| Message ID | 20240517092732.47715-2-kuzhylol@gmail.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | [1/2] input: add driver for Hynitron CST816X touchscreen | expand |
On 17/05/2024 11:27, Oleh Kuzhylnyi wrote: > Add documentation for the Hynitron CST816X touchscreen bindings. Please use scripts/get_maintainers.pl to get a list of necessary people and lists to CC. It might happen, that command when run on an older kernel, gives you outdated entries. Therefore please be sure you base your patches on recent Linux kernel. Tools like b4 or scripts/get_maintainer.pl provide you proper list of people, so fix your workflow. Tools might also fail if you work on some ancient tree (don't, instead use mainline), work on fork of kernel (don't, instead use mainline) or you ignore some maintainers (really don't). Just use b4 and everything should be fine, although remember about `b4 prep --auto-to-cc` if you added new patches to the patchset. You missed at least devicetree list (maybe more), so this won't be tested by automated tooling. Performing review on untested code might be a waste of time, thus I will skip this patch entirely till you follow the process allowing the patch to be tested. Please kindly resend and include all necessary To/Cc entries. Also incorrect order - bindings come before users. ... > + > +examples: > + - | > + #include <dt-bindings/gpio/gpio.h> > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + i2c { > + #address-cells = <1>; > + #size-cells = <0>; > + cst816s: cst816s@15 { Node names should be generic. See also an explanation and list of examples (not exhaustive) in DT specification: https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation > + compatible = "hynitron,cst816s"; > + reg = <0x15>; > + interrupt-parent = <&gpio>; > + interrupts = <4 1>; Use proper defines. Why did you include headers if you are not using them? > + reset-gpios = <&gpio 17 0>; Same question. > + status="okay"; Drop. > + }; > + }; > + > +... Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/input/touchscreen/hynitron,cst816x.yaml b/Documentation/devicetree/bindings/input/touchscreen/hynitron,cst816x.yaml new file mode 100644 index 000000000000..b08e907ee672 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/hynitron,cst816x.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/hynitron,cst816x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Hynitron CST816X series touchscreen controller + +description: | + Bindings for Hynitron CST816X series touchscreen controllers. + +maintainers: + - Oleh Kuzhylnyi <kuzhylol@gmail.com> + +allOf: + - $ref: touchscreen.yaml# + +properties: + compatible: + enum: + - hynitron,cst816s + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - reset-gpios + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + cst816s: cst816s@15 { + compatible = "hynitron,cst816s"; + reg = <0x15>; + interrupt-parent = <&gpio>; + interrupts = <4 1>; + reset-gpios = <&gpio 17 0>; + status="okay"; + }; + }; + +...
Add documentation for the Hynitron CST816X touchscreen bindings. Signed-off-by: Oleh Kuzhylnyi <kuzhylol@gmail.com> --- .../input/touchscreen/hynitron,cst816x.yaml | 57 +++++++++++++++++++ 1 file changed, 57 insertions(+) create mode 100644 Documentation/devicetree/bindings/input/touchscreen/hynitron,cst816x.yaml