From patchwork Thu Nov 7 11:47:08 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: =?utf-8?q?Heiko_St=C3=BCbner?= X-Patchwork-Id: 13866266 Received: from gloria.sntech.de (gloria.sntech.de [185.11.138.130]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id D5B7720C474; Thu, 7 Nov 2024 11:47:57 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=185.11.138.130 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1730980080; cv=none; b=bYqW4RkhTUzbZ4gICnBbNytSxXKY9+hA19IetmELGQGFb8trh6UA/YP2JCaJ3iDawpDmnygl8+8m1a0rxnu6VgowpvH/vFKqZ6EnOHXvsq51fefjT8zsSn6TXNePfKdxkiLXa9NNDW8XPzBXo68Ck7wvk9KjZyvM29O0+40JuME= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1730980080; c=relaxed/simple; bh=9t1Tv+gesPmNmxr0lQJxwHBn0Mp6m4xEoC98WD1VfXg=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=fIxXc9QueMiwSM89CFOmuCNex+oFfybPk+3TJ3SS2XDpA2/Tif2WTzHoQntgCdpXyLgv5kW3zMN2lq8SXJ1IB+FKRieY9IAffolXd8+zrbN19SbIqvI83IUsY5qhsHczFaYSYe5JcAbO8jg2AKgL7F/EbxEZKO/kkM24ldzOGbU= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=sntech.de; spf=pass smtp.mailfrom=sntech.de; dkim=pass (2048-bit key) header.d=sntech.de header.i=@sntech.de header.b=GMnk/1UK; arc=none smtp.client-ip=185.11.138.130 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=sntech.de Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=sntech.de Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=sntech.de header.i=@sntech.de header.b="GMnk/1UK" DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=sntech.de; s=gloria202408; h=Content-Transfer-Encoding:MIME-Version:References: In-Reply-To:Message-ID:Date:Subject:Cc:To:From:Sender:Reply-To:Content-Type: Content-ID:Content-Description:Resent-Date:Resent-From:Resent-Sender: Resent-To:Resent-Cc:Resent-Message-ID:List-Id:List-Help:List-Unsubscribe: List-Subscribe:List-Post:List-Owner:List-Archive; bh=3TTK9hx0Q0YVsYayd2HMfhhvX3Er6OFuU5Vv4/bDBu8=; b=GMnk/1UKzRihev+bb2TLkMLGyY HZyiR5/ULzyBihb84DjtqR3ELMTt29BYZ+J6qc1qkjpHMVQuv7qk1FRHk0RwLIMHRHJe0LWu3vZPx 5deQ9nz3r/oUWpxhVc4b4PgEY2hBDTRz/6fYygkNiJTYjfxFvAh73K1nuXlxwDeioVFm2wJf4dhoB nwxRMHYwinok8JI9A+gFxwnkXjP+ZO4FngAZzWpfUynAQqoNJEE71qHdI0PB+99nTvTrIvGG7ckAk d/Ei9Nm2jf35gVt24tA+pa36PaAZxOoBAhBCdjrRpt0sPAX/RGdappAqDxbCpi0bvWNSHunKo9t/z cWFUjHhQ==; Received: from i53875b28.versanet.de ([83.135.91.40] helo=localhost.localdomain) by gloria.sntech.de with esmtpsa (TLS1.3) tls TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 (Exim 4.94.2) (envelope-from ) id 1t90z2-0005lF-2s; Thu, 07 Nov 2024 12:47:28 +0100 From: Heiko Stuebner To: lee@kernel.org, jikos@kernel.org, jic23@kernel.org Cc: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org, jdelvare@suse.com, linux@roeck-us.net, srinivas.pandruvada@linux.intel.com, bentiss@kernel.org, dmitry.torokhov@gmail.com, pavel@ucw.cz, ukleinek@debian.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-rockchip@lists.infradead.org, linux-input@vger.kernel.org, linux-iio@vger.kernel.org, linux-leds@vger.kernel.org, heiko@sntech.de Subject: [PATCH v9 5/9] leds: add driver for LEDs from qnap-mcu devices Date: Thu, 7 Nov 2024 12:47:08 +0100 Message-ID: <20241107114712.538976-6-heiko@sntech.de> X-Mailer: git-send-email 2.45.2 In-Reply-To: <20241107114712.538976-1-heiko@sntech.de> References: <20241107114712.538976-1-heiko@sntech.de> Precedence: bulk X-Mailing-List: linux-input@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 This adds a driver that connects to the qnap-mcu mfd driver and provides access to the LEDs on it. Signed-off-by: Heiko Stuebner --- MAINTAINERS | 1 + drivers/leds/Kconfig | 11 ++ drivers/leds/Makefile | 1 + drivers/leds/leds-qnap-mcu.c | 227 +++++++++++++++++++++++++++++++++++ 4 files changed, 240 insertions(+) create mode 100644 drivers/leds/leds-qnap-mcu.c diff --git a/MAINTAINERS b/MAINTAINERS index cd8d18f76d28..9abea0772d2b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -18881,6 +18881,7 @@ F: drivers/media/tuners/qm1d1c0042* QNAP MCU DRIVER M: Heiko Stuebner S: Maintained +F: drivers/leds/leds-qnap-mcu.c F: drivers/mfd/qnap-mcu.c F: include/linux/qnap-mcu.h diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index b784bb74a837..28a208fa893e 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -580,6 +580,17 @@ config LEDS_PCA995X LED driver chips accessed via the I2C bus. Supported devices include PCA9955BTW, PCA9952TW and PCA9955TW. +config LEDS_QNAP_MCU + tristate "LED Support for QNAP MCU controllers" + depends on LEDS_CLASS + depends on MFD_QNAP_MCU + help + This option enables support for LEDs available on embedded + controllers used in QNAP NAS devices. + + This driver can also be built as a module. If so, the module + will be called qnap-mcu-leds. + config LEDS_WM831X_STATUS tristate "LED support for status LEDs on WM831x PMICs" depends on LEDS_CLASS diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile index 18afbb5a23ee..c6f74865d729 100644 --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile @@ -79,6 +79,7 @@ obj-$(CONFIG_LEDS_PCA995X) += leds-pca995x.o obj-$(CONFIG_LEDS_PM8058) += leds-pm8058.o obj-$(CONFIG_LEDS_POWERNV) += leds-powernv.o obj-$(CONFIG_LEDS_PWM) += leds-pwm.o +obj-$(CONFIG_LEDS_QNAP_MCU) += leds-qnap-mcu.o obj-$(CONFIG_LEDS_REGULATOR) += leds-regulator.o obj-$(CONFIG_LEDS_SC27XX_BLTC) += leds-sc27xx-bltc.o obj-$(CONFIG_LEDS_SUN50I_A100) += leds-sun50i-a100.o diff --git a/drivers/leds/leds-qnap-mcu.c b/drivers/leds/leds-qnap-mcu.c new file mode 100644 index 000000000000..4e4709456261 --- /dev/null +++ b/drivers/leds/leds-qnap-mcu.c @@ -0,0 +1,227 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Driver for LEDs found on QNAP MCU devices + * + * Copyright (C) 2024 Heiko Stuebner + */ + +#include +#include +#include +#include +#include +#include + +enum qnap_mcu_err_led_mode { + QNAP_MCU_ERR_LED_ON = 0, + QNAP_MCU_ERR_LED_OFF = 1, + QNAP_MCU_ERR_LED_BLINK_FAST = 2, + QNAP_MCU_ERR_LED_BLINK_SLOW = 3, +}; + +struct qnap_mcu_err_led { + struct qnap_mcu *mcu; + struct led_classdev cdev; + char name[LED_MAX_NAME_SIZE]; + u8 num; + u8 mode; +}; + +static inline struct qnap_mcu_err_led * + cdev_to_qnap_mcu_err_led(struct led_classdev *led_cdev) +{ + return container_of(led_cdev, struct qnap_mcu_err_led, cdev); +} + +static int qnap_mcu_err_led_set(struct led_classdev *led_cdev, + enum led_brightness brightness) +{ + struct qnap_mcu_err_led *err_led = cdev_to_qnap_mcu_err_led(led_cdev); + u8 cmd[] = { '@', 'R', '0' + err_led->num, '0' }; + + /* Don't disturb a possible set blink-mode if LED stays on */ + if (brightness != 0 && err_led->mode >= QNAP_MCU_ERR_LED_BLINK_FAST) + return 0; + + err_led->mode = brightness ? QNAP_MCU_ERR_LED_ON : QNAP_MCU_ERR_LED_OFF; + cmd[3] = '0' + err_led->mode; + + return qnap_mcu_exec_with_ack(err_led->mcu, cmd, sizeof(cmd)); +} + +static int qnap_mcu_err_led_blink_set(struct led_classdev *led_cdev, + unsigned long *delay_on, + unsigned long *delay_off) +{ + struct qnap_mcu_err_led *err_led = cdev_to_qnap_mcu_err_led(led_cdev); + u8 cmd[] = { '@', 'R', '0' + err_led->num, '0' }; + + /* LED is off, nothing to do */ + if (err_led->mode == QNAP_MCU_ERR_LED_OFF) + return 0; + + if (*delay_on < 500) { + *delay_on = 100; + *delay_off = 100; + err_led->mode = QNAP_MCU_ERR_LED_BLINK_FAST; + } else { + *delay_on = 500; + *delay_off = 500; + err_led->mode = QNAP_MCU_ERR_LED_BLINK_SLOW; + } + + cmd[3] = '0' + err_led->mode; + + return qnap_mcu_exec_with_ack(err_led->mcu, cmd, sizeof(cmd)); +} + +static int qnap_mcu_register_err_led(struct device *dev, struct qnap_mcu *mcu, int num_err_led) +{ + struct qnap_mcu_err_led *err_led; + int ret; + + err_led = devm_kzalloc(dev, sizeof(*err_led), GFP_KERNEL); + if (!err_led) + return -ENOMEM; + + err_led->mcu = mcu; + err_led->num = num_err_led; + err_led->mode = QNAP_MCU_ERR_LED_OFF; + + scnprintf(err_led->name, LED_MAX_NAME_SIZE, "hdd%d:red:status", num_err_led + 1); + err_led->cdev.name = err_led->name; + + err_led->cdev.brightness_set_blocking = qnap_mcu_err_led_set; + err_led->cdev.blink_set = qnap_mcu_err_led_blink_set; + err_led->cdev.brightness = 0; + err_led->cdev.max_brightness = 1; + + ret = devm_led_classdev_register(dev, &err_led->cdev); + if (ret) + return ret; + + return qnap_mcu_err_led_set(&err_led->cdev, 0); +} + +enum qnap_mcu_usb_led_mode { + QNAP_MCU_USB_LED_ON = 1, + QNAP_MCU_USB_LED_OFF = 3, + QNAP_MCU_USB_LED_BLINK = 2, +}; + +struct qnap_mcu_usb_led { + struct qnap_mcu *mcu; + struct led_classdev cdev; + u8 mode; +}; + +static inline struct qnap_mcu_usb_led * + cdev_to_qnap_mcu_usb_led(struct led_classdev *led_cdev) +{ + return container_of(led_cdev, struct qnap_mcu_usb_led, cdev); +} + +static int qnap_mcu_usb_led_set(struct led_classdev *led_cdev, + enum led_brightness brightness) +{ + struct qnap_mcu_usb_led *usb_led = cdev_to_qnap_mcu_usb_led(led_cdev); + u8 cmd[] = { '@', 'C', 0 }; + + /* Don't disturb a possible set blink-mode if LED stays on */ + if (brightness != 0 && usb_led->mode == QNAP_MCU_USB_LED_BLINK) + return 0; + + usb_led->mode = brightness ? QNAP_MCU_USB_LED_ON : QNAP_MCU_USB_LED_OFF; + + /* + * Byte 3 is shared between the usb led target on/off/blink + * and also the buzzer control (in the input driver) + */ + cmd[2] = 'D' + usb_led->mode; + + return qnap_mcu_exec_with_ack(usb_led->mcu, cmd, sizeof(cmd)); +} + +static int qnap_mcu_usb_led_blink_set(struct led_classdev *led_cdev, + unsigned long *delay_on, + unsigned long *delay_off) +{ + struct qnap_mcu_usb_led *usb_led = cdev_to_qnap_mcu_usb_led(led_cdev); + u8 cmd[] = { '@', 'C', 0 }; + + /* LED is off, nothing to do */ + if (usb_led->mode == QNAP_MCU_USB_LED_OFF) + return 0; + + *delay_on = 250; + *delay_off = 250; + usb_led->mode = QNAP_MCU_USB_LED_BLINK; + + /* + * Byte 3 is shared between the USB LED target on/off/blink + * and also the buzzer control (in the input driver) + */ + cmd[2] = 'D' + usb_led->mode; + + return qnap_mcu_exec_with_ack(usb_led->mcu, cmd, sizeof(cmd)); +} + +static int qnap_mcu_register_usb_led(struct device *dev, struct qnap_mcu *mcu) +{ + struct qnap_mcu_usb_led *usb_led; + int ret; + + usb_led = devm_kzalloc(dev, sizeof(*usb_led), GFP_KERNEL); + if (!usb_led) + return -ENOMEM; + + usb_led->mcu = mcu; + usb_led->mode = QNAP_MCU_USB_LED_OFF; + usb_led->cdev.name = "usb:blue:disk"; + usb_led->cdev.brightness_set_blocking = qnap_mcu_usb_led_set; + usb_led->cdev.blink_set = qnap_mcu_usb_led_blink_set; + usb_led->cdev.brightness = 0; + usb_led->cdev.max_brightness = 1; + + ret = devm_led_classdev_register(dev, &usb_led->cdev); + if (ret) + return ret; + + return qnap_mcu_usb_led_set(&usb_led->cdev, 0); +} + +static int qnap_mcu_leds_probe(struct platform_device *pdev) +{ + struct qnap_mcu *mcu = dev_get_drvdata(pdev->dev.parent); + const struct qnap_mcu_variant *variant = pdev->dev.platform_data; + int ret; + + for (int i = 0; i < variant->num_drives; i++) { + ret = qnap_mcu_register_err_led(&pdev->dev, mcu, i); + if (ret) + return dev_err_probe(&pdev->dev, ret, + "failed to register error LED %d\n", i); + } + + if (variant->usb_led) { + ret = qnap_mcu_register_usb_led(&pdev->dev, mcu); + if (ret) + return dev_err_probe(&pdev->dev, ret, + "failed to register USB LED\n"); + } + + return 0; +} + +static struct platform_driver qnap_mcu_leds_driver = { + .probe = qnap_mcu_leds_probe, + .driver = { + .name = "qnap-mcu-leds", + }, +}; +module_platform_driver(qnap_mcu_leds_driver); + +MODULE_ALIAS("platform:qnap-mcu-leds"); +MODULE_AUTHOR("Heiko Stuebner "); +MODULE_DESCRIPTION("QNAP MCU LEDs driver"); +MODULE_LICENSE("GPL");