diff mbox series

[v2] HID: nintendo: Don't fail on setting baud rate

Message ID 20240315165729.17817-1-max@enpas.org (mailing list archive)
State New
Delegated to: Jiri Kosina
Headers show
Series [v2] HID: nintendo: Don't fail on setting baud rate | expand

Commit Message

Max Staudt March 15, 2024, 4:57 p.m. UTC
Some third-party controllers can't change the baud rate.

We can still use the gamepad as-is, so let's do that.

Signed-off-by: Max Staudt <max@enpas.org>
---
Changes in v2:
 - Made hid_err() a hid_warn() since it's not a fatal failure.
---
 drivers/hid/hid-nintendo.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

Comments

Jiri Kosina April 3, 2024, 11:39 a.m. UTC | #1
On Sat, 16 Mar 2024, Max Staudt wrote:

> Some third-party controllers can't change the baud rate.
> 
> We can still use the gamepad as-is, so let's do that.
> 
> Signed-off-by: Max Staudt <max@enpas.org>
> ---
> Changes in v2:
>  - Made hid_err() a hid_warn() since it's not a fatal failure.
> ---
>  drivers/hid/hid-nintendo.c | 7 +++++--
>  1 file changed, 5 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/hid/hid-nintendo.c b/drivers/hid/hid-nintendo.c
> index 997c3a1adaca..395ed6b5ef59 100644
> --- a/drivers/hid/hid-nintendo.c
> +++ b/drivers/hid/hid-nintendo.c
> @@ -2164,8 +2164,11 @@ static int joycon_init(struct hid_device *hdev)
>  		/* set baudrate for improved latency */
>  		ret = joycon_send_usb(ctlr, JC_USB_CMD_BAUDRATE_3M, HZ);
>  		if (ret) {
> -			hid_err(hdev, "Failed to set baudrate; ret=%d\n", ret);
> -			goto out_unlock;
> +			/*
> +			 * We can function with the default baudrate.
> +			 * Provide a warning, and continue on.
> +			 */
> +			hid_warn(hdev, "Failed to set baudrate (ret=%d), continuing anyway\n", ret);

Applied, thank you.
diff mbox series

Patch

diff --git a/drivers/hid/hid-nintendo.c b/drivers/hid/hid-nintendo.c
index 997c3a1adaca..395ed6b5ef59 100644
--- a/drivers/hid/hid-nintendo.c
+++ b/drivers/hid/hid-nintendo.c
@@ -2164,8 +2164,11 @@  static int joycon_init(struct hid_device *hdev)
 		/* set baudrate for improved latency */
 		ret = joycon_send_usb(ctlr, JC_USB_CMD_BAUDRATE_3M, HZ);
 		if (ret) {
-			hid_err(hdev, "Failed to set baudrate; ret=%d\n", ret);
-			goto out_unlock;
+			/*
+			 * We can function with the default baudrate.
+			 * Provide a warning, and continue on.
+			 */
+			hid_warn(hdev, "Failed to set baudrate (ret=%d), continuing anyway\n", ret);
 		}
 		/* handshake */
 		ret = joycon_send_usb(ctlr, JC_USB_CMD_HANDSHAKE, HZ);