diff mbox series

HID: wacom: Set eraser status when either 'Eraser' or 'Invert' usage is set

Message ID 20241017183113.631272-1-jason.gerecke@wacom.com (mailing list archive)
State New
Delegated to: Jiri Kosina
Headers show
Series HID: wacom: Set eraser status when either 'Eraser' or 'Invert' usage is set | expand

Commit Message

Gerecke, Jason Oct. 17, 2024, 6:31 p.m. UTC 
From: Jason Gerecke <jason.gerecke@wacom.com>

Microsoft defines two slightly different behaviors for pens that are
being used to erase. The first one, for pens that can be used while
inverted specifies that both 'Invert' and 'Eraser' usages should be
set while the pen is in contact and erasing. For pens that use an
eraser button though, they specify that only the 'Eraser' usage should
be set (while hovering, only the 'Invert' usage is to be set).

We used our internal 'invert_state' flag to determine if a pen has an
intent to erase (whether hovering or not). That flag was previously
only depending on the 'Invert' usage, which was sufficient for the
first type of pen (EMR) but not the second type (AES). This commit
makes the flag depend on either usage being set, and also renames it
to make its function more clear.

This change should not normally have an impact on userspace due to
both the existing driver and firmware design. The driver already only
determines tool type based on the first event in an interaction (e.g.
it will see the 'Invert' bit set when the eraser comes into prox and
then report BTN_TOOL_RUBBER for the rest of the interaction, even if
'Invert' is cleared). AES firmware is also careful to send reports
that work through a set of defined state transitions, even in the
corner-case where the eraser button is pressed when the pen is already
in contact with the display (Prox|Tip -> Prox -> 0 -> Invert -> Eraser).
Regardless, it seems reasonable to ensure the driver's state variables
match programmer expectation.

Link: https://learn.microsoft.com/en-us/windows-hardware/design/component-guidelines/windows-pen-states
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
---
 drivers/hid/wacom_wac.c | 7 +++++--
 drivers/hid/wacom_wac.h | 2 +-
 2 files changed, 6 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c
index 413606bdf476d..fd0de9bae3d9a 100644
--- a/drivers/hid/wacom_wac.c
+++ b/drivers/hid/wacom_wac.c
@@ -2422,9 +2422,11 @@  static void wacom_wac_pen_event(struct hid_device *hdev, struct hid_field *field
 			wacom_wac->hid_data.sense_state = value;
 		return;
 	case HID_DG_INVERT:
-		wacom_wac->hid_data.invert_state = value;
+		wacom_wac->hid_data.eraser |= value;
 		return;
 	case HID_DG_ERASER:
+		wacom_wac->hid_data.eraser |= value;
+		fallthrough;
 	case HID_DG_TIPSWITCH:
 		wacom_wac->hid_data.tipswitch |= value;
 		return;
@@ -2565,7 +2567,7 @@  static void wacom_wac_pen_report(struct hid_device *hdev,
 
 	if (entering_range) { /* first in range */
 		/* Going into range select tool */
-		if (wacom_wac->hid_data.invert_state)
+		if (wacom_wac->hid_data.eraser)
 			wacom_wac->tool[0] = BTN_TOOL_RUBBER;
 		else if (wacom_wac->features.quirks & WACOM_QUIRK_AESPEN)
 			wacom_wac->tool[0] = BTN_TOOL_PEN;
@@ -2619,6 +2621,7 @@  static void wacom_wac_pen_report(struct hid_device *hdev,
 		}
 
 		wacom_wac->hid_data.tipswitch = false;
+		wacom_wac->hid_data.eraser = false;
 
 		input_sync(input);
 	}
diff --git a/drivers/hid/wacom_wac.h b/drivers/hid/wacom_wac.h
index c8803d5c6a71e..0c3c6a6aaae95 100644
--- a/drivers/hid/wacom_wac.h
+++ b/drivers/hid/wacom_wac.h
@@ -300,7 +300,7 @@  struct hid_data {
 	__s16 inputmode_index;	/* InputMode HID feature index in the report */
 	bool sense_state;
 	bool inrange_state;
-	bool invert_state;
+	bool eraser;
 	bool tipswitch;
 	bool barrelswitch;
 	bool barrelswitch2;