@@ -7,26 +7,277 @@
#include <linux/stringify.h>
/*
- * The hypercall definitions differ in the low word of the %edx argument
- * in the following way: the old port base interface uses the port
- * number to distinguish between high- and low bandwidth versions.
+ * VMware hypercall ABI.
+ *
+ * - Low bandwidth (LB) hypercalls (I/O port based, vmcall and vmmcall)
+ * have up to 6 input and 6 output arguments passed and returned using
+ * registers: %eax (arg0), %ebx (arg1), %ecx (arg2), %edx (arg3),
+ * %esi (arg4), %edi (arg5).
+ * The following input arguments must be initialized by the caller:
+ * arg0 - VMWARE_HYPERVISOR_MAGIC
+ * arg2 - Hypercall command
+ * arg3 bits [15:0] - Port number, LB and direction flags
+ *
+ * - High bandwidth (HB) hypercalls are I/O port based only. They have
+ * up to 7 input and 7 output arguments passed and returned using
+ * registers: %eax (arg0), %ebx (arg1), %ecx (arg2), %edx (arg3),
+ * %esi (arg4), %edi (arg5), %ebp (arg6).
+ * The following input arguments must be initialized by the caller:
+ * arg0 - VMWARE_HYPERVISOR_MAGIC
+ * arg1 - Hypercall command
+ * arg3 bits [15:0] - Port number, HB and direction flags
+ *
+ * For compatibility purposes, x86_64 systems use only lower 32 bits
+ * for input and output arguments.
+ *
+ * The hypercall definitions differ in the low word of the %edx (arg3)
+ * in the following way: the old I/O port based interface uses the port
+ * number to distinguish between high- and low bandwidth versions, and
+ * uses IN/OUT instructions to define transfer direction.
*
* The new vmcall interface instead uses a set of flags to select
* bandwidth mode and transfer direction. The flags should be loaded
- * into %dx by any user and are automatically replaced by the port
- * number if the VMWARE_HYPERVISOR_PORT method is used.
- *
- * In short, new driver code should strictly use the new definition of
- * %dx content.
+ * into arg3 by any user and are automatically replaced by the port
+ * number if the I/O port method is used.
+ */
+
+#define VMWARE_HYPERVISOR_HB BIT(0)
+#define VMWARE_HYPERVISOR_OUT BIT(1)
+
+#define VMWARE_HYPERVISOR_PORT 0x5658
+#define VMWARE_HYPERVISOR_PORT_HB (VMWARE_HYPERVISOR_PORT | \
+ VMWARE_HYPERVISOR_HB)
+
+#define VMWARE_HYPERVISOR_MAGIC 0x564d5868U
+
+#define VMWARE_CMD_GETVERSION 10
+#define VMWARE_CMD_GETHZ 45
+#define VMWARE_CMD_GETVCPU_INFO 68
+#define VMWARE_CMD_STEALCLOCK 91
+
+#define CPUID_VMWARE_FEATURES_ECX_VMMCALL BIT(0)
+#define CPUID_VMWARE_FEATURES_ECX_VMCALL BIT(1)
+
+extern unsigned long vmware_hypercall_slow(unsigned long cmd,
+ unsigned long in1, unsigned long in3,
+ unsigned long in4, unsigned long in5,
+ u32 *out1, u32 *out2, u32 *out3,
+ u32 *out4, u32 *out5);
+
+/*
+ * The low bandwidth call. The low word of %edx is presumed to have OUT bit
+ * set. The high word of %edx may contain input data from the caller.
*/
+#define VMWARE_HYPERCALL \
+ ALTERNATIVE_2("movw %[port], %%dx\n\t" \
+ "inl (%%dx), %%eax", \
+ "vmcall", X86_FEATURE_VMCALL, \
+ "vmmcall", X86_FEATURE_VMW_VMMCALL)
+
+static inline
+unsigned long vmware_hypercall1(unsigned long cmd, unsigned long in1)
+{
+ unsigned long out0;
+
+ if (unlikely(!alternatives_patched) && !__is_defined(MODULE))
+ return vmware_hypercall_slow(cmd, in1, 0, 0, 0,
+ NULL, NULL, NULL, NULL, NULL);
+
+ asm_inline volatile (VMWARE_HYPERCALL
+ : "=a" (out0)
+ : [port] "i" (VMWARE_HYPERVISOR_PORT),
+ "a" (VMWARE_HYPERVISOR_MAGIC),
+ "b" (in1),
+ "c" (cmd),
+ "d" (0)
+ : "cc", "memory");
+ return out0;
+}
+
+static inline
+unsigned long vmware_hypercall3(unsigned long cmd, unsigned long in1,
+ u32 *out1, u32 *out2)
+{
+ unsigned long out0;
+
+ if (unlikely(!alternatives_patched) && !__is_defined(MODULE))
+ return vmware_hypercall_slow(cmd, in1, 0, 0, 0,
+ out1, out2, NULL, NULL, NULL);
+
+ asm_inline volatile (VMWARE_HYPERCALL
+ : "=a" (out0), "=b" (*out1), "=c" (*out2)
+ : [port] "i" (VMWARE_HYPERVISOR_PORT),
+ "a" (VMWARE_HYPERVISOR_MAGIC),
+ "b" (in1),
+ "c" (cmd),
+ "d" (0)
+ : "cc", "memory");
+ return out0;
+}
+
+static inline
+unsigned long vmware_hypercall4(unsigned long cmd, unsigned long in1,
+ u32 *out1, u32 *out2, u32 *out3)
+{
+ unsigned long out0;
+
+ if (unlikely(!alternatives_patched) && !__is_defined(MODULE))
+ return vmware_hypercall_slow(cmd, in1, 0, 0, 0,
+ out1, out2, out3, NULL, NULL);
+
+ asm_inline volatile (VMWARE_HYPERCALL
+ : "=a" (out0), "=b" (*out1), "=c" (*out2), "=d" (*out3)
+ : [port] "i" (VMWARE_HYPERVISOR_PORT),
+ "a" (VMWARE_HYPERVISOR_MAGIC),
+ "b" (in1),
+ "c" (cmd),
+ "d" (0)
+ : "cc", "memory");
+ return out0;
+}
+
+static inline
+unsigned long vmware_hypercall5(unsigned long cmd, unsigned long in1,
+ unsigned long in3, unsigned long in4,
+ unsigned long in5, u32 *out2)
+{
+ unsigned long out0;
+
+ if (unlikely(!alternatives_patched) && !__is_defined(MODULE))
+ return vmware_hypercall_slow(cmd, in1, in3, in4, in5,
+ NULL, out2, NULL, NULL, NULL);
+
+ asm_inline volatile (VMWARE_HYPERCALL
+ : "=a" (out0), "=c" (*out2)
+ : [port] "i" (VMWARE_HYPERVISOR_PORT),
+ "a" (VMWARE_HYPERVISOR_MAGIC),
+ "b" (in1),
+ "c" (cmd),
+ "d" (in3),
+ "S" (in4),
+ "D" (in5)
+ : "cc", "memory");
+ return out0;
+}
+
+static inline
+unsigned long vmware_hypercall6(unsigned long cmd, unsigned long in1,
+ unsigned long in3, u32 *out2,
+ u32 *out3, u32 *out4, u32 *out5)
+{
+ unsigned long out0;
+
+ if (unlikely(!alternatives_patched) && !__is_defined(MODULE))
+ return vmware_hypercall_slow(cmd, in1, in3, 0, 0,
+ NULL, out2, out3, out4, out5);
+
+ asm_inline volatile (VMWARE_HYPERCALL
+ : "=a" (out0), "=c" (*out2), "=d" (*out3), "=S" (*out4),
+ "=D" (*out5)
+ : [port] "i" (VMWARE_HYPERVISOR_PORT),
+ "a" (VMWARE_HYPERVISOR_MAGIC),
+ "b" (in1),
+ "c" (cmd),
+ "d" (in3)
+ : "cc", "memory");
+ return out0;
+}
+
+static inline
+unsigned long vmware_hypercall7(unsigned long cmd, unsigned long in1,
+ unsigned long in3, unsigned long in4,
+ unsigned long in5, u32 *out1,
+ u32 *out2, u32 *out3)
+{
+ unsigned long out0;
+
+ if (unlikely(!alternatives_patched) && !__is_defined(MODULE))
+ return vmware_hypercall_slow(cmd, in1, in3, in4, in5,
+ out1, out2, out3, NULL, NULL);
+
+ asm_inline volatile (VMWARE_HYPERCALL
+ : "=a" (out0), "=b" (*out1), "=c" (*out2), "=d" (*out3)
+ : [port] "i" (VMWARE_HYPERVISOR_PORT),
+ "a" (VMWARE_HYPERVISOR_MAGIC),
+ "b" (in1),
+ "c" (cmd),
+ "d" (in3),
+ "S" (in4),
+ "D" (in5)
+ : "cc", "memory");
+ return out0;
+}
+
+#ifdef CONFIG_X86_64
+#define VMW_BP_CONSTRAINT "r"
+#else
+#define VMW_BP_CONSTRAINT "m"
+#endif
+
+/*
+ * High bandwidth calls are not supported on encrypted memory guests.
+ * The caller should check cc_platform_has(CC_ATTR_MEM_ENCRYPT) and use
+ * low bandwidth hypercall if memory encryption is set.
+ * This assumption simplifies HB hypercall implementation to just I/O port
+ * based approach without alternative patching.
+ */
+static inline
+unsigned long vmware_hypercall_hb_out(unsigned long cmd, unsigned long in2,
+ unsigned long in3, unsigned long in4,
+ unsigned long in5, unsigned long in6,
+ u32 *out1)
+{
+ unsigned long out0;
+
+ asm_inline volatile (
+ UNWIND_HINT_SAVE
+ "push %%" _ASM_BP "\n\t"
+ UNWIND_HINT_UNDEFINED
+ "mov %[in6], %%" _ASM_BP "\n\t"
+ "rep outsb\n\t"
+ "pop %%" _ASM_BP "\n\t"
+ UNWIND_HINT_RESTORE
+ : "=a" (out0), "=b" (*out1)
+ : "a" (VMWARE_HYPERVISOR_MAGIC),
+ "b" (cmd),
+ "c" (in2),
+ "d" (in3 | VMWARE_HYPERVISOR_PORT_HB),
+ "S" (in4),
+ "D" (in5),
+ [in6] VMW_BP_CONSTRAINT (in6)
+ : "cc", "memory");
+ return out0;
+}
-/* Old port-based version */
-#define VMWARE_HYPERVISOR_PORT 0x5658
-#define VMWARE_HYPERVISOR_PORT_HB 0x5659
+static inline
+unsigned long vmware_hypercall_hb_in(unsigned long cmd, unsigned long in2,
+ unsigned long in3, unsigned long in4,
+ unsigned long in5, unsigned long in6,
+ u32 *out1)
+{
+ unsigned long out0;
-/* Current vmcall / vmmcall version */
-#define VMWARE_HYPERVISOR_HB BIT(0)
-#define VMWARE_HYPERVISOR_OUT BIT(1)
+ asm_inline volatile (
+ UNWIND_HINT_SAVE
+ "push %%" _ASM_BP "\n\t"
+ UNWIND_HINT_UNDEFINED
+ "mov %[in6], %%" _ASM_BP "\n\t"
+ "rep insb\n\t"
+ "pop %%" _ASM_BP "\n\t"
+ UNWIND_HINT_RESTORE
+ : "=a" (out0), "=b" (*out1)
+ : "a" (VMWARE_HYPERVISOR_MAGIC),
+ "b" (cmd),
+ "c" (in2),
+ "d" (in3 | VMWARE_HYPERVISOR_PORT_HB),
+ "S" (in4),
+ "D" (in5),
+ [in6] VMW_BP_CONSTRAINT (in6)
+ : "cc", "memory");
+ return out0;
+}
+#undef VMW_BP_CONSTRAINT
+#undef VMWARE_HYPERCALL
/* The low bandwidth call. The low word of edx is presumed clear. */
#define VMWARE_HYPERCALL \
@@ -41,17 +41,9 @@
#define CPUID_VMWARE_INFO_LEAF 0x40000000
#define CPUID_VMWARE_FEATURES_LEAF 0x40000010
-#define CPUID_VMWARE_FEATURES_ECX_VMMCALL BIT(0)
-#define CPUID_VMWARE_FEATURES_ECX_VMCALL BIT(1)
-#define VMWARE_HYPERVISOR_MAGIC 0x564D5868
-
-#define VMWARE_CMD_GETVERSION 10
-#define VMWARE_CMD_GETHZ 45
-#define VMWARE_CMD_GETVCPU_INFO 68
#define VMWARE_CMD_LEGACY_X2APIC 3
#define VMWARE_CMD_VCPU_RESERVED 31
-#define VMWARE_CMD_STEALCLOCK 91
#define STEALCLOCK_NOT_AVAILABLE (-1)
#define STEALCLOCK_DISABLED 0
@@ -110,6 +102,56 @@ struct vmware_steal_time {
static unsigned long vmware_tsc_khz __ro_after_init;
static u8 vmware_hypercall_mode __ro_after_init;
+unsigned long vmware_hypercall_slow(unsigned long cmd,
+ unsigned long in1, unsigned long in3,
+ unsigned long in4, unsigned long in5,
+ u32 *out1, u32 *out2, u32 *out3,
+ u32 *out4, u32 *out5)
+{
+ unsigned long out0;
+
+ switch (vmware_hypercall_mode) {
+ case CPUID_VMWARE_FEATURES_ECX_VMCALL:
+ asm_inline volatile ("vmcall"
+ : "=a" (out0), "=b" (*out1), "=c" (*out2),
+ "=d" (*out3), "=S" (*out4), "=D" (*out5)
+ : "a" (VMWARE_HYPERVISOR_MAGIC),
+ "b" (in1),
+ "c" (cmd),
+ "d" (in3),
+ "S" (in4),
+ "D" (in5)
+ : "cc", "memory");
+ break;
+ case CPUID_VMWARE_FEATURES_ECX_VMMCALL:
+ asm_inline volatile ("vmmcall"
+ : "=a" (out0), "=b" (*out1), "=c" (*out2),
+ "=d" (*out3), "=S" (*out4), "=D" (*out5)
+ : "a" (VMWARE_HYPERVISOR_MAGIC),
+ "b" (in1),
+ "c" (cmd),
+ "d" (in3),
+ "S" (in4),
+ "D" (in5)
+ : "cc", "memory");
+ break;
+ default:
+ asm_inline volatile ("movw %[port], %%dx; inl (%%dx), %%eax"
+ : "=a" (out0), "=b" (*out1), "=c" (*out2),
+ "=d" (*out3), "=S" (*out4), "=D" (*out5)
+ : [port] "i" (VMWARE_HYPERVISOR_PORT),
+ "a" (VMWARE_HYPERVISOR_MAGIC),
+ "b" (in1),
+ "c" (cmd),
+ "d" (in3),
+ "S" (in4),
+ "D" (in5)
+ : "cc", "memory");
+ break;
+ }
+ return out0;
+}
+
static inline int __vmware_platform(void)
{
uint32_t eax, ebx, ecx, edx;
Introduce vmware_hypercall family of functions. It is a common implementation to be used by the VMware guest code and virtual device drivers in architecture independent manner. The API consists of vmware_hypercallX and vmware_hypercall_hb_{out,in} set of functions by analogy with KVM hypercall API. Architecture specific implementation is hidden inside. It will simplify future enhancements in VMware hypercalls such as SEV-ES and TDX related changes without needs to modify a caller in device drivers code. Current implementation extends an idea from commit bac7b4e84323 ("x86/vmware: Update platform detection code for VMCALL/VMMCALL hypercalls") to have a slow, but safe path vmware_hypercall_slow() earlier during the boot when alternatives are not yet applied. The code inherits VMWARE_CMD logic from the commit mentioned above. Move common macros from vmware.c to vmware.h. Signed-off-by: Alexey Makhalov <alexey.makhalov@broadcom.com> --- arch/x86/include/asm/vmware.h | 279 ++++++++++++++++++++++++++++++++-- arch/x86/kernel/cpu/vmware.c | 58 ++++++- 2 files changed, 315 insertions(+), 22 deletions(-)