diff mbox series

[v6,2/3] Input: adp5588-keys - add support for pure gpio

Message ID 20240704-adp5588_gpio_support-v6-2-cb65514d714b@analog.com (mailing list archive)
State Superseded
Headers show
Series adp5588-keys: Support for dedicated gpio operation | expand

Commit Message

Utsav Agarwal via B4 Relay July 4, 2024, 10:45 a.m. UTC
From: Utsav Agarwal <utsav.agarwal@analog.com>

Keypad specific setup is relaxed if no keypad rows/columns are specified,
enabling a purely gpio operation.

Signed-off-by: Utsav Agarwal <utsav.agarwal@analog.com>
---
 drivers/input/keyboard/adp5588-keys.c | 27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)

Comments

Nuno Sá July 4, 2024, 11:10 a.m. UTC | #1
On Thu, 2024-07-04 at 11:45 +0100, Utsav Agarwal via B4 Relay wrote:
> From: Utsav Agarwal <utsav.agarwal@analog.com>
> 
> Keypad specific setup is relaxed if no keypad rows/columns are specified,
> enabling a purely gpio operation.
> 
> Signed-off-by: Utsav Agarwal <utsav.agarwal@analog.com>
> ---
>  drivers/input/keyboard/adp5588-keys.c | 27 +++++++++++++++++++++++++++
>  1 file changed, 27 insertions(+)
> 
> diff --git a/drivers/input/keyboard/adp5588-keys.c
> b/drivers/input/keyboard/adp5588-keys.c
> index 09bcfc6b9408..572335c8ef0f 100644
> --- a/drivers/input/keyboard/adp5588-keys.c
> +++ b/drivers/input/keyboard/adp5588-keys.c
> @@ -188,6 +188,7 @@ struct adp5588_kpad {
>  	u32 cols;
>  	u32 unlock_keys[2];
>  	int nkeys_unlock;
> +	bool gpio_only;
>  	unsigned short keycode[ADP5588_KEYMAPSIZE];
>  	unsigned char gpiomap[ADP5588_MAXGPIO];
>  	struct gpio_chip gc;
> @@ -632,6 +633,21 @@ static int adp5588_fw_parse(struct adp5588_kpad *kpad)
>  	struct i2c_client *client = kpad->client;
>  	int ret, i;
>  
> +	/*
> +	 * Check if the device is to be operated purely in GPIO mode. To do
> +	 * so, check that no keypad rows or columns have been specified,
> +	 * since all GPINS should be configured as GPIO.
> +	 */
> +	ret = device_property_present(&client->dev,
> +			"keypad,num-rows");
> +	ret |= device_property_present(&client->dev,
> +			"keypad,num-columns");
> +	/* If purely GPIO, skip keypad setup */
> +	if (!ret) {
> +		kpad->gpio_only = true;
> +		return 0;
> +	}
> +
>  	ret = matrix_keypad_parse_properties(&client->dev, &kpad->rows,
>  					     &kpad->cols);
>  	if (ret)
> @@ -775,6 +791,11 @@ static int adp5588_probe(struct i2c_client *client)
>  	if (error)
>  		return error;
>  
> +	if (kpad->gpio_only && !client->irq) {
> +		dev_info(&client->dev, "Rev.%d, started as GPIO only\n",
> revid);
> +		return 0;
> +	}

You're still missing something regarding interrupts. If there's no client->irq
then you should not setup the gpio_irq_chip. Hence, in adp5588_gpio_add(), you
should have:

if (kpad->client->irq) {
	girq = &kpad->gc.irq;
	gpio_irq_chip_set_chip(girq, &adp5588_irq_chip);
	girq->handler = handle_bad_irq;
	girq->threaded = true;
}

- Nuno Sá
Agarwal, Utsav July 4, 2024, 12:51 p.m. UTC | #2
Hi Nuno,

> -----Original Message-----
> From: Nuno Sá <noname.nuno@gmail.com>
> Sent: Thursday, July 4, 2024 12:10 PM
> To: Agarwal, Utsav <Utsav.Agarwal@analog.com>; Hennerich, Michael
> <Michael.Hennerich@analog.com>; Dmitry Torokhov
> <dmitry.torokhov@gmail.com>; Rob Herring <robh@kernel.org>; Krzysztof
> Kozlowski <krzk+dt@kernel.org>; Conor Dooley <conor+dt@kernel.org>; Sa,
> Nuno <Nuno.Sa@analog.com>
> Cc: linux-input@vger.kernel.org; devicetree@vger.kernel.org; linux-
> kernel@vger.kernel.org; Artamonovs, Arturs
> <Arturs.Artamonovs@analog.com>; Bimpikas, Vasileios
> <Vasileios.Bimpikas@analog.com>; Gaskell, Oliver
> <Oliver.Gaskell@analog.com>
> Subject: Re: [PATCH v6 2/3] Input: adp5588-keys - add support for pure gpio
> 
> [External]
> 
> On Thu, 2024-07-04 at 11:45 +0100, Utsav Agarwal via B4 Relay wrote:
> > From: Utsav Agarwal <utsav.agarwal@analog.com>
> >
> > Keypad specific setup is relaxed if no keypad rows/columns are specified,
> > enabling a purely gpio operation.
> >
> > Signed-off-by: Utsav Agarwal <utsav.agarwal@analog.com>
> > ---
> >  drivers/input/keyboard/adp5588-keys.c | 27
> +++++++++++++++++++++++++++
> >  1 file changed, 27 insertions(+)
> >
> > diff --git a/drivers/input/keyboard/adp5588-keys.c
> > b/drivers/input/keyboard/adp5588-keys.c
> > index 09bcfc6b9408..572335c8ef0f 100644
> > --- a/drivers/input/keyboard/adp5588-keys.c
> > +++ b/drivers/input/keyboard/adp5588-keys.c
> > @@ -188,6 +188,7 @@ struct adp5588_kpad {
> >  	u32 cols;
> >  	u32 unlock_keys[2];
> >  	int nkeys_unlock;
> > +	bool gpio_only;
> >  	unsigned short keycode[ADP5588_KEYMAPSIZE];
> >  	unsigned char gpiomap[ADP5588_MAXGPIO];
> >  	struct gpio_chip gc;
> > @@ -632,6 +633,21 @@ static int adp5588_fw_parse(struct adp5588_kpad
> *kpad)
> >  	struct i2c_client *client = kpad->client;
> >  	int ret, i;
> >
> > +	/*
> > +	 * Check if the device is to be operated purely in GPIO mode. To do
> > +	 * so, check that no keypad rows or columns have been specified,
> > +	 * since all GPINS should be configured as GPIO.
> > +	 */
> > +	ret = device_property_present(&client->dev,
> > +			"keypad,num-rows");
> > +	ret |= device_property_present(&client->dev,
> > +			"keypad,num-columns");
> > +	/* If purely GPIO, skip keypad setup */
> > +	if (!ret) {
> > +		kpad->gpio_only = true;
> > +		return 0;
> > +	}
> > +
> >  	ret = matrix_keypad_parse_properties(&client->dev, &kpad->rows,
> >  					     &kpad->cols);
> >  	if (ret)
> > @@ -775,6 +791,11 @@ static int adp5588_probe(struct i2c_client *client)
> >  	if (error)
> >  		return error;
> >
> > +	if (kpad->gpio_only && !client->irq) {
> > +		dev_info(&client->dev, "Rev.%d, started as GPIO only\n",
> > revid);
> > +		return 0;
> > +	}
> 
> You're still missing something regarding interrupts. If there's no client->irq
> then you should not setup the gpio_irq_chip. Hence, in adp5588_gpio_add(),
> you
> should have:
> 
> if (kpad->client->irq) {
> 	girq = &kpad->gc.irq;
> 	gpio_irq_chip_set_chip(girq, &adp5588_irq_chip);
> 	girq->handler = handle_bad_irq;
> 	girq->threaded = true;
> }
> 
> - Nuno Sá

Thank you for pointing this out, I will add the same.

Thanks,
Utsav
diff mbox series

Patch

diff --git a/drivers/input/keyboard/adp5588-keys.c b/drivers/input/keyboard/adp5588-keys.c
index 09bcfc6b9408..572335c8ef0f 100644
--- a/drivers/input/keyboard/adp5588-keys.c
+++ b/drivers/input/keyboard/adp5588-keys.c
@@ -188,6 +188,7 @@  struct adp5588_kpad {
 	u32 cols;
 	u32 unlock_keys[2];
 	int nkeys_unlock;
+	bool gpio_only;
 	unsigned short keycode[ADP5588_KEYMAPSIZE];
 	unsigned char gpiomap[ADP5588_MAXGPIO];
 	struct gpio_chip gc;
@@ -632,6 +633,21 @@  static int adp5588_fw_parse(struct adp5588_kpad *kpad)
 	struct i2c_client *client = kpad->client;
 	int ret, i;
 
+	/*
+	 * Check if the device is to be operated purely in GPIO mode. To do
+	 * so, check that no keypad rows or columns have been specified,
+	 * since all GPINS should be configured as GPIO.
+	 */
+	ret = device_property_present(&client->dev,
+			"keypad,num-rows");
+	ret |= device_property_present(&client->dev,
+			"keypad,num-columns");
+	/* If purely GPIO, skip keypad setup */
+	if (!ret) {
+		kpad->gpio_only = true;
+		return 0;
+	}
+
 	ret = matrix_keypad_parse_properties(&client->dev, &kpad->rows,
 					     &kpad->cols);
 	if (ret)
@@ -775,6 +791,11 @@  static int adp5588_probe(struct i2c_client *client)
 	if (error)
 		return error;
 
+	if (kpad->gpio_only && !client->irq) {
+		dev_info(&client->dev, "Rev.%d, started as GPIO only\n", revid);
+		return 0;
+	}
+
 	error = devm_request_threaded_irq(&client->dev, client->irq,
 					  adp5588_hard_irq, adp5588_thread_irq,
 					  IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
@@ -785,6 +806,12 @@  static int adp5588_probe(struct i2c_client *client)
 		return error;
 	}
 
+	if (kpad->gpio_only) {
+		dev_info(&client->dev, "Rev.%d GPIO only, irq %d\n",
+				revid, client->irq);
+		return 0;
+	}
+
 	dev_info(&client->dev, "Rev.%d keypad, irq %d\n", revid, client->irq);
 	return 0;
 }