@@ -8,11 +8,14 @@
#include <linux/interrupt.h>
#include <linux/irqreturn.h>
#include <linux/pci.h>
+#include <linux/sizes.h>
#include "intel-thc-dev.h"
#include "intel-thc-hw.h"
#include "quicki2c-dev.h"
+#include "quicki2c-hid.h"
+#include "quicki2c-protocol.h"
/* THC QuickI2C ACPI method to get device properties */
/* HIDI2C device method */
@@ -210,6 +213,69 @@ static irqreturn_t quicki2c_irq_quick_handler(int irq, void *dev_id)
return IRQ_WAKE_THREAD;
}
+/**
+ * try_recover - Try to recovery THC and Device
+ * @qcdev: pointer to quicki2c device
+ *
+ * This function is a error handler, called when fatal error happens.
+ * It try to reset Touch Device and re-configure THC to recovery
+ * transferring between Device and THC.
+ *
+ * Return: 0 if successful or error code on failed
+ */
+static int try_recover(struct quicki2c_device *qcdev)
+{
+ int ret;
+
+ thc_dma_unconfigure(qcdev->thc_hw);
+
+ ret = thc_dma_configure(qcdev->thc_hw);
+ if (ret) {
+ dev_err(qcdev->dev, "Reconfig DMA failed\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int handle_input_report(struct quicki2c_device *qcdev)
+{
+ struct hidi2c_report_packet *pkt = (struct hidi2c_report_packet *)qcdev->input_buf;
+ int rx_dma_finished = 0;
+ size_t report_len;
+ int ret;
+
+ while (!rx_dma_finished) {
+ ret = thc_rxdma_read(qcdev->thc_hw, THC_RXDMA2,
+ (u8 *)pkt, &report_len,
+ &rx_dma_finished);
+ if (ret)
+ return ret;
+
+ if (!pkt->len) {
+ if (qcdev->state == QUICKI2C_RESETING) {
+ qcdev->reset_ack = true;
+ wake_up(&qcdev->reset_ack_wq);
+
+ qcdev->state = QUICKI2C_RESETED;
+ } else {
+ dev_warn(qcdev->dev, "unexpected DIR happen\n");
+ }
+
+ continue;
+ }
+
+ /* discard samples before driver probe complete */
+ if (qcdev->state != QUICKI2C_ENABLED)
+ continue;
+
+ quicki2c_hid_send_report(qcdev, pkt->data,
+ HIDI2C_DATA_LEN(le16_to_cpu(pkt->len)));
+ }
+
+ return 0;
+}
+
/**
* quicki2c_irq_thread_handler - IRQ thread handler of quicki2c driver
*
@@ -221,6 +287,7 @@ static irqreturn_t quicki2c_irq_quick_handler(int irq, void *dev_id)
static irqreturn_t quicki2c_irq_thread_handler(int irq, void *dev_id)
{
struct quicki2c_device *qcdev = dev_id;
+ int err_recover = 0;
int int_mask;
if (qcdev->state == QUICKI2C_DISABLED)
@@ -228,8 +295,25 @@ static irqreturn_t quicki2c_irq_thread_handler(int irq, void *dev_id)
int_mask = thc_interrupt_handler(qcdev->thc_hw);
+ if (int_mask & BIT(THC_FATAL_ERR_INT) || int_mask & BIT(THC_TXN_ERR_INT) ||
+ int_mask & BIT(THC_UNKNOWN_INT)) {
+ err_recover = 1;
+ goto exit;
+ }
+
+ if (int_mask & BIT(THC_RXDMA2_INT)) {
+ err_recover = handle_input_report(qcdev);
+ if (err_recover)
+ goto exit;
+ }
+
+exit:
thc_interrupt_enable(qcdev->thc_hw, true);
+ if (err_recover)
+ if (try_recover(qcdev))
+ qcdev->state = QUICKI2C_DISABLED;
+
return IRQ_HANDLED;
}
@@ -260,6 +344,9 @@ static struct quicki2c_device *quicki2c_dev_init(struct pci_dev *pdev, void __io
qcdev->pdev = pdev;
qcdev->dev = dev;
qcdev->mem_addr = mem_addr;
+ qcdev->state = QUICKI2C_DISABLED;
+
+ init_waitqueue_head(&qcdev->reset_ack_wq);
/* thc hw init */
qcdev->thc_hw = thc_dev_init(qcdev->dev, qcdev->mem_addr);
@@ -275,6 +362,10 @@ static struct quicki2c_device *quicki2c_dev_init(struct pci_dev *pdev, void __io
return ERR_PTR(ret);
}
+ ret = thc_interrupt_quiesce(qcdev->thc_hw, true);
+ if (ret)
+ return ERR_PTR(ret);
+
ret = thc_port_select(qcdev->thc_hw, THC_PORT_TYPE_I2C);
if (ret) {
dev_err_once(dev, "Failed to select THC port, ret = %d.\n", ret);
@@ -288,10 +379,14 @@ static struct quicki2c_device *quicki2c_dev_init(struct pci_dev *pdev, void __io
if (ret)
return ERR_PTR(ret);
+ thc_int_trigger_type_select(qcdev->thc_hw, false);
+
thc_interrupt_config(qcdev->thc_hw);
thc_interrupt_enable(qcdev->thc_hw, true);
+ qcdev->state = QUICKI2C_INITED;
+
return qcdev;
}
@@ -305,6 +400,114 @@ static struct quicki2c_device *quicki2c_dev_init(struct pci_dev *pdev, void __io
static void quicki2c_dev_deinit(struct quicki2c_device *qcdev)
{
thc_interrupt_enable(qcdev->thc_hw, false);
+ thc_ltr_unconfig(qcdev->thc_hw);
+
+ qcdev->state = QUICKI2C_DISABLED;
+}
+
+/**
+ * quicki2c_dma_init - Configure THC DMA for quicki2c device
+ * @qcdev: pointer to the quicki2c device structure
+ *
+ * This function uses TIC's parameters(such as max input length, max output
+ * length) to allocate THC DMA buffers and configure THC DMA engines.
+ *
+ * Return: 0 if success or error code on failed.
+ */
+static int quicki2c_dma_init(struct quicki2c_device *qcdev)
+{
+ size_t swdma_max_len;
+ int ret;
+
+ swdma_max_len = max(le16_to_cpu(qcdev->dev_desc.max_input_len),
+ le16_to_cpu(qcdev->dev_desc.report_desc_len));
+
+ ret = thc_dma_set_max_packet_sizes(qcdev->thc_hw, 0,
+ le16_to_cpu(qcdev->dev_desc.max_input_len),
+ le16_to_cpu(qcdev->dev_desc.max_output_len),
+ swdma_max_len);
+ if (ret)
+ return ret;
+
+ ret = thc_dma_allocate(qcdev->thc_hw);
+ if (ret) {
+ dev_err(qcdev->dev, "Allocate THC DMA buffer failed, ret = %d\n", ret);
+ return ret;
+ }
+
+ /* Enable RxDMA */
+ ret = thc_dma_configure(qcdev->thc_hw);
+ if (ret) {
+ dev_err(qcdev->dev, "Configure THC DMA failed, ret = %d\n", ret);
+ thc_dma_unconfigure(qcdev->thc_hw);
+ thc_dma_release(qcdev->thc_hw);
+ return ret;
+ }
+
+ return ret;
+}
+
+/**
+ * quicki2c_dma_deinit - Release THC DMA for quicki2c device
+ * @qcdev: pointer to the quicki2c device structure
+ *
+ * Stop THC DMA engines and release all DMA buffers.
+ *
+ */
+static void quicki2c_dma_deinit(struct quicki2c_device *qcdev)
+{
+ thc_dma_unconfigure(qcdev->thc_hw);
+ thc_dma_release(qcdev->thc_hw);
+}
+
+/**
+ * quicki2c_alloc_report_buf - Alloc report buffers
+ * @qcdev: pointer to the quicki2c device structure
+ *
+ * Allocate report descriptor buffer, it will be used for restore TIC HID
+ * report descriptor.
+ *
+ * Allocate input report buffer, it will be used for receive HID input report
+ * data from TIC.
+ *
+ * Allocate output report buffer, it will be used for store HID output report,
+ * such as set feature.
+ *
+ * Return: 0 if success or error code on failed.
+ */
+static int quicki2c_alloc_report_buf(struct quicki2c_device *qcdev)
+{
+ size_t max_report_len;
+
+ qcdev->report_descriptor = devm_kzalloc(qcdev->dev,
+ le16_to_cpu(qcdev->dev_desc.report_desc_len),
+ GFP_KERNEL);
+ if (!qcdev->report_descriptor)
+ return -ENOMEM;
+
+ /*
+ * Some HIDI2C devices don't declare input/output max length correctly,
+ * give default 4K buffer to avoid DMA buffer overrun.
+ */
+ max_report_len = max(le16_to_cpu(qcdev->dev_desc.max_input_len), SZ_4K);
+
+ qcdev->input_buf = devm_kzalloc(qcdev->dev, max_report_len, GFP_KERNEL);
+ if (!qcdev->input_buf)
+ return -ENOMEM;
+
+ if (!le16_to_cpu(qcdev->dev_desc.max_output_len))
+ qcdev->dev_desc.max_output_len = cpu_to_le16(SZ_4K);
+
+ max_report_len = max(le16_to_cpu(qcdev->dev_desc.max_output_len),
+ max_report_len);
+
+ qcdev->report_buf = devm_kzalloc(qcdev->dev, max_report_len, GFP_KERNEL);
+ if (!qcdev->report_buf)
+ return -ENOMEM;
+
+ qcdev->report_len = max_report_len;
+
+ return 0;
}
/*
@@ -313,6 +516,18 @@ static void quicki2c_dev_deinit(struct quicki2c_device *qcdev)
* @pdev: point to pci device
* @id: point to pci_device_id structure
*
+ * This function initializes THC and HIDI2C device, the flow is:
+ * - do THC pci device initialization
+ * - query HIDI2C ACPI parameters
+ * - configure THC to HIDI2C mode
+ * - go through HIDI2C enumeration flow
+ * |- read device descriptor
+ * |- reset HIDI2C device
+ * - enable THC interrupt and DMA
+ * - read report descriptor
+ * - register HID device
+ * - enable runtime power management
+ *
* Return 0 if success or error code on failed.
*/
static int quicki2c_probe(struct pci_dev *pdev,
@@ -376,8 +591,60 @@ static int quicki2c_probe(struct pci_dev *pdev,
goto dev_deinit;
}
+ ret = quicki2c_get_device_descriptor(qcdev);
+ if (ret) {
+ dev_err(&pdev->dev, "Get device descriptor failed, ret = %d\n", ret);
+ goto dev_deinit;
+ }
+
+ ret = quicki2c_alloc_report_buf(qcdev);
+ if (ret) {
+ dev_err(&pdev->dev, "Alloc report buffers failed, ret= %d\n", ret);
+ goto dev_deinit;
+ }
+
+ ret = quicki2c_dma_init(qcdev);
+ if (ret) {
+ dev_err(&pdev->dev, "Setup THC DMA failed, ret= %d\n", ret);
+ goto dev_deinit;
+ }
+
+ ret = thc_interrupt_quiesce(qcdev->thc_hw, false);
+ if (ret)
+ goto dev_deinit;
+
+ ret = quicki2c_set_power(qcdev, HIDI2C_ON);
+ if (ret) {
+ dev_err(&pdev->dev, "Set Power On command failed, ret= %d\n", ret);
+ goto dev_deinit;
+ }
+
+ ret = quicki2c_reset(qcdev);
+ if (ret) {
+ dev_err(&pdev->dev, "Reset HIDI2C device failed, ret= %d\n", ret);
+ goto dev_deinit;
+ }
+
+ ret = quicki2c_get_report_descriptor(qcdev);
+ if (ret) {
+ dev_err(&pdev->dev, "Get report descriptor failed, ret = %d\n", ret);
+ goto dma_deinit;
+ }
+
+ ret = quicki2c_hid_probe(qcdev);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to register HID device, ret = %d\n", ret);
+ goto dma_deinit;
+ }
+
+ qcdev->state = QUICKI2C_ENABLED;
+
+ dev_dbg(&pdev->dev, "QuickI2C probe success\n");
+
return 0;
+dma_deinit:
+ quicki2c_dma_deinit(qcdev);
dev_deinit:
quicki2c_dev_deinit(qcdev);
unmap_io_region:
@@ -404,6 +671,9 @@ static void quicki2c_remove(struct pci_dev *pdev)
if (!qcdev)
return;
+ quicki2c_hid_remove(qcdev);
+ quicki2c_dma_deinit(qcdev);
+
quicki2c_dev_deinit(qcdev);
pcim_iounmap_regions(pdev, BIT(0));
@@ -427,6 +697,9 @@ static void quicki2c_shutdown(struct pci_dev *pdev)
if (!qcdev)
return;
+ /* Must stop DMA before reboot to avoid DMA entering into unknown state */
+ quicki2c_dma_deinit(qcdev);
+
quicki2c_dev_deinit(qcdev);
}
@@ -5,6 +5,7 @@
#define _QUICKI2C_DEV_H_
#include <linux/hid-over-i2c.h>
+#include <linux/workqueue.h>
#define THC_LNL_DEVICE_ID_I2C_PORT1 0xA848
#define THC_LNL_DEVICE_ID_I2C_PORT2 0xA84A
@@ -141,6 +142,8 @@ struct acpi_device;
* @input_buf: store a copy of latest input report data
* @report_buf: store a copy of latest input/output report packet from set/get feature
* @report_len: the length of input/output report packet
+ * @reset_ack_wq: workqueue for waiting reset response from device
+ * @reset_ack: indicate reset response received or not
*/
struct quicki2c_device {
struct device *dev;
@@ -167,6 +170,9 @@ struct quicki2c_device {
u8 *input_buf;
u8 *report_buf;
u32 report_len;
+
+ wait_queue_head_t reset_ack_wq;
+ bool reset_ack;
};
#endif /* _QUICKI2C_DEV_H_ */
@@ -195,3 +195,30 @@ int quicki2c_set_report(struct quicki2c_device *qcdev, u8 report_type,
return buf_len;
}
+
+#define HIDI2C_RESET_TIMEOUT 5
+
+int quicki2c_reset(struct quicki2c_device *qcdev)
+{
+ int ret;
+
+ qcdev->reset_ack = false;
+ qcdev->state = QUICKI2C_RESETING;
+
+ ret = write_cmd_to_txdma(qcdev, HIDI2C_RESET, HIDI2C_RESERVED, 0, NULL, 0);
+ if (ret) {
+ dev_err_once(qcdev->dev, "Send reset command failed, ret %d\n", ret);
+ return ret;
+ }
+
+ ret = wait_event_interruptible_timeout(qcdev->reset_ack_wq, qcdev->reset_ack,
+ HIDI2C_RESET_TIMEOUT * HZ);
+ if (ret <= 0 || !qcdev->reset_ack) {
+ dev_err_once(qcdev->dev,
+ "Wait reset response timed out ret:%d timeout:%ds\n",
+ ret, HIDI2C_RESET_TIMEOUT);
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
@@ -15,5 +15,6 @@ int quicki2c_set_report(struct quicki2c_device *qcdev, u8 report_type,
unsigned int reportnum, void *buf, u32 buf_len);
int quicki2c_get_device_descriptor(struct quicki2c_device *qcdev);
int quicki2c_get_report_descriptor(struct quicki2c_device *qcdev);
+int quicki2c_reset(struct quicki2c_device *qcdev);
#endif /* _QUICKI2C_PROTOCOL_H_ */