 	 */
 	regulators-0 {
+		compatible = "qcom,rpm-pm8901-regulators";
+
 		vdd_l0-supply = <&pm8901_s4>;
 		vdd_l1-supply = <&vph>;
 		vdd_l2-supply = <&vph>;
@@ -470,57 +472,63 @@  regulators-0 {
 		lvs3_in-supply = <&pm8058_s2>;
 		mvs_in-supply = <&pm8058_s3>;
 
-		l0 {
+		pm8901_l0: l0 {
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			bias-pull-down;
 		};
-		l1 {
+
+		pm8901_l1: l1 {
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
 			bias-pull-down;
 		};
-		l2 {
+
+		pm8901_l2: l2 {
 			/* TMA340 requires strictly 3.3V */
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
 			bias-pull-down;
 		};
-		l3 {
+
+		pm8901_l3: l3 {
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
 			bias-pull-down;
 		};
-		l4 {
+
+		pm8901_l4: l4 {
 			regulator-min-microvolt = <2600000>;
 			regulator-max-microvolt = <2600000>;
 			bias-pull-down;
 		};
-		l5 {
+
+		pm8901_l5: l5 {
 			regulator-min-microvolt = <2850000>;
 			regulator-max-microvolt = <2850000>;
 			bias-pull-down;
 		};
-		l6 {
+
+		pm8901_l6: l6 {
 			regulator-min-microvolt = <2200000>;
 			regulator-max-microvolt = <2200000>;
 			bias-pull-down;
 		};
 
 		/* s0 and s1 are SAW regulators controlled over SPM */
-		s2 {
+		pm8901_s2: s2 {
 			regulator-min-microvolt = <1300000>;
 			regulator-max-microvolt = <1300000>;
 			qcom,switch-mode-frequency = <1600000>;
 			bias-pull-down;
 		};
-		s3 {
+		pm8901_s3: s3 {
 			regulator-min-microvolt = <1100000>;
 			regulator-max-microvolt = <1100000>;
 			qcom,switch-mode-frequency = <1600000>;
 			bias-pull-down;
 		};
-		s4 {
+		pm8901_s4: s4 {
 			regulator-min-microvolt = <1225000>;
 			regulator-max-microvolt = <1225000>;
 			qcom,switch-mode-frequency = <1600000>;
@@ -528,17 +536,22 @@  s4 {
 		};
 
 		/* LVS0 thru 3 and mvs are just switches */
-		lvs0 {
+		pm8901_lvs0: lvs0 {
 			regulator-always-on;
 		};
-		lvs1 { };
-		lvs2 { };
-		lvs3 { };
-		mvs { };
 
+		pm8901_lvs1: lvs1 { };
+
+		pm8901_lvs2: lvs2 { };
+
+		pm8901_lvs3: lvs3 { };
+
+		pm8901_mvs: mvs { };
 	};
 
 	regulators-1 {
+		compatible = "qcom,rpm-pm8058-regulators";
+
 		vdd_l0_l1_lvs-supply = <&pm8058_s3>;
 		vdd_l2_l11_l12-supply = <&vph>;
 		vdd_l3_l4_l5-supply = <&vph>;
@@ -560,144 +573,169 @@  regulators-1 {
 		vdd_s4-supply = <&vph>;
 		vdd_ncp-supply = <&vph>;
 
-		l0 {
+		pm8058_l0: l0 {
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			bias-pull-down;
 		};
-		l1 {
+
+		pm8058_l1: l1 {
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			bias-pull-down;
 		};
-		l2 {
+
+		pm8058_l2: l2 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <2600000>;
 			bias-pull-down;
 		};
-		l3 {
+
+		pm8058_l3: l3 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			bias-pull-down;
 		};
-		l4 {
+
+		pm8058_l4: l4 {
 			regulator-min-microvolt = <2850000>;
 			regulator-max-microvolt = <2850000>;
 			bias-pull-down;
 		};
-		l5 {
+
+		pm8058_l5: l5 {
 			regulator-min-microvolt = <2850000>;
 			regulator-max-microvolt = <2850000>;
 			bias-pull-down;
 		};
-		l6 {
+
+		pm8058_l6: l6 {
 			regulator-min-microvolt = <3000000>;
 			regulator-max-microvolt = <3600000>;
 			bias-pull-down;
 		};
-		l7 {
+
+		pm8058_l7: l7 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			bias-pull-down;
 		};
-		l8 {
+
+		pm8058_l8: l8 {
 			regulator-min-microvolt = <2900000>;
 			regulator-max-microvolt = <3050000>;
 			bias-pull-down;
 		};
-		l9 {
+
+		pm8058_l9: l9 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			bias-pull-down;
 		};
-		l10 {
+
+		pm8058_l10: l10 {
 			regulator-min-microvolt = <2600000>;
 			regulator-max-microvolt = <2600000>;
 			bias-pull-down;
 		};
-		l11 {
+
+		pm8058_l11: l11 {
 			regulator-min-microvolt = <1500000>;
 			regulator-max-microvolt = <1500000>;
 			bias-pull-down;
 		};
-		l12 {
+
+		pm8058_l12: l12 {
 			regulator-min-microvolt = <2900000>;
 			regulator-max-microvolt = <2900000>;
 			bias-pull-down;
 		};
-		l13 {
+
+		pm8058_l13: l13 {
 			regulator-min-microvolt = <2050000>;
 			regulator-max-microvolt = <2050000>;
 			bias-pull-down;
 		};
-		l14 {
+
+		pm8058_l14: l14 {
 			regulator-min-microvolt = <2850000>;
 			regulator-max-microvolt = <2850000>;
 		};
-		l15 {
+
+		pm8058_l15: l15 {
 			regulator-min-microvolt = <2850000>;
 			regulator-max-microvolt = <2850000>;
 			bias-pull-down;
 		};
-		l16 {
+
+		pm8058_l16: l16 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			bias-pull-down;
 			regulator-always-on;
 		};
-		l17 {
+
+		pm8058_l17: l17 {
 			// 1.5V according to schematic
 			regulator-min-microvolt = <2600000>;
 			regulator-max-microvolt = <2600000>;
 			bias-pull-down;
 		};
-		l18 {
+
+		pm8058_l18: l18 {
 			regulator-min-microvolt = <2200000>;
 			regulator-max-microvolt = <2200000>;
 			bias-pull-down;
 		};
-		l19 {
+
+		pm8058_l19: l19 {
 			regulator-min-microvolt = <2500000>;
 			regulator-max-microvolt = <2500000>;
 			bias-pull-down;
 		};
-		l20 {
+
+		pm8058_l20: l20 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			bias-pull-down;
 		};
-		l21 {
+
+		pm8058_l21: l21 {
 			// 1.1 V according to schematic
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			bias-pull-down;
 			regulator-always-on;
 		};
-		l22 {
+
+		pm8058_l22: l22 {
 			// 1.2 V according to schematic
 			regulator-min-microvolt = <1150000>;
 			regulator-max-microvolt = <1150000>;
 			bias-pull-down;
 		};
-		l23 {
+
+		pm8058_l23: l23 {
 			// Unused
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			bias-pull-down;
 		};
-		l24 {
+
+		pm8058_l24: l24 {
 			// Unused
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			bias-pull-down;
 		};
-		l25 {
+
+		pm8058_l25: l25 {
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			bias-pull-down;
 		};
 
-		s0 {
+		pm8058_s0: s0 {
 			// regulator-min-microvolt = <500000>;
 			// regulator-max-microvolt = <1325000>;
 			regulator-min-microvolt = <1100000>;
@@ -705,7 +743,8 @@  s0 {
 			qcom,switch-mode-frequency = <1600000>;
 			bias-pull-down;
 		};
-		s1 {
+
+		pm8058_s1: s1 {
 			// regulator-min-microvolt = <500000>;
 			// regulator-max-microvolt = <1250000>;
 			regulator-min-microvolt = <1100000>;
@@ -713,21 +752,24 @@  s1 {
 			qcom,switch-mode-frequency = <1600000>;
 			bias-pull-down;
 		};
-		s2 {
+
+		pm8058_s2: s2 {
 			// 1.3 V according to schematic
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1400000>;
 			qcom,switch-mode-frequency = <1600000>;
 			bias-pull-down;
 		};
-		s3 {
+
+		pm8058_s3: s3 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			qcom,switch-mode-frequency = <1600000>;
 			regulator-always-on;
 			bias-pull-down;
 		};
-		s4 {
+
+		pm8058_s4: s4 {
 			regulator-min-microvolt = <2200000>;
 			regulator-max-microvolt = <2200000>;
 			qcom,switch-mode-frequency = <1600000>;
@@ -736,14 +778,15 @@  s4 {
 		};
 
 		/* LVS0 and LVS1 are just switches */
-		lvs0 {
+		pm8058_lvs0: lvs0 {
 			bias-pull-down;
 		};
-		lvs1 {
+
+		pm8058_lvs1: lvs1 {
 			bias-pull-down;
 		};
 
-		ncp {
+		pm8058_ncp: ncp {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			qcom,switch-mode-frequency = <1600000>;
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts
index be2fbc1e0950..69fe651f564d 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts
@@ -65,6 +65,16 @@  MATRIX_KEY(5, 4, KEY_MENU)
 	keypad,num-columns = <5>;
 };
 
+&rpm {
+	regulators-0 {
+		compatible = "qcom,rpm-pm8901-regulators";
+	};
+
+	regulators-1 {
+		compatible = "qcom,rpm-pm8058-regulators";
+	};
+};
+
 /* eMMC */
 &sdcc1 {
 	vmmc-supply = <&vsdcc_fixed>;
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi
index eef4712bbcc4..a7c245b9c8f9 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi
@@ -347,72 +347,6 @@  rpmcc: clock-controller {
 				clocks = <&pxo_board>;
 				clock-names = "pxo";
 			};
-
-			regulators-0 {
-				compatible = "qcom,rpm-pm8901-regulators";
-
-				pm8901_l0: l0 {};
-				pm8901_l1: l1 {};
-				pm8901_l2: l2 {};
-				pm8901_l3: l3 {};
-				pm8901_l4: l4 {};
-				pm8901_l5: l5 {};
-				pm8901_l6: l6 {};
-
-				/* S0 and S1 Handled as SAW regulators by SPM */
-				pm8901_s2: s2 {};
-				pm8901_s3: s3 {};
-				pm8901_s4: s4 {};
-
-				pm8901_lvs0: lvs0 {};
-				pm8901_lvs1: lvs1 {};
-				pm8901_lvs2: lvs2 {};
-				pm8901_lvs3: lvs3 {};
-
-				pm8901_mvs: mvs {};
-			};
-
-			regulators-1 {
-				compatible = "qcom,rpm-pm8058-regulators";
-
-				pm8058_l0: l0 {};
-				pm8058_l1: l1 {};
-				pm8058_l2: l2 {};
-				pm8058_l3: l3 {};
-				pm8058_l4: l4 {};
-				pm8058_l5: l5 {};
-				pm8058_l6: l6 {};
-				pm8058_l7: l7 {};
-				pm8058_l8: l8 {};
-				pm8058_l9: l9 {};
-				pm8058_l10: l10 {};
-				pm8058_l11: l11 {};
-				pm8058_l12: l12 {};
-				pm8058_l13: l13 {};
-				pm8058_l14: l14 {};
-				pm8058_l15: l15 {};
-				pm8058_l16: l16 {};
-				pm8058_l17: l17 {};
-				pm8058_l18: l18 {};
-				pm8058_l19: l19 {};
-				pm8058_l20: l20 {};
-				pm8058_l21: l21 {};
-				pm8058_l22: l22 {};
-				pm8058_l23: l23 {};
-				pm8058_l24: l24 {};
-				pm8058_l25: l25 {};
-
-				pm8058_s0: s0 {};
-				pm8058_s1: s1 {};
-				pm8058_s2: s2 {};
-				pm8058_s3: s3 {};
-				pm8058_s4: s4 {};
-
-				pm8058_lvs0: lvs0 {};
-				pm8058_lvs1: lvs1 {};
-
-				pm8058_ncp: ncp {};
-			};
 		};
 
 		amba {