diff mbox series

[v5,2/7] tpm: tpm_tis: Add check_data handle to tpm_tis_phy_ops in order to check data integrity

Message ID 20200405125352.183693-3-amirmizi6@gmail.com (mailing list archive)
State New, archived
Headers show
Series [v5,1/7] tpm: tpm_tis: Make implementation of read16 read32 write32 optional | expand

Commit Message

Amir Mizinski April 5, 2020, 12:53 p.m. UTC
From: Amir Mizinski <amirmizi6@gmail.com>

In order to compute the crc over the data sent in lower layer
(I2C for instance), tpm_tis_check_data() calls an operation (if available)
to check data integrity. If data integrity cannot be verified, a retry
attempt to save the sent/received data is implemented.

The current steps are done when sending a command:
   1. Host writes to TPM_STS.commandReady.
   2. Host writes command.
   3. Host checks that TPM received data is valid.
   4. If data is currupted go to step 1.

When receiving data:
   1. Host checks that TPM_STS.dataAvail is set.
   2. Host saves received data.
   3. Host checks that received data is correct.
   4. If data is currupted Host writes to TPM_STS.responseRetry and go to
      step 1.

Co-developed-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Amir Mizinski <amirmizi6@gmail.com>
---
 drivers/char/tpm/tpm_tis_core.c | 102 +++++++++++++++++++++++++---------------
 drivers/char/tpm/tpm_tis_core.h |   3 ++
 2 files changed, 67 insertions(+), 38 deletions(-)

Comments

Jarkko Sakkinen April 6, 2020, 6:28 p.m. UTC | #1
Short summary could just be:

"Add check_data handle() to struct tpm_tis_phy_ops"

and leave the reasoning to the long description.

On Sun, Apr 05, 2020 at 03:53:47PM +0300, amirmizi6@gmail.com wrote:
> From: Amir Mizinski <amirmizi6@gmail.com>
> 
> In order to compute the crc over the data sent in lower layer
> (I2C for instance), tpm_tis_check_data() calls an operation (if available)
> to check data integrity. If data integrity cannot be verified, a retry
> attempt to save the sent/received data is implemented.

It does not. The existing code does not do that.

Also it is not clear whether the steps are from existing code or
after this commit has been applied.

/Jarkko
diff mbox series

Patch

diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/tpm_tis_core.c
index 27c6ca0..6c4f232 100644
--- a/drivers/char/tpm/tpm_tis_core.c
+++ b/drivers/char/tpm/tpm_tis_core.c
@@ -242,6 +242,15 @@  static u8 tpm_tis_status(struct tpm_chip *chip)
 	return status;
 }
 
+static bool tpm_tis_check_data(struct tpm_chip *chip, const u8 *buf, size_t len)
+{
+	struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
+
+	if (priv->phy_ops->check_data)
+		return priv->phy_ops->check_data(priv, buf, len);
+	return true;
+}
+
 static void tpm_tis_ready(struct tpm_chip *chip)
 {
 	struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
@@ -308,47 +317,59 @@  static int tpm_tis_recv(struct tpm_chip *chip, u8 *buf, size_t count)
 {
 	struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
 	int size = 0;
-	int status;
+	int status, i;
 	u32 expected;
+	bool check_data = false;
 
-	if (count < TPM_HEADER_SIZE) {
-		size = -EIO;
-		goto out;
-	}
+	for (i = 0; i < TPM_RETRY; i++) {
+		if (count < TPM_HEADER_SIZE) {
+			size = -EIO;
+			goto out;
+		}
 
-	size = recv_data(chip, buf, TPM_HEADER_SIZE);
-	/* read first 10 bytes, including tag, paramsize, and result */
-	if (size < TPM_HEADER_SIZE) {
-		dev_err(&chip->dev, "Unable to read header\n");
-		goto out;
-	}
+		size = recv_data(chip, buf, TPM_HEADER_SIZE);
+		/* read first 10 bytes, including tag, paramsize, and result */
+		if (size < TPM_HEADER_SIZE) {
+			dev_err(&chip->dev, "Unable to read header\n");
+			goto out;
+		}
 
-	expected = be32_to_cpu(*(__be32 *) (buf + 2));
-	if (expected > count || expected < TPM_HEADER_SIZE) {
-		size = -EIO;
-		goto out;
-	}
+		expected = be32_to_cpu(*(__be32 *) (buf + 2));
+		if (expected > count || expected < TPM_HEADER_SIZE) {
+			size = -EIO;
+			goto out;
+		}
 
-	size += recv_data(chip, &buf[TPM_HEADER_SIZE],
-			  expected - TPM_HEADER_SIZE);
-	if (size < expected) {
-		dev_err(&chip->dev, "Unable to read remainder of result\n");
-		size = -ETIME;
-		goto out;
-	}
+		size += recv_data(chip, &buf[TPM_HEADER_SIZE],
+				  expected - TPM_HEADER_SIZE);
+		if (size < expected) {
+			dev_err(&chip->dev, "Unable to read remainder of result\n");
+			size = -ETIME;
+			goto out;
+		}
 
-	if (wait_for_tpm_stat(chip, TPM_STS_VALID, chip->timeout_c,
-				&priv->int_queue, false) < 0) {
-		size = -ETIME;
-		goto out;
+		if (wait_for_tpm_stat(chip, TPM_STS_VALID, chip->timeout_c,
+				      &priv->int_queue, false) < 0) {
+			size = -ETIME;
+			goto out;
+		}
+
+		status = tpm_tis_status(chip);
+		if (status & TPM_STS_DATA_AVAIL) {	/* retry? */
+			dev_err(&chip->dev, "Error left over data\n");
+			size = -EIO;
+			goto out;
+		}
+
+		check_data = tpm_tis_check_data(chip, buf, size);
+		if (!check_data)
+			tpm_tis_write8(priv, TPM_STS(priv->locality),
+				       TPM_STS_RESPONSE_RETRY);
+		else
+			break;
 	}
-	status = tpm_tis_status(chip);
-	if (status & TPM_STS_DATA_AVAIL) {	/* retry? */
-		dev_err(&chip->dev, "Error left over data\n");
+	if (!check_data)
 		size = -EIO;
-		goto out;
-	}
-
 out:
 	tpm_tis_ready(chip);
 	return size;
@@ -453,14 +474,19 @@  static void disable_interrupts(struct tpm_chip *chip)
 static int tpm_tis_send_main(struct tpm_chip *chip, const u8 *buf, size_t len)
 {
 	struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
-	int rc;
+	int rc, i;
 	u32 ordinal;
 	unsigned long dur;
+	bool data_valid = false;
 
-	rc = tpm_tis_send_data(chip, buf, len);
-	if (rc < 0)
-		return rc;
-
+	for (i = 0; i < TPM_RETRY && !data_valid; i++) {
+		rc = tpm_tis_send_data(chip, buf, len);
+		if (rc < 0)
+			return rc;
+		data_valid = tpm_tis_check_data(chip, buf, len);
+	}
+	if (!data_valid)
+		return -EIO;
 	/* go and do it */
 	rc = tpm_tis_write8(priv, TPM_STS(priv->locality), TPM_STS_GO);
 	if (rc < 0)
diff --git a/drivers/char/tpm/tpm_tis_core.h b/drivers/char/tpm/tpm_tis_core.h
index d06c65b..486c2e9 100644
--- a/drivers/char/tpm/tpm_tis_core.h
+++ b/drivers/char/tpm/tpm_tis_core.h
@@ -34,6 +34,7 @@  enum tis_status {
 	TPM_STS_GO = 0x20,
 	TPM_STS_DATA_AVAIL = 0x10,
 	TPM_STS_DATA_EXPECT = 0x08,
+	TPM_STS_RESPONSE_RETRY = 0x02,
 };
 
 enum tis_int_flags {
@@ -106,6 +107,8 @@  struct tpm_tis_phy_ops {
 	int (*read16)(struct tpm_tis_data *data, u32 addr, u16 *result);
 	int (*read32)(struct tpm_tis_data *data, u32 addr, u32 *result);
 	int (*write32)(struct tpm_tis_data *data, u32 addr, u32 src);
+	bool (*check_data)(struct tpm_tis_data *data, const u8 *buf,
+			   size_t len);
 };
 
 static inline int tpm_tis_read_bytes(struct tpm_tis_data *data, u32 addr,