@@ -21,7 +21,7 @@ missing
compile
libtool
ltmain.sh
-
+test-driver
# Compiled executables
*.o
@@ -1,4 +1,4 @@
-SUBDIRS = src
+SUBDIRS = src tests
dist_man_MANS = evmctl.1
doc_DATA = examples/ima-genkey-self.sh examples/ima-genkey.sh examples/ima-gen-local-ca.sh
@@ -72,6 +72,7 @@ EVMCTL_MANPAGE_DOCBOOK_XSL
AC_CONFIG_FILES([Makefile
src/Makefile
+ tests/Makefile
packaging/ima-evm-utils.spec
])
AC_OUTPUT
new file mode 100644
@@ -0,0 +1,16 @@
+# Generated by test driver
+*.log
+*.trs
+
+# Generated by tests
+*.txt
+*.out
+*.sig
+*.sig2
+
+# Generated certs and keys (by gen-keys.sh)
+*.cer
+*.pub
+*.key
+*.conf
+
new file mode 100644
@@ -0,0 +1,7 @@
+check_SCRIPTS =
+TESTS = $(check_SCRIPTS)
+
+check_SCRIPTS += ima_hash.test
+
+clean-local:
+ -rm -f *.txt *.out *.sig *.sig2
new file mode 100755
@@ -0,0 +1,274 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# ima-evm-utils tests bash functions
+#
+# Copyright (C) 2020 Vitaly Chikunov <vt@altlinux.org>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# Tests accounting
+declare -i testspass=0 testsfail=0 testsskip=0
+
+# Exit codes (compatible with automake)
+declare -r OK=0
+declare -r FAIL=1
+declare -r HARDFAIL=99 # hard failure no matter testing mode
+declare -r SKIP=77
+
+# You can set env VERBOSE=1 to see more output from evmctl
+VERBOSE=${VERBOSE:-0}
+V=vvvv
+V=${V:0:$VERBOSE}
+V=${V:+-$V}
+
+# Exit if env FAILEARLY is defined.
+# Used in expect_{pass,fail}.
+exit_early() {
+ if [ "$FAILEARLY" ]; then
+ exit "$1"
+ fi
+}
+
+# Require particular executables to be present
+_require() {
+ ret=
+ for i; do
+ if ! type $i; then
+ echo "$i is required for test"
+ ret=1
+ fi
+ done
+ [ $ret ] && exit "$HARDFAIL"
+}
+
+# Non-TTY output is never colored
+if [ -t 1 ]; then
+ RED=$'\e[1;31m'
+ GREEN=$'\e[1;32m'
+ YELLOW=$'\e[1;33m'
+ BLUE=$'\e[1;34m'
+ CYAN=$'\e[1;36m'
+ NORM=$'\e[m'
+ export RED GREEN YELLOW BLUE CYAN NORM
+fi
+
+# Test mode determined by TFAIL variable:
+# undefined: to success testing
+# defined: failure testing
+TFAIL=
+TMODE=+ # mode character to prepend running command in log
+declare -i TNESTED=0 # just for sanity checking
+
+# Run positive test (one that should pass) and account its result
+expect_pass() {
+ local -i ret
+
+ if [ $TNESTED -gt 0 ]; then
+ echo $RED"expect_pass should not be run nested"$NORM
+ testsfail+=1
+ exit "$HARDFAIL"
+ fi
+ TFAIL=
+ TMODE=+
+ TNESTED+=1
+ [ "$VERBOSE" -gt 1 ] && echo "____ START positive test: $*"
+ "$@"
+ ret=$?
+ [ "$VERBOSE" -gt 1 ] && echo "^^^^ STOP ($ret) positive test: $*"
+ TNESTED+=-1
+ case $ret in
+ 0) testspass+=1 ;;
+ 77) testsskip+=1 ;;
+ 99) testsfail+=1; exit_early 1 ;;
+ *) testsfail+=1; exit_early 2 ;;
+ esac
+ return $ret
+}
+
+# Eval negative test (one that should fail) and account its result
+expect_fail() {
+ local ret
+
+ if [ $TNESTED -gt 0 ]; then
+ echo $RED"expect_fail should not be run nested"$NORM
+ testsfail+=1
+ exit "$HARDFAIL"
+ fi
+
+ TFAIL=yes
+ TMODE=-
+ TNESTED+=1
+ [ "$VERBOSE" -gt 1 ] && echo "____ START negative test: $*"
+ "$@"
+ ret=$?
+ [ "$VERBOSE" -gt 1 ] && echo "^^^^ STOP ($ret) negative test: $*"
+ TNESTED+=-1
+ case $ret in
+ 0) testsfail+=1; exit_early 3 ;;
+ 77) testsskip+=1 ;;
+ 99) testsfail+=1; exit_early 4 ;;
+ *) testspass+=1 ;;
+ esac
+ # Restore defaults (as in positive tests)
+ # for tests to run without wrappers
+ TFAIL=
+ TMODE=+
+ return $ret
+}
+
+# return true if current test is positive
+_test_expected_to_pass() {
+ [ ! $TFAIL ]
+}
+
+# return true if current test is negative
+_test_expected_to_fail() {
+ [ $TFAIL ]
+}
+
+# Show blank line and color following text to red
+# if it's real error (ie we are in expect_pass mode).
+color_red_on_failure() {
+ if _test_expected_to_pass; then
+ echo "$RED"
+ COLOR_RESTORE=true
+ fi
+}
+
+# For hard errors
+color_red() {
+ echo "$RED"
+ COLOR_RESTORE=true
+}
+
+color_restore() {
+ [ $COLOR_RESTORE ] && echo "$NORM"
+ COLOR_RESTORE=
+}
+
+ADD_DEL=
+ADD_TEXT_FOR=
+# _evmctl_run should be run as `_evmctl_run ... || return'
+_evmctl_run() {
+ local op=$1 out=$1-$$.out
+ local text_for=${FOR:+for $ADD_TEXT_FOR}
+ # Additional parameters:
+ # ADD_DEL: additional files to rm on failure
+ # ADD_TEXT_FOR: append to text as 'for $ADD_TEXT_FOR'
+
+ cmd="evmctl $V $EVMCTL_ENGINE $*"
+ echo $YELLOW$TMODE "$cmd"$NORM
+ $cmd >"$out" 2>&1
+ ret=$?
+
+ # Shell special and signal exit codes (except 255)
+ if [ $ret -ge 126 ] && [ $ret -lt 255 ]; then
+ color_red
+ echo "evmctl $op failed hard with ($ret) $text_for"
+ sed 's/^/ /' "$out"
+ color_restore
+ rm "$out" $ADD_DEL
+ ADD_DEL=
+ ADD_TEXT_FOR=
+ return "$HARDFAIL"
+ elif [ $ret -gt 0 ]; then
+ color_red_on_failure
+ echo "evmctl $op failed" ${TFAIL:+properly} "with ($ret) $text_for"
+ # Show evmctl output only in verbose mode or if real failure.
+ if _test_expected_to_pass || [ "$VERBOSE" ]; then
+ sed 's/^/ /' "$out"
+ fi
+ color_restore
+ rm "$out" $ADD_DEL
+ ADD_DEL=
+ ADD_TEXT_FOR=
+ return "$FAIL"
+ elif _test_expected_to_fail; then
+ color_red
+ echo "evmctl $op wrongly succeeded $text_for"
+ sed 's/^/ /' "$out"
+ color_restore
+ else
+ [ "$VERBOSE" ] && sed 's/^/ /' "$out"
+ fi
+ rm "$out"
+ ADD_DEL=
+ ADD_TEXT_FOR=
+ return "$OK"
+}
+
+# Extract xattr $attr from $file into $out file skipping $pref'ix
+_extract_xattr() {
+ local file=$1 attr=$2 out=$3 pref=$4
+
+ getfattr -n "$attr" -e hex "$file" \
+ | grep "^$attr=" \
+ | sed "s/^$attr=$pref//" \
+ | xxd -r -p > "$out"
+}
+
+# Test if xattr $attr in $file matches $prefix
+# Show error and fail otherwise.
+_test_xattr() {
+ local file=$1 attr=$2 prefix=$3
+ local text_for=${ADD_TEXT_FOR:+ for $ADD_TEXT_FOR}
+
+ if ! getfattr -n "$attr" -e hex "$file" | egrep -qx "$attr=$prefix"; then
+ color_red_on_failure
+ echo "Did not find expected hash$text_for:"
+ echo " $attr=$prefix"
+ echo ""
+ echo "Actual output below:"
+ getfattr -n "$attr" -e hex "$file" | sed 's/^/ /'
+ color_restore
+ rm "$file"
+ ADD_TEXT_FOR=
+ return "$FAIL"
+ fi
+ ADD_TEXT_FOR=
+}
+
+# Try to enable gost-engine if needed.
+_enable_gost_engine() {
+ # Do not enable if it's already working (enabled by user)
+ if ! openssl md_gost12_256 /dev/null >/dev/null 2>&1 \
+ && openssl engine gost >/dev/null 2>&1; then
+ export EVMCTL_ENGINE="--engine gost"
+ export OPENSSL_ENGINE="-engine gost"
+ fi
+}
+
+# Show test stats and exit into automake test system
+# with proper exit code (same as ours).
+_report_exit() {
+ if [ $testsfail -gt 0 ]; then
+ echo "================================="
+ echo " Run with FAILEARLY=1 $0 $*"
+ echo " To stop after first failure"
+ echo "================================="
+ fi
+ [ $testspass -gt 0 ] && echo -n "$GREEN" || echo -n "$NORM"
+ echo -n "PASS: $testspass"
+ [ $testsskip -gt 0 ] && echo -n "$YELLOW" || echo -n "$NORM"
+ echo -n " SKIP: $testsskip"
+ [ $testsfail -gt 0 ] && echo -n "$RED" || echo -n "$NORM"
+ echo " FAIL: $testsfail"
+ echo "$NORM"
+ if [ $testsfail -gt 0 ]; then
+ exit "$FAIL"
+ elif [ $testspass -gt 0 ]; then
+ exit "$OK"
+ else
+ exit "$SKIP"
+ fi
+}
+
new file mode 100755
@@ -0,0 +1,80 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# evmctl ima_hash tests
+#
+# Copyright (C) 2020 Vitaly Chikunov <vt@altlinux.org>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+cd "$(dirname "$0")" || exit 1
+PATH=../src:$PATH
+source ./functions.sh
+_require evmctl openssl getfattr
+
+trap _report_exit EXIT
+set -f # disable globbing
+
+check() {
+ local alg=$1 prefix=$2 chash=$3 hash
+ local file=$alg-hash.txt
+
+ rm -f "$file"
+ touch "$file"
+ # Generate hash with openssl, if it failed skip test,
+ # unless it's negative test, then pass to evmctl
+ cmd="openssl dgst $OPENSSL_ENGINE -$alg $file"
+ echo - "$cmd"
+ hash=$(set -o pipefail; $cmd 2>/dev/null | cut -d' ' -f2)
+ if [ $? -ne 0 ] && _test_expected_to_pass; then
+ echo "${CYAN}$alg test is skipped$NORM"
+ rm "$file"
+ return "$SKIP"
+ fi
+ if [ "$chash" ] && [ "$chash" != "$hash" ]; then
+ color_red
+ echo "Invalid hash for $alg from openssl"
+ echo "Expected: $chash"
+ echo "Returned: $hash"
+ color_restore
+ rm "$file"
+ return "$HARDFAIL"
+ fi
+
+ ADD_TEXT_FOR=$alg ADD_DEL=$file \
+ _evmctl_run ima_hash --hashalgo "$alg" --xattr-user "$file" || return
+ ADD_TEXT_FOR=$alg \
+ _test_xattr "$file" user.ima "$prefix$hash" || return
+ rm "$file"
+ return "$OK"
+}
+
+# check args: algo hdr-prefix canonic-hash
+expect_pass check md4 0x01 31d6cfe0d16ae931b73c59d7e0c089c0
+expect_pass check md5 0x01 d41d8cd98f00b204e9800998ecf8427e
+expect_pass check sha1 0x01 da39a3ee5e6b4b0d3255bfef95601890afd80709
+expect_fail check SHA1 0x01 # uppercase
+expect_fail check sha512-224 0x01 # valid for pkcs1
+expect_fail check sha512-256 0x01 # valid for pkcs1
+expect_fail check unknown 0x01 # nonexistent
+expect_pass check sha224 0x0407 d14a028c2a3a2bc9476102bb288234c415a2b01f828ea62ac5b3e42f
+expect_pass check sha256 0x0404 e3b0c44298fc1c149afbf4c8996fb92427ae41e4649b934ca495991b7852b855
+expect_pass check sha384 0x0405 38b060a751ac96384cd9327eb1b1e36a21fdb71114be07434c0cc7bf63f6e1da274edebfe76f65fbd51ad2f14898b95b
+expect_pass check sha512 0x0406 cf83e1357eefb8bdf1542850d66d8007d620e4050b5715dc83f4a921d36ce9ce47d0d13c5d85f2b0ff8318d2877eec2f63b931bd47417a81a538327af927da3e
+expect_pass check rmd160 0x0403 9c1185a5c5e9fc54612808977ee8f548b2258d31
+expect_fail check sm3 0x01
+expect_fail check sm3-256 0x01
+_enable_gost_engine
+expect_pass check md_gost12_256 0x0412 3f539a213e97c802cc229d474c6aa32a825a360b2a933a949fd925208d9ce1bb
+expect_pass check streebog256 0x0412 3f539a213e97c802cc229d474c6aa32a825a360b2a933a949fd925208d9ce1bb
+expect_pass check md_gost12_512 0x0413 8e945da209aa869f0455928529bcae4679e9873ab707b55315f56ceb98bef0a7362f715528356ee83cda5f2aac4c6ad2ba3a715c1bcd81cb8e9f90bf4c1c1a8a
+expect_pass check streebog512 0x0413 8e945da209aa869f0455928529bcae4679e9873ab707b55315f56ceb98bef0a7362f715528356ee83cda5f2aac4c6ad2ba3a715c1bcd81cb8e9f90bf4c1c1a8a
+
Run `make check' to execute the tests. This commit only adds ima_hash test. Signed-off-by: Vitaly Chikunov <vt@altlinux.org> --- .gitignore | 2 +- Makefile.am | 2 +- configure.ac | 1 + tests/.gitignore | 16 +++ tests/Makefile.am | 7 ++ tests/functions.sh | 274 ++++++++++++++++++++++++++++++++++++++++++++++++++++ tests/ima_hash.test | 80 +++++++++++++++ 7 files changed, 380 insertions(+), 2 deletions(-) create mode 100644 tests/.gitignore create mode 100644 tests/Makefile.am create mode 100755 tests/functions.sh create mode 100755 tests/ima_hash.test