@@ -14,6 +14,8 @@
#include "intel-thc-hw.h"
#include "quickspi-dev.h"
+#include "quickspi-hid.h"
+#include "quickspi-protocol.h"
struct quickspi_driver_data mtl = {
.max_packet_size_value = MAX_PACKET_SIZE_VALUE_MTL,
@@ -228,6 +230,37 @@ static irqreturn_t quickspi_irq_quick_handler(int irq, void *dev_id)
return IRQ_WAKE_THREAD;
}
+/**
+ * try_recover - Try to recovery THC and Device
+ * @qsdev: pointer to quickspi device
+ *
+ * This function is a error handler, called when fatal error happens.
+ * It try to reset Touch Device and re-configure THC to recovery
+ * transferring between Device and THC.
+ *
+ * Return: 0 if successful or error code on failed.
+ */
+static int try_recover(struct quickspi_device *qsdev)
+{
+ int ret;
+
+ ret = reset_tic(qsdev);
+ if (ret) {
+ dev_err(qsdev->dev, "Reset touch device failed, ret = %d\n", ret);
+ return ret;
+ }
+
+ thc_dma_unconfigure(qsdev->thc_hw);
+
+ ret = thc_dma_configure(qsdev->thc_hw);
+ if (ret) {
+ dev_err(qsdev->dev, "Re-configure THC DMA failed, ret = %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
/**
* quickspi_irq_thread_handler - IRQ thread handler of quickspi driver
*
@@ -239,15 +272,52 @@ static irqreturn_t quickspi_irq_quick_handler(int irq, void *dev_id)
static irqreturn_t quickspi_irq_thread_handler(int irq, void *dev_id)
{
struct quickspi_device *qsdev = dev_id;
+ size_t input_len;
+ int read_finished = 0;
+ int err_recover = 0;
int int_mask;
+ int ret;
if (qsdev->state == QUICKSPI_DISABLED)
return IRQ_HANDLED;
int_mask = thc_interrupt_handler(qsdev->thc_hw);
+ if (int_mask & BIT(THC_FATAL_ERR_INT) || int_mask & BIT(THC_TXN_ERR_INT)) {
+ err_recover = 1;
+ goto end;
+ }
+
+ if (int_mask & BIT(THC_NONDMA_INT)) {
+ if (qsdev->state == QUICKSPI_RESETING) {
+ qsdev->reset_ack = true;
+ wake_up_interruptible(&qsdev->reset_ack_wq);
+ } else {
+ qsdev->nondma_int_received = true;
+ wake_up_interruptible(&qsdev->nondma_int_received_wq);
+ }
+ }
+
+ if (int_mask & BIT(THC_RXDMA2_INT)) {
+ while (!read_finished) {
+ ret = thc_rxdma_read(qsdev->thc_hw, THC_RXDMA2, qsdev->input_buf,
+ &input_len, &read_finished);
+ if (ret) {
+ err_recover = 1;
+ goto end;
+ }
+
+ quickspi_handle_input_data(qsdev, input_len);
+ }
+ }
+
+end:
thc_interrupt_enable(qsdev->thc_hw, true);
+ if (err_recover)
+ if (try_recover(qsdev))
+ qsdev->state = QUICKSPI_DISABLED;
+
return IRQ_HANDLED;
}
@@ -280,8 +350,15 @@ static struct quickspi_device *quickspi_dev_init(struct pci_dev *pdev, void __io
qsdev->pdev = pdev;
qsdev->dev = dev;
qsdev->mem_addr = mem_addr;
+ qsdev->state = QUICKSPI_DISABLED;
qsdev->driver_data = (struct quickspi_driver_data *)id->driver_data;
+ init_waitqueue_head(&qsdev->reset_ack_wq);
+ init_waitqueue_head(&qsdev->nondma_int_received_wq);
+ init_waitqueue_head(&qsdev->report_desc_got_wq);
+ init_waitqueue_head(&qsdev->get_report_cmpl_wq);
+ init_waitqueue_head(&qsdev->set_report_cmpl_wq);
+
/* thc hw init */
qsdev->thc_hw = thc_dev_init(qsdev->dev, qsdev->mem_addr);
if (IS_ERR(qsdev->thc_hw)) {
@@ -290,6 +367,10 @@ static struct quickspi_device *quickspi_dev_init(struct pci_dev *pdev, void __io
return ERR_PTR(ret);
}
+ ret = thc_interrupt_quiesce(qsdev->thc_hw, true);
+ if (ret)
+ return ERR_PTR(ret);
+
ret = thc_port_select(qsdev->thc_hw, THC_PORT_TYPE_SPI);
if (ret) {
dev_err(dev, "Failed to select THC port, ret = %d.\n", ret);
@@ -302,10 +383,43 @@ static struct quickspi_device *quickspi_dev_init(struct pci_dev *pdev, void __io
return ERR_PTR(ret);
}
+ /* THC config for input/output address */
+ thc_spi_input_output_address_config(qsdev->thc_hw,
+ qsdev->input_report_hdr_addr,
+ qsdev->input_report_bdy_addr,
+ qsdev->output_report_addr);
+
+ /* THC config for spi read operation */
+ ret = thc_spi_read_config(qsdev->thc_hw, qsdev->spi_freq_val,
+ qsdev->spi_read_io_mode,
+ qsdev->spi_read_opcode,
+ qsdev->spi_packet_size);
+ if (ret) {
+ dev_err(dev, "thc_spi_read_config failed, ret = %d\n", ret);
+ return ERR_PTR(ret);
+ }
+
+ /* THC config for spi write operation */
+ ret = thc_spi_write_config(qsdev->thc_hw, qsdev->spi_freq_val,
+ qsdev->spi_write_io_mode,
+ qsdev->spi_write_opcode,
+ qsdev->spi_packet_size,
+ qsdev->performance_limit);
+ if (ret) {
+ dev_err(dev, "thc_spi_write_config failed, ret = %d\n", ret);
+ return ERR_PTR(ret);
+ }
+
+ thc_ltr_config(qsdev->thc_hw,
+ qsdev->active_ltr_val,
+ qsdev->low_power_ltr_val);
+
thc_interrupt_config(qsdev->thc_hw);
thc_interrupt_enable(qsdev->thc_hw, true);
+ qsdev->state = QUICKSPI_INITED;
+
return qsdev;
}
@@ -319,6 +433,103 @@ static struct quickspi_device *quickspi_dev_init(struct pci_dev *pdev, void __io
static void quickspi_dev_deinit(struct quickspi_device *qsdev)
{
thc_interrupt_enable(qsdev->thc_hw, false);
+ thc_ltr_unconfig(qsdev->thc_hw);
+
+ qsdev->state = QUICKSPI_DISABLED;
+}
+
+/**
+ * quickspi_dma_init - Configure THC DMA for quickspi device
+ * @qsdev: pointer to the quickspi device structure
+ *
+ * This function uses TIC's parameters(such as max input length, max output
+ * length) to allocate THC DMA buffers and configure THC DMA engines.
+ *
+ * Return: 0 if successful or error code on failed.
+ */
+static int quickspi_dma_init(struct quickspi_device *qsdev)
+{
+ int ret;
+
+ ret = thc_dma_set_max_packet_sizes(qsdev->thc_hw, 0,
+ le16_to_cpu(qsdev->dev_desc.max_input_len),
+ le16_to_cpu(qsdev->dev_desc.max_output_len),
+ 0);
+ if (ret)
+ return ret;
+
+ ret = thc_dma_allocate(qsdev->thc_hw);
+ if (ret) {
+ dev_err(qsdev->dev, "Allocate THC DMA buffer failed, ret = %d\n", ret);
+ return ret;
+ }
+
+ /* Enable RxDMA */
+ ret = thc_dma_configure(qsdev->thc_hw);
+ if (ret) {
+ dev_err(qsdev->dev, "Configure THC DMA failed, ret = %d\n", ret);
+ thc_dma_unconfigure(qsdev->thc_hw);
+ thc_dma_release(qsdev->thc_hw);
+ return ret;
+ }
+
+ return ret;
+}
+
+/**
+ * quickspi_dma_deinit - Release THC DMA for quickspi device
+ * @qsdev: pointer to the quickspi device structure
+ *
+ * Stop THC DMA engines and release all DMA buffers.
+ *
+ */
+static void quickspi_dma_deinit(struct quickspi_device *qsdev)
+{
+ thc_dma_unconfigure(qsdev->thc_hw);
+ thc_dma_release(qsdev->thc_hw);
+}
+
+/**
+ * quickspi_alloc_report_buf - Alloc report buffers
+ * @qsdev: pointer to the quickspi device structure
+ *
+ * Allocate report descriptor buffer, it will be used for restore TIC HID
+ * report descriptor.
+ *
+ * Allocate input report buffer, it will be used for receive HID input report
+ * data from TIC.
+ *
+ * Allocate output report buffer, it will be used for store HID output report,
+ * such as set feature.
+ *
+ * Return: 0 if successful or error code on failed.
+ */
+static int quickspi_alloc_report_buf(struct quickspi_device *qsdev)
+{
+ size_t max_report_len;
+ size_t max_input_len;
+
+ qsdev->report_descriptor = devm_kzalloc(qsdev->dev,
+ le16_to_cpu(qsdev->dev_desc.rep_desc_len),
+ GFP_KERNEL);
+ if (!qsdev->report_descriptor)
+ return -ENOMEM;
+
+ max_input_len = max(le16_to_cpu(qsdev->dev_desc.rep_desc_len),
+ le16_to_cpu(qsdev->dev_desc.max_input_len));
+
+ qsdev->input_buf = devm_kzalloc(qsdev->dev, max_input_len, GFP_KERNEL);
+ if (!qsdev->input_buf)
+ return -ENOMEM;
+
+ max_report_len = max(le16_to_cpu(qsdev->dev_desc.max_output_len),
+ le16_to_cpu(qsdev->dev_desc.max_input_len));
+
+ qsdev->report_buf = devm_kzalloc(qsdev->dev, max_report_len, GFP_KERNEL);
+ if (!qsdev->report_buf)
+ return -ENOMEM;
+
+ return 0;
}
/*
@@ -327,6 +538,18 @@ static void quickspi_dev_deinit(struct quickspi_device *qsdev)
* @pdev: point to pci device
* @id: point to pci_device_id structure
*
+ * This function initializes THC and HIDSPI device, the flow is:
+ * - do THC pci device initialization
+ * - query HIDSPI ACPI parameters
+ * - configure THC to HIDSPI mode
+ * - go through HIDSPI enumeration flow
+ * |- reset HIDSPI device
+ * |- read device descriptor
+ * - enable THC interrupt and DMA
+ * - read report descriptor
+ * - register HID device
+ * - enable runtime power management
+ *
* Return 0 if success or error code on failure.
*/
static int quickspi_probe(struct pci_dev *pdev,
@@ -390,8 +613,44 @@ static int quickspi_probe(struct pci_dev *pdev,
goto dev_deinit;
}
+ ret = reset_tic(qsdev);
+ if (ret) {
+ dev_err(&pdev->dev, "Reset Touch Device failed, ret = %d\n", ret);
+ goto dev_deinit;
+ }
+
+ ret = quickspi_alloc_report_buf(qsdev);
+ if (ret) {
+ dev_err(&pdev->dev, "Alloc report buffers failed, ret= %d\n", ret);
+ goto dev_deinit;
+ }
+
+ ret = quickspi_dma_init(qsdev);
+ if (ret) {
+ dev_err(&pdev->dev, "Setup THC DMA failed, ret= %d\n", ret);
+ goto dev_deinit;
+ }
+
+ ret = quickspi_get_report_descriptor(qsdev);
+ if (ret) {
+ dev_err(&pdev->dev, "Get report descriptor failed, ret = %d\n", ret);
+ goto dma_deinit;
+ }
+
+ ret = quickspi_hid_probe(qsdev);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to register HID device, ret = %d\n", ret);
+ goto dma_deinit;
+ }
+
+ qsdev->state = QUICKSPI_ENABLED;
+
+ dev_dbg(&pdev->dev, "QuickSPI probe success\n");
+
return 0;
+dma_deinit:
+ quickspi_dma_deinit(qsdev);
dev_deinit:
quickspi_dev_deinit(qsdev);
unmap_io_region:
@@ -418,6 +677,9 @@ static void quickspi_remove(struct pci_dev *pdev)
if (!qsdev)
return;
+ quickspi_hid_remove(qsdev);
+ quickspi_dma_deinit(qsdev);
+
quickspi_dev_deinit(qsdev);
pcim_iounmap_regions(pdev, BIT(0));
@@ -441,6 +703,9 @@ static void quickspi_shutdown(struct pci_dev *pdev)
if (!qsdev)
return;
+ /* Must stop DMA before reboot to avoid DMA entering into unknown state */
+ quickspi_dma_deinit(qsdev);
+
quickspi_dev_deinit(qsdev);
}
@@ -220,6 +220,9 @@ void quickspi_handle_input_data(struct quickspi_device *qsdev, u32 buf_len)
break;
case DATA:
+ if (qsdev->state != QUICKSPI_ENABLED)
+ return;
+
if (input_len > le16_to_cpu(qsdev->dev_desc.max_input_len)) {
dev_err_once(qsdev->dev, "Unexpected too large input report length: %u\n",
input_len);