Message ID | e4106d819bf15c1d35ea5dadebc354fd0f999f71.1475416202.git.ksenija.stanojevic@gmail.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On Sun, 02 Oct 2016, Ksenija Stanojevic wrote: > The bindings, which are now used in MFD, need also to be > documented in the MFD binding document. > > Signed-off-by: Ksenija Stanojevic <ksenija.stanojevic@gmail.com> > --- > Changes in v7: > - add to the patchset > > .../devicetree/bindings/iio/adc/mxs-lradc.txt | 47 ---------------------- > .../devicetree/bindings/mfd/mxs-lradc.txt | 47 ++++++++++++++++++++++ > 2 files changed, 47 insertions(+), 47 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/iio/adc/mxs-lradc.txt > create mode 100644 Documentation/devicetree/bindings/mfd/mxs-lradc.txt Please use -M when you create these kinds of patches. NB: I use -M all the time. It doesn't hurt in cases where it's not required. Please re-submit. > diff --git a/Documentation/devicetree/bindings/iio/adc/mxs-lradc.txt b/Documentation/devicetree/bindings/iio/adc/mxs-lradc.txt > deleted file mode 100644 > index 555fb11..0000000 > --- a/Documentation/devicetree/bindings/iio/adc/mxs-lradc.txt > +++ /dev/null > @@ -1,47 +0,0 @@ > -* Freescale MXS LRADC device driver > - > -Required properties: > -- compatible: Should be "fsl,imx23-lradc" for i.MX23 SoC and "fsl,imx28-lradc" > - for i.MX28 SoC > -- reg: Address and length of the register set for the device > -- interrupts: Should contain the LRADC interrupts > - > -Optional properties: > -- fsl,lradc-touchscreen-wires: Number of wires used to connect the touchscreen > - to LRADC. Valid value is either 4 or 5. If this > - property is not present, then the touchscreen is > - disabled. 5 wires is valid for i.MX28 SoC only. > -- fsl,ave-ctrl: number of samples per direction to calculate an average value. > - Allowed value is 1 ... 32, default is 4 > -- fsl,ave-delay: delay between consecutive samples. Allowed value is > - 2 ... 2048. It is used if 'fsl,ave-ctrl' > 1, counts at > - 2 kHz and its default is 2 (= 1 ms) > -- fsl,settling: delay between plate switch to next sample. Allowed value is > - 1 ... 2047. It counts at 2 kHz and its default is > - 10 (= 5 ms) > - > -Example for i.MX23 SoC: > - > - lradc@80050000 { > - compatible = "fsl,imx23-lradc"; > - reg = <0x80050000 0x2000>; > - interrupts = <36 37 38 39 40 41 42 43 44>; > - status = "okay"; > - fsl,lradc-touchscreen-wires = <4>; > - fsl,ave-ctrl = <4>; > - fsl,ave-delay = <2>; > - fsl,settling = <10>; > - }; > - > -Example for i.MX28 SoC: > - > - lradc@80050000 { > - compatible = "fsl,imx28-lradc"; > - reg = <0x80050000 0x2000>; > - interrupts = <10 14 15 16 17 18 19 20 21 22 23 24 25>; > - status = "okay"; > - fsl,lradc-touchscreen-wires = <5>; > - fsl,ave-ctrl = <4>; > - fsl,ave-delay = <2>; > - fsl,settling = <10>; > - }; > diff --git a/Documentation/devicetree/bindings/mfd/mxs-lradc.txt b/Documentation/devicetree/bindings/mfd/mxs-lradc.txt > new file mode 100644 > index 0000000..555fb11 > --- /dev/null > +++ b/Documentation/devicetree/bindings/mfd/mxs-lradc.txt > @@ -0,0 +1,47 @@ > +* Freescale MXS LRADC device driver > + > +Required properties: > +- compatible: Should be "fsl,imx23-lradc" for i.MX23 SoC and "fsl,imx28-lradc" > + for i.MX28 SoC > +- reg: Address and length of the register set for the device > +- interrupts: Should contain the LRADC interrupts > + > +Optional properties: > +- fsl,lradc-touchscreen-wires: Number of wires used to connect the touchscreen > + to LRADC. Valid value is either 4 or 5. If this > + property is not present, then the touchscreen is > + disabled. 5 wires is valid for i.MX28 SoC only. > +- fsl,ave-ctrl: number of samples per direction to calculate an average value. > + Allowed value is 1 ... 32, default is 4 > +- fsl,ave-delay: delay between consecutive samples. Allowed value is > + 2 ... 2048. It is used if 'fsl,ave-ctrl' > 1, counts at > + 2 kHz and its default is 2 (= 1 ms) > +- fsl,settling: delay between plate switch to next sample. Allowed value is > + 1 ... 2047. It counts at 2 kHz and its default is > + 10 (= 5 ms) > + > +Example for i.MX23 SoC: > + > + lradc@80050000 { > + compatible = "fsl,imx23-lradc"; > + reg = <0x80050000 0x2000>; > + interrupts = <36 37 38 39 40 41 42 43 44>; > + status = "okay"; > + fsl,lradc-touchscreen-wires = <4>; > + fsl,ave-ctrl = <4>; > + fsl,ave-delay = <2>; > + fsl,settling = <10>; > + }; > + > +Example for i.MX28 SoC: > + > + lradc@80050000 { > + compatible = "fsl,imx28-lradc"; > + reg = <0x80050000 0x2000>; > + interrupts = <10 14 15 16 17 18 19 20 21 22 23 24 25>; > + status = "okay"; > + fsl,lradc-touchscreen-wires = <5>; > + fsl,ave-ctrl = <4>; > + fsl,ave-delay = <2>; > + fsl,settling = <10>; > + };
diff --git a/Documentation/devicetree/bindings/iio/adc/mxs-lradc.txt b/Documentation/devicetree/bindings/iio/adc/mxs-lradc.txt deleted file mode 100644 index 555fb11..0000000 --- a/Documentation/devicetree/bindings/iio/adc/mxs-lradc.txt +++ /dev/null @@ -1,47 +0,0 @@ -* Freescale MXS LRADC device driver - -Required properties: -- compatible: Should be "fsl,imx23-lradc" for i.MX23 SoC and "fsl,imx28-lradc" - for i.MX28 SoC -- reg: Address and length of the register set for the device -- interrupts: Should contain the LRADC interrupts - -Optional properties: -- fsl,lradc-touchscreen-wires: Number of wires used to connect the touchscreen - to LRADC. Valid value is either 4 or 5. If this - property is not present, then the touchscreen is - disabled. 5 wires is valid for i.MX28 SoC only. -- fsl,ave-ctrl: number of samples per direction to calculate an average value. - Allowed value is 1 ... 32, default is 4 -- fsl,ave-delay: delay between consecutive samples. Allowed value is - 2 ... 2048. It is used if 'fsl,ave-ctrl' > 1, counts at - 2 kHz and its default is 2 (= 1 ms) -- fsl,settling: delay between plate switch to next sample. Allowed value is - 1 ... 2047. It counts at 2 kHz and its default is - 10 (= 5 ms) - -Example for i.MX23 SoC: - - lradc@80050000 { - compatible = "fsl,imx23-lradc"; - reg = <0x80050000 0x2000>; - interrupts = <36 37 38 39 40 41 42 43 44>; - status = "okay"; - fsl,lradc-touchscreen-wires = <4>; - fsl,ave-ctrl = <4>; - fsl,ave-delay = <2>; - fsl,settling = <10>; - }; - -Example for i.MX28 SoC: - - lradc@80050000 { - compatible = "fsl,imx28-lradc"; - reg = <0x80050000 0x2000>; - interrupts = <10 14 15 16 17 18 19 20 21 22 23 24 25>; - status = "okay"; - fsl,lradc-touchscreen-wires = <5>; - fsl,ave-ctrl = <4>; - fsl,ave-delay = <2>; - fsl,settling = <10>; - }; diff --git a/Documentation/devicetree/bindings/mfd/mxs-lradc.txt b/Documentation/devicetree/bindings/mfd/mxs-lradc.txt new file mode 100644 index 0000000..555fb11 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/mxs-lradc.txt @@ -0,0 +1,47 @@ +* Freescale MXS LRADC device driver + +Required properties: +- compatible: Should be "fsl,imx23-lradc" for i.MX23 SoC and "fsl,imx28-lradc" + for i.MX28 SoC +- reg: Address and length of the register set for the device +- interrupts: Should contain the LRADC interrupts + +Optional properties: +- fsl,lradc-touchscreen-wires: Number of wires used to connect the touchscreen + to LRADC. Valid value is either 4 or 5. If this + property is not present, then the touchscreen is + disabled. 5 wires is valid for i.MX28 SoC only. +- fsl,ave-ctrl: number of samples per direction to calculate an average value. + Allowed value is 1 ... 32, default is 4 +- fsl,ave-delay: delay between consecutive samples. Allowed value is + 2 ... 2048. It is used if 'fsl,ave-ctrl' > 1, counts at + 2 kHz and its default is 2 (= 1 ms) +- fsl,settling: delay between plate switch to next sample. Allowed value is + 1 ... 2047. It counts at 2 kHz and its default is + 10 (= 5 ms) + +Example for i.MX23 SoC: + + lradc@80050000 { + compatible = "fsl,imx23-lradc"; + reg = <0x80050000 0x2000>; + interrupts = <36 37 38 39 40 41 42 43 44>; + status = "okay"; + fsl,lradc-touchscreen-wires = <4>; + fsl,ave-ctrl = <4>; + fsl,ave-delay = <2>; + fsl,settling = <10>; + }; + +Example for i.MX28 SoC: + + lradc@80050000 { + compatible = "fsl,imx28-lradc"; + reg = <0x80050000 0x2000>; + interrupts = <10 14 15 16 17 18 19 20 21 22 23 24 25>; + status = "okay"; + fsl,lradc-touchscreen-wires = <5>; + fsl,ave-ctrl = <4>; + fsl,ave-delay = <2>; + fsl,settling = <10>; + };
The bindings, which are now used in MFD, need also to be documented in the MFD binding document. Signed-off-by: Ksenija Stanojevic <ksenija.stanojevic@gmail.com> --- Changes in v7: - add to the patchset .../devicetree/bindings/iio/adc/mxs-lradc.txt | 47 ---------------------- .../devicetree/bindings/mfd/mxs-lradc.txt | 47 ++++++++++++++++++++++ 2 files changed, 47 insertions(+), 47 deletions(-) delete mode 100644 Documentation/devicetree/bindings/iio/adc/mxs-lradc.txt create mode 100644 Documentation/devicetree/bindings/mfd/mxs-lradc.txt