diff mbox series

[RFC,v4,3/5] regulator: add regulators driver for Marvell 88PM886 PMIC

Message ID 20240311160110.32185-4-karelb@gimli.ms.mff.cuni.cz (mailing list archive)
State New
Headers show
Series initial support for Marvell 88PM886 PMIC | expand

Commit Message

Karel Balej March 11, 2024, 3:51 p.m. UTC 
From: Karel Balej <balejk@matfyz.cz>

Support the LDO and buck regulators of the Marvell 88PM886 PMIC.

Signed-off-by: Karel Balej <balejk@matfyz.cz>
---
Please note that most of the regulators are not yet described: the
descriptions will be added to pm886_regulators in the same manner as the
already present ones before the series leaves the RFC state. In the
meantime, general comments on the driver will be appreciated.

Notes:
    RFC v4:
    - Initialize regulators regmap in the regulators driver.
    - Register all regulators at once.
    - Drop regulator IDs.
    - Add missing '\n' to dev_err_probe message.
    - Fix includes.
    - Add ID table.
    RFC v3:
    - Do not have a variable for each regulator -- define them all in the
      pm886_regulators array.
    - Use new regulators regmap index name.
    - Use dev_err_probe.
    RFC v2:
    - Drop of_compatible and related code.
    - Drop unused include.
    - Remove some abstraction: use only one regmap for all regulators and
      only mention 88PM886 in Kconfig description.
    - Reword commit message.

 drivers/regulator/88pm886-regulator.c | 215 ++++++++++++++++++++++++++
 drivers/regulator/Kconfig             |   6 +
 drivers/regulator/Makefile            |   1 +
 3 files changed, 222 insertions(+)
 create mode 100644 drivers/regulator/88pm886-regulator.c
diff mbox series

Patch

diff --git a/drivers/regulator/88pm886-regulator.c b/drivers/regulator/88pm886-regulator.c
new file mode 100644
index 000000000000..6a2ddb11a28a
--- /dev/null
+++ b/drivers/regulator/88pm886-regulator.c
@@ -0,0 +1,215 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/linear_range.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/of_regulator.h>
+
+#include <linux/mfd/88pm886.h>
+
+#define PM886_PAGE_OFFSET_REGULATORS	1
+
+#define PM886_REG_LDO_EN1		0x09
+#define PM886_REG_LDO_EN2		0x0a
+
+#define PM886_REG_BUCK_EN		0x08
+
+#define PM886_REG_LDO1_VOUT		0x20
+#define PM886_REG_LDO2_VOUT		0x26
+#define PM886_REG_LDO3_VOUT		0x2c
+#define PM886_REG_LDO4_VOUT		0x32
+#define PM886_REG_LDO5_VOUT		0x38
+#define PM886_REG_LDO6_VOUT		0x3e
+#define PM886_REG_LDO7_VOUT		0x44
+#define PM886_REG_LDO8_VOUT		0x4a
+#define PM886_REG_LDO9_VOUT		0x50
+#define PM886_REG_LDO10_VOUT		0x56
+#define PM886_REG_LDO11_VOUT		0x5c
+#define PM886_REG_LDO12_VOUT		0x62
+#define PM886_REG_LDO13_VOUT		0x68
+#define PM886_REG_LDO14_VOUT		0x6e
+#define PM886_REG_LDO15_VOUT		0x74
+#define PM886_REG_LDO16_VOUT		0x7a
+
+#define PM886_REG_BUCK1_VOUT		0xa5
+#define PM886_REG_BUCK2_VOUT		0xb3
+#define PM886_REG_BUCK3_VOUT		0xc1
+#define PM886_REG_BUCK4_VOUT		0xcf
+#define PM886_REG_BUCK5_VOUT		0xdd
+
+#define PM886_LDO_VSEL_MASK		0x0f
+#define PM886_BUCK_VSEL_MASK		0x7f
+
+struct pm886_regulator {
+	struct regulator_desc desc;
+	int max_uA;
+};
+
+static int pm886_regulator_get_ilim(struct regulator_dev *rdev)
+{
+	struct pm886_regulator *data = rdev_get_drvdata(rdev);
+
+	if (!data) {
+		dev_err(&rdev->dev, "Failed to get regulator data\n");
+		return -EINVAL;
+	}
+	return data->max_uA;
+}
+
+static const struct regulator_ops pm886_ldo_ops = {
+	.list_voltage = regulator_list_voltage_table,
+	.map_voltage = regulator_map_voltage_iterate,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.get_current_limit = pm886_regulator_get_ilim,
+};
+
+static const struct regulator_ops pm886_buck_ops = {
+	.list_voltage = regulator_list_voltage_linear_range,
+	.map_voltage = regulator_map_voltage_linear_range,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.get_current_limit = pm886_regulator_get_ilim,
+};
+
+static const unsigned int pm886_ldo_volt_table1[] = {
+	1700000, 1800000, 1900000, 2500000, 2800000, 2900000, 3100000, 3300000,
+};
+
+static const unsigned int pm886_ldo_volt_table2[] = {
+	1200000, 1250000, 1700000, 1800000, 1850000, 1900000, 2500000, 2600000,
+	2700000, 2750000, 2800000, 2850000, 2900000, 3000000, 3100000, 3300000,
+};
+
+static const unsigned int pm886_ldo_volt_table3[] = {
+	1700000, 1800000, 1900000, 2000000, 2100000, 2500000, 2700000, 2800000,
+};
+
+static const struct linear_range pm886_buck_volt_ranges1[] = {
+	REGULATOR_LINEAR_RANGE(600000, 0, 79, 12500),
+	REGULATOR_LINEAR_RANGE(1600000, 80, 84, 50000),
+};
+
+static const struct linear_range pm886_buck_volt_ranges2[] = {
+	REGULATOR_LINEAR_RANGE(600000, 0, 79, 12500),
+	REGULATOR_LINEAR_RANGE(1600000, 80, 114, 50000),
+};
+
+static struct pm886_regulator pm886_regulators[] = {
+	{
+		.desc = {
+			.name = "LDO2",
+			.regulators_node = "regulators",
+			.of_match = "ldo2",
+			.ops = &pm886_ldo_ops,
+			.type = REGULATOR_VOLTAGE,
+			.enable_reg = PM886_REG_LDO_EN1,
+			.enable_mask = BIT(1),
+			.volt_table = pm886_ldo_volt_table1,
+			.n_voltages = ARRAY_SIZE(pm886_ldo_volt_table1),
+			.vsel_reg = PM886_REG_LDO2_VOUT,
+			.vsel_mask = PM886_LDO_VSEL_MASK,
+		},
+		.max_uA = 100000,
+	},
+	{
+		.desc = {
+			.name = "LDO15",
+			.regulators_node = "regulators",
+			.of_match = "ldo15",
+			.ops = &pm886_ldo_ops,
+			.type = REGULATOR_VOLTAGE,
+			.enable_reg = PM886_REG_LDO_EN2,
+			.enable_mask = BIT(6),
+			.volt_table = pm886_ldo_volt_table2,
+			.n_voltages = ARRAY_SIZE(pm886_ldo_volt_table2),
+			.vsel_reg = PM886_REG_LDO15_VOUT,
+			.vsel_mask = PM886_LDO_VSEL_MASK,
+		},
+		.max_uA = 200000,
+	},
+	{
+		.desc = {
+			.name = "buck2",
+			.regulators_node = "regulators",
+			.of_match = "buck2",
+			.ops = &pm886_buck_ops,
+			.type = REGULATOR_VOLTAGE,
+			.n_voltages = 115,
+			.linear_ranges = pm886_buck_volt_ranges2,
+			.n_linear_ranges = ARRAY_SIZE(pm886_buck_volt_ranges2),
+			.vsel_reg = PM886_REG_BUCK2_VOUT,
+			.vsel_mask = PM886_BUCK_VSEL_MASK,
+			.enable_reg = PM886_REG_BUCK_EN,
+			.enable_mask = BIT(1),
+		},
+		.max_uA = 1200000,
+	},
+};
+
+static int pm886_regulator_probe(struct platform_device *pdev)
+{
+	struct pm886_chip *chip = dev_get_drvdata(pdev->dev.parent);
+	struct regulator_config rcfg = { };
+	struct pm886_regulator *regulator;
+	struct device *dev = &pdev->dev;
+	struct regulator_desc *rdesc;
+	struct regulator_dev *rdev;
+	struct i2c_client *page;
+	struct regmap *regmap;
+
+	page = devm_i2c_new_dummy_device(dev, chip->client->adapter,
+			chip->client->addr + PM886_PAGE_OFFSET_REGULATORS);
+	if (IS_ERR(page))
+		return dev_err_probe(dev, PTR_ERR(page),
+				"Failed to initialize regulators client\n");
+
+	regmap = devm_regmap_init_i2c(page, &pm886_i2c_regmap);
+	if (IS_ERR(regmap))
+		return dev_err_probe(dev, PTR_ERR(regmap),
+				"Failed to initialize regulators regmap\n");
+	rcfg.regmap = regmap;
+
+	rcfg.dev = dev->parent;
+
+	for (int i = 0; i < ARRAY_SIZE(pm886_regulators); i++) {
+		regulator = &pm886_regulators[i];
+		rdesc = &regulator->desc;
+		rcfg.driver_data = regulator;
+		rdev = devm_regulator_register(dev, rdesc, &rcfg);
+		if (IS_ERR(rdev))
+			return dev_err_probe(dev, PTR_ERR(rdev),
+					"Failed to register %s\n", rdesc->name);
+	}
+
+	return 0;
+}
+
+static const struct platform_device_id pm886_regulator_id_table[] = {
+	{ "88pm886-regulator", },
+	{ }
+};
+MODULE_DEVICE_TABLE(platform, pm886_regulator_id_table);
+
+static struct platform_driver pm886_regulator_driver = {
+	.driver = {
+		.name = "88pm886-regulator",
+	},
+	.probe = pm886_regulator_probe,
+	.id_table = pm886_regulator_id_table,
+};
+module_platform_driver(pm886_regulator_driver);
+
+MODULE_DESCRIPTION("Marvell 88PM886 PMIC regulator driver");
+MODULE_AUTHOR("Karel Balej <balejk@matfyz.cz>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 550145f82726..e8f504d4b9f6 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -91,6 +91,12 @@  config REGULATOR_88PM8607
 	help
 	  This driver supports 88PM8607 voltage regulator chips.
 
+config REGULATOR_88PM886
+	tristate "Marvell 88PM886 voltage regulators"
+	depends on MFD_88PM886_PMIC
+	help
+	  This driver implements support for Marvell 88PM886 voltage regulators.
+
 config REGULATOR_ACT8865
 	tristate "Active-semi act8865 voltage regulator"
 	depends on I2C
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 46fb569e6be8..f30089b74b2e 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -14,6 +14,7 @@  obj-$(CONFIG_REGULATOR_USERSPACE_CONSUMER) += userspace-consumer.o
 obj-$(CONFIG_REGULATOR_88PG86X) += 88pg86x.o
 obj-$(CONFIG_REGULATOR_88PM800) += 88pm800-regulator.o
 obj-$(CONFIG_REGULATOR_88PM8607) += 88pm8607.o
+obj-$(CONFIG_REGULATOR_88PM886) += 88pm886-regulator.o
 obj-$(CONFIG_REGULATOR_CROS_EC) += cros-ec-regulator.o
 obj-$(CONFIG_REGULATOR_CPCAP) += cpcap-regulator.o
 obj-$(CONFIG_REGULATOR_AAT2870) += aat2870-regulator.o