| Message ID | 20241112053059.3361-2-mjchen0829@gmail.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | Add support for nuvoton ma35d1 keypad controller | expand |
On Tue, Nov 12, 2024 at 05:30:58AM +0000, mjchen wrote: > Add YAML bindings for MA35D1 SoC keypad. > > Signed-off-by: mjchen <mjchen0829@gmail.com> > --- > .../bindings/input/nuvoton,ma35d1-keypad.yaml | 89 +++++++++++++++++++ > 1 file changed, 89 insertions(+) > create mode 100644 Documentation/devicetree/bindings/input/nuvoton,ma35d1-keypad.yaml > > diff --git a/Documentation/devicetree/bindings/input/nuvoton,ma35d1-keypad.yaml b/Documentation/devicetree/bindings/input/nuvoton,ma35d1-keypad.yaml > new file mode 100644 > index 000000000000..71debafc3890 > --- /dev/null > +++ b/Documentation/devicetree/bindings/input/nuvoton,ma35d1-keypad.yaml > @@ -0,0 +1,89 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/input/nuvoton,ma35d1-keypad.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Nuvoton MA35D1 Keypad > + > +maintainers: > + - Ming-jen Chen <mjchen0829@gmail.com> > + > +allOf: > + - $ref: /schemas/input/matrix-keymap.yaml# > + > +properties: > + compatible: > + const: nuvoton,ma35d1-kpi > + > + debounce-period: Not a common property, so it needs a vendor prefix. > + $ref: /schemas/types.yaml#/definitions/uint32 > + enum: [0, 8, 16, 32, 64, 128, 256, 512, 1024, 2048, 4096, 8192] > + description: | > + Key debounce period select, specified in terms of keypad IP clock cycles. > + Valid values include 0 (no debounce) and specific clock cycle values: > + 8, 16, 32, 64, 128, 256, 512, 1024, 2048, 4096, and 8192. > + > + nuvoton,key-scan-time: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: | > + Set the time it takes to scan each key in the keypad, in clock cycles of the IP. > + This parameter controls how frequently the keypad is scanned, adjusting the response time. > + The valid range is from 1 to 256 clock cycles. > + minimum: 1 > + maximum: 256 > + > + nuvoton,key-scan-time-div: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: | > + Set a divider that adjusts the scan time for each key. > + This value scales the time it takes to scan each key > + by multiplying the key-scan-time by the specified factor. > + For example, if you set key-scan-time to 64 cycles and configure key-scan-time-div to 2, > + the scan time for each key will be increased to 128 cycles (64 cycles * 2). time. > + minimum: 1 > + maximum: 256 Why are both of these properties required? Why not just provide a single value and let the driver figure it out (and why not use the standard input property poll-interval)? > + > + reg: > + maxItems: 1 > + > + interrupts: > + maxItems: 1 > + > + clocks: > + maxItems: 1 > + > +required: > + - compatible > + - reg > + - interrupts > + - clocks > + - linux,keymap > + - debounce-period > + - nuvoton,key-scan-time > + - nuvoton,key-scan-time-div > + > +unevaluatedProperties: false > + > +examples: > + - | > + #include <dt-bindings/input/input.h> > + keypad@404A0000 { > + compatible = "nuvoton,ma35d1-kpi"; > + reg = <0x404A0000 0x10000>; > + interrupts = <79>; > + clocks = <&clk>; > + keypad,num-rows = <2>; > + keypad,num-columns = <2>; > + > + linux,keymap = < > + MATRIX_KEY(0, 0, KEY_ENTER) > + MATRIX_KEY(0, 1, KEY_ENTER) > + MATRIX_KEY(1, 0, KEY_SPACE) > + MATRIX_KEY(1, 1, KEY_Z) > + >; > + > + debounce-period = <8>; > + nuvoton,key-scan-time = <1>; > + nuvoton,key-scan-time-div = <24>; > + }; > -- > 2.25.1 >
On Tue, Nov 12, 2024 at 05:30:58AM +0000, mjchen wrote: > Add YAML bindings for MA35D1 SoC keypad. > > Signed-off-by: mjchen <mjchen0829@gmail.com> > --- > .../bindings/input/nuvoton,ma35d1-keypad.yaml | 89 +++++++++++++++++++ > 1 file changed, 89 insertions(+) > create mode 100644 Documentation/devicetree/bindings/input/nuvoton,ma35d1-keypad.yaml > > diff --git a/Documentation/devicetree/bindings/input/nuvoton,ma35d1-keypad.yaml b/Documentation/devicetree/bindings/input/nuvoton,ma35d1-keypad.yaml > new file mode 100644 > index 000000000000..71debafc3890 > --- /dev/null > +++ b/Documentation/devicetree/bindings/input/nuvoton,ma35d1-keypad.yaml > @@ -0,0 +1,89 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/input/nuvoton,ma35d1-keypad.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Nuvoton MA35D1 Keypad > + > +maintainers: > + - Ming-jen Chen <mjchen0829@gmail.com> > + > +allOf: > + - $ref: /schemas/input/matrix-keymap.yaml# > + > +properties: > + compatible: > + const: nuvoton,ma35d1-kpi > + > + debounce-period: > + $ref: /schemas/types.yaml#/definitions/uint32 > + enum: [0, 8, 16, 32, 64, 128, 256, 512, 1024, 2048, 4096, 8192] > + description: | > + Key debounce period select, specified in terms of keypad IP clock cycles. > + Valid values include 0 (no debounce) and specific clock cycle values: > + 8, 16, 32, 64, 128, 256, 512, 1024, 2048, 4096, and 8192. No need to list the values twice. We already have a bunch of debounce time properties. Don't add more. If you have the clock frequency, then you can use the existing "debounce-delay-ms" and convert to register values. > + > + nuvoton,key-scan-time: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: | > + Set the time it takes to scan each key in the keypad, in clock cycles of the IP. > + This parameter controls how frequently the keypad is scanned, adjusting the response time. > + The valid range is from 1 to 256 clock cycles. > + minimum: 1 > + maximum: 256 > + > + nuvoton,key-scan-time-div: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: | > + Set a divider that adjusts the scan time for each key. > + This value scales the time it takes to scan each key > + by multiplying the key-scan-time by the specified factor. > + For example, if you set key-scan-time to 64 cycles and configure key-scan-time-div to 2, > + the scan time for each key will be increased to 128 cycles (64 cycles * 2). time. > + minimum: 1 > + maximum: 256 Again, we have existing properties such as scan-interval, scan-interval-ms, and scan-delay. How is this different? With a single property in time units, you can solve for how many clock cycles. > + > + reg: > + maxItems: 1 > + > + interrupts: > + maxItems: 1 > + > + clocks: > + maxItems: 1 > + > +required: > + - compatible > + - reg > + - interrupts > + - clocks > + - linux,keymap > + - debounce-period > + - nuvoton,key-scan-time > + - nuvoton,key-scan-time-div > + > +unevaluatedProperties: false > + > +examples: > + - | > + #include <dt-bindings/input/input.h> > + keypad@404A0000 { > + compatible = "nuvoton,ma35d1-kpi"; > + reg = <0x404A0000 0x10000>; > + interrupts = <79>; > + clocks = <&clk>; > + keypad,num-rows = <2>; > + keypad,num-columns = <2>; Surely these should be required? > + > + linux,keymap = < > + MATRIX_KEY(0, 0, KEY_ENTER) > + MATRIX_KEY(0, 1, KEY_ENTER) > + MATRIX_KEY(1, 0, KEY_SPACE) > + MATRIX_KEY(1, 1, KEY_Z) > + >; > + > + debounce-period = <8>; > + nuvoton,key-scan-time = <1>; > + nuvoton,key-scan-time-div = <24>; > + }; > -- > 2.25.1 >
diff --git a/Documentation/devicetree/bindings/input/nuvoton,ma35d1-keypad.yaml b/Documentation/devicetree/bindings/input/nuvoton,ma35d1-keypad.yaml new file mode 100644 index 000000000000..71debafc3890 --- /dev/null +++ b/Documentation/devicetree/bindings/input/nuvoton,ma35d1-keypad.yaml @@ -0,0 +1,89 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/nuvoton,ma35d1-keypad.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Nuvoton MA35D1 Keypad + +maintainers: + - Ming-jen Chen <mjchen0829@gmail.com> + +allOf: + - $ref: /schemas/input/matrix-keymap.yaml# + +properties: + compatible: + const: nuvoton,ma35d1-kpi + + debounce-period: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 8, 16, 32, 64, 128, 256, 512, 1024, 2048, 4096, 8192] + description: | + Key debounce period select, specified in terms of keypad IP clock cycles. + Valid values include 0 (no debounce) and specific clock cycle values: + 8, 16, 32, 64, 128, 256, 512, 1024, 2048, 4096, and 8192. + + nuvoton,key-scan-time: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Set the time it takes to scan each key in the keypad, in clock cycles of the IP. + This parameter controls how frequently the keypad is scanned, adjusting the response time. + The valid range is from 1 to 256 clock cycles. + minimum: 1 + maximum: 256 + + nuvoton,key-scan-time-div: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Set a divider that adjusts the scan time for each key. + This value scales the time it takes to scan each key + by multiplying the key-scan-time by the specified factor. + For example, if you set key-scan-time to 64 cycles and configure key-scan-time-div to 2, + the scan time for each key will be increased to 128 cycles (64 cycles * 2). time. + minimum: 1 + maximum: 256 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - linux,keymap + - debounce-period + - nuvoton,key-scan-time + - nuvoton,key-scan-time-div + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/input/input.h> + keypad@404A0000 { + compatible = "nuvoton,ma35d1-kpi"; + reg = <0x404A0000 0x10000>; + interrupts = <79>; + clocks = <&clk>; + keypad,num-rows = <2>; + keypad,num-columns = <2>; + + linux,keymap = < + MATRIX_KEY(0, 0, KEY_ENTER) + MATRIX_KEY(0, 1, KEY_ENTER) + MATRIX_KEY(1, 0, KEY_SPACE) + MATRIX_KEY(1, 1, KEY_Z) + >; + + debounce-period = <8>; + nuvoton,key-scan-time = <1>; + nuvoton,key-scan-time-div = <24>; + };
Add YAML bindings for MA35D1 SoC keypad. Signed-off-by: mjchen <mjchen0829@gmail.com> --- .../bindings/input/nuvoton,ma35d1-keypad.yaml | 89 +++++++++++++++++++ 1 file changed, 89 insertions(+) create mode 100644 Documentation/devicetree/bindings/input/nuvoton,ma35d1-keypad.yaml