diff mbox series

[v8,3/3] dt-bindings: input: Update dtbinding for adp5588

Message ID 20240704-adp5588_gpio_support-v8-3-208cf5d4c2d6@analog.com (mailing list archive)
State New
Headers show
Series adp5588-keys: Support for dedicated gpio operation | expand

Commit Message

Utsav Agarwal via B4 Relay July 4, 2024, 2:26 p.m. UTC 
From: Utsav Agarwal <utsav.agarwal@analog.com>

Updating dt bindings for adp5588. Since the device can now function in a
purely gpio mode, the following keypad specific properties are now made
optional:
	- interrupts
	- keypad,num-rows
	- keypad,num-columns
	- linux,keymap

However the above properties are required to be specified when
configuring the device as a keypad, dependencies have been added
such that specifying either one would require the remaining as well.

Note that interrupts are optional, but required when the device has been
configured in keypad mode.

Signed-off-by: Utsav Agarwal <utsav.agarwal@analog.com>
---
 .../devicetree/bindings/input/adi,adp5588.yaml     | 45 +++++++++++++++++++---
 1 file changed, 40 insertions(+), 5 deletions(-)

Comments

Conor Dooley July 4, 2024, 4:12 p.m. UTC | #1 
On Thu, Jul 04, 2024 at 03:26:32PM +0100, Utsav Agarwal via B4 Relay wrote:
> From: Utsav Agarwal <utsav.agarwal@analog.com>
> 
> Updating dt bindings for adp5588. Since the device can now function in a
> purely gpio mode, the following keypad specific properties are now made
> optional:
> 	- interrupts
> 	- keypad,num-rows
> 	- keypad,num-columns
> 	- linux,keymap
> 
> However the above properties are required to be specified when
> configuring the device as a keypad, dependencies have been added
> such that specifying either one would require the remaining as well.
> 
> Note that interrupts are optional, but required when the device has been
> configured in keypad mode.
> 
> Signed-off-by: Utsav Agarwal <utsav.agarwal@analog.com>

Acked-by: Conor Dooley <conor.dooley@microchip.com>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/input/adi,adp5588.yaml b/Documentation/devicetree/bindings/input/adi,adp5588.yaml
index 26ea66834ae2..ccb24b8b7566 100644
--- a/Documentation/devicetree/bindings/input/adi,adp5588.yaml
+++ b/Documentation/devicetree/bindings/input/adi,adp5588.yaml
@@ -49,7 +49,10 @@  properties:
   interrupt-controller:
     description:
       This property applies if either keypad,num-rows lower than 8 or
-      keypad,num-columns lower than 10.
+      keypad,num-columns lower than 10. This property is optional if
+      keypad,num-rows or keypad,num-columns are not specified since the
+      device then acts as gpio only, during which interrupts may or may
+      not be utilized.
 
   '#interrupt-cells':
     const: 2
@@ -65,13 +68,28 @@  properties:
     minItems: 1
     maxItems: 2
 
+
+dependencies:
+  keypad,num-rows:
+    - linux,keymap
+    - keypad,num-columns
+  keypad,num-columns:
+    - linux,keymap
+    - keypad,num-rows
+  linux,keymap:
+    - keypad,num-rows
+    - keypad,num-columns
+
+if:
+  required:
+    - linux,keymap
+then:
+  required:
+    - interrupts
+
 required:
   - compatible
   - reg
-  - interrupts
-  - keypad,num-rows
-  - keypad,num-columns
-  - linux,keymap
 
 unevaluatedProperties: false
 
@@ -108,4 +126,21 @@  examples:
             >;
         };
     };
+
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        gpio@34 {
+            compatible = "adi,adp5588";
+            reg = <0x34>;
+
+            #gpio-cells = <2>;
+            gpio-controller;
+        };
+    };
+
 ...