From patchwork Fri Jun 21 07:04:36 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "Peng Fan (OSS)" X-Patchwork-Id: 13706908 Received: from EUR05-AM6-obe.outbound.protection.outlook.com (mail-am6eur05on2087.outbound.protection.outlook.com [40.107.22.87]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 7E28F16ABF3; Fri, 21 Jun 2024 06:55:47 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=fail smtp.client-ip=40.107.22.87 ARC-Seal: i=2; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1718952951; cv=fail; b=ghFPEwxfSvNljFcD3X4IgqqmvHcY8CN5l6RnazyuiF33Bbyzds1McxqX6YhWVbKE6hQl/F8a/uv59P7+hYgpVVPvROifNpVVj3mRWEOR4+rvVTMLa8tSi2fgBBjrr7ENyVptXo6EeFIJ0sUPiNBeF2Jl5auPuLVYHHxMfOXSGWA= ARC-Message-Signature: i=2; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1718952951; c=relaxed/simple; bh=3bB969yPOcno3ecKlf2KwrutqmA9MAaa51lLGASMl1U=; h=From:Date:Subject:Content-Type:Message-Id:References:In-Reply-To: To:Cc:MIME-Version; b=om82GdiKUTa5UP5CmH/vSviD6GLqEZVl+dxl091w47EYZjFLPpRbu2nhhiFoyYbEeLSOrSP6jvpDZ81M69T/VcXPwS2vil7+Ya+RdmDaLgMgO3TNfumU7HFGwy26DiJdKnMd3/Am1IlTRGHi7tEudUYTJACxJjrsi2fSQ3yQJ8s= ARC-Authentication-Results: i=2; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=oss.nxp.com; spf=pass smtp.mailfrom=oss.nxp.com; dkim=pass (1024-bit key) header.d=NXP1.onmicrosoft.com header.i=@NXP1.onmicrosoft.com header.b=bhLJt3dc; arc=fail smtp.client-ip=40.107.22.87 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=oss.nxp.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=oss.nxp.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (1024-bit key) header.d=NXP1.onmicrosoft.com header.i=@NXP1.onmicrosoft.com header.b="bhLJt3dc" ARC-Seal: i=1; a=rsa-sha256; s=arcselector9901; d=microsoft.com; cv=none; b=cY4q9Tme2fIgmoCFQ0DjD4BJVYXjp62TpQH/wTic8P5HDF4GEH4hosBZa/f0g3k1Q78ISFVX0uldC6e/yf+9/j+dRvOcdT1DNZXLdSIHjJK8drqlA1jhwhCCVHlSUwD02aylBq3uf1VWjykz1cM6UJiQhS1avVGa24qs6ziG0NJYPB0Uk9t3SibdgJ9qcySCkDSY13dxmeaoS3DtJvHW/QSIbBfdv2DKt4F50LezkIXlvj3Ehgf9lTeNZ08P1Vi6nTvIfLbCDh/sEMY/i8wXwJxQT801UitL+isPYS4vZutgtImK69T0QD5uaXZF/hIROkAeKBx4nvbw//gjEGErjQ== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector9901; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-AntiSpam-MessageData-ChunkCount:X-MS-Exchange-AntiSpam-MessageData-0:X-MS-Exchange-AntiSpam-MessageData-1; bh=jQGLNs4HQnxqPz7/aC1qwqXOzlFqEa+bgEWPkV6CXvA=; b=YmJn26EhmN1c7TQkvYPcUXPhsH/X8nDs+tLeuriftzrPXz6poOPMvXjWIBMp1T9J6y+mtv4rb5qxdwHZQfAN29vQHIkEI+xDA32KsZIEOGu5FZlAzC3ouNH6YHk6NPWZzUca/82PoYWbw5D/cJnkEALkeoG9+DVp6NyRtks6ccMqgMMrShALIjDmFx7fszQc2mF9ZeknVYr84sR95iwYJX8z+aSo+gskIOKrY6AgDssOUhRvgWUgjxpt1hn7XLOmCST+8bRPInw5C2VJ8PCZ7O5UwditMoEmIrEtsF7OISy7gdbLSS2xlOmmLwM8y3zzWmthKms/sOOv3FrYHBRY5w== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=pass smtp.mailfrom=oss.nxp.com; dmarc=pass action=none header.from=oss.nxp.com; dkim=pass header.d=oss.nxp.com; arc=none DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=NXP1.onmicrosoft.com; s=selector2-NXP1-onmicrosoft-com; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=jQGLNs4HQnxqPz7/aC1qwqXOzlFqEa+bgEWPkV6CXvA=; b=bhLJt3dc4JhdZsulSRK3K9oquZDSp/OTROUYnDn0A+IIJgzrjVOFo11pec82qmuzUgoN8QA0N0RCzfhHmzNYuk5OHhuH1CNsQfBPZWBoUoFn9WwQFruGpXFp+fUmS7RlqRNxakzCN8EUGX81+CQ/WHwYN7g4h28WMNYJXj4vQZI= Authentication-Results: dkim=none (message not signed) header.d=none;dmarc=none action=none header.from=oss.nxp.com; Received: from AM6PR04MB5941.eurprd04.prod.outlook.com (2603:10a6:20b:9e::16) by GV1PR04MB10426.eurprd04.prod.outlook.com (2603:10a6:150:1cc::21) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.7698.19; Fri, 21 Jun 2024 06:55:43 +0000 Received: from AM6PR04MB5941.eurprd04.prod.outlook.com ([fe80::9f4e:b695:f5f0:5256]) by AM6PR04MB5941.eurprd04.prod.outlook.com ([fe80::9f4e:b695:f5f0:5256%4]) with mapi id 15.20.7698.017; Fri, 21 Jun 2024 06:55:43 +0000 From: "Peng Fan (OSS)" Date: Fri, 21 Jun 2024 15:04:36 +0800 Subject: [PATCH v5 1/7] Documentation: firmware-guide: add NXP i.MX95 SCMI documentation Message-Id: <20240621-imx95-bbm-misc-v2-v5-1-b85a6bf778cb@nxp.com> References: <20240621-imx95-bbm-misc-v2-v5-0-b85a6bf778cb@nxp.com> In-Reply-To: <20240621-imx95-bbm-misc-v2-v5-0-b85a6bf778cb@nxp.com> To: Jonathan Corbet , Shawn Guo , Sascha Hauer , Pengutronix Kernel Team , Fabio Estevam , Sudeep Holla , Cristian Marussi , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Peng Fan , Alexandre Belloni , Dmitry Torokhov Cc: linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org, imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, arm-scmi@vger.kernel.org, linux-rtc@vger.kernel.org, linux-input@vger.kernel.org X-Mailer: b4 0.12.3 X-Developer-Signature: v=1; a=ed25519-sha256; t=1718953487; l=56444; i=peng.fan@nxp.com; s=20230812; h=from:subject:message-id; bh=ilYt43w3dYjk0YVi2cKAhfSqVWMt8gQT2yqQJN+Lc+8=; b=n+EtoWnQ3X9P9yGTEqGHEPCgzd+McAVU7MRmYaJojZxYQeNbCc+XnW7R87NoQfFIr+88poPdX q1mb0NofSSKAZkV4148v+VJ9sJXH2dd38X//+NHbtoMqSujAGb7ME2H X-Developer-Key: i=peng.fan@nxp.com; a=ed25519; pk=I4sJg7atIT1g63H7bb5lDRGR2gJW14RKDD0wFL8TT1g= X-ClientProxiedBy: SG2PR01CA0122.apcprd01.prod.exchangelabs.com (2603:1096:4:40::26) To AM6PR04MB5941.eurprd04.prod.outlook.com (2603:10a6:20b:9e::16) Precedence: bulk X-Mailing-List: linux-input@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-MS-Exchange-MessageSentRepresentingType: 1 X-MS-PublicTrafficType: Email X-MS-TrafficTypeDiagnostic: AM6PR04MB5941:EE_|GV1PR04MB10426:EE_ X-MS-Office365-Filtering-Correlation-Id: 8d2ec44b-1632-4eee-f5f0-08dc91bf2b67 X-MS-Exchange-SharedMailbox-RoutingAgent-Processed: True X-MS-Exchange-SenderADCheck: 1 X-MS-Exchange-AntiSpam-Relay: 0 X-Microsoft-Antispam: BCL:0;ARA:13230037|1800799021|366013|52116011|7416011|376011|921017|38350700011; X-Microsoft-Antispam-Message-Info: =?utf-8?q?3KNPamTFn0njbE22bIg3Job9SO9w9I9?= =?utf-8?q?fQlLjKt7H9oJe5HbDGv25bVtcRQeOAt2JBOWWE624ZHayyvWaCFGG6r9H/Wu+5Xpo?= =?utf-8?q?Bp74yLp7gHlAYJxcJ2QZEs8g4XIWkP4mI4l2bHfnsC5nDhgjolEV/yoMjZEnGSExk?= =?utf-8?q?LMJ/nwpY9l6DeRuED6u3Ii1D+vH3BocV69+Ksh5sRfTLvAXWjo0/yxpdzF5zwy4Qj?= =?utf-8?q?VJR9NqtqzkCXAGrh4nJbojluL4Gne701pqAatGvkX+xm9rZgQ7Ej4zK7KvFOrf6+J?= =?utf-8?q?CyMlH3svecXrCSXTnJvzuMh/JonKBAGYR6f759bb8Ck0fz/wb41TxTdsYEvsBhODj?= =?utf-8?q?z27TdxKZw5+9yfF73XTpnzI0y2sxbuKDI6h/uvDzXpeJfcclUdC71IMX74K62zSPo?= =?utf-8?q?WYu95aCIZedfsEoyoXyGYTGEG7SZ3aYQkpFXwYBVD/OQsYfyWLrHs46r4FFXd06gA?= =?utf-8?q?9fyJWzk45xNGTIpjZjgXCnD1E/Tn4URM47GXECK5j7b2jfsNVCKmt5GLGYALGJCJx?= =?utf-8?q?XK9U+R5+USTV9aqCGzGyJcq8c9FjUCTr1cO2yCEIKlHTKIL7ZCVXETH33Xk78/8pR?= =?utf-8?q?UoSAUTCvME+seKNdSC2h5LsmfbE86Dwii7hJa4Xj5iugWJKIdE6VX1gKCxarj10SR?= =?utf-8?q?C+0pZfZsZ/Vok69VrSUPXhzoOap1oHP6DrPeqiX7ICWkRbMqeIHeyNsV3UO1HFWYh?= =?utf-8?q?dNsfMzIRPAv1gl+Sc5RvUFiD9BEOxYRAr6EB/jsTAJOA57FeZK0rc7BvVKUf9vqjj?= =?utf-8?q?TZgL7y/sAtJnEVt2vVetCJFHJ6O1TJkYwXBRl5eZiz7p8IeKJYrA3Un0v/ltyRpBv?= =?utf-8?q?z7qg1WRh0D6mzL0LfFmGIGmHqRo2x3nCStn3bWd9aL1z5p8jimClaFEa3sX/TCz7E?= =?utf-8?q?xbEpK6qa0YoBIMx/oqZtDOCmsyMk9cMqfsjFQFjzBq/bhoWU+OKPpTl9Kjrj9RPBb?= =?utf-8?q?J0ptNypOHQZlSiwBXoX8QNyQNuVbT70qT4/bbn37S6CzUYRav3P+nxFwaNJUph59a?= =?utf-8?q?6wTC5wu1eNPPXqZ4SiGoppj8mbqGJ/x/J6nNZRpoTgQnjGvO9T4leg3OnsH10C88O?= =?utf-8?q?fbvqN+p2WG7xx4mR033ByWIOaSLzkJjyXZLLI6nAKS1y2/Nm9Rspm1pSBO9VYV5cf?= =?utf-8?q?sJUDh+6a0WbIDvLWaxlIZ+0LbHCSlLHFvGho7YI9PovQrtWSIsBz/v8p7tgBVA6EX?= =?utf-8?q?XaD0RIAEZS2JCk3+W2MkOdc+YgPsnGIY/NivWQ7n053TN+s9p1JPd6+XfkBcnoRKW?= =?utf-8?q?fH3M9K4WtPdL0Gf9FXXUzbPPTxvvafzwPbsTSqiXlnusrUnCthe5fnkWw/qj8EaKd?= =?utf-8?q?2n0iP71sLDAF?= X-Forefront-Antispam-Report: CIP:255.255.255.255;CTRY:;LANG:en;SCL:1;SRV:;IPV:NLI;SFV:NSPM;H:AM6PR04MB5941.eurprd04.prod.outlook.com;PTR:;CAT:NONE;SFS:(13230037)(1800799021)(366013)(52116011)(7416011)(376011)(921017)(38350700011);DIR:OUT;SFP:1101; X-MS-Exchange-AntiSpam-MessageData-ChunkCount: 1 X-MS-Exchange-AntiSpam-MessageData-0: =?utf-8?q?9qNfPW45CPo+iIp0ql1O2gnN5+SS?= =?utf-8?q?Ibw6mmNfROSXFLjLF9tH7Z+/bPcdyzYCeEK4HTbhVV05M50juW9q51Z/5t+ImCLYj?= =?utf-8?q?kRc7tlft/k+qbd32xbTpnX4O1LmaDxdykV/KtsYVi0ZtfGSomccVHhzo64Y9ypSGM?= =?utf-8?q?QwnuFFBmtTKsPJj/9Htv/DR17UrzcH9OAJAMf336qEtV14moHYMvf0T9+ohnTxEx3?= =?utf-8?q?u52w2SvzUoKDus3fVXqRb5Bydc9qnzbkn41kF1OpKM2SkKZxCME36WwL4CTWTl3Bn?= =?utf-8?q?TWHejic8oKvOQokomKXlC6G3tGImMcIGgD1y62ZE85EQNMV9zq800nXjSIHa8uS1y?= =?utf-8?q?rCZlOiPn1rAtR6rIJlM7Psj3UClCYqWEustwcJBEhVVg1CqmIWVuuTBv2kj7QfsZO?= =?utf-8?q?yYTcr/Wh53jJDI0t2EucPbnmtn+W02OlYeKXLevf8KVvmFkcnYVR2fjq9ZdxsIp86?= =?utf-8?q?AcWI3dESl7RkXWoTy9NV6TFdF1YNt6h2Y5zO5D8T/nQaFajqMWRKPU4kB86o8kIYu?= =?utf-8?q?du7ZPfFvA5s1EhA+uQ3nneFw8Y3celGkyD5GQGGhpoQdE70XESVah3wsh93Os3F7Y?= =?utf-8?q?QdtuXSEmphaurh3Sh1lPw6BbR/uhFGTzZAq5Vukm/wrrbMmNEzSrRlGeIgRrQ5lr+?= =?utf-8?q?Z1qkireZ0GQ26lfqDzeE4MrOQutbZczjPPqgN9xTsNYhfidgtpxoTEydT2E/0Dz4b?= =?utf-8?q?BKJrlmATvxsduogT5Hu4HpV4wEOvpWBVjg0L1FyVR9NwM2b9hB4MCzFscpdSnv0rR?= =?utf-8?q?c/y0ixIH8jwCmZmXwE1KnO+1xa7QDDxP18LEJMhBg0f+U1OTVOnlEghJtJM12yK0i?= =?utf-8?q?a0WAx0LZW1skh43mhbUbX8pc+Y5gMhTU9blNXuhkFpRCwi/egZDC80z5Xkzlh+7Wl?= =?utf-8?q?H/kAPCuUnvyLtdycBs3MD8M9cjt8xr+Lxk54wAd7qqvLt4OHWIcWtu7Sebh8SXFex?= =?utf-8?q?4iLy/vMQbqbThqtC9o38FFRCCftAhDR5rBv0OXYq81th8pvP2V4x5FfNBGzVjx0R1?= =?utf-8?q?q/VRh7zbV8mDnrke5KT8tLvrxtKmsb4iWejKsEtWh5dWDNkoAULCJMFWmu/iZTrX1?= =?utf-8?q?mcAYN8pVwxxJ6tTFsOeLj034J8+3jHSKhhPfvNjoqSs8PT8do9S+X3wRL3HO3cKhy?= =?utf-8?q?gNEDMqVC63mDQbf/wAMnc+0LHY4Ol+QRr2xFepdxTYVsB+khI6QdHxr29RsVl01i+?= =?utf-8?q?CGE3fEt1tpaCT/g9lwDpWoNa30xkCtwEUzwE5u3BdCBj+T/OyvVaSIeRHL3P0tkg0?= =?utf-8?q?aF70ddFp6REjWPMZUSKtPSMTl7Eu75ViqDSN7sZgPdhH3sjh3wCdumeRqO0vJAAa3?= =?utf-8?q?l9WQIAwWFR9YjT0csLBShxbktm8wgdTZQGkuhT0+zzD9ONXwFoJTnSmrXeYDtWCpW?= =?utf-8?q?xdMQpAPKJcHanbslu5DZphj77WmsowhdTfDCJ6SFW9EH3N//pqn/iM7L53ziCCKwV?= =?utf-8?q?S8sVtnZ9xZgLwKIXycxY+n4MI2gyXXaMk4q0OToW5GB4IfIthOUlT79xn/giG2LBO?= =?utf-8?q?akk86i2srKS3?= X-OriginatorOrg: oss.nxp.com X-MS-Exchange-CrossTenant-Network-Message-Id: 8d2ec44b-1632-4eee-f5f0-08dc91bf2b67 X-MS-Exchange-CrossTenant-AuthSource: AM6PR04MB5941.eurprd04.prod.outlook.com X-MS-Exchange-CrossTenant-AuthAs: Internal X-MS-Exchange-CrossTenant-OriginalArrivalTime: 21 Jun 2024 06:55:43.8379 (UTC) X-MS-Exchange-CrossTenant-FromEntityHeader: Hosted X-MS-Exchange-CrossTenant-Id: 686ea1d3-bc2b-4c6f-a92c-d99c5c301635 X-MS-Exchange-CrossTenant-MailboxType: HOSTED X-MS-Exchange-CrossTenant-UserPrincipalName: UNkic7TaWjIGcwYkaip2z9r28NnZNMY6XzdqWpeiesFtLhqGTpQ5IP4XwgnX9kWDPiPQ+NoOs1QP7L6E83hFow== X-MS-Exchange-Transport-CrossTenantHeadersStamped: GV1PR04MB10426 From: Peng Fan Add NXP i.MX95 System Control Management Interface(SCMI) vendor extensions protocol documentation. Signed-off-by: Peng Fan --- Documentation/firmware-guide/index.rst | 10 + Documentation/firmware-guide/nxp/imx95-scmi.rst | 887 ++++++++++++++++++++++++ Documentation/firmware-guide/nxp/index.rst | 10 + 3 files changed, 907 insertions(+) diff --git a/Documentation/firmware-guide/index.rst b/Documentation/firmware-guide/index.rst index 5355784ca0a2..8f66ae31337e 100644 --- a/Documentation/firmware-guide/index.rst +++ b/Documentation/firmware-guide/index.rst @@ -4,6 +4,9 @@ The Linux kernel firmware guide =============================== +ACPI subsystem +============== + This section describes the ACPI subsystem in Linux from firmware perspective. .. toctree:: @@ -11,3 +14,10 @@ This section describes the ACPI subsystem in Linux from firmware perspective. acpi/index +NXP firmware +============ + +.. toctree:: + :maxdepth: 1 + + nxp/index diff --git a/Documentation/firmware-guide/nxp/imx95-scmi.rst b/Documentation/firmware-guide/nxp/imx95-scmi.rst new file mode 100644 index 000000000000..03ee81978f65 --- /dev/null +++ b/Documentation/firmware-guide/nxp/imx95-scmi.rst @@ -0,0 +1,887 @@ +.. SPDX-License-Identifier: GPL-2.0 +.. include:: + +=============================================================================== +i.MX95 System Control and Management Interface(SCMI) Vendor Protocols Extension +=============================================================================== + +:Copyright: |copy| 2024 NXP + +:Author: Peng Fan + +The System Manager (SM) is a low-level system function which runs on a System +Control Processor (SCP) to support isolation and management of power domains, +clocks, resets, sensors, pins, etc. on complex application processors. It often +runs on a Cortex-M processor and provides an abstraction to many of the +underlying features of the hardware. The primary purpose of the SM is to allow +isolation between software running on different cores in the SoC. It does this +by having exclusive access to critical resources such as those controlling +power, clocks, reset, PMIC, etc. and then providing an RPC interface to those +clients. This allows the SM to provide access control, arbitration, and +aggregation policies for those shared critical resources. + +SM introduces a concept Logic Machine(LM) which is analogous to VM and each has +its own instance of SCMI. All normal SCMI calls only apply to that LM. That +includes boot, shutdown, reset, suspend, wake, etc. Each LM (e.g. A55 and M7) +are completely isolated from the others and each LM has its own communication +channels talking to the same SCMI server. + +This document covers all the information necessary to understand, maintain, +port, and deploy the SM on supported processors. + +The SM implements an interface compliant with the Arm SCMI Specification +with additional vendor specific extensions. + +SCMI_BBM: System Control and Management BBM Vendor Protocol +============================================================== + +This protocol is intended provide access to the battery-backed module. This +contains persistent storage (GPR), an RTC, and the ON/OFF button. The protocol +can also provide access to similar functions implemented via external board +components. The BBM protocol provides functions to: + +- Describe the protocol version. +- Discover implementation attributes. +- Read/write GPR +- Discover the RTCs available in the system. +- Read/write the RTC time in seconds and ticks +- Set an alarm (per LM) in seconds +- Get notifications on RTC update, alarm, or rollover. +- Get notification on ON/OFF button activity. + +For most SoC, there is one on-chip RTC (e.g. in BBNSM) and this is RTC ID 0. +Board code can add additional GPR and RTC. + +GPR are not aggregated. The RTC time is also not aggregated. Setting these +sets for all so normally exclusive access would be granted to one agent for +each. However, RTC alarms are maintained for each LM and the hardware is +programmed with the next nearest alarm time. So only one agent in an LM should +be given access rights to set an RTC alarm. + +Commands: +_________ + +PROTOCOL_VERSION +~~~~~~~~~~~~~~~~ + +message_id: 0x0 +protocol_id: 0x81 + ++---------------+--------------------------------------------------------------+ +|Return values | ++---------------+--------------------------------------------------------------+ +|Name |Description | ++---------------+--------------------------------------------------------------+ +|int32 status | See ARM SCMI Specification for status code definitions. | ++---------------+--------------------------------------------------------------+ +|uint32 version | For this revision of the specification, this value must be | +| | 0x10000. | ++---------------+--------------------------------------------------------------+ + +PROTOCOL_ATTRIBUTES +~~~~~~~~~~~~~~~~~~~ + +message_id: 0x1 +protocol_id: 0x81 + ++---------------+--------------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status | See ARM SCMI Specification for status code definitions. | ++------------------+-----------------------------------------------------------+ +|uint32 attributes | Bits[31:8] Number of RTCs. | +| | Bits[15:0] Number of persistent storage (GPR) words. | ++------------------+-----------------------------------------------------------+ + +PROTOCOL_MESSAGE_ATTRIBUTES +~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +message_id: 0x2 +protocol_id: 0x81 + ++---------------+--------------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: in case the message is implemented and available | +| |to use. | +| |NOT_FOUND: if the message identified by message_id is | +| |invalid or not implemented | ++------------------+-----------------------------------------------------------+ +|uint32 attributes |Flags that are associated with a specific function in the | +| |protocol. For all functions in this protocol, this | +| |parameter has a value of 0 | ++------------------+-----------------------------------------------------------+ + +BBM_GPR_SET +~~~~~~~~~~~ + +message_id: 0x3 +protocol_id: 0x81 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 index |Index of GPR to write | ++------------------+-----------------------------------------------------------+ +|uint32 value |32-bit value to write to the GPR | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: if the GPR was successfully written. | +| |NOT_FOUND: if the index is not valid. | +| |DENIED: if the agent does not have permission to write | +| |the specified GPR | ++------------------+-----------------------------------------------------------+ + +BBM_GPR_GET +~~~~~~~~~~~ + +message_id: 0x4 +protocol_id: 0x81 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 index |Index of GPR to read | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: if the GPR was successfully read. | +| |NOT_FOUND: if the index is not valid. | +| |DENIED: if the agent does not have permission to read | +| |the specified GPR. | ++------------------+-----------------------------------------------------------+ +|uint32 value |32-bit value read from the GPR | ++------------------+-----------------------------------------------------------+ + +BBM_RTC_ATTRIBUTES +~~~~~~~~~~~~~~~~~~ + +message_id: 0x5 +protocol_id: 0x81 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 index |Index of RTC | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: returned the attributes. | +| |NOT_FOUND: Index is invalid. | ++------------------+-----------------------------------------------------------+ +|uint32 attributes |Bit[31:24] Bit width of RTC seconds. | +| |Bit[23:16] Bit width of RTC ticks. | +| |Bits[15:0] RTC ticks per second | ++------------------+-----------------------------------------------------------+ +|uint8 name[16] |Null-terminated ASCII string of up to 16 bytes in length | +| |describing the RTC name | ++------------------+-----------------------------------------------------------+ + +BBM_RTC_TIME_SET +~~~~~~~~~~~~~~~~ + +message_id: 0x6 +protocol_id: 0x81 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 index |Index of RTC | ++------------------+-----------------------------------------------------------+ +|uint32 flags |Bits[31:1] Reserved, must be zero. | +| |Bit[0] RTC time format: | +| |Set to 1 if the time is in ticks. | +| |Set to 0 if the time is in seconds | ++------------------+-----------------------------------------------------------+ +|uint32 time[2] |Lower word: Lower 32 bits of the time in seconds/ticks. | +| |Upper word: Upper 32 bits of the time in seconds/ticks. | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: RTC time was successfully set. | +| |NOT_FOUND: rtcId pertains to a non-existent RTC. | +| |INVALID_PARAMETERS: time is not valid | +| |(beyond the range of the RTC). | +| |DENIED: the agent does not have permission to set the RTC. | ++------------------+-----------------------------------------------------------+ + +BBM_RTC_TIME_GET +~~~~~~~~~~~~~~~~ + +message_id: 0x7 +protocol_id: 0x81 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 index |Index of RTC | ++------------------+-----------------------------------------------------------+ +|uint32 flags |Bits[31:1] Reserved, must be zero. | +| |Bit[0] RTC time format: | +| |Set to 1 if the time is in ticks. | +| |Set to 0 if the time is in seconds | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: RTC time was successfully get. | +| |NOT_FOUND: rtcId pertains to a non-existent RTC. | ++------------------+-----------------------------------------------------------+ +|uint32 time[2] |Lower word: Lower 32 bits of the time in seconds/ticks. | +| |Upper word: Upper 32 bits of the time in seconds/ticks. | ++------------------+-----------------------------------------------------------+ + +BBM_RTC_ALARM_SET +~~~~~~~~~~~~~~~~~ + +message_id: 0x8 +protocol_id: 0x81 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 index |Index of RTC | ++------------------+-----------------------------------------------------------+ +|uint32 flags |Bits[31:1] Reserved, must be zero. | +| |Bit[0] RTC enable flag: | +| |Set to 1 if the RTC alarm should be enabled. | +| |Set to 0 if the RTC alarm should be disabled | ++------------------+-----------------------------------------------------------+ +|uint32 time[2] |Lower word: Lower 32 bits of the time in seconds. | +| |Upper word: Upper 32 bits of the time in seconds. | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: RTC time was successfully set. | +| |NOT_FOUND: rtcId pertains to a non-existent RTC. | +| |INVALID_PARAMETERS: time is not valid | +| |(beyond the range of the RTC). | +| |DENIED: the agent does not have permission to set the RTC | +| |alarm | ++------------------+-----------------------------------------------------------+ + +BBM_BUTTON_GET +~~~~~~~~~~~~~~ + +message_id: 0x9 +protocol_id: 0x81 + ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: if the button status was read. | +| |Other value: ARM SCMI Specification status code definitions| ++------------------+-----------------------------------------------------------+ +|uint32 state |State of the ON/OFF button. 1: ON, 0: OFF | ++------------------+-----------------------------------------------------------+ + +BBM_RTC_NOTIFY +~~~~~~~~~~~~~~ + +message_id: 0xA +protocol_id: 0x81 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 index |Index of RTC | ++------------------+-----------------------------------------------------------+ +|uint32 flags |Notification flags | +| |Bits[31:3] Reserved, must be zero. | +| |Bit[2] Update enable: | +| |Set to 1 to send notification. | +| |Set to 0 if no notification. | +| |Bit[1] Rollover enable: | +| |Set to 1 to send notification. | +| |Set to 0 if no notification. | +| |Bit[0] Alarm enable: | +| |Set to 1 to send notification. | +| |Set to 0 if no notification | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: notification configuration was successfully | +| |updated. | +| |NOT_FOUND: rtcId pertains to a non-existent RTC. | +| |DENIED: the agent does not have permission to request RTC | +| |notifications. | ++------------------+-----------------------------------------------------------+ + +BBM_BUTTON_NOTIFY +~~~~~~~~~~~~~~~~~ + +message_id: 0xB +protocol_id: 0x81 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 flags |Notification flags | +| |Bits[31:1] Reserved, must be zero. | +| |Bit[0] Enable button: | +| |Set to 1 to send notification. | +| |Set to 0 if no notification | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: notification configuration was successfully | +| |updated. | +| |DENIED: the agent does not have permission to request | +| |button notifications. | ++------------------+-----------------------------------------------------------+ + +NEGOTIATE_PROTOCOL_VERSION +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +message_id: 0x10 +protocol_id: 0x81 + ++--------------------+---------------------------------------------------------+ +|Parameters | ++--------------------+---------------------------------------------------------+ +|Name |Description | ++--------------------+---------------------------------------------------------+ +|uint32 version |The negotiated protocol version the agent intends to use | ++--------------------+---------------------------------------------------------+ +|Return values | ++--------------------+---------------------------------------------------------+ +|Name |Description | ++--------------------+---------------------------------------------------------+ +|int32 status |SUCCESS: if the negotiated protocol version is supported | +| |by the platform. All commands, responses, and | +| |notifications post successful return of this command must| +| |comply with the negotiated version. | +| |NOT_SUPPORTED: if the protocol version is not supported. | ++--------------------+---------------------------------------------------------+ + +Notifications +_____________ + +BBM_RTC_EVENT +~~~~~~~~~~~~~ + +message_id: 0x0 +protocol_id: 0x81 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 flags |RTC events: | +| |Bits[31:2] Reserved, must be zero. | +| |Bit[1] RTC rollover notification: | +| |1 RTC rollover detected. | +| |0 no RTC rollover detected. | +| |Bit[0] RTC alarm notification: | +| |1 RTC alarm generated. | +| |0 no RTC alarm generated. | ++------------------+-----------------------------------------------------------+ + +BBM_BUTTON_EVENT +~~~~~~~~~~~~~~~~ + +message_id: 0x1 +protocol_id: 0x81 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 flags |RTC events: | ++------------------+-----------------------------------------------------------+ +| |Button events: | +| |Bits[31:1] Reserved, must be zero. | +| |Bit[0] Button notification: | +| |1 button change detected. | +| |0 no button change detected. | ++------------------+-----------------------------------------------------------+ + +SCMI_MISC: System Control and Management MISC Vendor Protocol +================================================================ + +Provides miscellaneous functions. This includes controls that are miscellaneous +settings/actions that must be exposed from the SM to agents. They are device +specific and are usually define to access bit fields in various mix block +control modules, IOMUX_GPR, and other GPR/CSR owned by the SM. This protocol +supports the following functions: + +- Describe the protocol version. +- Discover implementation attributes. +- Set/Get a control. +- Initiate an action on a control. +- Obtain platform (i.e. SM) build information. +- Obtain ROM passover data. +- Read boot/shutdown/reset information for the LM or the system. + +Commands: +_________ + +PROTOCOL_VERSION +~~~~~~~~~~~~~~~~ + +message_id: 0x0 +protocol_id: 0x84 + ++---------------+--------------------------------------------------------------+ +|Return values | ++---------------+--------------------------------------------------------------+ +|Name |Description | ++---------------+--------------------------------------------------------------+ +|int32 status | See ARM SCMI Specification for status code definitions. | ++---------------+--------------------------------------------------------------+ +|uint32 version | For this revision of the specification, this value must be | +| | 0x10000. | ++---------------+--------------------------------------------------------------+ + +PROTOCOL_ATTRIBUTES +~~~~~~~~~~~~~~~~~~~ + +message_id: 0x1 +protocol_id: 0x84 + ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status | See ARM SCMI Specification for status code definitions. | ++------------------+-----------------------------------------------------------+ +|uint32 attributes |Protocol attributes: | +| |Bits[31:24] Reserved, must be zero. | +| |Bits[23:16] Number of reset reasons. | +| |Bits[15:0] Number of controls | ++------------------+-----------------------------------------------------------+ + +PROTOCOL_MESSAGE_ATTRIBUTES +~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +message_id: 0x2 +protocol_id: 0x84 + ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: in case the message is implemented and available | +| |to use. | +| |NOT_FOUND: if the message identified by message_id is | +| |invalid or not implemented | ++------------------+-----------------------------------------------------------+ +|uint32 attributes |Flags that are associated with a specific function in the | +| |protocol. For all functions in this protocol, this | +| |parameter has a value of 0 | ++------------------+-----------------------------------------------------------+ + +MISC_CONTROL_SET +~~~~~~~~~~~~~~~~ + +message_id: 0x3 +protocol_id: 0x84 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 index |Index of the control | ++------------------+-----------------------------------------------------------+ +|uint32 num |Size of the value data in words | ++------------------+-----------------------------------------------------------+ +|uint32 val[8] |value data array | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: if the control was set successfully. | +| |NOT_FOUND: if the index is not valid. | +| |DENIED: if the agent does not have permission to set the | +| |control | ++------------------+-----------------------------------------------------------+ + +MISC_CONTROL_GET +~~~~~~~~~~~~~~~~ + +message_id: 0x4 +protocol_id: 0x84 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 index |Index of the control | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: if the control was get successfully. | +| |NOT_FOUND: if the index is not valid. | +| |DENIED: if the agent does not have permission to get the | +| |control | ++------------------+-----------------------------------------------------------+ +|uint32 num |Size of the return data in words, max 8 | ++------------------+-----------------------------------------------------------+ +|uint32 | | +|val[0, num - 8] |value data array | ++------------------+-----------------------------------------------------------+ + +MISC_CONTROL_ACTION +~~~~~~~~~~~~~~~~~~~ + +message_id: 0x5 +protocol_id: 0x84 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 index |Index of the control | ++------------------+-----------------------------------------------------------+ +|uint32 action |Action for the control | ++------------------+-----------------------------------------------------------+ +|uint32 numarg |Size of the argument data, max 8 | ++------------------+-----------------------------------------------------------+ +|uint32 | | +|arg[0, numarg -1] |Argument data array | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: if the action was set successfully. | +| |NOT_FOUND: if the index is not valid. | +| |DENIED: if the agent does not have permission to get the | +| |control | ++------------------+-----------------------------------------------------------+ +|uint32 num |Size of the return data in words, max 8 | ++------------------+-----------------------------------------------------------+ +|uint32 | | +|val[0:num-1] |value data array | ++------------------+-----------------------------------------------------------+ + +MISC_DISCOVER_BUILD_INFO +~~~~~~~~~~~~~~~~~~~~~~~~ + +This function is used to obtain the build commit, data, time, number. + +message_id: 0x6 +protocol_id: 0x84 + ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: if the build info was got successfully. | +| |NOT_SUPPORTED: if the data is not available. | ++------------------+-----------------------------------------------------------+ +|uint32 buildnum |Build number | ++------------------+-----------------------------------------------------------+ +|uint32 buildcommit|Most significant 32 bits of the git commit hash | ++------------------+-----------------------------------------------------------+ +|uint8 date[16] |Date of build. Null terminated ASCII string of up to 16 | +| |bytes in length | ++------------------+-----------------------------------------------------------+ +|uint8 time[16] |Time of build. Null terminated ASCII string of up to 16 | +| |bytes in length | ++------------------+-----------------------------------------------------------+ + +MISC_ROM_PASSOVER_GET +~~~~~~~~~~~~~~~~~~~~~ + +ROM passover data is information exported by ROM and could be used by others. +It includes boot device, instance, type, mode and etc. This function is used +to obtain the ROM passover data. The returned block of words is structured as +defined in the ROM passover section in the SoC RM. + +message_id: 0x7 +protocol_id: 0x84 + ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: if the data was got successfully. | +| |NOT_SUPPORTED: if the data is not available. | ++------------------+-----------------------------------------------------------+ +|uint32 num |Size of the passover data in words, max 13 | ++------------------+-----------------------------------------------------------+ +|uint32_t | | +|data[0:num-1] |Passover data array | ++------------------+-----------------------------------------------------------+ + +MISC_CONTROL_NOTIFY +~~~~~~~~~~~~~~~~~~~ + +message_id: 0x8 +protocol_id: 0x84 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 index |Index of control | ++------------------+-----------------------------------------------------------+ +|uint32 flags |Notification flags, varies by control | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: notification configuration was successfully | +| |updated. | +| |NOT_FOUND: control id not exists. | +| |INVALID_PARAMETERS: if the input attributes flag specifies | +| |unsupported or invalid configurations.. | +| |DENIED: if the calling agent is not permitted to request | +| |the notification. | ++------------------+-----------------------------------------------------------+ + +MISC_RESET_REASON_ATTRIBUTES +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +message_id: 0x9 +protocol_id: 0x84 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 reasonid |Identifier for the reason | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: if valid reason attributes are returned | +| |NOT_FOUND: if reasonId pertains to a non-existent reason. | ++------------------+-----------------------------------------------------------+ +|uint32 attributes |Reason attributes. This parameter has the following | +| |format: Bits[31:0] Reserved, must be zero | +| |Bits[15:0] Number of persistent storage (GPR) words. | ++------------------+-----------------------------------------------------------+ +|uint8 name[16] |Null-terminated ASCII string of up to 16 bytes in length | +| |describing the reason | ++------------------+-----------------------------------------------------------+ + +MISC_RESET_REASON_GET +~~~~~~~~~~~~~~~~~~~~~ + +message_id: 0xA +protocol_id: 0x84 + ++--------------------+---------------------------------------------------------+ +|Parameters | ++--------------------+---------------------------------------------------------+ +|Name |Description | ++--------------------+---------------------------------------------------------+ +|uint32 flags |Reason flags. This parameter has the following format: | +| |Bits[31:1] Reserved, must be zero. | +| |Bit[0] System: | +| |Set to 1 to return the system reason. | +| |Set to 0 to return the LM reason | ++--------------------+---------------------------------------------------------+ +|Return values | ++--------------------+---------------------------------------------------------+ +|Name |Description | ++--------------------+---------------------------------------------------------+ +|int32 status |SUCCESS: reset reason return | ++--------------------+---------------------------------------------------------+ +|uint32 bootflags |Boot reason flags. This parameter has the format: | +| |Bits[31] Valid. | +| |Set to 1 if the entire reason is valid. | +| |Set to 0 if the entire reason is not valid. | +| |Bits[30:29] Reserved, must be zero. | +| |Bit[28] Valid origin: | +| |Set to 1 if the origin field is valid. | +| |Set to 0 if the origin field is not valid. | +| |Bits[27:24] Origin. | +| |Bit[23] Valid err ID: | +| |Set to 1 if the error ID field is valid. | +| |Set to 0 if the error ID field is not valid. | +| |Bits[22:8] Error ID. | +| |Bit[7:0] Reason | ++--------------------+---------------------------------------------------------+ +|uint32 shutdownflags|Shutdown reason flags. This parameter has the format: | +| |Bits[31] Valid. | +| |Set to 1 if the entire reason is valid. | +| |Set to 0 if the entire reason is not valid. | +| |Bits[30:29] Number of valid extended info words. | +| |Bit[28] Valid origin: | +| |Set to 1 if the origin field is valid. | +| |Set to 0 if the origin field is not valid. | +| |Bits[27:24] Origin. | +| |Bit[23] Valid err ID: | +| |Set to 1 if the error ID field is valid. | +| |Set to 0 if the error ID field is not valid. | +| |Bits[22:8] Error ID. | +| |Bit[7:0] Reason | ++--------------------+---------------------------------------------------------+ +|uint32 extinfo[8] |Array of extended info words | ++--------------------+---------------------------------------------------------+ + +MISC_SI_INFO_GET +~~~~~~~~~~~~~~~~ + +message_id: 0xB +protocol_id: 0x84 + ++--------------------+---------------------------------------------------------+ +|Return values | ++--------------------+---------------------------------------------------------+ +|Name |Description | ++--------------------+---------------------------------------------------------+ +|int32 status |SUCCESS: silicon info return | ++--------------------+---------------------------------------------------------+ +|uint32 deviceid |Silicon specific device ID | ++--------------------+---------------------------------------------------------+ +|uint32 sirev |Silicon specific revision | ++--------------------+---------------------------------------------------------+ +|uint32 partnum |Silicon specific part number | ++--------------------+---------------------------------------------------------+ +|uint8 siname[16] |Silicon name/revision. Null terminated ASCII string of up| +| |to 16 bytes in length | ++--------------------+---------------------------------------------------------+ + +MISC_CFG_INFO_GET +~~~~~~~~~~~~~~~~~ + +message_id: 0xC +protocol_id: 0x84 + ++--------------------+---------------------------------------------------------+ +|Return values | ++--------------------+---------------------------------------------------------+ +|Name |Description | ++--------------------+---------------------------------------------------------+ +|int32 status |SUCCESS: config name return | +| |NOT_SUPPORTED: name not available | ++--------------------+---------------------------------------------------------+ +|uint32 msel |Mode selector value | ++--------------------+---------------------------------------------------------+ +|uint8 cfgname[16] |config file basename. Null terminated ASCII string of up | +| |to 16 bytes in length | ++--------------------+---------------------------------------------------------+ + +MISC_SYSLOG_GET +~~~~~~~~~~~~~~~ + +message_id: 0xD +protocol_id: 0x84 + ++--------------------+---------------------------------------------------------+ +|Parameters | ++--------------------+---------------------------------------------------------+ +|Name |Description | ++--------------------+---------------------------------------------------------+ +|uint32 flags |Device specific flags that might impact the data returned| +| |or clearing of the data | ++--------------------+---------------------------------------------------------+ +|uint32 logindex |Index to the first log word. Will be the first element in| +| |the return array | ++--------------------+---------------------------------------------------------+ +|Return values | ++--------------------+---------------------------------------------------------+ +|Name |Description | ++--------------------+---------------------------------------------------------+ +|int32 status |SUCCESS: system log return | ++--------------------+---------------------------------------------------------+ +|uint32 numLogflags |Descriptor for the log data returned by this call. | +| |Bits[31:20] Number of remaining log words. | +| |Bits[15:12] Reserved, must be zero. | +| |Bits[11:0] Number of log words that are returned by this | +| |call | ++--------------------+---------------------------------------------------------+ +|uint32 syslog[N] |Log data array, N is defined in bits[11:0] of numLogflags| ++--------------------+---------------------------------------------------------+ + +NEGOTIATE_PROTOCOL_VERSION +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +message_id: 0x10 +protocol_id: 0x84 + ++--------------------+---------------------------------------------------------+ +|Parameters | ++--------------------+---------------------------------------------------------+ +|Name |Description | ++--------------------+---------------------------------------------------------+ +|uint32 version |The negotiated protocol version the agent intends to use | ++--------------------+---------------------------------------------------------+ +|Return values | ++--------------------+---------------------------------------------------------+ +|Name |Description | ++--------------------+---------------------------------------------------------+ +|int32 status |SUCCESS: if the negotiated protocol version is supported | +| |by the platform. All commands, responses, and | +| |notifications post successful return of this command must| +| |comply with the negotiated version. | +| |NOT_SUPPORTED: if the protocol version is not supported. | ++--------------------+---------------------------------------------------------+ + +Notifications +_____________ + +MISC_CONTROL_EVENT +~~~~~~~~~~~~~~~~~~ + +message_id: 0x0 +protocol_id: 0x81 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 ctrlid |Identifier for the control that caused the event. | ++------------------+-----------------------------------------------------------+ +|uint32 flags |Event flags, varies by control. | ++------------------+-----------------------------------------------------------+ + diff --git a/Documentation/firmware-guide/nxp/index.rst b/Documentation/firmware-guide/nxp/index.rst new file mode 100644 index 000000000000..b38c980a50c6 --- /dev/null +++ b/Documentation/firmware-guide/nxp/index.rst @@ -0,0 +1,10 @@ +.. SPDX-License-Identifier: GPL-2.0 + +==================== +NXP Firmware Support +==================== + +.. toctree:: + :maxdepth: 1 + + imx95-scmi