From patchwork Tue Mar 18 16:26:24 2025 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Mathieu Dubois-Briand X-Patchwork-Id: 14021305 Received: from relay6-d.mail.gandi.net (relay6-d.mail.gandi.net [217.70.183.198]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 3120C211A38; Tue, 18 Mar 2025 16:26:55 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=217.70.183.198 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1742315219; cv=none; b=Wjk0rrh2kA5fggtP1+55tm6KNlWVnyUZjNHQT3m5gQJUyHivkx2Iryk+BcjwwkdKkBOp6jrcn+tlfr7/VsOieQYgk8PGy5GzCIFh0jz4UW/ybXqQNIWKgA1RwOOkMhtFU2TPYWMWs551jvIgUtbMJE9SUsTyMMo5YCZziYu2heA= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1742315219; c=relaxed/simple; bh=eUGhPzhgxF35yqlWjMNClaRU3sbQwSrdyBxYK3LPOec=; h=From:Date:Subject:MIME-Version:Content-Type:Message-Id:References: In-Reply-To:To:Cc; b=FoJ/7vU4KbAEWs4SAA6LMf7eotxfYthGoZ5iSx4zDCb4a4zr7YiqeiHT5vn0WvZSlDt1s1l5Y7XNFB9xzR0qO+9+TAcmS/42DHUbePwl9/7BLv0FOb+RNT31XA8IBq4KFyZHNnMxKNXKIVllSUJfRAHj7dJmg2f7fT+eiBBV+yU= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=bootlin.com; spf=pass smtp.mailfrom=bootlin.com; dkim=pass (2048-bit key) header.d=bootlin.com header.i=@bootlin.com header.b=O0Mmy2G0; arc=none smtp.client-ip=217.70.183.198 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=bootlin.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=bootlin.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=bootlin.com header.i=@bootlin.com header.b="O0Mmy2G0" Received: by mail.gandi.net (Postfix) with ESMTPSA id 94011442BA; Tue, 18 Mar 2025 16:26:53 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bootlin.com; s=gm1; t=1742315214; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version:content-type:content-type: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=5gR7Gx6QnAmTETgSqlw+Sw5PyJD+hfohNdfISAL5gtk=; b=O0Mmy2G012or+YWx/qEVfEsbhoJ4mO7S/lZv6J6r7WjYpBohmIfg4Zu2E7zzZIvKjOuu/q +yBQq2AUNy/16dcSkENOfl36FKG8TQkVQVpoOzH40nZ1DFX4L8ndfeHQ76WvpSuWEb9088 IsKuSTwMz6FEjOLywjH3nz1OmvQ9wFTdO0P8ESo35e2OZMqjNPlAIbDr1jzSJYxoVnKyKs QX+66J0uvVylrMpEpfvEdEbzB25VddbH7il4vrkHtQnc6heNyuyo8e4xKqkhxWtqdMws/F EKzbKLXfIfxacFEOctQtxtN7+euOg8bQkZlMscV5UZ2q+LmtmWe7Gu7yFHPSvQ== From: Mathieu Dubois-Briand Date: Tue, 18 Mar 2025 17:26:24 +0100 Subject: [PATCH v5 08/11] gpio: max7360: Add MAX7360 gpio support Precedence: bulk X-Mailing-List: linux-input@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20250318-mdb-max7360-support-v5-8-fb20baf97da0@bootlin.com> References: <20250318-mdb-max7360-support-v5-0-fb20baf97da0@bootlin.com> In-Reply-To: <20250318-mdb-max7360-support-v5-0-fb20baf97da0@bootlin.com> To: Lee Jones , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Kamel Bouhara , Linus Walleij , Bartosz Golaszewski , Dmitry Torokhov , =?utf-8?q?Uwe_Kleine-K=C3=B6n?= =?utf-8?q?ig?= , Michael Walle , Mark Brown , Greg Kroah-Hartman , "Rafael J. Wysocki" , Danilo Krummrich Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org, linux-input@vger.kernel.org, linux-pwm@vger.kernel.org, andriy.shevchenko@intel.com, =?utf-8?q?Gr=C3=A9?= =?utf-8?q?gory_Clement?= , Thomas Petazzoni , Mathieu Dubois-Briand X-Mailer: b4 0.14.1 X-Developer-Signature: v=1; a=ed25519-sha256; t=1742315204; l=9749; i=mathieu.dubois-briand@bootlin.com; s=20241219; h=from:subject:message-id; bh=eUGhPzhgxF35yqlWjMNClaRU3sbQwSrdyBxYK3LPOec=; b=AlOcBgYYqztWAKx0TWInkDo6eiIZpDeD16flHC/EVNP800bH7/oCHI4w6kqVLRQN4MNicZVOx fzitN8JAUdzAXdXEynSgyS/ThTdVDVFKtIna7XOZUMFSuvmPki81HQc X-Developer-Key: i=mathieu.dubois-briand@bootlin.com; a=ed25519; pk=1PVTmzPXfKvDwcPUzG0aqdGoKZJA3b9s+3DqRlm0Lww= X-GND-State: clean X-GND-Score: -100 X-GND-Cause: gggruggvucftvghtrhhoucdtuddrgeefvddrtddtgddugedvledvucetufdoteggodetrfdotffvucfrrhhofhhilhgvmecuifetpfffkfdpucggtfgfnhhsuhgsshgtrhhisggvnecuuegrihhlohhuthemuceftddunecusecvtfgvtghiphhivghnthhsucdlqddutddtmdenucfjughrpefhfffugggtgffkfhgjvfevofesthejredtredtjeenucfhrhhomhepofgrthhhihgvuhcuffhusghoihhsqdeurhhirghnugcuoehmrghthhhivghurdguuhgsohhishdqsghrihgrnhgusegsohhothhlihhnrdgtohhmqeenucggtffrrghtthgvrhhnpedthfegtedvvdehjeeiheehheeuteejleektdefheehgfefgeelhfetgedttdfhteenucfkphepvdgrtddumegtsgdugeemheehieemjegrtddtmeeffhgtfhemfhgstdgumeduvdeivdemvdgvjeeinecuvehluhhsthgvrhfuihiivgepudenucfrrghrrghmpehinhgvthepvdgrtddumegtsgdugeemheehieemjegrtddtmeeffhgtfhemfhgstdgumeduvdeivdemvdgvjeeipdhhvghloheplgduvdejrddtrddurddungdpmhgrihhlfhhrohhmpehmrghthhhivghurdguuhgsohhishdqsghrihgrnhgusegsohhothhlihhnrdgtohhmpdhnsggprhgtphhtthhopedvfedprhgtphhtthhopehlihhnuhigqdhinhhpuhhtsehvghgvrhdrkhgvrhhnvghlrdhorhhgpdhrtghpthhtohepuggrkhhrsehkvghrnhgvlhdrohhrghdprhgtphhtthhopehrrghfrggvlhesk hgvrhhnvghlrdhorhhgpdhrtghpthhtohepmhgrthhhihgvuhdrughusghoihhsqdgsrhhirghnugessghoohhtlhhinhdrtghomhdprhgtphhtthhopehukhhlvghinhgvkheskhgvrhhnvghlrdhorhhgpdhrtghpthhtohepkhgrmhgvlhdrsghouhhhrghrrgessghoohhtlhhinhdrtghomhdprhgtphhtthhopehgrhgvghhkhheslhhinhhugihfohhunhgurghtihhonhdrohhrghdprhgtphhtthhopehmfigrlhhlvgeskhgvrhhnvghlrdhorhhg X-GND-Sasl: mathieu.dubois-briand@bootlin.com Add driver for Maxim Integrated MAX7360 GPIO/GPO controller. Two sets of GPIOs are provided by the device: - Up to 8 GPIOs, shared with the PWM and rotary encoder functionalities. These GPIOs also provide interrupts on input changes. - Up to 6 GPOs, on unused keypad columns pins. Co-developed-by: Kamel Bouhara Signed-off-by: Kamel Bouhara Signed-off-by: Mathieu Dubois-Briand --- drivers/gpio/Kconfig | 12 +++ drivers/gpio/Makefile | 1 + drivers/gpio/gpio-max7360.c | 246 ++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 259 insertions(+) diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 98b4d1633b25..4ff68ec6a990 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -1445,6 +1445,18 @@ config GPIO_MADERA help Support for GPIOs on Cirrus Logic Madera class codecs. +config GPIO_MAX7360 + tristate "MAX7360 GPIO support" + depends on MFD_MAX7360 + select GPIO_REGMAP + select PINCTRL_MAX7360 + help + Allows to use MAX7360 I/O Expander PWM lines as GPIO and keypad COL + lines as GPO. + + This driver can also be built as a module. If so, the module will be + called gpio-max7360. + config GPIO_MAX77620 tristate "GPIO support for PMIC MAX77620 and MAX20024" depends on MFD_MAX77620 diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index af3ba4d81b58..581341b3e3e4 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -100,6 +100,7 @@ obj-$(CONFIG_GPIO_MAX7300) += gpio-max7300.o obj-$(CONFIG_GPIO_MAX7301) += gpio-max7301.o obj-$(CONFIG_GPIO_MAX730X) += gpio-max730x.o obj-$(CONFIG_GPIO_MAX732X) += gpio-max732x.o +obj-$(CONFIG_GPIO_MAX7360) += gpio-max7360.o obj-$(CONFIG_GPIO_MAX77620) += gpio-max77620.o obj-$(CONFIG_GPIO_MAX77650) += gpio-max77650.o obj-$(CONFIG_GPIO_MB86S7X) += gpio-mb86s7x.o diff --git a/drivers/gpio/gpio-max7360.c b/drivers/gpio/gpio-max7360.c new file mode 100644 index 000000000000..4acf0a9dbaba --- /dev/null +++ b/drivers/gpio/gpio-max7360.c @@ -0,0 +1,246 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright 2025 Bootlin + * + * Author: Kamel BOUHARA + * Author: Mathieu Dubois-Briand + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define MAX7360_GPIO_PORT 1 +#define MAX7360_GPIO_COL 2 + +static int max7360_get_available_gpos(struct device *dev, unsigned int *available_gpios) +{ + u32 columns; + int ret; + + ret = device_property_read_u32(dev->parent, "keypad,num-columns", &columns); + if (ret < 0) { + dev_err(dev, "Failed to read columns count\n"); + return ret; + } + + *available_gpios = min(MAX7360_MAX_GPO, MAX7360_MAX_KEY_COLS - columns); + + return 0; +} + +static int max7360_gpo_init_valid_mask(struct gpio_chip *gc, + unsigned long *valid_mask, + unsigned int ngpios) +{ + unsigned int available_gpios; + int ret; + + ret = max7360_get_available_gpos(gc->parent, &available_gpios); + if (ret) + return ret; + + bitmap_clear(valid_mask, 0, MAX7360_MAX_KEY_COLS - ngpios); + + return 0; +} + +static int max7360_set_gpos_count(struct device *dev, struct regmap *regmap) +{ + /* + * MAX7360 COL0 to COL7 pins can be used either as keypad columns, + * general purpose output or a mix of both. + * By default, all pins are used as keypad, here we update this + * configuration to allow to use some of them as GPIOs. + */ + unsigned int available_gpios; + unsigned int val; + int ret; + + ret = max7360_get_available_gpos(dev, &available_gpios); + if (ret) + return ret; + + /* + * Configure which GPIOs will be used for keypad. + * MAX7360_REG_DEBOUNCE contains configuration both for keypad debounce + * timings and gpos/keypad columns repartition. Only the later is + * modified here. + */ + val = FIELD_PREP(MAX7360_PORTS, available_gpios); + ret = regmap_write_bits(regmap, MAX7360_REG_DEBOUNCE, MAX7360_PORTS, val); + if (ret) { + dev_err(dev, "Failed to write max7360 columns/gpos configuration"); + return ret; + } + + return 0; +} + +static int max7360_gpio_reg_mask_xlate(struct gpio_regmap *gpio, + unsigned int base, unsigned int offset, + unsigned int *reg, unsigned int *mask) +{ + if (base == MAX7360_REG_PWMBASE) { + /* + * GPIO output is using PWM duty cycle registers: one register + * per line, with value being either 0 or 255. + */ + *reg = base + offset; + *mask = 0xFF; + } else { + *reg = base; + *mask = BIT(offset); + } + + return 0; +} + +static const struct regmap_irq max7360_regmap_irqs[MAX7360_MAX_GPIO] = { + REGMAP_IRQ_REG(0, 0, BIT(0)), + REGMAP_IRQ_REG(1, 0, BIT(1)), + REGMAP_IRQ_REG(2, 0, BIT(2)), + REGMAP_IRQ_REG(3, 0, BIT(3)), + REGMAP_IRQ_REG(4, 0, BIT(4)), + REGMAP_IRQ_REG(5, 0, BIT(5)), + REGMAP_IRQ_REG(6, 0, BIT(6)), + REGMAP_IRQ_REG(7, 0, BIT(7)), +}; + +static int max7360_handle_mask_sync(const int index, + const unsigned int mask_buf_def, + const unsigned int mask_buf, + void *const irq_drv_data) +{ + struct regmap *regmap = irq_drv_data; + unsigned int val; + + for (unsigned int i = 0; i < MAX7360_MAX_GPIO; ++i) { + val = (mask_buf & BIT(i)) ? MAX7360_PORT_CFG_INTERRUPT_MASK : 0; + regmap_write_bits(regmap, MAX7360_REG_PWMCFG(i), + MAX7360_PORT_CFG_INTERRUPT_MASK, val); + } + + return 0; +} + +static int max7360_gpio_probe(struct platform_device *pdev) +{ + struct regmap_irq_chip *irq_chip; + struct gpio_regmap_config gpio_config = { }; + struct device *dev = &pdev->dev; + unsigned long gpio_function; + struct regmap *regmap; + unsigned int outconf; + int ret; + + regmap = dev_get_regmap(dev->parent, NULL); + if (!regmap) + return dev_err_probe(dev, -ENODEV, "could not get parent regmap\n"); + + gpio_function = (uintptr_t)device_get_match_data(dev); + + if (gpio_function == MAX7360_GPIO_PORT && + (device_property_read_bool(dev, "interrupt-controller"))) { + /* + * Port GPIOs with interrupt-controller property: add IRQ + * controller. + */ + gpio_config.regmap_irq_flags = IRQF_TRIGGER_LOW | IRQF_ONESHOT | IRQF_SHARED; + gpio_config.regmap_irq_irqno = fwnode_irq_get_byname(dev_fwnode(dev->parent), + "inti"); + if (gpio_config.regmap_irq_irqno < 0) + return dev_err_probe(dev, gpio_config.regmap_irq_irqno, + "Failed to get IRQ\n"); + + irq_chip = devm_kzalloc(dev, sizeof(*irq_chip), GFP_KERNEL); + gpio_config.regmap_irq_chip = irq_chip; + if (!irq_chip) + return -ENOMEM; + + irq_chip->name = dev_name(dev); + irq_chip->status_base = MAX7360_REG_GPIOIN; + irq_chip->num_regs = 1; + irq_chip->num_irqs = MAX7360_MAX_GPIO; + irq_chip->irqs = max7360_regmap_irqs; + irq_chip->handle_mask_sync = max7360_handle_mask_sync; + irq_chip->status_is_level = true; + irq_chip->irq_drv_data = regmap; + + for (unsigned int i = 0; i < MAX7360_MAX_GPIO; i++) { + regmap_write_bits(regmap, MAX7360_REG_PWMCFG(i), + MAX7360_PORT_CFG_INTERRUPT_EDGES, + MAX7360_PORT_CFG_INTERRUPT_EDGES); + } + } + + if (gpio_function == MAX7360_GPIO_PORT) { + /* + * Port GPIOs: set output mode configuration (constant-current or not). + * This property is optional. + */ + outconf = 0; + ret = device_property_read_u32(dev, "maxim,constant-current-disable", &outconf); + if (ret && (ret != -EINVAL)) + return dev_err_probe(dev, ret, "Failed to read %s device property\n", + "maxim,constant-current-disable"); + + regmap_write(regmap, MAX7360_REG_GPIOOUTM, outconf); + } + + /* Add gpio device. */ + gpio_config.parent = dev; + gpio_config.regmap = regmap; + if (gpio_function == MAX7360_GPIO_PORT) { + gpio_config.ngpio = MAX7360_MAX_GPIO; + gpio_config.reg_dat_base = GPIO_REGMAP_ADDR(MAX7360_REG_GPIOIN); + gpio_config.reg_set_base = GPIO_REGMAP_ADDR(MAX7360_REG_PWMBASE); + gpio_config.reg_dir_out_base = GPIO_REGMAP_ADDR(MAX7360_REG_GPIOCTRL); + gpio_config.ngpio_per_reg = MAX7360_MAX_GPIO; + gpio_config.reg_mask_xlate = max7360_gpio_reg_mask_xlate; + } else { + ret = max7360_set_gpos_count(dev, regmap); + if (ret) + return dev_err_probe(dev, ret, "Failed to set GPOS pin count\n"); + + gpio_config.reg_set_base = GPIO_REGMAP_ADDR(MAX7360_REG_PORTS); + gpio_config.ngpio = MAX7360_MAX_KEY_COLS; + gpio_config.init_valid_mask = max7360_gpo_init_valid_mask; + } + + return PTR_ERR_OR_ZERO(devm_gpio_regmap_register(dev, &gpio_config)); +} + +static const struct of_device_id max7360_gpio_of_match[] = { + { + .compatible = "maxim,max7360-gpo", + .data = (void *)MAX7360_GPIO_COL + }, { + .compatible = "maxim,max7360-gpio", + .data = (void *)MAX7360_GPIO_PORT + }, { + } +}; +MODULE_DEVICE_TABLE(of, max7360_gpio_of_match); + +static struct platform_driver max7360_gpio_driver = { + .driver = { + .name = "max7360-gpio", + .of_match_table = max7360_gpio_of_match, + }, + .probe = max7360_gpio_probe, +}; +module_platform_driver(max7360_gpio_driver); + +MODULE_DESCRIPTION("MAX7360 GPIO driver"); +MODULE_AUTHOR("Kamel BOUHARA "); +MODULE_AUTHOR("Mathieu Dubois-Briand "); +MODULE_LICENSE("GPL");