diff mbox series

[RESEND,v4,1/2] dt-bindings: input: zinitix: Document touch-keys support

Message ID 20240713-zinitix-tkey-v4-1-14b7e2d5ace3@trvn.ru (mailing list archive)
State Superseded
Headers show
Series Add touch-keys support to the Zinitix touch driver | expand

Commit Message

Nikita Travkin July 13, 2024, 3:28 p.m. UTC
In some configurations the touch controller can support the touch-keys.
Document the linux,keycodes property that enables those keys and
specifies the keycodes that should be used to report the key events.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
---
 .../devicetree/bindings/input/touchscreen/zinitix,bt400.yaml   | 10 ++++++++++
 1 file changed, 10 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/input/touchscreen/zinitix,bt400.yaml b/Documentation/devicetree/bindings/input/touchscreen/zinitix,bt400.yaml
index b1507463a03e..3f663ce3e44e 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/zinitix,bt400.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/zinitix,bt400.yaml
@@ -16,6 +16,7 @@  maintainers:
 
 allOf:
   - $ref: touchscreen.yaml#
+  - $ref: ../input.yaml#
 
 properties:
   $nodename:
@@ -79,6 +80,15 @@  properties:
     $ref: /schemas/types.yaml#/definitions/uint32
     enum: [1, 2]
 
+  linux,keycodes:
+    description:
+      This property specifies an array of keycodes assigned to the
+      touch-keys that can be present in some touchscreen configurations.
+      If the touch-keys are enabled, controller firmware will assign some
+      touch sense lines to those keys.
+    minItems: 1
+    maxItems: 8
+
   touchscreen-size-x: true
   touchscreen-size-y: true
   touchscreen-fuzz-x: true