@@ -210,7 +210,11 @@
#define OPAL_PCI_GET_PBCQ_TUNNEL_BAR 164
#define OPAL_PCI_SET_PBCQ_TUNNEL_BAR 165
#define OPAL_NX_COPROC_INIT 167
-#define OPAL_LAST 167
+#define OPAL_SECVAR_GET 170
+#define OPAL_SECVAR_GET_NEXT 171
+#define OPAL_SECVAR_ENQUEUE 172
+#define OPAL_SECVAR_INFO 173
+#define OPAL_LAST 173
#define QUIESCE_HOLD 1 /* Spin all calls at entry */
#define QUIESCE_REJECT 2 /* Fail all calls with OPAL_BUSY */
@@ -385,6 +385,16 @@ void opal_powercap_init(void);
void opal_psr_init(void);
void opal_sensor_groups_init(void);
+extern int opal_secvar_get(uint64_t name, uint64_t vendor, uint64_t attr,
+ uint64_t data_size, uint64_t data);
+extern int opal_secvar_get_next(uint64_t name_size, uint64_t name,
+ uint64_t vendor);
+extern int opal_secvar_enqueue(uint64_t name, uint64_t vendor, uint64_t attr,
+ uint64_t data_size, uint64_t data);
+extern int opal_secvar_info(uint64_t attr, uint64_t storage_space,
+ uint64_t remaining_space,
+ uint64_t max_variable_size);
+
#endif /* __ASSEMBLY__ */
#endif /* _ASM_POWERPC_OPAL_H */
@@ -326,4 +326,7 @@ config XILINX_PCI
bool "Xilinx PCI host bridge support"
depends on PCI && XILINX_VIRTEX
+config EFI
+ bool
+
endmenu
@@ -47,3 +47,12 @@ config PPC_VAS
VAS adapters are found in POWER9 based systems.
If unsure, say N.
+
+config OPAL_SECVAR
+ bool "OPAL Secure Variables"
+ depends on PPC_POWERNV && !CPU_BIG_ENDIAN
+ select UCS2_STRING
+ select EFI
+ help
+ This enables the kernel to access OPAL secure variables via EFI
+ runtime variable services.
@@ -16,3 +16,4 @@ obj-$(CONFIG_PERF_EVENTS) += opal-imc.o
obj-$(CONFIG_PPC_MEMTRACE) += memtrace.o
obj-$(CONFIG_PPC_VAS) += vas.o vas-window.o vas-debug.o
obj-$(CONFIG_OCXL_BASE) += ocxl.o
+obj-$(CONFIG_OPAL_SECVAR) += opal-secvar.o
@@ -282,3 +282,7 @@ OPAL_CALL(opal_pci_set_pbcq_tunnel_bar, OPAL_PCI_SET_PBCQ_TUNNEL_BAR);
OPAL_CALL(opal_sensor_read_u64, OPAL_SENSOR_READ_U64);
OPAL_CALL(opal_sensor_group_enable, OPAL_SENSOR_GROUP_ENABLE);
OPAL_CALL(opal_nx_coproc_init, OPAL_NX_COPROC_INIT);
+OPAL_CALL(opal_secvar_get, OPAL_SECVAR_GET);
+OPAL_CALL(opal_secvar_get_next, OPAL_SECVAR_GET_NEXT);
+OPAL_CALL(opal_secvar_enqueue, OPAL_SECVAR_ENQUEUE);
+OPAL_CALL(opal_secvar_info, OPAL_SECVAR_INFO)
new file mode 100644
@@ -0,0 +1,179 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * PowerNV code for secure variables
+ *
+ * Copyright (C) 2019 IBM Corporation
+ * Author: Claudio Carvalho <cclaudio@linux.ibm.com>
+ *
+ */
+#define pr_fmt(fmt) "secvar: "fmt
+
+#include <linux/efi.h>
+#include <asm/machdep.h>
+#include <asm/opal.h>
+
+static bool opal_secvar_supported;
+
+static efi_status_t opal_to_efi_status_log(int rc, const char *func_name)
+{
+ efi_status_t status;
+
+ switch (rc) {
+ case OPAL_EMPTY:
+ status = EFI_NOT_FOUND;
+ break;
+ case OPAL_HARDWARE:
+ status = EFI_DEVICE_ERROR;
+ break;
+ case OPAL_NO_MEM:
+ pr_err("%s: No space in the volatile storage\n", func_name);
+ status = EFI_OUT_OF_RESOURCES;
+ break;
+ case OPAL_PARAMETER:
+ status = EFI_INVALID_PARAMETER;
+ break;
+ case OPAL_PARTIAL:
+ status = EFI_BUFFER_TOO_SMALL;
+ break;
+ case OPAL_PERMISSION:
+ status = EFI_WRITE_PROTECTED;
+ break;
+ case OPAL_RESOURCE:
+ pr_err("%s: No space in the non-volatile storage\n", func_name);
+ status = EFI_OUT_OF_RESOURCES;
+ break;
+ case OPAL_SUCCESS:
+ status = EFI_SUCCESS;
+ break;
+ default:
+ pr_err("%s: Unknown OPAL error %d\n", func_name, rc);
+ status = EFI_DEVICE_ERROR;
+ break;
+ }
+
+ return status;
+}
+
+#define opal_to_efi_status(rc) opal_to_efi_status_log(rc, __func__)
+
+static efi_status_t
+opal_get_variable(efi_char16_t *name, efi_guid_t *vendor, u32 *attr,
+ unsigned long *data_size, void *data)
+{
+ int rc;
+
+ if (!opal_secvar_supported)
+ return EFI_UNSUPPORTED;
+
+ *data_size = cpu_to_be64(*data_size);
+
+ rc = opal_secvar_get(__pa(name), __pa(vendor), __pa(attr),
+ __pa(data_size), __pa(data));
+ /*
+ * The @attr is an optional output parameter. It is returned in
+ * big-endian.
+ */
+ if (attr)
+ *attr = be32_to_cpup(attr);
+ *data_size = be64_to_cpu(*data_size);
+
+ return opal_to_efi_status(rc);
+}
+
+static efi_status_t
+opal_get_next_variable(unsigned long *name_size, efi_char16_t *name,
+ efi_guid_t *vendor)
+{
+ int rc;
+
+ if (!opal_secvar_supported)
+ return EFI_UNSUPPORTED;
+
+ *name_size = cpu_to_be64(*name_size);
+
+ rc = opal_secvar_get_next(__pa(name_size), __pa(name),
+ __pa(vendor));
+
+ *name_size = be64_to_cpu(*name_size);
+
+ return opal_to_efi_status(rc);
+}
+
+static efi_status_t
+opal_set_variable(efi_char16_t *name, efi_guid_t *vendor, u32 attr,
+ unsigned long data_size, void *data)
+{
+ int rc;
+
+ if (!opal_secvar_supported)
+ return EFI_UNSUPPORTED;
+ /*
+ * The secure variable update must be enqueued in order to be processed
+ * in the next boot by firmware. The secure variable storage is write
+ * locked at runtime.
+ */
+ rc = opal_secvar_enqueue(__pa(name), __pa(vendor), attr,
+ data_size, __pa(data));
+ return opal_to_efi_status(rc);
+}
+
+static efi_status_t
+opal_query_variable_info(u32 attr, u64 *storage_space, u64 *remaining_space,
+ u64 *max_variable_size)
+{
+ int rc;
+
+ if (!opal_secvar_supported)
+ return EFI_UNSUPPORTED;
+
+ *storage_space = cpu_to_be64p(storage_space);
+ *remaining_space = cpu_to_be64p(remaining_space);
+ *max_variable_size = cpu_to_be64p(max_variable_size);
+
+ rc = opal_secvar_info(attr, __pa(storage_space), __pa(remaining_space),
+ __pa(max_variable_size));
+
+ *storage_space = be64_to_cpup(storage_space);
+ *remaining_space = be64_to_cpup(remaining_space);
+ *max_variable_size = be64_to_cpup(max_variable_size);
+
+ return opal_to_efi_status(rc);
+}
+
+static void pnv_efi_runtime_setup(void)
+{
+ /*
+ * The opal wrappers below treat the @name, @vendor, and @data
+ * parameters as little endian blobs.
+ * @name is a ucs2 string
+ * @vendor is the vendor GUID. It is converted to LE in the kernel
+ * @data variable data, which layout may be different for each variable
+ */
+ efi.get_variable = opal_get_variable;
+ efi.get_next_variable = opal_get_next_variable;
+ efi.set_variable = opal_set_variable;
+ efi.query_variable_info = opal_query_variable_info;
+
+ if (!opal_check_token(OPAL_SECVAR_GET) ||
+ !opal_check_token(OPAL_SECVAR_GET_NEXT) ||
+ !opal_check_token(OPAL_SECVAR_ENQUEUE) ||
+ !opal_check_token(OPAL_SECVAR_INFO)) {
+ pr_err("OPAL doesn't support secure variables\n");
+ opal_secvar_supported = false;
+ } else {
+ opal_secvar_supported = true;
+ }
+}
+
+static int __init pnv_efi_init(void)
+{
+ set_bit(EFI_RUNTIME_SERVICES, &efi.flags);
+ set_bit(EFI_BOOT, &efi.flags);
+
+ if (IS_ENABLED(CONFIG_64BIT))
+ set_bit(EFI_64BIT, &efi.flags);
+
+ pnv_efi_runtime_setup();
+ return 0;
+}
+machine_arch_initcall(powernv, pnv_efi_init);
The X.509 certificates trusted by the platform and other information required to secure boot the host OS kernel are wrapped in secure variables, which are controlled by OPAL. The OPAL secure variables can be handled through the following OPAL calls. OPAL_SECVAR_GET: Returns the data for a given secure variable name and vendor GUID. OPAL_SECVAR_GET_NEXT: For a given secure variable, it returns the name and vendor GUID of the next variable. OPAL_SECVAR_ENQUEUE: Enqueue the supplied secure variable update so that it can be processed by OPAL in the next boot. Variable updates cannot be be processed right away because the variable storage is write locked at runtime. OPAL_SECVAR_INFO: Returns size information about the variable. This patch adds support for OPAL secure variables by setting up the EFI runtime variable services to make OPAL calls. This patch also introduces CONFIG_OPAL_SECVAR for enabling the OPAL secure variables support in the kernel. Since CONFIG_OPAL_SECVAR selects CONFIG_EFI, it also allow us to manage the OPAL secure variables from userspace via efivarfs. Signed-off-by: Claudio Carvalho <cclaudio@linux.ibm.com> --- This patch depends on new OPAL calls that are being added to skiboot. The patch set that implements the new calls has been posted to https://patchwork.ozlabs.org/project/skiboot/list/?series=99805 --- arch/powerpc/include/asm/opal-api.h | 6 +- arch/powerpc/include/asm/opal.h | 10 ++ arch/powerpc/platforms/Kconfig | 3 + arch/powerpc/platforms/powernv/Kconfig | 9 + arch/powerpc/platforms/powernv/Makefile | 1 + arch/powerpc/platforms/powernv/opal-call.c | 4 + arch/powerpc/platforms/powernv/opal-secvar.c | 179 +++++++++++++++++++ 7 files changed, 211 insertions(+), 1 deletion(-) create mode 100644 arch/powerpc/platforms/powernv/opal-secvar.c