From b362f0b16c2376103237931307f927eca32219b3 Mon Sep 17 00:00:00 2001
From: Huang Bo <huangbobupt@163.com>
Date: Wed, 26 Nov 2014 18:21:03 +0800
Subject: [PATCH] HID: add BETOP game controller force feedback support

Adds force feedback support for BETOP USB game controllers.
These devices are mass produced in China.

Signed-off-by: Huang Bo <huangbobupt@163.com>
---
 drivers/hid/Kconfig       |   10 +++
 drivers/hid/Makefile      |    1 +
 drivers/hid/hid-betopff.c |  160 +++++++++++++++++++++++++++++++++++++++++++++
 drivers/hid/hid-core.c    |    4 ++
 drivers/hid/hid-ids.h     |    5 ++
 5 files changed, 180 insertions(+)
 create mode 100644 drivers/hid/hid-betopff.c

diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index 4938bd3..3b4c47d 100755
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -146,6 +146,16 @@ config HID_BELKIN
 	---help---
 	Support for Belkin Flip KVM and Wireless keyboard.
 
+config HID_BETOP_FF
+	tristate "Betop Production Inc. force feedback support"
+	depends on USB_HID
+	select INPUT_FF_MEMLESS
+	---help---
+	Say Y here if you want to enable force feedback support for devices by
+	BETOP Production Ltd.
+	Currently the following devices are known to be supported:
+	 - BETOP 2185 PC & BFM MODE
+
 config HID_CHERRY
 	tristate "Cherry Cymotion keyboard" if EXPERT
 	depends on HID
diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile
index 4113999..edd4825 100755
--- a/drivers/hid/Makefile
+++ b/drivers/hid/Makefile
@@ -42,6 +42,7 @@ obj-$(CONFIG_HID_APPLE)		+= hid-apple.o
 obj-$(CONFIG_HID_APPLEIR)	+= hid-appleir.o
 obj-$(CONFIG_HID_AUREAL)        += hid-aureal.o
 obj-$(CONFIG_HID_BELKIN)	+= hid-belkin.o
+obj-$(CONFIG_HID_BETOP_FF)	+= hid-betopff.o
 obj-$(CONFIG_HID_CHERRY)	+= hid-cherry.o
 obj-$(CONFIG_HID_CHICONY)	+= hid-chicony.o
 obj-$(CONFIG_HID_CYPRESS)	+= hid-cypress.o
diff --git a/drivers/hid/hid-betopff.c b/drivers/hid/hid-betopff.c
new file mode 100644
index 0000000..69cfc8d
--- /dev/null
+++ b/drivers/hid/hid-betopff.c
@@ -0,0 +1,160 @@
+/*
+ *  Force feedback support for Betop based devices
+ *
+ *  The devices are distributed under various names and the same USB device ID
+ *  can be used in both adapters and actual game controllers.
+ *
+ *  0x11c2:0x2208 "BTP2185 BFM mode Joystick"
+ *   - tested with BTP2185 BFM Mode.
+ *
+ *  0x11C0:0x5506 "BTP2185 PC mode Joystick"
+ *   - tested with BTP2185 PC Mode.
+ *
+ *  0x8380:0x1850 "BTP2185 V2 PC mode USB Gamepad"
+ *   - tested with BTP2185 PC Mode with another version.
+ *
+ *  0x20bc:0x5500 "BTP2185 V2 BFM mode Joystick"
+ *   - tested with BTP2171s.
+ *  Copyright (c) 2014 Huang Bo <huangbobupt@163.com>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+
+#include <linux/input.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/hid.h>
+
+#include "hid-ids.h"
+
+struct betopff_device {
+	struct hid_report *report;
+};
+
+static int hid_betopff_play(struct input_dev *dev, void *data,
+			 struct ff_effect *effect)
+{
+	struct hid_device *hid = input_get_drvdata(dev);
+	struct betopff_device *betopff = data;
+	__u16 left, right;
+
+	left = effect->u.rumble.strong_magnitude;
+	right = effect->u.rumble.weak_magnitude;
+
+	betopff->report->field[2]->value[0] = left / 256;
+	betopff->report->field[3]->value[0] = right / 256;
+
+	hid_hw_request(hid, betopff->report, HID_REQ_SET_REPORT);
+
+	return 0;
+}
+
+static int betopff_init(struct hid_device *hid)
+{
+	struct betopff_device *betopff;
+	struct hid_report *report;
+	struct hid_input *hidinput =
+			list_first_entry(&hid->inputs, struct hid_input, list);
+	struct list_head *report_list =
+			&hid->report_enum[HID_OUTPUT_REPORT].report_list;
+	struct input_dev *dev = hidinput->input;
+	int field_count = 0;
+	int error;
+	int i, j;
+
+	if (list_empty(report_list)) {
+		hid_err(hid, "no output reports found\n");
+		return -ENODEV;
+	}
+
+	report = list_first_entry(report_list, struct hid_report, list);
+	/*
+	 * Actually there are 4 fields for 4 Bytes as below:
+	 * -----------------------------------------
+	 * Byte0  Byte1  Byte2	  Byte3
+	 * 0x00   0x00   left_motor right_motor
+	 * -----------------------------------------
+	 * Do init them with default value.
+	 */
+	for (i = 0; i < report->maxfield; i++) {
+		for (j = 0; j < report->field[i]->report_count; j++) {
+			report->field[i]->value[j] = 0x00;
+			field_count++;
+		}
+	}
+
+	if (field_count < 4) {
+		hid_err(hid, "not enough fields in the report: %d\n",
+				field_count);
+		return -ENODEV;
+	}
+
+	betopff = kzalloc(sizeof(*betopff), GFP_KERNEL);
+	if (!betopff)
+		return -ENOMEM;
+
+	set_bit(FF_RUMBLE, dev->ffbit);
+
+	error = input_ff_create_memless(dev, betopff, hid_betopff_play);
+	if (error) {
+		kfree(betopff);
+		return error;
+	}
+
+	betopff->report = report;
+	hid_hw_request(hid, betopff->report, HID_REQ_SET_REPORT);
+
+	hid_info(hid, "Force feedback for betop devices by huangbo <huangbobupt@163.com>\n");
+
+	return 0;
+}
+
+static int betop_probe(struct hid_device *hdev, const struct hid_device_id *id)
+{
+	int ret;
+
+	if (id->driver_data)
+		hdev->quirks |= HID_QUIRK_MULTI_INPUT;
+
+	ret = hid_parse(hdev);
+	if (ret) {
+		hid_err(hdev, "parse failed\n");
+		goto err;
+	}
+
+	ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT & ~HID_CONNECT_FF);
+	if (ret) {
+		hid_err(hdev, "hw start failed\n");
+		goto err;
+	}
+
+	betopff_init(hdev);
+
+	return 0;
+err:
+	return ret;
+}
+
+static const struct hid_device_id betop_devices[] = {
+	{ HID_USB_DEVICE(USB_VENDOR_ID_BETOP_2185BFM, 0x2208) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_BETOP_2185PC, 0x5506) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_BETOP_2185V2PC, 0x1850) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_BETOP_2185V2BFM, 0x5500) },
+	{ }
+};
+MODULE_DEVICE_TABLE(hid, betop_devices);
+
+static struct hid_driver betop_driver = {
+	.name = "betop",
+	.id_table = betop_devices,
+	.probe = betop_probe,
+};
+module_hid_driver(betop_driver);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index a622590..e64ccfc 100755
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1642,6 +1642,10 @@ static const struct hid_device_id hid_have_special_driver[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_AUREAL, USB_DEVICE_ID_AUREAL_W01RN) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_BELKIN, USB_DEVICE_ID_FLIP_KVM) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_BETOP_2185BFM, 0x2208) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_BETOP_2185PC, 0x5506) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_BETOP_2185V2PC, 0x1850) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_BETOP_2185V2BFM, 0x5500) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_BTC, USB_DEVICE_ID_BTC_EMPREX_REMOTE) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_BTC, USB_DEVICE_ID_BTC_EMPREX_REMOTE_2) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CHERRY, USB_DEVICE_ID_CHERRY_CYMOTION) },
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 161ee89..c432be9 100755
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -185,6 +185,11 @@
 #define USB_VENDOR_ID_BERKSHIRE		0x0c98
 #define USB_DEVICE_ID_BERKSHIRE_PCWD	0x1140
 
+#define USB_VENDOR_ID_BETOP_2185BFM	0x11c2
+#define USB_VENDOR_ID_BETOP_2185PC	0x11c0
+#define USB_VENDOR_ID_BETOP_2185V2PC	0x8380
+#define USB_VENDOR_ID_BETOP_2185V2BFM	0x20bc
+
 #define USB_VENDOR_ID_BTC		0x046e
 #define USB_DEVICE_ID_BTC_EMPREX_REMOTE	0x5578
 #define USB_DEVICE_ID_BTC_EMPREX_REMOTE_2	0x5577
-- 
1.7.9.5

