diff mbox series

[-next,v2,08/15] hwmon: (aquacomputer_d5next) Use devm_hid_hw_start_and_open in aqc_probe()

Message ID 20240909012313.500341-9-lizetao1@huawei.com (mailing list archive)
State Superseded
Headers show
Series HID: convert to devm_hid_hw_start_and_open() | expand

Commit Message

Li Zetao Sept. 9, 2024, 1:23 a.m. UTC
Currently, the aquacomputer_d5next module needs to maintain hid resources
by itself. Use devm_hid_hw_start_and_open helper to ensure that hid
resources are consistent with the device life cycle, and release
hid resources before device is released. At the same time, it can avoid
the goto-release encoding, drop the fail_and_close and fail_and_stop
lables, and directly return the error code when an error occurs.

Signed-off-by: Li Zetao <lizetao1@huawei.com>
---
v1 -> v2: Adjust commit information
v1:
https://lore.kernel.org/all/20240904123607.3407364-13-lizetao1@huawei.com/

 drivers/hwmon/aquacomputer_d5next.c | 39 +++++++----------------------
 1 file changed, 9 insertions(+), 30 deletions(-)

Comments

Guenter Roeck Sept. 9, 2024, 4:57 p.m. UTC | #1
On Mon, Sep 09, 2024 at 09:23:06AM +0800, Li Zetao wrote:
> Currently, the aquacomputer_d5next module needs to maintain hid resources
> by itself. Use devm_hid_hw_start_and_open helper to ensure that hid
> resources are consistent with the device life cycle, and release
> hid resources before device is released. At the same time, it can avoid
> the goto-release encoding, drop the fail_and_close and fail_and_stop
> lables, and directly return the error code when an error occurs.
> 
> Signed-off-by: Li Zetao <lizetao1@huawei.com>

Acked-by: Guenter Roeck <linux@roeck-us.net>

> ---
> v1 -> v2: Adjust commit information
> v1:
> https://lore.kernel.org/all/20240904123607.3407364-13-lizetao1@huawei.com/
> 
>  drivers/hwmon/aquacomputer_d5next.c | 39 +++++++----------------------
>  1 file changed, 9 insertions(+), 30 deletions(-)
> 
> diff --git a/drivers/hwmon/aquacomputer_d5next.c b/drivers/hwmon/aquacomputer_d5next.c
> index 8e55cd2f46f5..9b66ff0fe6e1 100644
> --- a/drivers/hwmon/aquacomputer_d5next.c
> +++ b/drivers/hwmon/aquacomputer_d5next.c
> @@ -1556,14 +1556,10 @@ static int aqc_probe(struct hid_device *hdev, const struct hid_device_id *id)
>  	if (ret)
>  		return ret;
>  
> -	ret = hid_hw_start(hdev, HID_CONNECT_HIDRAW);
> +	ret = devm_hid_hw_start_and_open(hdev, HID_CONNECT_HIDRAW);
>  	if (ret)
>  		return ret;
>  
> -	ret = hid_hw_open(hdev);
> -	if (ret)
> -		goto fail_and_stop;
> -
>  	switch (hdev->product) {
>  	case USB_PRODUCT_ID_AQUAERO:
>  		/*
> @@ -1577,10 +1573,8 @@ static int aqc_probe(struct hid_device *hdev, const struct hid_device_id *id)
>  		 * they present. The two other devices have the type of the second element in
>  		 * their respective collections set to 1, while the real device has it set to 0.
>  		 */
> -		if (hdev->collection[1].type != 0) {
> -			ret = -ENODEV;
> -			goto fail_and_close;
> -		}
> +		if (hdev->collection[1].type != 0)
> +			return -ENODEV;
>  
>  		priv->kind = aquaero;
>  
> @@ -1740,10 +1734,8 @@ static int aqc_probe(struct hid_device *hdev, const struct hid_device_id *id)
>  		 * Choose the right Leakshield device, because
>  		 * the other one acts as a keyboard
>  		 */
> -		if (hdev->type != 2) {
> -			ret = -ENODEV;
> -			goto fail_and_close;
> -		}
> +		if (hdev->type != 2)
> +			return -ENODEV;
>  
>  		priv->kind = leakshield;
>  
> @@ -1865,30 +1857,20 @@ static int aqc_probe(struct hid_device *hdev, const struct hid_device_id *id)
>  	priv->name = aqc_device_names[priv->kind];
>  
>  	priv->buffer = devm_kzalloc(&hdev->dev, priv->buffer_size, GFP_KERNEL);
> -	if (!priv->buffer) {
> -		ret = -ENOMEM;
> -		goto fail_and_close;
> -	}
> +	if (!priv->buffer)
> +		return -ENOMEM;
>  
>  	mutex_init(&priv->mutex);
>  
>  	priv->hwmon_dev = hwmon_device_register_with_info(&hdev->dev, priv->name, priv,
>  							  &aqc_chip_info, NULL);
>  
> -	if (IS_ERR(priv->hwmon_dev)) {
> -		ret = PTR_ERR(priv->hwmon_dev);
> -		goto fail_and_close;
> -	}
> +	if (IS_ERR(priv->hwmon_dev))
> +		return PTR_ERR(priv->hwmon_dev);
>  
>  	aqc_debugfs_init(priv);
>  
>  	return 0;
> -
> -fail_and_close:
> -	hid_hw_close(hdev);
> -fail_and_stop:
> -	hid_hw_stop(hdev);
> -	return ret;
>  }
>  
>  static void aqc_remove(struct hid_device *hdev)
> @@ -1897,9 +1879,6 @@ static void aqc_remove(struct hid_device *hdev)
>  
>  	debugfs_remove_recursive(priv->debugfs);
>  	hwmon_device_unregister(priv->hwmon_dev);
> -
> -	hid_hw_close(hdev);
> -	hid_hw_stop(hdev);
>  }
>  
>  static const struct hid_device_id aqc_table[] = {
> -- 
> 2.34.1
> 
>
Aleksa Savic Sept. 9, 2024, 5:29 p.m. UTC | #2
On 2024-09-09 03:23:06 GMT+02:00, Li Zetao wrote:
> Currently, the aquacomputer_d5next module needs to maintain hid resources
> by itself. Use devm_hid_hw_start_and_open helper to ensure that hid
> resources are consistent with the device life cycle, and release
> hid resources before device is released. At the same time, it can avoid
> the goto-release encoding, drop the fail_and_close and fail_and_stop
> lables, and directly return the error code when an error occurs.
> 
> Signed-off-by: Li Zetao <lizetao1@huawei.com>

Reviewed-by: Aleksa Savic <savicaleksa83@gmail.com>
diff mbox series

Patch

diff --git a/drivers/hwmon/aquacomputer_d5next.c b/drivers/hwmon/aquacomputer_d5next.c
index 8e55cd2f46f5..9b66ff0fe6e1 100644
--- a/drivers/hwmon/aquacomputer_d5next.c
+++ b/drivers/hwmon/aquacomputer_d5next.c
@@ -1556,14 +1556,10 @@  static int aqc_probe(struct hid_device *hdev, const struct hid_device_id *id)
 	if (ret)
 		return ret;
 
-	ret = hid_hw_start(hdev, HID_CONNECT_HIDRAW);
+	ret = devm_hid_hw_start_and_open(hdev, HID_CONNECT_HIDRAW);
 	if (ret)
 		return ret;
 
-	ret = hid_hw_open(hdev);
-	if (ret)
-		goto fail_and_stop;
-
 	switch (hdev->product) {
 	case USB_PRODUCT_ID_AQUAERO:
 		/*
@@ -1577,10 +1573,8 @@  static int aqc_probe(struct hid_device *hdev, const struct hid_device_id *id)
 		 * they present. The two other devices have the type of the second element in
 		 * their respective collections set to 1, while the real device has it set to 0.
 		 */
-		if (hdev->collection[1].type != 0) {
-			ret = -ENODEV;
-			goto fail_and_close;
-		}
+		if (hdev->collection[1].type != 0)
+			return -ENODEV;
 
 		priv->kind = aquaero;
 
@@ -1740,10 +1734,8 @@  static int aqc_probe(struct hid_device *hdev, const struct hid_device_id *id)
 		 * Choose the right Leakshield device, because
 		 * the other one acts as a keyboard
 		 */
-		if (hdev->type != 2) {
-			ret = -ENODEV;
-			goto fail_and_close;
-		}
+		if (hdev->type != 2)
+			return -ENODEV;
 
 		priv->kind = leakshield;
 
@@ -1865,30 +1857,20 @@  static int aqc_probe(struct hid_device *hdev, const struct hid_device_id *id)
 	priv->name = aqc_device_names[priv->kind];
 
 	priv->buffer = devm_kzalloc(&hdev->dev, priv->buffer_size, GFP_KERNEL);
-	if (!priv->buffer) {
-		ret = -ENOMEM;
-		goto fail_and_close;
-	}
+	if (!priv->buffer)
+		return -ENOMEM;
 
 	mutex_init(&priv->mutex);
 
 	priv->hwmon_dev = hwmon_device_register_with_info(&hdev->dev, priv->name, priv,
 							  &aqc_chip_info, NULL);
 
-	if (IS_ERR(priv->hwmon_dev)) {
-		ret = PTR_ERR(priv->hwmon_dev);
-		goto fail_and_close;
-	}
+	if (IS_ERR(priv->hwmon_dev))
+		return PTR_ERR(priv->hwmon_dev);
 
 	aqc_debugfs_init(priv);
 
 	return 0;
-
-fail_and_close:
-	hid_hw_close(hdev);
-fail_and_stop:
-	hid_hw_stop(hdev);
-	return ret;
 }
 
 static void aqc_remove(struct hid_device *hdev)
@@ -1897,9 +1879,6 @@  static void aqc_remove(struct hid_device *hdev)
 
 	debugfs_remove_recursive(priv->debugfs);
 	hwmon_device_unregister(priv->hwmon_dev);
-
-	hid_hw_close(hdev);
-	hid_hw_stop(hdev);
 }
 
 static const struct hid_device_id aqc_table[] = {