| Message ID | 20240219101221.129750-4-kamel.bouhara@bootlin.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Input: Add TouchNetix axiom touchscreen driver | expand |
Hello Kamel, Thanks for v8. On 19.02.24 11:12, Kamel Bouhara wrote: > Add a new driver for the TouchNetix's axiom family of > touchscreen controllers. This driver only supports i2c > and can be later adapted for SPI and USB support. > > Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com> > --- > MAINTAINERS | 1 + > drivers/input/touchscreen/Kconfig | 12 + > drivers/input/touchscreen/Makefile | 1 + > drivers/input/touchscreen/touchnetix_axiom.c | 669 +++++++++++++++++++ > 4 files changed, 683 insertions(+) > create mode 100644 drivers/input/touchscreen/touchnetix_axiom.c > > diff --git a/MAINTAINERS b/MAINTAINERS > index 4b3ed2f22b89..de5fad8f317a 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -22262,6 +22262,7 @@ M: Kamel Bouhara <kamel.bouhara@bootlin.com> > L: linux-input@vger.kernel.org > S: Maintained > F: Documentation/devicetree/bindings/input/touchscreen/touchnetix,ax54a.yaml > +F: drivers/input/touchscreen/touchnetix_axiom.c > > TPM DEVICE DRIVER > M: Peter Huewe <peterhuewe@gmx.de> > diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig > index e3e2324547b9..f36bee8d8696 100644 > --- a/drivers/input/touchscreen/Kconfig > +++ b/drivers/input/touchscreen/Kconfig > @@ -803,6 +803,18 @@ config TOUCHSCREEN_MIGOR > To compile this driver as a module, choose M here: the > module will be called migor_ts. > > +config TOUCHSCREEN_TOUCHNETIX_AXIOM > + tristate "TouchNetix AXIOM based touchscreen controllers" > + depends on I2C > + help > + Say Y here if you have a axiom touchscreen connected to > + your system. > + > + If unsure, say N. > + > + To compile this driver as a module, choose M here: the > + module will be called axiom. > + > config TOUCHSCREEN_TOUCHRIGHT > tristate "Touchright serial touchscreen" > select SERIO > diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile > index 62bd24f3ac8e..8e32a2df5e18 100644 > --- a/drivers/input/touchscreen/Makefile > +++ b/drivers/input/touchscreen/Makefile > @@ -88,6 +88,7 @@ obj-$(CONFIG_TOUCHSCREEN_SUR40) += sur40.o > obj-$(CONFIG_TOUCHSCREEN_SURFACE3_SPI) += surface3_spi.o > obj-$(CONFIG_TOUCHSCREEN_TI_AM335X_TSC) += ti_am335x_tsc.o > obj-$(CONFIG_TOUCHSCREEN_TOUCHIT213) += touchit213.o > +obj-$(CONFIG_TOUCHSCREEN_TOUCHNETIX_AXIOM) += touchnetix_axiom.o > obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT) += touchright.o > obj-$(CONFIG_TOUCHSCREEN_TOUCHWIN) += touchwin.o > obj-$(CONFIG_TOUCHSCREEN_TS4800) += ts4800-ts.o > diff --git a/drivers/input/touchscreen/touchnetix_axiom.c b/drivers/input/touchscreen/touchnetix_axiom.c > new file mode 100644 > index 000000000000..f7d1b23a4baf > --- /dev/null > +++ b/drivers/input/touchscreen/touchnetix_axiom.c > @@ -0,0 +1,669 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * TouchNetix axiom Touchscreen Driver > + * > + * Copyright (C) 2020-2023 TouchNetix Ltd. > + * > + * Author(s): Bart Prescott <bartp@baasheep.co.uk> > + * Pedro Torruella <pedro.torruella@touchnetix.com> > + * Mark Satterthwaite <mark.satterthwaite@touchnetix.com> > + * Hannah Rossiter <hannah.rossiter@touchnetix.com> > + * Kamel Bouhara <kamel.bouhara@bootlin.com> > + * > + */ > +#include <linux/bitfield.h> > +#include <linux/crc16.h> > +#include <linux/delay.h> > +#include <linux/device.h> > +#include <linux/gpio/consumer.h> > +#include <linux/i2c.h> > +#include <linux/input.h> > +#include <linux/input/mt.h> > +#include <linux/input/touchscreen.h> > +#include <linux/interrupt.h> > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/mod_devicetable.h> > +#include <linux/regmap.h> > + > +#include <asm/unaligned.h> > +#define AXIOM_PROX_LEVEL -128 > +#define AXIOM_DMA_OPS_DELAY_USEC 250 > +#define AXIOM_STARTUP_TIME_MS 110 > +/* > + * Register group u31 has 2 pages for usage table entries. > + */ > +#define AXIOM_U31_MAX_USAGES 0xff > +#define AXIOM_U31_BYTES_PER_USAGE 6 > +#define AXIOM_U31_PAGE0_LENGTH 0x0C > +#define AXIOM_U31_BOOTMODE_MASK BIT(7) > +#define AXIOM_U31_DEVID_MASK GENMASK(14, 0) > + > +#define AXIOM_MAX_REPORT_LEN 0x7f > + > +#define AXIOM_CMD_HEADER_READ_MASK BIT(15) > +#define AXIOM_U41_MAX_TARGETS 10 > + > +#define AXIOM_U46_AUX_CHANNELS 4 > +#define AXIOM_U46_AUX_MASK GENMASK(11, 0) > + > +#define AXIOM_COMMS_MAX_USAGE_PAGES 3 > +#define AXIOM_COMMS_PAGE_SIZE 256 > +#define AXIOM_COMMS_REPORT_LEN_MASK GENMASK(6, 0) > + > +#define AXIOM_REPORT_USAGE_ID 0x34 > +#define AXIOM_DEVINFO_USAGE_ID 0x31 > +#define AXIOM_USAGE_2HB_REPORT_ID 0x01 > +#define AXIOM_USAGE_2AUX_REPORT_ID 0x46 > +#define AXIOM_USAGE_2DCTS_REPORT_ID 0x41 > + > +#define AXIOM_PAGE_OFFSET_MASK GENMASK(6, 0) > + > +struct axiom_devinfo { > + __le16 device_id; > + u8 fw_minor; > + u8 fw_major; > + u8 fw_info_extra; > + u8 tcp_revision; > + u8 bootloader_fw_minor; > + u8 bootloader_fw_major; > + __le16 jedec_id; > + u8 num_usages; > +} __packed; > + > +/* > + * Describes parameters of a specific usage, essentially a single element of > + * the "Usage Table" > + */ > +struct axiom_usage_entry { > + u8 id; > + u8 is_report; > + u8 start_page; > + u8 num_pages; > +}; > + > +/* > + * Represents state of a touch or target when detected prior to a touch (eg. > + * hover or proximity events). > + */ > +enum axiom_target_state { > + AXIOM_TARGET_STATE_NOT_PRESENT = 0, > + AXIOM_TARGET_STATE_PROX = 1, > + AXIOM_TARGET_STATE_HOVER = 2, > + AXIOM_TARGET_STATE_TOUCHING = 3, > +}; > + > +struct axiom_u41_target { > + enum axiom_target_state state; > + u16 x; > + u16 y; > + s8 z; > + bool insert; > + bool touch; > +}; > + > +struct axiom_target_report { > + u8 index; > + u8 present; > + u16 x; > + u16 y; > + s8 z; > +}; > + > +struct axiom_cmd_header { > + __le16 target_address; > + __le16 length; > +} __packed; > + > +struct axiom_data { > + struct axiom_devinfo devinfo; > + struct device *dev; > + struct gpio_desc *reset_gpio; > + struct i2c_client *client; > + struct input_dev *input_dev; > + u32 max_report_len; > + u8 rx_buf[AXIOM_COMMS_MAX_USAGE_PAGES * AXIOM_COMMS_PAGE_SIZE]; > + struct axiom_u41_target targets[AXIOM_U41_MAX_TARGETS]; > + struct axiom_usage_entry usage_table[AXIOM_U31_MAX_USAGES]; > + bool usage_table_populated; > + struct regulator *vdda; > + struct regulator *vddi; > + struct regmap *regmap; > + struct touchscreen_properties prop; > +}; > + > +static const struct regmap_config axiom_i2c_regmap_config = { > + .reg_bits = 32, > + .reg_format_endian = REGMAP_ENDIAN_LITTLE, > + .val_bits = 8, > + .val_format_endian = REGMAP_ENDIAN_LITTLE, > +}; > + > +/* > + * axiom devices are typically configured to report touches at a rate > + * of 100Hz (10ms) for systems that require polling for reports. > + * When reports are polled, it will be expected to occasionally > + * observe the overflow bit being set in the reports. > + * This indicates that reports are not being read fast enough. > + */ > +#define POLL_INTERVAL_DEFAULT_MS 10 > + > +/* Translate usage/page/offset triplet into physical address. */ > +static u16 axiom_usage_to_target_address(struct axiom_data *ts, u8 usage, u8 page, > + char offset) > +{ > + /* At the moment the convention is that u31 is always at physical address 0x0 */ > + if (!ts->usage_table_populated) { > + if (usage == AXIOM_DEVINFO_USAGE_ID) > + return ((page << 8) + offset); > + else > + return 0xffff; > + } > + > + if (page >= ts->usage_table[usage].num_pages) { > + dev_err(ts->dev, "Invalid usage table! usage: u%02x, page: %02x, offset: %02x\n", > + usage, page, offset); > + return 0xffff; > + } > + > + return ((ts->usage_table[usage].start_page + page) << 8) + offset; > +} > + > +static int axiom_read(struct axiom_data *ts, u8 usage, u8 page, void *buf, u16 len) > +{ > + struct axiom_cmd_header cmd_header; > + u32 preamble; > + int ret; > + > + cmd_header.target_address = cpu_to_le16(axiom_usage_to_target_address(ts, usage, page, 0)); > + cmd_header.length = cpu_to_le16(len | AXIOM_CMD_HEADER_READ_MASK); > + > + preamble = get_unaligned_le32(&cmd_header); > + > + ret = regmap_write(ts->regmap, preamble, 0); > + if (ret) { > + dev_err(ts->dev, "failed to write preamble, error %d\n", ret); > + return ret; > + } > + > + ret = regmap_raw_read(ts->regmap, 0, buf, len); > + if (ret) { > + dev_err(ts->dev, "failed to read target address %04x, error %d\n", > + cmd_header.target_address, ret); > + return ret; > + } > + > + /* Wait device's DMA operations */ > + usleep_range(AXIOM_DMA_OPS_DELAY_USEC, AXIOM_DMA_OPS_DELAY_USEC + 50); > + > + return 0; > +} > + > +/* > + * One of the main purposes for reading the usage table is to identify > + * which usages reside at which target address. > + * When performing subsequent reads or writes to AXIOM, the target address > + * is used to specify which usage is being accessed. > + * Consider the following discovery code which will build up the usage table. > + */ > +static u32 axiom_populate_usage_table(struct axiom_data *ts) > +{ > + struct axiom_usage_entry *usage_table; > + u8 *rx_data = ts->rx_buf; > + u32 max_report_len = 0; > + u32 usage_id; > + int error; > + > + usage_table = ts->usage_table; > + > + /* Read the second page of usage u31 to get the usage table */ > + error = axiom_read(ts, AXIOM_DEVINFO_USAGE_ID, 1, rx_data, > + (AXIOM_U31_BYTES_PER_USAGE * ts->devinfo.num_usages)); > + > + if (error) > + return error; > + > + for (usage_id = 0; usage_id < ts->devinfo.num_usages; usage_id++) { > + u16 offset = (usage_id * AXIOM_U31_BYTES_PER_USAGE); > + u8 id = rx_data[offset + 0]; > + u8 start_page = rx_data[offset + 1]; > + u8 num_pages = rx_data[offset + 2]; > + u32 max_offset = ((rx_data[offset + 3] & AXIOM_PAGE_OFFSET_MASK) + 1) * 2; > + > + usage_table[id].is_report = !num_pages; > + > + /* Store the entry into the usage table */ > + usage_table[id].id = id; > + usage_table[id].start_page = start_page; > + usage_table[id].num_pages = num_pages; > + > + dev_dbg(ts->dev, "Usage u%02x Info: %*ph\n", id, AXIOM_U31_BYTES_PER_USAGE, > + &rx_data[offset]); > + > + /* Identify the max report length the module will receive */ > + if (usage_table[id].is_report && max_offset > max_report_len) > + max_report_len = max_offset; > + } > + > + ts->usage_table_populated = true; > + > + return max_report_len; > +} > + > +static int axiom_discover(struct axiom_data *ts) > +{ > + int error; > + > + /* > + * Fetch the first page of usage u31 to get the > + * device information and the number of usages > + */ > + error = axiom_read(ts, AXIOM_DEVINFO_USAGE_ID, 0, &ts->devinfo, AXIOM_U31_PAGE0_LENGTH); > + if (error) > + return error; > + > + dev_dbg(ts->dev, " Boot Mode : %s\n", > + FIELD_GET(AXIOM_U31_BOOTMODE_MASK, > + le16_to_cpu(ts->devinfo.device_id)) ? "BLP" : "TCP"); > + dev_dbg(ts->dev, " Device ID : %04lx\n", > + FIELD_GET(AXIOM_U31_DEVID_MASK, le16_to_cpu(ts->devinfo.device_id))); > + dev_dbg(ts->dev, " Firmware Rev : %02x.%02x\n", ts->devinfo.fw_major, > + ts->devinfo.fw_minor); > + dev_dbg(ts->dev, " Bootloader Rev : %02x.%02x\n", ts->devinfo.bootloader_fw_major, > + ts->devinfo.bootloader_fw_minor); > + dev_dbg(ts->dev, " FW Extra Info : %04x\n", ts->devinfo.fw_info_extra); > + dev_dbg(ts->dev, " Silicon : %04x\n", le16_to_cpu(ts->devinfo.jedec_id)); > + dev_dbg(ts->dev, " Number usages : %04x\n", ts->devinfo.num_usages); > + > + ts->max_report_len = axiom_populate_usage_table(ts); > + if (!ts->max_report_len || !ts->devinfo.num_usages || > + ts->max_report_len > AXIOM_MAX_REPORT_LEN) { > + dev_err(ts->dev, "Invalid report length or usages number"); > + return -EINVAL; > + } > + > + dev_dbg(ts->dev, "Max Report Length: %u\n", ts->max_report_len); > + > + return 0; > +} > + > +/* > + * Support function to axiom_process_u41_report. > + * Generates input-subsystem events for every target. > + * After calling this function the caller shall issue > + * a Sync to the input sub-system. > + */ > +static bool axiom_process_u41_report_target(struct axiom_data *ts, > + struct axiom_target_report *target) > +{ > + struct input_dev *input_dev = ts->input_dev; > + struct axiom_u41_target *target_prev_state; > + enum axiom_target_state current_state; > + int id; > + > + /* Verify the target index */ > + if (target->index >= AXIOM_U41_MAX_TARGETS) { > + dev_err(ts->dev, "Invalid target index! %u\n", target->index); > + return false; > + } > + > + target_prev_state = &ts->targets[target->index]; > + > + current_state = AXIOM_TARGET_STATE_NOT_PRESENT; > + > + if (target->present) { > + if (target->z >= 0) > + current_state = AXIOM_TARGET_STATE_TOUCHING; > + else if (target->z > AXIOM_PROX_LEVEL && target->z < 0) > + current_state = AXIOM_TARGET_STATE_HOVER; > + else if (target->z == AXIOM_PROX_LEVEL) > + current_state = AXIOM_TARGET_STATE_PROX; > + } > + > + if (target_prev_state->state == current_state && > + target_prev_state->x == target->x && > + target_prev_state->y == target->y && > + target_prev_state->z == target->z) > + return false; > + > + id = target->index; > + > + dev_dbg(ts->dev, "U41 Target T%u, slot:%u present:%u, x:%u, y:%u, z:%d\n", > + target->index, slot, target->present, > + target->x, target->y, target->z); This doesn't compile. You forgot to replace slot with id. - dev_dbg(ts->dev, "U41 Target T%u, slot:%u present:%u, x:%u, y:%u, z:%d\n", - target->index, slot, target->present, + dev_dbg(ts->dev, "U41 Target T%u, id:%u present:%u, x:%u, y:%u, z:%d\n", + target->index, id, target->present, > + switch (current_state) { > + case AXIOM_TARGET_STATE_NOT_PRESENT: > + case AXIOM_TARGET_STATE_PROX: > + if (!target_prev_state->insert) > + break; > + target_prev_state->insert = false; > + > + if (!id) > + input_report_key(input_dev, BTN_TOUCH, 0); > + > + input_mt_report_slot_inactive(input_dev); > + /* > + * make sure the previous coordinates are > + * all off screen when the finger comes back > + */ > + target->x = 65535; > + target->y = 65535; > + target->z = AXIOM_PROX_LEVEL; > + break; > + case AXIOM_TARGET_STATE_HOVER: > + case AXIOM_TARGET_STATE_TOUCHING: > + target_prev_state->insert = true; > + input_report_abs(input_dev, ABS_MT_TRACKING_ID, id); > + input_report_abs(input_dev, ABS_MT_POSITION_X, target->x); > + input_report_abs(input_dev, ABS_MT_POSITION_Y, target->y); > + > + if (current_state == AXIOM_TARGET_STATE_TOUCHING) { > + input_report_abs(input_dev, ABS_MT_DISTANCE, 0); > + input_report_abs(input_dev, ABS_DISTANCE, 0); > + input_report_abs(input_dev, ABS_MT_PRESSURE, target->z); > + input_report_abs(input_dev, ABS_PRESSURE, target->z); > + } else { > + input_report_abs(input_dev, ABS_MT_DISTANCE, -target->z); > + input_report_abs(input_dev, ABS_DISTANCE, -target->z); > + input_report_abs(input_dev, ABS_MT_PRESSURE, 0); > + input_report_abs(input_dev, ABS_PRESSURE, 0); > + } > + > + if (!id) > + input_report_key(input_dev, BTN_TOUCH, (current_state == > + AXIOM_TARGET_STATE_TOUCHING)); > + break; > + default: > + break; > + } > + > + target_prev_state->state = current_state; > + target_prev_state->x = target->x; > + target_prev_state->y = target->y; > + target_prev_state->z = target->z; > + > + return true; > +} > + > +/* > + * U41 is the output report of the 2D CTS and contains the status of targets > + * (including contacts and pre-contacts) along with their X,Y,Z values. > + * When a target has been removed (no longer detected), > + * the corresponding X,Y,Z values will be zeroed. > + */ > +static bool axiom_process_u41_report(struct axiom_data *ts, u8 *rx_buf) > +{ > + struct axiom_target_report target; > + bool update_done = false; > + u16 target_status; > + int i; > + > + target_status = get_unaligned_le16(rx_buf + 1); > + > + for (i = 0; i < AXIOM_U41_MAX_TARGETS; i++) { > + u8 *target_step = &rx_buf[i * 4]; > + > + target.index = i; > + input_mt_slot(ts->input_dev, i); > + input_mt_report_slot_state(ts->input_dev, MT_TOOL_FINGER, true); > + target.present = ((target_status & (1 << i)) != 0) ? 1 : 0; > + target.x = get_unaligned_le16(target_step + 3); > + target.y = get_unaligned_le16(target_step + 5); > + target.z = (s8)(rx_buf[i + 43]); > + touchscreen_report_pos(ts->input_dev, &ts->prop, target.x, target.y, true); > + update_done |= axiom_process_u41_report_target(ts, &target); > + } > + > + return update_done; > +} > + > +/* > + * U46 report contains a low level measurement data generated by the capacitive > + * displacement sensor (CDS) algorithms from the auxiliary channels. > + * This information is useful when tuning multi-press to assess mechanical > + * consistency in the unit's construction. > + */ > +static void axiom_process_u46_report(struct axiom_data *ts, u8 *rx_buf) > +{ > + struct input_dev *input_dev = ts->input_dev; > + u32 event_value; > + u16 aux_value; > + int i; > + > + for (i = 0; i < AXIOM_U46_AUX_CHANNELS; i++) { > + u8 *target_step = &rx_buf[i * 2]; > + > + input_mt_slot(input_dev, i); > + input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, true); > + aux_value = get_unaligned_le16(target_step + 1) & AXIOM_U46_AUX_MASK; > + event_value = (i << 16) | (aux_value); > + input_event(input_dev, EV_MSC, MSC_RAW, event_value); > + } > +} > + > +/* > + * Validates the crc and demultiplexes the axiom reports to the appropriate > + * report handler > + */ > +static int axiom_handle_events(struct axiom_data *ts) > +{ > + struct input_dev *input_dev = ts->input_dev; > + u8 *report_data = ts->rx_buf; > + struct device *dev = ts->dev; > + u16 crc_report; > + u8 *crc_bytes; > + u16 crc_calc; > + int error; > + u8 len; > + > + error = axiom_read(ts, AXIOM_REPORT_USAGE_ID, 0, report_data, ts->max_report_len); > + if (error) > + return error; > + > + len = (report_data[0] & AXIOM_COMMS_REPORT_LEN_MASK) << 1; > + if (len <= 2) { > + dev_err(dev, "Zero length report discarded.\n"); > + return -ENODATA; > + } > + > + /* Validate the report CRC */ > + crc_bytes = &report_data[len]; > + > + crc_report = get_unaligned_le16(crc_bytes - 2); > + /* Length is in 16 bit words and remove the size of the CRC16 itself */ > + crc_calc = crc16(0, report_data, (len - 2)); > + > + if (crc_calc != crc_report) { > + dev_err(dev, > + "CRC mismatch! Expected: %#x, Calculated CRC: %#x.\n", > + crc_report, crc_calc); > + return -EINVAL; > + } > + > + switch (report_data[1]) { > + case AXIOM_USAGE_2DCTS_REPORT_ID: > + if (axiom_process_u41_report(ts, &report_data[1])) { > + input_mt_sync_frame(input_dev); > + input_sync(input_dev); > + } > + break; > + > + case AXIOM_USAGE_2AUX_REPORT_ID: > + /* This is an aux report (force) */ > + axiom_process_u46_report(ts, &report_data[1]); > + input_mt_sync(input_dev); > + input_sync(input_dev); > + break; > + > + case AXIOM_USAGE_2HB_REPORT_ID: > + /* This is a heartbeat report */ > + break; > + default: > + return -EINVAL; > + } > + > + return 0; > +} > + > +static void axiom_i2c_poll(struct input_dev *input_dev) > +{ > + struct axiom_data *ts = input_get_drvdata(input_dev); > + > + axiom_handle_events(ts); > +} > + > +static irqreturn_t axiom_irq(int irq, void *dev_id) > +{ > + struct axiom_data *ts = dev_id; > + > + axiom_handle_events(ts); > + > + return IRQ_HANDLED; > +} > + > +static void axiom_reset(struct gpio_desc *reset_gpio) > +{ > + gpiod_set_value_cansleep(reset_gpio, 1); > + usleep_range(1000, 2000); > + gpiod_set_value_cansleep(reset_gpio, 0); > + msleep(AXIOM_STARTUP_TIME_MS); > +} > + > +static int axiom_i2c_probe(struct i2c_client *client) > +{ > + struct device *dev = &client->dev; > + struct input_dev *input_dev; > + struct axiom_data *ts; > + u32 poll_interval; > + int target; > + int error; > + > + ts = devm_kzalloc(dev, sizeof(*ts), GFP_KERNEL); > + if (!ts) > + return -ENOMEM; > + > + i2c_set_clientdata(client, ts); > + ts->client = client; > + ts->dev = dev; > + > + ts->regmap = devm_regmap_init_i2c(client, &axiom_i2c_regmap_config); > + error = PTR_ERR_OR_ZERO(ts->regmap); > + if (error) { > + dev_err(dev, "Failed to initialize regmap: %d\n", error); > + return error; > + } > + > + ts->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); > + if (IS_ERR(ts->reset_gpio)) > + return dev_err_probe(dev, PTR_ERR(ts->reset_gpio), "failed to get reset GPIO\n"); > + > + if (ts->reset_gpio) > + axiom_reset(ts->reset_gpio); > + > + ts->vddi = devm_regulator_get_optional(dev, "vddi"); > + if (!IS_ERR(ts->vddi)) { > + error = devm_regulator_get_enable(dev, "vddi"); > + if (error) > + return dev_err_probe(&client->dev, error, > + "Failed to enable vddi regulator\n"); > + } > + > + ts->vdda = devm_regulator_get_optional(dev, "vdda"); > + if (!IS_ERR(ts->vdda)) { > + error = devm_regulator_get_enable(dev, "vdda"); > + if (error) > + return dev_err_probe(&client->dev, error, > + "Failed to enable vdda regulator\n"); > + msleep(AXIOM_STARTUP_TIME_MS); > + } > + > + error = axiom_discover(ts); > + if (error) > + return dev_err_probe(dev, error, "Failed touchscreen discover\n"); > + > + input_dev = devm_input_allocate_device(ts->dev); > + if (!input_dev) > + return -ENOMEM; > + > + input_dev->name = "TouchNetix axiom Touchscreen"; > + input_dev->phys = "input/axiom_ts"; > + > + input_set_abs_params(input_dev, ABS_MT_POSITION_X, 0, 65535, 0, 0); > + input_set_abs_params(input_dev, ABS_MT_POSITION_Y, 0, 65535, 0, 0); > + input_set_abs_params(input_dev, ABS_MT_TOOL_TYPE, 0, MT_TOOL_MAX, 0, 0); > + input_set_abs_params(input_dev, ABS_MT_DISTANCE, 0, 127, 0, 0); > + input_set_abs_params(input_dev, ABS_MT_PRESSURE, 0, 127, 0, 0); > + > + touchscreen_parse_properties(input_dev, true, &ts->prop); > + > + /* Registers the axiom device as a touchscreen instead of a mouse pointer */ > + error = input_mt_init_slots(input_dev, AXIOM_U41_MAX_TARGETS, INPUT_MT_DIRECT); > + if (error) > + return error; > + > + /* Enables the raw data for up to 4 force channels to be sent to the input subsystem */ > + set_bit(EV_REL, input_dev->evbit); > + set_bit(EV_MSC, input_dev->evbit); > + /* Declare that we support "RAW" Miscellaneous events */ > + set_bit(MSC_RAW, input_dev->mscbit); > + > + ts->input_dev = input_dev; > + input_set_drvdata(ts->input_dev, ts); > + > + /* Ensure that all reports are initialised to not be present. */ > + for (target = 0; target < AXIOM_U41_MAX_TARGETS; target++) > + ts->targets[target].state = AXIOM_TARGET_STATE_NOT_PRESENT; > + > + error = devm_request_threaded_irq(dev, client->irq, NULL, > + axiom_irq, IRQF_ONESHOT, dev_name(dev), ts); > + if (error) { > + dev_info(dev, "Request irq failed, falling back to polling mode"); > + > + error = input_setup_polling(input_dev, axiom_i2c_poll); > + if (error) > + return dev_err_probe(ts->dev, error, "Unable to set up polling mode\n"); > + > + if (!device_property_read_u32(ts->dev, "poll-interval", &poll_interval)) > + input_set_poll_interval(input_dev, poll_interval); > + else > + input_set_poll_interval(input_dev, POLL_INTERVAL_DEFAULT_MS); > + } > + > + error = input_register_device(input_dev); > + if (error) > + return dev_err_probe(ts->dev, error, > + "Could not register with Input Sub-system.\n"); > + > + return 0; > +} > + > +static const struct i2c_device_id axiom_i2c_id_table[] = { > + { "ax54a" }, > + { }, > +}; > +MODULE_DEVICE_TABLE(i2c, axiom_i2c_id_table); > + > +static const struct of_device_id axiom_i2c_of_match[] = { > + { .compatible = "touchnetix,ax54a", }, > + { } > +}; > +MODULE_DEVICE_TABLE(of, axiom_i2c_of_match); > + > +static struct i2c_driver axiom_i2c_driver = { > + .driver = { > + .name = "axiom", > + .of_match_table = axiom_i2c_of_match, > + }, > + .id_table = axiom_i2c_id_table, > + .probe = axiom_i2c_probe, > +}; > +module_i2c_driver(axiom_i2c_driver); > + > +MODULE_AUTHOR("Bart Prescott <bartp@baasheep.co.uk>"); > +MODULE_AUTHOR("Pedro Torruella <pedro.torruella@touchnetix.com>"); > +MODULE_AUTHOR("Mark Satterthwaite <mark.satterthwaite@touchnetix.com>"); > +MODULE_AUTHOR("Hannah Rossiter <hannah.rossiter@touchnetix.com>"); > +MODULE_AUTHOR("Kamel Bouhara <kamel.bouhara@bootlin.com>"); > +MODULE_DESCRIPTION("TouchNetix axiom touchscreen I2C bus driver"); > +MODULE_LICENSE("GPL"); > -- > 2.25.1 >
Le Mon, Feb 19, 2024 at 10:58:22AM +0000, SHUKLA Mamta Ramendra a écrit : > > > Hello Kamel, Hello, [...] > > + > > +/* > > + * Support function to axiom_process_u41_report. > > + * Generates input-subsystem events for every target. > > + * After calling this function the caller shall issue > > + * a Sync to the input sub-system. > > + */ > > +static bool axiom_process_u41_report_target(struct axiom_data *ts, > > + struct axiom_target_report *target) > > +{ > > + struct input_dev *input_dev = ts->input_dev; > > + struct axiom_u41_target *target_prev_state; > > + enum axiom_target_state current_state; > > + int id; > > + > > + /* Verify the target index */ > > + if (target->index >= AXIOM_U41_MAX_TARGETS) { > > + dev_err(ts->dev, "Invalid target index! %u\n", target->index); > > + return false; > > + } > > + > > + target_prev_state = &ts->targets[target->index]; > > + > > + current_state = AXIOM_TARGET_STATE_NOT_PRESENT; > > + > > + if (target->present) { > > + if (target->z >= 0) > > + current_state = AXIOM_TARGET_STATE_TOUCHING; > > + else if (target->z > AXIOM_PROX_LEVEL && target->z < 0) > > + current_state = AXIOM_TARGET_STATE_HOVER; > > + else if (target->z == AXIOM_PROX_LEVEL) > > + current_state = AXIOM_TARGET_STATE_PROX; > > + } > > + > > + if (target_prev_state->state == current_state && > > + target_prev_state->x == target->x && > > + target_prev_state->y == target->y && > > + target_prev_state->z == target->z) > > + return false; > > + > > + id = target->index; > > + > > + dev_dbg(ts->dev, "U41 Target T%u, slot:%u present:%u, x:%u, y:%u, z:%d\n", > > + target->index, slot, target->present, > > + target->x, target->y, target->z); > > This doesn't compile. You forgot to replace slot with id. > > > - dev_dbg(ts->dev, "U41 Target T%u, slot:%u present:%u, x:%u, > y:%u, z:%d\n", > - target->index, slot, target->present, > + dev_dbg(ts->dev, "U41 Target T%u, id:%u present:%u, x:%u, y:%u, > z:%d\n", > + target->index, id, target->present, > I don't know how I could missed this one :/ ! Fixed thanks ! -- Kamel Bouhara, Bootlin Embedded Linux and kernel engineering https://bootlin.com
Hi Kamel,
kernel test robot noticed the following build errors:
[auto build test ERROR on dtor-input/next]
[also build test ERROR on dtor-input/for-linus robh/for-next krzk-dt/for-next linus/master v6.8-rc5 next-20240219]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Kamel-Bouhara/dt-bindings-vendor-prefixes-Add-TouchNetix-AS/20240219-181550
base: https://git.kernel.org/pub/scm/linux/kernel/git/dtor/input.git next
patch link: https://lore.kernel.org/r/20240219101221.129750-4-kamel.bouhara%40bootlin.com
patch subject: [PATCH v8 3/3] Input: Add TouchNetix axiom i2c touchscreen driver
config: i386-buildonly-randconfig-002-20240220 (https://download.01.org/0day-ci/archive/20240220/202402200849.ABf6sZnr-lkp@intel.com/config)
compiler: gcc-7 (Ubuntu 7.5.0-6ubuntu2) 7.5.0
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240220/202402200849.ABf6sZnr-lkp@intel.com/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202402200849.ABf6sZnr-lkp@intel.com/
All errors (new ones prefixed by >>):
In file included from include/linux/device.h:15:0,
from drivers/input/touchscreen/touchnetix_axiom.c:17:
drivers/input/touchscreen/touchnetix_axiom.c: In function 'axiom_process_u41_report_target':
>> drivers/input/touchscreen/touchnetix_axiom.c:332:18: error: 'slot' undeclared (first use in this function); did you mean 'sget'?
target->index, slot, target->present,
^
include/linux/dev_printk.h:129:34: note: in definition of macro 'dev_printk'
_dev_printk(level, dev, fmt, ##__VA_ARGS__); \
^~~~~~~~~~~
drivers/input/touchscreen/touchnetix_axiom.c:331:2: note: in expansion of macro 'dev_dbg'
dev_dbg(ts->dev, "U41 Target T%u, slot:%u present:%u, x:%u, y:%u, z:%d\n",
^~~~~~~
drivers/input/touchscreen/touchnetix_axiom.c:332:18: note: each undeclared identifier is reported only once for each function it appears in
target->index, slot, target->present,
^
include/linux/dev_printk.h:129:34: note: in definition of macro 'dev_printk'
_dev_printk(level, dev, fmt, ##__VA_ARGS__); \
^~~~~~~~~~~
drivers/input/touchscreen/touchnetix_axiom.c:331:2: note: in expansion of macro 'dev_dbg'
dev_dbg(ts->dev, "U41 Target T%u, slot:%u present:%u, x:%u, y:%u, z:%d\n",
^~~~~~~
vim +332 drivers/input/touchscreen/touchnetix_axiom.c
289
290 /*
291 * Support function to axiom_process_u41_report.
292 * Generates input-subsystem events for every target.
293 * After calling this function the caller shall issue
294 * a Sync to the input sub-system.
295 */
296 static bool axiom_process_u41_report_target(struct axiom_data *ts,
297 struct axiom_target_report *target)
298 {
299 struct input_dev *input_dev = ts->input_dev;
300 struct axiom_u41_target *target_prev_state;
301 enum axiom_target_state current_state;
302 int id;
303
304 /* Verify the target index */
305 if (target->index >= AXIOM_U41_MAX_TARGETS) {
306 dev_err(ts->dev, "Invalid target index! %u\n", target->index);
307 return false;
308 }
309
310 target_prev_state = &ts->targets[target->index];
311
312 current_state = AXIOM_TARGET_STATE_NOT_PRESENT;
313
314 if (target->present) {
315 if (target->z >= 0)
316 current_state = AXIOM_TARGET_STATE_TOUCHING;
317 else if (target->z > AXIOM_PROX_LEVEL && target->z < 0)
318 current_state = AXIOM_TARGET_STATE_HOVER;
319 else if (target->z == AXIOM_PROX_LEVEL)
320 current_state = AXIOM_TARGET_STATE_PROX;
321 }
322
323 if (target_prev_state->state == current_state &&
324 target_prev_state->x == target->x &&
325 target_prev_state->y == target->y &&
326 target_prev_state->z == target->z)
327 return false;
328
329 id = target->index;
330
331 dev_dbg(ts->dev, "U41 Target T%u, slot:%u present:%u, x:%u, y:%u, z:%d\n",
> 332 target->index, slot, target->present,
333 target->x, target->y, target->z);
334
335 switch (current_state) {
336 case AXIOM_TARGET_STATE_NOT_PRESENT:
337 case AXIOM_TARGET_STATE_PROX:
338 if (!target_prev_state->insert)
339 break;
340 target_prev_state->insert = false;
341
342 if (!id)
343 input_report_key(input_dev, BTN_TOUCH, 0);
344
345 input_mt_report_slot_inactive(input_dev);
346 /*
347 * make sure the previous coordinates are
348 * all off screen when the finger comes back
349 */
350 target->x = 65535;
351 target->y = 65535;
352 target->z = AXIOM_PROX_LEVEL;
353 break;
354 case AXIOM_TARGET_STATE_HOVER:
355 case AXIOM_TARGET_STATE_TOUCHING:
356 target_prev_state->insert = true;
357 input_report_abs(input_dev, ABS_MT_TRACKING_ID, id);
358 input_report_abs(input_dev, ABS_MT_POSITION_X, target->x);
359 input_report_abs(input_dev, ABS_MT_POSITION_Y, target->y);
360
361 if (current_state == AXIOM_TARGET_STATE_TOUCHING) {
362 input_report_abs(input_dev, ABS_MT_DISTANCE, 0);
363 input_report_abs(input_dev, ABS_DISTANCE, 0);
364 input_report_abs(input_dev, ABS_MT_PRESSURE, target->z);
365 input_report_abs(input_dev, ABS_PRESSURE, target->z);
366 } else {
367 input_report_abs(input_dev, ABS_MT_DISTANCE, -target->z);
368 input_report_abs(input_dev, ABS_DISTANCE, -target->z);
369 input_report_abs(input_dev, ABS_MT_PRESSURE, 0);
370 input_report_abs(input_dev, ABS_PRESSURE, 0);
371 }
372
373 if (!id)
374 input_report_key(input_dev, BTN_TOUCH, (current_state ==
375 AXIOM_TARGET_STATE_TOUCHING));
376 break;
377 default:
378 break;
379 }
380
381 target_prev_state->state = current_state;
382 target_prev_state->x = target->x;
383 target_prev_state->y = target->y;
384 target_prev_state->z = target->z;
385
386 return true;
387 }
388
Hi Kamel, kernel test robot noticed the following build errors: [auto build test ERROR on dtor-input/next] [also build test ERROR on dtor-input/for-linus robh/for-next krzk-dt/for-next linus/master v6.8-rc5 next-20240219] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in https://git-scm.com/docs/git-format-patch#_base_tree_information] url: https://github.com/intel-lab-lkp/linux/commits/Kamel-Bouhara/dt-bindings-vendor-prefixes-Add-TouchNetix-AS/20240219-181550 base: https://git.kernel.org/pub/scm/linux/kernel/git/dtor/input.git next patch link: https://lore.kernel.org/r/20240219101221.129750-4-kamel.bouhara%40bootlin.com patch subject: [PATCH v8 3/3] Input: Add TouchNetix axiom i2c touchscreen driver config: arm64-randconfig-002-20240220 (https://download.01.org/0day-ci/archive/20240220/202402201157.BKo97uWl-lkp@intel.com/config) compiler: clang version 19.0.0git (https://github.com/llvm/llvm-project 36adfec155de366d722f2bac8ff9162289dcf06c) reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240220/202402201157.BKo97uWl-lkp@intel.com/reproduce) If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags | Reported-by: kernel test robot <lkp@intel.com> | Closes: https://lore.kernel.org/oe-kbuild-all/202402201157.BKo97uWl-lkp@intel.com/ All errors (new ones prefixed by >>): >> drivers/input/touchscreen/touchnetix_axiom.c:332:18: error: use of undeclared identifier 'slot'; did you mean 'sget'? 332 | target->index, slot, target->present, | ^~~~ | sget include/linux/dev_printk.h:163:47: note: expanded from macro 'dev_dbg' 163 | dev_printk(KERN_DEBUG, dev, dev_fmt(fmt), ##__VA_ARGS__); \ | ^ include/linux/dev_printk.h:129:34: note: expanded from macro 'dev_printk' 129 | _dev_printk(level, dev, fmt, ##__VA_ARGS__); \ | ^ include/linux/fs.h:2272:21: note: 'sget' declared here 2272 | struct super_block *sget(struct file_system_type *type, | ^ 1 error generated. vim +332 drivers/input/touchscreen/touchnetix_axiom.c 289 290 /* 291 * Support function to axiom_process_u41_report. 292 * Generates input-subsystem events for every target. 293 * After calling this function the caller shall issue 294 * a Sync to the input sub-system. 295 */ 296 static bool axiom_process_u41_report_target(struct axiom_data *ts, 297 struct axiom_target_report *target) 298 { 299 struct input_dev *input_dev = ts->input_dev; 300 struct axiom_u41_target *target_prev_state; 301 enum axiom_target_state current_state; 302 int id; 303 304 /* Verify the target index */ 305 if (target->index >= AXIOM_U41_MAX_TARGETS) { 306 dev_err(ts->dev, "Invalid target index! %u\n", target->index); 307 return false; 308 } 309 310 target_prev_state = &ts->targets[target->index]; 311 312 current_state = AXIOM_TARGET_STATE_NOT_PRESENT; 313 314 if (target->present) { 315 if (target->z >= 0) 316 current_state = AXIOM_TARGET_STATE_TOUCHING; 317 else if (target->z > AXIOM_PROX_LEVEL && target->z < 0) 318 current_state = AXIOM_TARGET_STATE_HOVER; 319 else if (target->z == AXIOM_PROX_LEVEL) 320 current_state = AXIOM_TARGET_STATE_PROX; 321 } 322 323 if (target_prev_state->state == current_state && 324 target_prev_state->x == target->x && 325 target_prev_state->y == target->y && 326 target_prev_state->z == target->z) 327 return false; 328 329 id = target->index; 330 331 dev_dbg(ts->dev, "U41 Target T%u, slot:%u present:%u, x:%u, y:%u, z:%d\n", > 332 target->index, slot, target->present, 333 target->x, target->y, target->z); 334 335 switch (current_state) { 336 case AXIOM_TARGET_STATE_NOT_PRESENT: 337 case AXIOM_TARGET_STATE_PROX: 338 if (!target_prev_state->insert) 339 break; 340 target_prev_state->insert = false; 341 342 if (!id) 343 input_report_key(input_dev, BTN_TOUCH, 0); 344 345 input_mt_report_slot_inactive(input_dev); 346 /* 347 * make sure the previous coordinates are 348 * all off screen when the finger comes back 349 */ 350 target->x = 65535; 351 target->y = 65535; 352 target->z = AXIOM_PROX_LEVEL; 353 break; 354 case AXIOM_TARGET_STATE_HOVER: 355 case AXIOM_TARGET_STATE_TOUCHING: 356 target_prev_state->insert = true; 357 input_report_abs(input_dev, ABS_MT_TRACKING_ID, id); 358 input_report_abs(input_dev, ABS_MT_POSITION_X, target->x); 359 input_report_abs(input_dev, ABS_MT_POSITION_Y, target->y); 360 361 if (current_state == AXIOM_TARGET_STATE_TOUCHING) { 362 input_report_abs(input_dev, ABS_MT_DISTANCE, 0); 363 input_report_abs(input_dev, ABS_DISTANCE, 0); 364 input_report_abs(input_dev, ABS_MT_PRESSURE, target->z); 365 input_report_abs(input_dev, ABS_PRESSURE, target->z); 366 } else { 367 input_report_abs(input_dev, ABS_MT_DISTANCE, -target->z); 368 input_report_abs(input_dev, ABS_DISTANCE, -target->z); 369 input_report_abs(input_dev, ABS_MT_PRESSURE, 0); 370 input_report_abs(input_dev, ABS_PRESSURE, 0); 371 } 372 373 if (!id) 374 input_report_key(input_dev, BTN_TOUCH, (current_state == 375 AXIOM_TARGET_STATE_TOUCHING)); 376 break; 377 default: 378 break; 379 } 380 381 target_prev_state->state = current_state; 382 target_prev_state->x = target->x; 383 target_prev_state->y = target->y; 384 target_prev_state->z = target->z; 385 386 return true; 387 } 388
diff --git a/MAINTAINERS b/MAINTAINERS index 4b3ed2f22b89..de5fad8f317a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -22262,6 +22262,7 @@ M: Kamel Bouhara <kamel.bouhara@bootlin.com> L: linux-input@vger.kernel.org S: Maintained F: Documentation/devicetree/bindings/input/touchscreen/touchnetix,ax54a.yaml +F: drivers/input/touchscreen/touchnetix_axiom.c TPM DEVICE DRIVER M: Peter Huewe <peterhuewe@gmx.de> diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index e3e2324547b9..f36bee8d8696 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -803,6 +803,18 @@ config TOUCHSCREEN_MIGOR To compile this driver as a module, choose M here: the module will be called migor_ts. +config TOUCHSCREEN_TOUCHNETIX_AXIOM + tristate "TouchNetix AXIOM based touchscreen controllers" + depends on I2C + help + Say Y here if you have a axiom touchscreen connected to + your system. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called axiom. + config TOUCHSCREEN_TOUCHRIGHT tristate "Touchright serial touchscreen" select SERIO diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 62bd24f3ac8e..8e32a2df5e18 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -88,6 +88,7 @@ obj-$(CONFIG_TOUCHSCREEN_SUR40) += sur40.o obj-$(CONFIG_TOUCHSCREEN_SURFACE3_SPI) += surface3_spi.o obj-$(CONFIG_TOUCHSCREEN_TI_AM335X_TSC) += ti_am335x_tsc.o obj-$(CONFIG_TOUCHSCREEN_TOUCHIT213) += touchit213.o +obj-$(CONFIG_TOUCHSCREEN_TOUCHNETIX_AXIOM) += touchnetix_axiom.o obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT) += touchright.o obj-$(CONFIG_TOUCHSCREEN_TOUCHWIN) += touchwin.o obj-$(CONFIG_TOUCHSCREEN_TS4800) += ts4800-ts.o diff --git a/drivers/input/touchscreen/touchnetix_axiom.c b/drivers/input/touchscreen/touchnetix_axiom.c new file mode 100644 index 000000000000..f7d1b23a4baf --- /dev/null +++ b/drivers/input/touchscreen/touchnetix_axiom.c @@ -0,0 +1,669 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * TouchNetix axiom Touchscreen Driver + * + * Copyright (C) 2020-2023 TouchNetix Ltd. + * + * Author(s): Bart Prescott <bartp@baasheep.co.uk> + * Pedro Torruella <pedro.torruella@touchnetix.com> + * Mark Satterthwaite <mark.satterthwaite@touchnetix.com> + * Hannah Rossiter <hannah.rossiter@touchnetix.com> + * Kamel Bouhara <kamel.bouhara@bootlin.com> + * + */ +#include <linux/bitfield.h> +#include <linux/crc16.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/gpio/consumer.h> +#include <linux/i2c.h> +#include <linux/input.h> +#include <linux/input/mt.h> +#include <linux/input/touchscreen.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mod_devicetable.h> +#include <linux/regmap.h> + +#include <asm/unaligned.h> +#define AXIOM_PROX_LEVEL -128 +#define AXIOM_DMA_OPS_DELAY_USEC 250 +#define AXIOM_STARTUP_TIME_MS 110 +/* + * Register group u31 has 2 pages for usage table entries. + */ +#define AXIOM_U31_MAX_USAGES 0xff +#define AXIOM_U31_BYTES_PER_USAGE 6 +#define AXIOM_U31_PAGE0_LENGTH 0x0C +#define AXIOM_U31_BOOTMODE_MASK BIT(7) +#define AXIOM_U31_DEVID_MASK GENMASK(14, 0) + +#define AXIOM_MAX_REPORT_LEN 0x7f + +#define AXIOM_CMD_HEADER_READ_MASK BIT(15) +#define AXIOM_U41_MAX_TARGETS 10 + +#define AXIOM_U46_AUX_CHANNELS 4 +#define AXIOM_U46_AUX_MASK GENMASK(11, 0) + +#define AXIOM_COMMS_MAX_USAGE_PAGES 3 +#define AXIOM_COMMS_PAGE_SIZE 256 +#define AXIOM_COMMS_REPORT_LEN_MASK GENMASK(6, 0) + +#define AXIOM_REPORT_USAGE_ID 0x34 +#define AXIOM_DEVINFO_USAGE_ID 0x31 +#define AXIOM_USAGE_2HB_REPORT_ID 0x01 +#define AXIOM_USAGE_2AUX_REPORT_ID 0x46 +#define AXIOM_USAGE_2DCTS_REPORT_ID 0x41 + +#define AXIOM_PAGE_OFFSET_MASK GENMASK(6, 0) + +struct axiom_devinfo { + __le16 device_id; + u8 fw_minor; + u8 fw_major; + u8 fw_info_extra; + u8 tcp_revision; + u8 bootloader_fw_minor; + u8 bootloader_fw_major; + __le16 jedec_id; + u8 num_usages; +} __packed; + +/* + * Describes parameters of a specific usage, essentially a single element of + * the "Usage Table" + */ +struct axiom_usage_entry { + u8 id; + u8 is_report; + u8 start_page; + u8 num_pages; +}; + +/* + * Represents state of a touch or target when detected prior to a touch (eg. + * hover or proximity events). + */ +enum axiom_target_state { + AXIOM_TARGET_STATE_NOT_PRESENT = 0, + AXIOM_TARGET_STATE_PROX = 1, + AXIOM_TARGET_STATE_HOVER = 2, + AXIOM_TARGET_STATE_TOUCHING = 3, +}; + +struct axiom_u41_target { + enum axiom_target_state state; + u16 x; + u16 y; + s8 z; + bool insert; + bool touch; +}; + +struct axiom_target_report { + u8 index; + u8 present; + u16 x; + u16 y; + s8 z; +}; + +struct axiom_cmd_header { + __le16 target_address; + __le16 length; +} __packed; + +struct axiom_data { + struct axiom_devinfo devinfo; + struct device *dev; + struct gpio_desc *reset_gpio; + struct i2c_client *client; + struct input_dev *input_dev; + u32 max_report_len; + u8 rx_buf[AXIOM_COMMS_MAX_USAGE_PAGES * AXIOM_COMMS_PAGE_SIZE]; + struct axiom_u41_target targets[AXIOM_U41_MAX_TARGETS]; + struct axiom_usage_entry usage_table[AXIOM_U31_MAX_USAGES]; + bool usage_table_populated; + struct regulator *vdda; + struct regulator *vddi; + struct regmap *regmap; + struct touchscreen_properties prop; +}; + +static const struct regmap_config axiom_i2c_regmap_config = { + .reg_bits = 32, + .reg_format_endian = REGMAP_ENDIAN_LITTLE, + .val_bits = 8, + .val_format_endian = REGMAP_ENDIAN_LITTLE, +}; + +/* + * axiom devices are typically configured to report touches at a rate + * of 100Hz (10ms) for systems that require polling for reports. + * When reports are polled, it will be expected to occasionally + * observe the overflow bit being set in the reports. + * This indicates that reports are not being read fast enough. + */ +#define POLL_INTERVAL_DEFAULT_MS 10 + +/* Translate usage/page/offset triplet into physical address. */ +static u16 axiom_usage_to_target_address(struct axiom_data *ts, u8 usage, u8 page, + char offset) +{ + /* At the moment the convention is that u31 is always at physical address 0x0 */ + if (!ts->usage_table_populated) { + if (usage == AXIOM_DEVINFO_USAGE_ID) + return ((page << 8) + offset); + else + return 0xffff; + } + + if (page >= ts->usage_table[usage].num_pages) { + dev_err(ts->dev, "Invalid usage table! usage: u%02x, page: %02x, offset: %02x\n", + usage, page, offset); + return 0xffff; + } + + return ((ts->usage_table[usage].start_page + page) << 8) + offset; +} + +static int axiom_read(struct axiom_data *ts, u8 usage, u8 page, void *buf, u16 len) +{ + struct axiom_cmd_header cmd_header; + u32 preamble; + int ret; + + cmd_header.target_address = cpu_to_le16(axiom_usage_to_target_address(ts, usage, page, 0)); + cmd_header.length = cpu_to_le16(len | AXIOM_CMD_HEADER_READ_MASK); + + preamble = get_unaligned_le32(&cmd_header); + + ret = regmap_write(ts->regmap, preamble, 0); + if (ret) { + dev_err(ts->dev, "failed to write preamble, error %d\n", ret); + return ret; + } + + ret = regmap_raw_read(ts->regmap, 0, buf, len); + if (ret) { + dev_err(ts->dev, "failed to read target address %04x, error %d\n", + cmd_header.target_address, ret); + return ret; + } + + /* Wait device's DMA operations */ + usleep_range(AXIOM_DMA_OPS_DELAY_USEC, AXIOM_DMA_OPS_DELAY_USEC + 50); + + return 0; +} + +/* + * One of the main purposes for reading the usage table is to identify + * which usages reside at which target address. + * When performing subsequent reads or writes to AXIOM, the target address + * is used to specify which usage is being accessed. + * Consider the following discovery code which will build up the usage table. + */ +static u32 axiom_populate_usage_table(struct axiom_data *ts) +{ + struct axiom_usage_entry *usage_table; + u8 *rx_data = ts->rx_buf; + u32 max_report_len = 0; + u32 usage_id; + int error; + + usage_table = ts->usage_table; + + /* Read the second page of usage u31 to get the usage table */ + error = axiom_read(ts, AXIOM_DEVINFO_USAGE_ID, 1, rx_data, + (AXIOM_U31_BYTES_PER_USAGE * ts->devinfo.num_usages)); + + if (error) + return error; + + for (usage_id = 0; usage_id < ts->devinfo.num_usages; usage_id++) { + u16 offset = (usage_id * AXIOM_U31_BYTES_PER_USAGE); + u8 id = rx_data[offset + 0]; + u8 start_page = rx_data[offset + 1]; + u8 num_pages = rx_data[offset + 2]; + u32 max_offset = ((rx_data[offset + 3] & AXIOM_PAGE_OFFSET_MASK) + 1) * 2; + + usage_table[id].is_report = !num_pages; + + /* Store the entry into the usage table */ + usage_table[id].id = id; + usage_table[id].start_page = start_page; + usage_table[id].num_pages = num_pages; + + dev_dbg(ts->dev, "Usage u%02x Info: %*ph\n", id, AXIOM_U31_BYTES_PER_USAGE, + &rx_data[offset]); + + /* Identify the max report length the module will receive */ + if (usage_table[id].is_report && max_offset > max_report_len) + max_report_len = max_offset; + } + + ts->usage_table_populated = true; + + return max_report_len; +} + +static int axiom_discover(struct axiom_data *ts) +{ + int error; + + /* + * Fetch the first page of usage u31 to get the + * device information and the number of usages + */ + error = axiom_read(ts, AXIOM_DEVINFO_USAGE_ID, 0, &ts->devinfo, AXIOM_U31_PAGE0_LENGTH); + if (error) + return error; + + dev_dbg(ts->dev, " Boot Mode : %s\n", + FIELD_GET(AXIOM_U31_BOOTMODE_MASK, + le16_to_cpu(ts->devinfo.device_id)) ? "BLP" : "TCP"); + dev_dbg(ts->dev, " Device ID : %04lx\n", + FIELD_GET(AXIOM_U31_DEVID_MASK, le16_to_cpu(ts->devinfo.device_id))); + dev_dbg(ts->dev, " Firmware Rev : %02x.%02x\n", ts->devinfo.fw_major, + ts->devinfo.fw_minor); + dev_dbg(ts->dev, " Bootloader Rev : %02x.%02x\n", ts->devinfo.bootloader_fw_major, + ts->devinfo.bootloader_fw_minor); + dev_dbg(ts->dev, " FW Extra Info : %04x\n", ts->devinfo.fw_info_extra); + dev_dbg(ts->dev, " Silicon : %04x\n", le16_to_cpu(ts->devinfo.jedec_id)); + dev_dbg(ts->dev, " Number usages : %04x\n", ts->devinfo.num_usages); + + ts->max_report_len = axiom_populate_usage_table(ts); + if (!ts->max_report_len || !ts->devinfo.num_usages || + ts->max_report_len > AXIOM_MAX_REPORT_LEN) { + dev_err(ts->dev, "Invalid report length or usages number"); + return -EINVAL; + } + + dev_dbg(ts->dev, "Max Report Length: %u\n", ts->max_report_len); + + return 0; +} + +/* + * Support function to axiom_process_u41_report. + * Generates input-subsystem events for every target. + * After calling this function the caller shall issue + * a Sync to the input sub-system. + */ +static bool axiom_process_u41_report_target(struct axiom_data *ts, + struct axiom_target_report *target) +{ + struct input_dev *input_dev = ts->input_dev; + struct axiom_u41_target *target_prev_state; + enum axiom_target_state current_state; + int id; + + /* Verify the target index */ + if (target->index >= AXIOM_U41_MAX_TARGETS) { + dev_err(ts->dev, "Invalid target index! %u\n", target->index); + return false; + } + + target_prev_state = &ts->targets[target->index]; + + current_state = AXIOM_TARGET_STATE_NOT_PRESENT; + + if (target->present) { + if (target->z >= 0) + current_state = AXIOM_TARGET_STATE_TOUCHING; + else if (target->z > AXIOM_PROX_LEVEL && target->z < 0) + current_state = AXIOM_TARGET_STATE_HOVER; + else if (target->z == AXIOM_PROX_LEVEL) + current_state = AXIOM_TARGET_STATE_PROX; + } + + if (target_prev_state->state == current_state && + target_prev_state->x == target->x && + target_prev_state->y == target->y && + target_prev_state->z == target->z) + return false; + + id = target->index; + + dev_dbg(ts->dev, "U41 Target T%u, slot:%u present:%u, x:%u, y:%u, z:%d\n", + target->index, slot, target->present, + target->x, target->y, target->z); + + switch (current_state) { + case AXIOM_TARGET_STATE_NOT_PRESENT: + case AXIOM_TARGET_STATE_PROX: + if (!target_prev_state->insert) + break; + target_prev_state->insert = false; + + if (!id) + input_report_key(input_dev, BTN_TOUCH, 0); + + input_mt_report_slot_inactive(input_dev); + /* + * make sure the previous coordinates are + * all off screen when the finger comes back + */ + target->x = 65535; + target->y = 65535; + target->z = AXIOM_PROX_LEVEL; + break; + case AXIOM_TARGET_STATE_HOVER: + case AXIOM_TARGET_STATE_TOUCHING: + target_prev_state->insert = true; + input_report_abs(input_dev, ABS_MT_TRACKING_ID, id); + input_report_abs(input_dev, ABS_MT_POSITION_X, target->x); + input_report_abs(input_dev, ABS_MT_POSITION_Y, target->y); + + if (current_state == AXIOM_TARGET_STATE_TOUCHING) { + input_report_abs(input_dev, ABS_MT_DISTANCE, 0); + input_report_abs(input_dev, ABS_DISTANCE, 0); + input_report_abs(input_dev, ABS_MT_PRESSURE, target->z); + input_report_abs(input_dev, ABS_PRESSURE, target->z); + } else { + input_report_abs(input_dev, ABS_MT_DISTANCE, -target->z); + input_report_abs(input_dev, ABS_DISTANCE, -target->z); + input_report_abs(input_dev, ABS_MT_PRESSURE, 0); + input_report_abs(input_dev, ABS_PRESSURE, 0); + } + + if (!id) + input_report_key(input_dev, BTN_TOUCH, (current_state == + AXIOM_TARGET_STATE_TOUCHING)); + break; + default: + break; + } + + target_prev_state->state = current_state; + target_prev_state->x = target->x; + target_prev_state->y = target->y; + target_prev_state->z = target->z; + + return true; +} + +/* + * U41 is the output report of the 2D CTS and contains the status of targets + * (including contacts and pre-contacts) along with their X,Y,Z values. + * When a target has been removed (no longer detected), + * the corresponding X,Y,Z values will be zeroed. + */ +static bool axiom_process_u41_report(struct axiom_data *ts, u8 *rx_buf) +{ + struct axiom_target_report target; + bool update_done = false; + u16 target_status; + int i; + + target_status = get_unaligned_le16(rx_buf + 1); + + for (i = 0; i < AXIOM_U41_MAX_TARGETS; i++) { + u8 *target_step = &rx_buf[i * 4]; + + target.index = i; + input_mt_slot(ts->input_dev, i); + input_mt_report_slot_state(ts->input_dev, MT_TOOL_FINGER, true); + target.present = ((target_status & (1 << i)) != 0) ? 1 : 0; + target.x = get_unaligned_le16(target_step + 3); + target.y = get_unaligned_le16(target_step + 5); + target.z = (s8)(rx_buf[i + 43]); + touchscreen_report_pos(ts->input_dev, &ts->prop, target.x, target.y, true); + update_done |= axiom_process_u41_report_target(ts, &target); + } + + return update_done; +} + +/* + * U46 report contains a low level measurement data generated by the capacitive + * displacement sensor (CDS) algorithms from the auxiliary channels. + * This information is useful when tuning multi-press to assess mechanical + * consistency in the unit's construction. + */ +static void axiom_process_u46_report(struct axiom_data *ts, u8 *rx_buf) +{ + struct input_dev *input_dev = ts->input_dev; + u32 event_value; + u16 aux_value; + int i; + + for (i = 0; i < AXIOM_U46_AUX_CHANNELS; i++) { + u8 *target_step = &rx_buf[i * 2]; + + input_mt_slot(input_dev, i); + input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, true); + aux_value = get_unaligned_le16(target_step + 1) & AXIOM_U46_AUX_MASK; + event_value = (i << 16) | (aux_value); + input_event(input_dev, EV_MSC, MSC_RAW, event_value); + } +} + +/* + * Validates the crc and demultiplexes the axiom reports to the appropriate + * report handler + */ +static int axiom_handle_events(struct axiom_data *ts) +{ + struct input_dev *input_dev = ts->input_dev; + u8 *report_data = ts->rx_buf; + struct device *dev = ts->dev; + u16 crc_report; + u8 *crc_bytes; + u16 crc_calc; + int error; + u8 len; + + error = axiom_read(ts, AXIOM_REPORT_USAGE_ID, 0, report_data, ts->max_report_len); + if (error) + return error; + + len = (report_data[0] & AXIOM_COMMS_REPORT_LEN_MASK) << 1; + if (len <= 2) { + dev_err(dev, "Zero length report discarded.\n"); + return -ENODATA; + } + + /* Validate the report CRC */ + crc_bytes = &report_data[len]; + + crc_report = get_unaligned_le16(crc_bytes - 2); + /* Length is in 16 bit words and remove the size of the CRC16 itself */ + crc_calc = crc16(0, report_data, (len - 2)); + + if (crc_calc != crc_report) { + dev_err(dev, + "CRC mismatch! Expected: %#x, Calculated CRC: %#x.\n", + crc_report, crc_calc); + return -EINVAL; + } + + switch (report_data[1]) { + case AXIOM_USAGE_2DCTS_REPORT_ID: + if (axiom_process_u41_report(ts, &report_data[1])) { + input_mt_sync_frame(input_dev); + input_sync(input_dev); + } + break; + + case AXIOM_USAGE_2AUX_REPORT_ID: + /* This is an aux report (force) */ + axiom_process_u46_report(ts, &report_data[1]); + input_mt_sync(input_dev); + input_sync(input_dev); + break; + + case AXIOM_USAGE_2HB_REPORT_ID: + /* This is a heartbeat report */ + break; + default: + return -EINVAL; + } + + return 0; +} + +static void axiom_i2c_poll(struct input_dev *input_dev) +{ + struct axiom_data *ts = input_get_drvdata(input_dev); + + axiom_handle_events(ts); +} + +static irqreturn_t axiom_irq(int irq, void *dev_id) +{ + struct axiom_data *ts = dev_id; + + axiom_handle_events(ts); + + return IRQ_HANDLED; +} + +static void axiom_reset(struct gpio_desc *reset_gpio) +{ + gpiod_set_value_cansleep(reset_gpio, 1); + usleep_range(1000, 2000); + gpiod_set_value_cansleep(reset_gpio, 0); + msleep(AXIOM_STARTUP_TIME_MS); +} + +static int axiom_i2c_probe(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct input_dev *input_dev; + struct axiom_data *ts; + u32 poll_interval; + int target; + int error; + + ts = devm_kzalloc(dev, sizeof(*ts), GFP_KERNEL); + if (!ts) + return -ENOMEM; + + i2c_set_clientdata(client, ts); + ts->client = client; + ts->dev = dev; + + ts->regmap = devm_regmap_init_i2c(client, &axiom_i2c_regmap_config); + error = PTR_ERR_OR_ZERO(ts->regmap); + if (error) { + dev_err(dev, "Failed to initialize regmap: %d\n", error); + return error; + } + + ts->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); + if (IS_ERR(ts->reset_gpio)) + return dev_err_probe(dev, PTR_ERR(ts->reset_gpio), "failed to get reset GPIO\n"); + + if (ts->reset_gpio) + axiom_reset(ts->reset_gpio); + + ts->vddi = devm_regulator_get_optional(dev, "vddi"); + if (!IS_ERR(ts->vddi)) { + error = devm_regulator_get_enable(dev, "vddi"); + if (error) + return dev_err_probe(&client->dev, error, + "Failed to enable vddi regulator\n"); + } + + ts->vdda = devm_regulator_get_optional(dev, "vdda"); + if (!IS_ERR(ts->vdda)) { + error = devm_regulator_get_enable(dev, "vdda"); + if (error) + return dev_err_probe(&client->dev, error, + "Failed to enable vdda regulator\n"); + msleep(AXIOM_STARTUP_TIME_MS); + } + + error = axiom_discover(ts); + if (error) + return dev_err_probe(dev, error, "Failed touchscreen discover\n"); + + input_dev = devm_input_allocate_device(ts->dev); + if (!input_dev) + return -ENOMEM; + + input_dev->name = "TouchNetix axiom Touchscreen"; + input_dev->phys = "input/axiom_ts"; + + input_set_abs_params(input_dev, ABS_MT_POSITION_X, 0, 65535, 0, 0); + input_set_abs_params(input_dev, ABS_MT_POSITION_Y, 0, 65535, 0, 0); + input_set_abs_params(input_dev, ABS_MT_TOOL_TYPE, 0, MT_TOOL_MAX, 0, 0); + input_set_abs_params(input_dev, ABS_MT_DISTANCE, 0, 127, 0, 0); + input_set_abs_params(input_dev, ABS_MT_PRESSURE, 0, 127, 0, 0); + + touchscreen_parse_properties(input_dev, true, &ts->prop); + + /* Registers the axiom device as a touchscreen instead of a mouse pointer */ + error = input_mt_init_slots(input_dev, AXIOM_U41_MAX_TARGETS, INPUT_MT_DIRECT); + if (error) + return error; + + /* Enables the raw data for up to 4 force channels to be sent to the input subsystem */ + set_bit(EV_REL, input_dev->evbit); + set_bit(EV_MSC, input_dev->evbit); + /* Declare that we support "RAW" Miscellaneous events */ + set_bit(MSC_RAW, input_dev->mscbit); + + ts->input_dev = input_dev; + input_set_drvdata(ts->input_dev, ts); + + /* Ensure that all reports are initialised to not be present. */ + for (target = 0; target < AXIOM_U41_MAX_TARGETS; target++) + ts->targets[target].state = AXIOM_TARGET_STATE_NOT_PRESENT; + + error = devm_request_threaded_irq(dev, client->irq, NULL, + axiom_irq, IRQF_ONESHOT, dev_name(dev), ts); + if (error) { + dev_info(dev, "Request irq failed, falling back to polling mode"); + + error = input_setup_polling(input_dev, axiom_i2c_poll); + if (error) + return dev_err_probe(ts->dev, error, "Unable to set up polling mode\n"); + + if (!device_property_read_u32(ts->dev, "poll-interval", &poll_interval)) + input_set_poll_interval(input_dev, poll_interval); + else + input_set_poll_interval(input_dev, POLL_INTERVAL_DEFAULT_MS); + } + + error = input_register_device(input_dev); + if (error) + return dev_err_probe(ts->dev, error, + "Could not register with Input Sub-system.\n"); + + return 0; +} + +static const struct i2c_device_id axiom_i2c_id_table[] = { + { "ax54a" }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, axiom_i2c_id_table); + +static const struct of_device_id axiom_i2c_of_match[] = { + { .compatible = "touchnetix,ax54a", }, + { } +}; +MODULE_DEVICE_TABLE(of, axiom_i2c_of_match); + +static struct i2c_driver axiom_i2c_driver = { + .driver = { + .name = "axiom", + .of_match_table = axiom_i2c_of_match, + }, + .id_table = axiom_i2c_id_table, + .probe = axiom_i2c_probe, +}; +module_i2c_driver(axiom_i2c_driver); + +MODULE_AUTHOR("Bart Prescott <bartp@baasheep.co.uk>"); +MODULE_AUTHOR("Pedro Torruella <pedro.torruella@touchnetix.com>"); +MODULE_AUTHOR("Mark Satterthwaite <mark.satterthwaite@touchnetix.com>"); +MODULE_AUTHOR("Hannah Rossiter <hannah.rossiter@touchnetix.com>"); +MODULE_AUTHOR("Kamel Bouhara <kamel.bouhara@bootlin.com>"); +MODULE_DESCRIPTION("TouchNetix axiom touchscreen I2C bus driver"); +MODULE_LICENSE("GPL");
Add a new driver for the TouchNetix's axiom family of touchscreen controllers. This driver only supports i2c and can be later adapted for SPI and USB support. Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com> --- MAINTAINERS | 1 + drivers/input/touchscreen/Kconfig | 12 + drivers/input/touchscreen/Makefile | 1 + drivers/input/touchscreen/touchnetix_axiom.c | 669 +++++++++++++++++++ 4 files changed, 683 insertions(+) create mode 100644 drivers/input/touchscreen/touchnetix_axiom.c