@@ -399,46 +399,60 @@ static unsigned int atkbd_compat_scancode(struct atkbd *atkbd, unsigned int code
}
/*
- * atkbd_interrupt(). Here takes place processing of data received from
- * the keyboard into events.
+ * Tries to handle frame or parity error by requesting the keyboard controller
+ * to resend the last byte. This historically not done on x86 as controllers
+ * there typically do not implement this command.
*/
-
-static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data,
- unsigned int flags)
+static bool __maybe_unused atkbd_handle_frame_error(struct ps2dev *ps2dev,
+ u8 data, unsigned int flags)
{
- struct atkbd *atkbd = atkbd_from_serio(serio);
- struct input_dev *dev = atkbd->dev;
- unsigned int code = data;
- int scroll = 0, hscroll = 0, click = -1;
- int value;
- unsigned short keycode;
+ struct atkbd *atkbd = container_of(ps2dev, struct atkbd, ps2dev);
+ struct serio *serio = ps2dev->serio;
- dev_dbg(&serio->dev, "Received %02x flags %02x\n", data, flags);
-
-#if !defined(__i386__) && !defined (__x86_64__)
- if ((flags & (SERIO_FRAME | SERIO_PARITY)) && (~flags & SERIO_TIMEOUT) && !atkbd->resend && atkbd->write) {
+ if ((flags & (SERIO_FRAME | SERIO_PARITY)) &&
+ (~flags & SERIO_TIMEOUT) &&
+ !atkbd->resend && atkbd->write) {
dev_warn(&serio->dev, "Frame/parity error: %02x\n", flags);
serio_write(serio, ATKBD_CMD_RESEND);
atkbd->resend = true;
- goto out;
+ return true;
}
if (!flags && data == ATKBD_RET_ACK)
atkbd->resend = false;
+
+ return false;
+}
+
+static enum ps2_disposition atkbd_pre_receive_byte(struct ps2dev *ps2dev,
+ u8 data, unsigned int flags)
+{
+ struct serio *serio = ps2dev->serio;
+
+ dev_dbg(&serio->dev, "Received %02x flags %02x\n", data, flags);
+
+#if !defined(__i386__) && !defined (__x86_64__)
+ if (atkbd_handle_frame_error(ps2dev, data, flags))
+ return PS2_IGNORE;
#endif
- if (unlikely(atkbd->ps2dev.flags & PS2_FLAG_ACK))
- if (ps2_handle_ack(&atkbd->ps2dev, data))
- goto out;
+ return PS2_PROCESS;
+}
- if (unlikely(atkbd->ps2dev.flags & PS2_FLAG_CMD))
- if (ps2_handle_response(&atkbd->ps2dev, data))
- goto out;
+static void atkbd_receive_byte(struct ps2dev *ps2dev, u8 data)
+{
+ struct serio *serio = ps2dev->serio;
+ struct atkbd *atkbd = container_of(ps2dev, struct atkbd, ps2dev);
+ struct input_dev *dev = atkbd->dev;
+ unsigned int code = data;
+ int scroll = 0, hscroll = 0, click = -1;
+ int value;
+ unsigned short keycode;
pm_wakeup_event(&serio->dev, 0);
if (!atkbd->enabled)
- goto out;
+ return;
input_event(dev, EV_MSC, MSC_RAW, code);
@@ -460,16 +474,16 @@ static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data,
case ATKBD_RET_BAT:
atkbd->enabled = false;
serio_reconnect(atkbd->ps2dev.serio);
- goto out;
+ return;
case ATKBD_RET_EMUL0:
atkbd->emul = 1;
- goto out;
+ return;
case ATKBD_RET_EMUL1:
atkbd->emul = 2;
- goto out;
+ return;
case ATKBD_RET_RELEASE:
atkbd->release = true;
- goto out;
+ return;
case ATKBD_RET_ACK:
case ATKBD_RET_NAK:
if (printk_ratelimit())
@@ -477,18 +491,18 @@ static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data,
"Spurious %s on %s. "
"Some program might be trying to access hardware directly.\n",
data == ATKBD_RET_ACK ? "ACK" : "NAK", serio->phys);
- goto out;
+ return;
case ATKBD_RET_ERR:
atkbd->err_count++;
dev_dbg(&serio->dev, "Keyboard on %s reports too many keys pressed.\n",
serio->phys);
- goto out;
+ return;
}
code = atkbd_compat_scancode(atkbd, code);
if (atkbd->emul && --atkbd->emul)
- goto out;
+ return;
keycode = atkbd->keycode[code];
@@ -564,8 +578,6 @@ static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data,
}
atkbd->release = false;
-out:
- return IRQ_HANDLED;
}
static int atkbd_set_repeat_rate(struct atkbd *atkbd)
@@ -1229,7 +1241,8 @@ static int atkbd_connect(struct serio *serio, struct serio_driver *drv)
goto fail1;
atkbd->dev = dev;
- ps2_init(&atkbd->ps2dev, serio);
+ ps2_init(&atkbd->ps2dev, serio,
+ atkbd_pre_receive_byte, atkbd_receive_byte);
INIT_DELAYED_WORK(&atkbd->event_work, atkbd_event_work);
mutex_init(&atkbd->mutex);
@@ -1385,7 +1398,7 @@ static struct serio_driver atkbd_drv = {
},
.description = DRIVER_DESC,
.id_table = atkbd_serio_ids,
- .interrupt = atkbd_interrupt,
+ .interrupt = ps2_interrupt,
.connect = atkbd_connect,
.reconnect = atkbd_reconnect,
.disconnect = atkbd_disconnect,
@@ -336,17 +336,14 @@ static void psmouse_handle_oob_data(struct psmouse *psmouse, u8 data)
}
}
-/*
- * psmouse_interrupt() handles incoming characters, either passing them
- * for normal processing or gathering them as command response.
- */
-static irqreturn_t psmouse_interrupt(struct serio *serio,
- u8 data, unsigned int flags)
+static enum ps2_disposition psmouse_pre_receive_byte(struct ps2dev *ps2dev,
+ u8 data,
+ unsigned int flags)
{
- struct psmouse *psmouse = psmouse_from_serio(serio);
+ struct psmouse *psmouse = container_of(ps2dev, struct psmouse, ps2dev);
if (psmouse->state == PSMOUSE_IGNORE)
- goto out;
+ return PS2_IGNORE;
if (unlikely((flags & SERIO_TIMEOUT) ||
((flags & SERIO_PARITY) &&
@@ -357,27 +354,25 @@ static irqreturn_t psmouse_interrupt(struct serio *serio,
"bad data from KBC -%s%s\n",
flags & SERIO_TIMEOUT ? " timeout" : "",
flags & SERIO_PARITY ? " bad parity" : "");
- ps2_cmd_aborted(&psmouse->ps2dev);
- goto out;
+ return PS2_ERROR;
}
if (flags & SERIO_OOB_DATA) {
psmouse_handle_oob_data(psmouse, data);
- goto out;
+ return PS2_IGNORE;
}
- if (unlikely(psmouse->ps2dev.flags & PS2_FLAG_ACK))
- if (ps2_handle_ack(&psmouse->ps2dev, data))
- goto out;
+ return PS2_PROCESS;
+}
- if (unlikely(psmouse->ps2dev.flags & PS2_FLAG_CMD))
- if (ps2_handle_response(&psmouse->ps2dev, data))
- goto out;
+static void psmouse_receive_byte(struct ps2dev *ps2dev, u8 data)
+{
+ struct psmouse *psmouse = container_of(ps2dev, struct psmouse, ps2dev);
- pm_wakeup_event(&serio->dev, 0);
+ pm_wakeup_event(&ps2dev->serio->dev, 0);
if (psmouse->state <= PSMOUSE_RESYNCING)
- goto out;
+ return;
if (psmouse->state == PSMOUSE_ACTIVATED &&
psmouse->pktcnt && time_after(jiffies, psmouse->last + HZ/2)) {
@@ -386,7 +381,7 @@ static irqreturn_t psmouse_interrupt(struct serio *serio,
psmouse->badbyte = psmouse->packet[0];
__psmouse_set_state(psmouse, PSMOUSE_RESYNCING);
psmouse_queue_work(psmouse, &psmouse->resync_work, 0);
- goto out;
+ return;
}
psmouse->packet[psmouse->pktcnt++] = data;
@@ -395,21 +390,21 @@ static irqreturn_t psmouse_interrupt(struct serio *serio,
if (unlikely(psmouse->packet[0] == PSMOUSE_RET_BAT && psmouse->pktcnt <= 2)) {
if (psmouse->pktcnt == 1) {
psmouse->last = jiffies;
- goto out;
+ return;
}
if (psmouse->packet[1] == PSMOUSE_RET_ID ||
(psmouse->protocol->type == PSMOUSE_HGPK &&
psmouse->packet[1] == PSMOUSE_RET_BAT)) {
__psmouse_set_state(psmouse, PSMOUSE_IGNORE);
- serio_reconnect(serio);
- goto out;
+ serio_reconnect(ps2dev->serio);
+ return;
}
/* Not a new device, try processing first byte normally */
psmouse->pktcnt = 1;
if (psmouse_handle_byte(psmouse))
- goto out;
+ return;
psmouse->packet[psmouse->pktcnt++] = data;
}
@@ -424,14 +419,11 @@ static irqreturn_t psmouse_interrupt(struct serio *serio,
psmouse->badbyte = psmouse->packet[0];
__psmouse_set_state(psmouse, PSMOUSE_RESYNCING);
psmouse_queue_work(psmouse, &psmouse->resync_work, 0);
- goto out;
+ return;
}
psmouse->last = jiffies;
psmouse_handle_byte(psmouse);
-
- out:
- return IRQ_HANDLED;
}
/*
@@ -1604,7 +1596,8 @@ static int psmouse_connect(struct serio *serio, struct serio_driver *drv)
if (!psmouse || !input_dev)
goto err_free;
- ps2_init(&psmouse->ps2dev, serio);
+ ps2_init(&psmouse->ps2dev, serio,
+ psmouse_pre_receive_byte, psmouse_receive_byte);
INIT_DELAYED_WORK(&psmouse->resync_work, psmouse_resync);
psmouse->dev = input_dev;
snprintf(psmouse->phys, sizeof(psmouse->phys), "%s/input0", serio->phys);
@@ -1786,7 +1779,7 @@ static struct serio_driver psmouse_drv = {
},
.description = DRIVER_DESC,
.id_table = psmouse_serio_ids,
- .interrupt = psmouse_interrupt,
+ .interrupt = ps2_interrupt,
.connect = psmouse_connect,
.reconnect = psmouse_reconnect,
.fast_reconnect = psmouse_fast_reconnect,
@@ -19,9 +19,22 @@
#define DRIVER_DESC "PS/2 driver library"
-MODULE_AUTHOR("Dmitry Torokhov <dtor@mail.ru>");
-MODULE_DESCRIPTION("PS/2 driver library");
-MODULE_LICENSE("GPL");
+#define PS2_CMD_SETSCALE11 0x00e6
+#define PS2_CMD_SETRES 0x10e8
+#define PS2_CMD_GETID 0x02f2
+#define PS2_CMD_RESET_BAT 0x02ff
+
+#define PS2_RET_BAT 0xaa
+#define PS2_RET_ID 0x00
+#define PS2_RET_ACK 0xfa
+#define PS2_RET_NAK 0xfe
+#define PS2_RET_ERR 0xfc
+
+#define PS2_FLAG_ACK BIT(0) /* Waiting for ACK/NAK */
+#define PS2_FLAG_CMD BIT(1) /* Waiting for a command to finish */
+#define PS2_FLAG_CMD1 BIT(2) /* Waiting for the first byte of command response */
+#define PS2_FLAG_WAITID BIT(3) /* Command executing is GET ID */
+#define PS2_FLAG_NAK BIT(4) /* Last transmission was NAKed */
static int ps2_do_sendbyte(struct ps2dev *ps2dev, u8 byte,
unsigned int timeout, unsigned int max_attempts)
@@ -76,14 +89,17 @@ static int ps2_do_sendbyte(struct ps2dev *ps2dev, u8 byte,
return error;
}
-/*
- * ps2_sendbyte() sends a byte to the device and waits for acknowledge.
- * It doesn't handle retransmission, the caller is expected to handle
+/**
+ * ps2_sendbyte - sends a byte to the device and wait for acknowledgement
+ * @ps2dev: a PS/2 device to send the data to
+ * @byte: data to be sent to the device
+ * @timeout: timeout for sending the data and receiving an acknowledge
+ *
+ * The function doesn't handle retransmission, the caller is expected to handle
* it when needed.
*
* ps2_sendbyte() can only be called from a process context.
*/
-
int ps2_sendbyte(struct ps2dev *ps2dev, u8 byte, unsigned int timeout)
{
int retval;
@@ -99,6 +115,13 @@ int ps2_sendbyte(struct ps2dev *ps2dev, u8 byte, unsigned int timeout)
}
EXPORT_SYMBOL(ps2_sendbyte);
+/**
+ * ps2_begin_command - mark beginning of execution of a complex command
+ * @ps2dev: a PS/2 device executing the command
+ *
+ * Serializes a complex/compound command. Once command is finished
+ * ps2_end_command() should be called.
+ */
void ps2_begin_command(struct ps2dev *ps2dev)
{
struct mutex *m = ps2dev->serio->ps2_cmd_mutex ?: &ps2dev->cmd_mutex;
@@ -107,6 +130,10 @@ void ps2_begin_command(struct ps2dev *ps2dev)
}
EXPORT_SYMBOL(ps2_begin_command);
+/**
+ * ps2_end_command - mark end of execution of a complex command
+ * @ps2dev: a PS/2 device executing the command
+ */
void ps2_end_command(struct ps2dev *ps2dev)
{
struct mutex *m = ps2dev->serio->ps2_cmd_mutex ?: &ps2dev->cmd_mutex;
@@ -115,11 +142,13 @@ void ps2_end_command(struct ps2dev *ps2dev)
}
EXPORT_SYMBOL(ps2_end_command);
-/*
- * ps2_drain() waits for device to transmit requested number of bytes
- * and discards them.
+/**
+ * ps2_drain - waits for device to transmit requested number of bytes
+ * and discards them
+ * @ps2dev: the PS/2 device that should be drained
+ * @maxbytes: maximum number of bytes to be drained
+ * @timeout: time to drain the device
*/
-
void ps2_drain(struct ps2dev *ps2dev, size_t maxbytes, unsigned int timeout)
{
if (maxbytes > sizeof(ps2dev->cmdbuf)) {
@@ -142,11 +171,11 @@ void ps2_drain(struct ps2dev *ps2dev, size_t maxbytes, unsigned int timeout)
}
EXPORT_SYMBOL(ps2_drain);
-/*
- * ps2_is_keyboard_id() checks received ID byte against the list of
- * known keyboard IDs.
+/**
+ * ps2_is_keyboard_id - checks received ID byte against the list of
+ * known keyboard IDs
+ * @id_byte: data byte that should be checked
*/
-
bool ps2_is_keyboard_id(u8 id_byte)
{
static const u8 keyboard_ids[] = {
@@ -167,7 +196,6 @@ EXPORT_SYMBOL(ps2_is_keyboard_id);
* response and tries to reduce remaining timeout to speed up command
* completion.
*/
-
static int ps2_adjust_timeout(struct ps2dev *ps2dev,
unsigned int command, unsigned int timeout)
{
@@ -217,13 +245,19 @@ static int ps2_adjust_timeout(struct ps2dev *ps2dev,
return timeout;
}
-/*
- * ps2_command() sends a command and its parameters to the mouse,
- * then waits for the response and puts it in the param array.
+/**
+ * __ps2_command - send a command to PS/2 device
+ * @ps2dev: the PS/2 device that should execute the command
+ * @param: a buffer containing parameters to be sent along with the command,
+ * or place where the results of the command execution will be deposited,
+ * or both
+ * @command: command word that encodes the command itself, as well as number of
+ * additional parameter bytes that should be sent to the device and expected
+ * length of the command response
*
- * ps2_command() can only be called from a process context
+ * Not serialized. Callers should use ps2_begin_command() and ps2_end_command()
+ * to ensure proper serialization for complex commands.
*/
-
int __ps2_command(struct ps2dev *ps2dev, u8 *param, unsigned int command)
{
unsigned int timeout;
@@ -327,6 +361,20 @@ int __ps2_command(struct ps2dev *ps2dev, u8 *param, unsigned int command)
}
EXPORT_SYMBOL(__ps2_command);
+/**
+ * ps2_command - send a command to PS/2 device
+ * @ps2dev: the PS/2 device that should execute the command
+ * @param: a buffer containing parameters to be sent along with the command,
+ * or place where the results of the command execution will be deposited,
+ * or both
+ * @command: command word that encodes the command itself, as well as number of
+ * additional parameter bytes that should be sent to the device and expected
+ * length of the command response
+ *
+ * Note: ps2_command() serializes the command execution so that only one
+ * command can be executed at a time for either individual port or the entire
+ * 8042 controller.
+ */
int ps2_command(struct ps2dev *ps2dev, u8 *param, unsigned int command)
{
int rc;
@@ -339,14 +387,16 @@ int ps2_command(struct ps2dev *ps2dev, u8 *param, unsigned int command)
}
EXPORT_SYMBOL(ps2_command);
-/*
- * ps2_sliced_command() sends an extended PS/2 command to the mouse
- * using sliced syntax, understood by advanced devices, such as Logitech
- * or Synaptics touchpads. The command is encoded as:
+/**
+ * ps2_sliced_command - sends an extended PS/2 command to a mouse
+ * @ps2dev: the PS/2 device that should execute the command
+ * @command: command byte
+ *
+ * The command is sent using "sliced" syntax understood by advanced devices,
+ * such as Logitech or Synaptics touchpads. The command is encoded as:
* 0xE6 0xE8 rr 0xE8 ss 0xE8 tt 0xE8 uu where (rr*64)+(ss*16)+(tt*4)+uu
* is the command.
*/
-
int ps2_sliced_command(struct ps2dev *ps2dev, u8 command)
{
int i;
@@ -372,12 +422,22 @@ int ps2_sliced_command(struct ps2dev *ps2dev, u8 command)
}
EXPORT_SYMBOL(ps2_sliced_command);
-/*
- * ps2_init() initializes ps2dev structure
+/**
+ * ps2_init - initializes ps2dev structure
+ * @ps2dev: structure to be initialized
+ * @serio: serio port associated with the PS/2 device
+ * @pre_receive_handler: validation handler to check basic communication state
+ * @receive_handler: main protocol handler
+ *
+ * Prepares ps2dev structure for use in drivers for PS/2 devices.
*/
-
-void ps2_init(struct ps2dev *ps2dev, struct serio *serio)
+void ps2_init(struct ps2dev *ps2dev, struct serio *serio,
+ ps2_pre_receive_handler_t pre_receive_handler,
+ ps2_receive_handler_t receive_handler)
{
+ ps2dev->pre_receive_handler = pre_receive_handler;
+ ps2dev->receive_handler = receive_handler;
+
mutex_init(&ps2dev->cmd_mutex);
lockdep_set_subclass(&ps2dev->cmd_mutex, serio->depth);
init_waitqueue_head(&ps2dev->wait);
@@ -387,11 +447,35 @@ void ps2_init(struct ps2dev *ps2dev, struct serio *serio)
EXPORT_SYMBOL(ps2_init);
/*
- * ps2_handle_ack() is supposed to be used in interrupt handler
- * to properly process ACK/NAK of a command from a PS/2 device.
+ * ps2_handle_response() stores device's response to a command and notifies
+ * the process waiting for completion of the command. Note that there is a
+ * distinction between waiting for the first byte of the response, and
+ * waiting for subsequent bytes. It is done so that callers could shorten
+ * timeouts once first byte of response is received.
*/
+static void ps2_handle_response(struct ps2dev *ps2dev, u8 data)
+{
+ if (ps2dev->cmdcnt)
+ ps2dev->cmdbuf[--ps2dev->cmdcnt] = data;
-bool ps2_handle_ack(struct ps2dev *ps2dev, u8 data)
+ if (ps2dev->flags & PS2_FLAG_CMD1) {
+ ps2dev->flags &= ~PS2_FLAG_CMD1;
+ if (ps2dev->cmdcnt)
+ wake_up(&ps2dev->wait);
+ }
+
+ if (!ps2dev->cmdcnt) {
+ ps2dev->flags &= ~PS2_FLAG_CMD;
+ wake_up(&ps2dev->wait);
+ }
+}
+
+/*
+ * ps2_handle_ack() processes ACK/NAK of a command from a PS/2 device,
+ * possibly applying workarounds for mice not acknowledging the "get ID"
+ * command.
+ */
+static void ps2_handle_ack(struct ps2dev *ps2dev, u8 data)
{
switch (data) {
case PS2_RET_ACK:
@@ -436,53 +520,25 @@ bool ps2_handle_ack(struct ps2dev *ps2dev, u8 data)
*/
dev_dbg(&ps2dev->serio->dev, "unexpected %#02x\n", data);
ps2dev->flags &= ~PS2_FLAG_WAITID;
- return true;
+ return;
}
if (!ps2dev->nak)
ps2dev->flags &= ~PS2_FLAG_NAK;
ps2dev->flags &= ~PS2_FLAG_ACK;
- wake_up(&ps2dev->wait);
if (!ps2dev->nak && data != PS2_RET_ACK)
ps2_handle_response(ps2dev, data);
-
- return true;
-}
-EXPORT_SYMBOL(ps2_handle_ack);
-
-/*
- * ps2_handle_response() is supposed to be used in interrupt handler
- * to properly store device's response to a command and notify process
- * waiting for completion of the command.
- */
-
-bool ps2_handle_response(struct ps2dev *ps2dev, u8 data)
-{
- if (ps2dev->cmdcnt)
- ps2dev->cmdbuf[--ps2dev->cmdcnt] = data;
-
- if (ps2dev->flags & PS2_FLAG_CMD1) {
- ps2dev->flags &= ~PS2_FLAG_CMD1;
- if (ps2dev->cmdcnt)
- wake_up(&ps2dev->wait);
- }
-
- if (!ps2dev->cmdcnt) {
- ps2dev->flags &= ~PS2_FLAG_CMD;
+ else
wake_up(&ps2dev->wait);
- }
-
- return true;
}
-EXPORT_SYMBOL(ps2_handle_response);
/*
* Clears state of PS/2 device after communication error by resetting majority
* of flags and waking up waiters, if any.
*/
-void ps2_cmd_aborted(struct ps2dev *ps2dev)
+static void ps2_cleanup(struct ps2dev *ps2dev)
{
unsigned long old_flags = ps2dev->flags;
@@ -494,6 +550,46 @@ void ps2_cmd_aborted(struct ps2dev *ps2dev)
if (old_flags & (PS2_FLAG_ACK | PS2_FLAG_CMD))
wake_up(&ps2dev->wait);
+}
+/**
+ * ps2_interrupt - common interrupt handler for PS/2 devices
+ * @serio: serio port for the device
+ * @data: a data byte received from the device
+ * @flags: flags such as %SERIO_PARITY or %SERIO_TIMEOUT indicating state of
+ * the data transfer
+ *
+ * ps2_interrupt() invokes pre-receive handler, optionally handles command
+ * acknowledgement and response from the device, and finally passes the data
+ * to the main protocol handler for future processing.
+ */
+irqreturn_t ps2_interrupt(struct serio *serio, u8 data, unsigned int flags) {
+ struct ps2dev *ps2dev = serio_get_drvdata(serio);
+ enum ps2_disposition rc;
+
+ rc = ps2dev->pre_receive_handler(ps2dev, data, flags);
+ switch (rc) {
+ case PS2_ERROR:
+ ps2_cleanup(ps2dev);
+ break;
+
+ case PS2_IGNORE:
+ break;
+
+ case PS2_PROCESS:
+ if (ps2dev->flags & PS2_FLAG_ACK)
+ ps2_handle_ack(ps2dev, data);
+ else if (ps2dev->flags & PS2_FLAG_CMD)
+ ps2_handle_response(ps2dev, data);
+ else
+ ps2dev->receive_handler(ps2dev, data);
+ break;
+ }
+
+ return IRQ_HANDLED;
}
-EXPORT_SYMBOL(ps2_cmd_aborted);
+EXPORT_SYMBOL(ps2_interrupt);
+
+MODULE_AUTHOR("Dmitry Torokhov <dtor@mail.ru>");
+MODULE_DESCRIPTION("PS/2 driver library");
+MODULE_LICENSE("GPL");
@@ -8,43 +8,59 @@
*/
#include <linux/bitops.h>
+#include <linux/interrupt.h>
#include <linux/mutex.h>
#include <linux/types.h>
#include <linux/wait.h>
-#define PS2_CMD_SETSCALE11 0x00e6
-#define PS2_CMD_SETRES 0x10e8
-#define PS2_CMD_GETID 0x02f2
-#define PS2_CMD_RESET_BAT 0x02ff
+struct ps2dev;
-#define PS2_RET_BAT 0xaa
-#define PS2_RET_ID 0x00
-#define PS2_RET_ACK 0xfa
-#define PS2_RET_NAK 0xfe
-#define PS2_RET_ERR 0xfc
+/**
+ * enum ps2_disposition - indicates how received byte should be handled
+ * @PS2_PROCESS: pass to the main protocol handler, process normally
+ * @PS2_IGNORE: skip the byte
+ * @PS2_ERROR: do not process the byte, abort command in progress
+ */
+enum ps2_disposition {
+ PS2_PROCESS,
+ PS2_IGNORE,
+ PS2_ERROR,
+};
-#define PS2_FLAG_ACK BIT(0) /* Waiting for ACK/NAK */
-#define PS2_FLAG_CMD BIT(1) /* Waiting for a command to finish */
-#define PS2_FLAG_CMD1 BIT(2) /* Waiting for the first byte of command response */
-#define PS2_FLAG_WAITID BIT(3) /* Command executing is GET ID */
-#define PS2_FLAG_NAK BIT(4) /* Last transmission was NAKed */
+typedef enum ps2_disposition (*ps2_pre_receive_handler_t)(struct ps2dev *, u8,
+ unsigned int);
+typedef void (*ps2_receive_handler_t)(struct ps2dev *, u8);
+/**
+ * struct ps2dev - represents a device using PS/2 protocol
+ * @serio: a serio port used by the PS/2 device
+ * @cmd_mutex: a mutex ensuring that only one command is executing at a time
+ * @wait: a waitqueue used to signal completion from the serio interrupt handler
+ * @flags: various internal flags indicating stages of PS/2 command execution
+ * @cmdbuf: buffer holding command response
+ * @cmdcnt: outstanding number of bytes of the command response
+ * @nak: a byte transmitted by the device when it refuses command
+ * @pre_receive_handler: checks communication errors and returns disposition
+ * (&enum ps2_disposition) of the received data byte
+ * @receive_handler: main handler of particular PS/2 protocol, such as keyboard
+ * or mouse protocol
+ */
struct ps2dev {
struct serio *serio;
-
- /* Ensures that only one command is executing at a time */
struct mutex cmd_mutex;
-
- /* Used to signal completion from interrupt handler */
wait_queue_head_t wait;
-
unsigned long flags;
u8 cmdbuf[8];
u8 cmdcnt;
u8 nak;
+
+ ps2_pre_receive_handler_t pre_receive_handler;
+ ps2_receive_handler_t receive_handler;
};
-void ps2_init(struct ps2dev *ps2dev, struct serio *serio);
+void ps2_init(struct ps2dev *ps2dev, struct serio *serio,
+ ps2_pre_receive_handler_t pre_receive_handler,
+ ps2_receive_handler_t receive_handler);
int ps2_sendbyte(struct ps2dev *ps2dev, u8 byte, unsigned int timeout);
void ps2_drain(struct ps2dev *ps2dev, size_t maxbytes, unsigned int timeout);
void ps2_begin_command(struct ps2dev *ps2dev);
@@ -52,9 +68,8 @@ void ps2_end_command(struct ps2dev *ps2dev);
int __ps2_command(struct ps2dev *ps2dev, u8 *param, unsigned int command);
int ps2_command(struct ps2dev *ps2dev, u8 *param, unsigned int command);
int ps2_sliced_command(struct ps2dev *ps2dev, u8 command);
-bool ps2_handle_ack(struct ps2dev *ps2dev, u8 data);
-bool ps2_handle_response(struct ps2dev *ps2dev, u8 data);
-void ps2_cmd_aborted(struct ps2dev *ps2dev);
bool ps2_is_keyboard_id(u8 id);
+irqreturn_t ps2_interrupt(struct serio *serio, u8 data, unsigned int flags);
+
#endif /* _LIBPS2_H */
Instead of exposing inner workings of libps2 to drivers such as atkbd and psmouse, have them define pre-receive and receive callbacks, and provide a common handler that can be used with underlying serio port. While at this add kerneldoc to the module. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> --- drivers/input/keyboard/atkbd.c | 81 +++++++------ drivers/input/mouse/psmouse-base.c | 53 ++++---- drivers/input/serio/libps2.c | 226 ++++++++++++++++++++++++++---------- include/linux/libps2.h | 61 ++++++---- 4 files changed, 269 insertions(+), 152 deletions(-)