| Message ID | 20210114191522.4001-1-nramas@linux.microsoft.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | selinux: include a consumer of the new IMA critical data hook | expand |
On Thu, Jan 14, 2021 at 2:15 PM Lakshmi Ramasubramanian <nramas@linux.microsoft.com> wrote: > > SELinux stores the active policy in memory, so the changes to this data > at runtime would have an impact on the security guarantees provided > by SELinux. Measuring in-memory SELinux policy through IMA subsystem > provides a secure way for the attestation service to remotely validate > the policy contents at runtime. > > Measure the hash of the loaded policy by calling the IMA hook > ima_measure_critical_data(). Since the size of the loaded policy > can be large (several MB), measure the hash of the policy instead of > the entire policy to avoid bloating the IMA log entry. > > To enable SELinux data measurement, the following steps are required: > > 1, Add "ima_policy=critical_data" to the kernel command line arguments > to enable measuring SELinux data at boot time. > For example, > BOOT_IMAGE=/boot/vmlinuz-5.10.0-rc1+ root=UUID=fd643309-a5d2-4ed3-b10d-3c579a5fab2f ro nomodeset security=selinux ima_policy=critical_data > > 2, Add the following rule to /etc/ima/ima-policy > measure func=CRITICAL_DATA label=selinux > > Sample measurement of the hash of SELinux policy: > > To verify the measured data with the current SELinux policy run > the following commands and verify the output hash values match. > > sha256sum /sys/fs/selinux/policy | cut -d' ' -f 1 > > grep "selinux-policy-hash" /sys/kernel/security/integrity/ima/ascii_runtime_measurements | tail -1 | cut -d' ' -f 6 > > Note that the actual verification of SELinux policy would require loading > the expected policy into an identical kernel on a pristine/known-safe > system and run the sha256sum /sys/kernel/selinux/policy there to get > the expected hash. > > Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> > Suggested-by: Stephen Smalley <stephen.smalley.work@gmail.com> > Acked-by: Paul Moore <paul@paul-moore.com> > Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com> > --- > Documentation/ABI/testing/ima_policy | 3 +- > security/selinux/Makefile | 2 + > security/selinux/ima.c | 44 +++++++++++++++++++ > security/selinux/include/ima.h | 24 +++++++++++ > security/selinux/include/security.h | 3 +- > security/selinux/ss/services.c | 64 ++++++++++++++++++++++++---- > 6 files changed, 129 insertions(+), 11 deletions(-) > create mode 100644 security/selinux/ima.c > create mode 100644 security/selinux/include/ima.h I think this has changed enough that keeping the "Acked-by" and "Reviewed-by" tags is probably not a good choice. I took a quick look and this still looks okay from a SELinux perspective, I'll leave Mimi to comment on it from a IMA perspective. Unless Tyler has reviewed this version prior to your posting, it might be a good idea to remove his "Reviewed-by" unless he has a chance to look this over again before it is merged. > diff --git a/Documentation/ABI/testing/ima_policy b/Documentation/ABI/testing/ima_policy > index 54fe1c15ed50..8365596cb42b 100644 > --- a/Documentation/ABI/testing/ima_policy > +++ b/Documentation/ABI/testing/ima_policy > @@ -52,8 +52,9 @@ Description: > template:= name of a defined IMA template type > (eg, ima-ng). Only valid when action is "measure". > pcr:= decimal value > - label:= [data_label] > + label:= [selinux]|[data_label] > data_label:= a unique string used for grouping and limiting critical data. > + For example, "selinux" to measure critical data for SELinux. > > default policy: > # PROC_SUPER_MAGIC > diff --git a/security/selinux/Makefile b/security/selinux/Makefile > index 4d8e0e8adf0b..776162444882 100644 > --- a/security/selinux/Makefile > +++ b/security/selinux/Makefile > @@ -16,6 +16,8 @@ selinux-$(CONFIG_NETLABEL) += netlabel.o > > selinux-$(CONFIG_SECURITY_INFINIBAND) += ibpkey.o > > +selinux-$(CONFIG_IMA) += ima.o > + > ccflags-y := -I$(srctree)/security/selinux -I$(srctree)/security/selinux/include > > $(addprefix $(obj)/,$(selinux-y)): $(obj)/flask.h > diff --git a/security/selinux/ima.c b/security/selinux/ima.c > new file mode 100644 > index 000000000000..03715893ff97 > --- /dev/null > +++ b/security/selinux/ima.c > @@ -0,0 +1,44 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * Copyright (C) 2021 Microsoft Corporation > + * > + * Author: Lakshmi Ramasubramanian (nramas@linux.microsoft.com) > + * > + * Measure critical data structures maintainted by SELinux > + * using IMA subsystem. > + */ > +#include <linux/vmalloc.h> > +#include <linux/ima.h> > +#include "security.h" > +#include "ima.h" > + > +/* > + * selinux_ima_measure_state - Measure hash of the SELinux policy > + * > + * @state: selinux state struct > + * > + * NOTE: This function must be called with policy_mutex held. > + */ > +void selinux_ima_measure_state(struct selinux_state *state) > +{ > + void *policy = NULL; > + size_t policy_len; > + int rc = 0; > + > + /* > + * Measure SELinux policy only after initialization is completed. > + */ > + if (!selinux_initialized(state)) > + return; > + > + rc = security_read_state_kernel(state, &policy, &policy_len); > + if (rc) { > + pr_err("SELinux: %s: failed to read policy %d.\n", __func__, rc); > + return; > + } > + > + ima_measure_critical_data("selinux", "selinux-policy-hash", > + policy, policy_len, true); > + > + vfree(policy); > +} > diff --git a/security/selinux/include/ima.h b/security/selinux/include/ima.h > new file mode 100644 > index 000000000000..d69c36611423 > --- /dev/null > +++ b/security/selinux/include/ima.h > @@ -0,0 +1,24 @@ > +/* SPDX-License-Identifier: GPL-2.0+ */ > +/* > + * Copyright (C) 2021 Microsoft Corporation > + * > + * Author: Lakshmi Ramasubramanian (nramas@linux.microsoft.com) > + * > + * Measure critical data structures maintainted by SELinux > + * using IMA subsystem. > + */ > + > +#ifndef _SELINUX_IMA_H_ > +#define _SELINUX_IMA_H_ > + > +#include "security.h" > + > +#ifdef CONFIG_IMA > +extern void selinux_ima_measure_state(struct selinux_state *selinux_state); > +#else > +static inline void selinux_ima_measure_state(struct selinux_state *selinux_state) > +{ > +} > +#endif > + > +#endif /* _SELINUX_IMA_H_ */ > diff --git a/security/selinux/include/security.h b/security/selinux/include/security.h > index 3cc8bab31ea8..29cae32d3fc5 100644 > --- a/security/selinux/include/security.h > +++ b/security/selinux/include/security.h > @@ -229,7 +229,8 @@ void selinux_policy_cancel(struct selinux_state *state, > struct selinux_policy *policy); > int security_read_policy(struct selinux_state *state, > void **data, size_t *len); > - > +int security_read_state_kernel(struct selinux_state *state, > + void **data, size_t *len); > int security_policycap_supported(struct selinux_state *state, > unsigned int req_cap); > > diff --git a/security/selinux/ss/services.c b/security/selinux/ss/services.c > index 9704c8a32303..cc8dbc4ed8db 100644 > --- a/security/selinux/ss/services.c > +++ b/security/selinux/ss/services.c > @@ -65,6 +65,7 @@ > #include "ebitmap.h" > #include "audit.h" > #include "policycap_names.h" > +#include "ima.h" > > /* Forward declaration. */ > static int context_struct_to_string(struct policydb *policydb, > @@ -2180,6 +2181,7 @@ static void selinux_notify_policy_change(struct selinux_state *state, > selinux_status_update_policyload(state, seqno); > selinux_netlbl_cache_invalidate(); > selinux_xfrm_notify_policyload(); > + selinux_ima_measure_state(state); > } > > void selinux_policy_commit(struct selinux_state *state, > @@ -3875,8 +3877,33 @@ int security_netlbl_sid_to_secattr(struct selinux_state *state, > } > #endif /* CONFIG_NETLABEL */ > > +/** > + * __security_read_policy - read the policy. > + * @policy: SELinux policy > + * @data: binary policy data > + * @len: length of data in bytes > + * > + */ > +static int __security_read_policy(struct selinux_policy *policy, > + void *data, size_t *len) > +{ > + int rc; > + struct policy_file fp; > + > + fp.data = data; > + fp.len = *len; > + > + rc = policydb_write(&policy->policydb, &fp); > + if (rc) > + return rc; > + > + *len = (unsigned long)fp.data - (unsigned long)data; > + return 0; > +} > + > /** > * security_read_policy - read the policy. > + * @state: selinux_state > * @data: binary policy data > * @len: length of data in bytes > * > @@ -3885,8 +3912,6 @@ int security_read_policy(struct selinux_state *state, > void **data, size_t *len) > { > struct selinux_policy *policy; > - int rc; > - struct policy_file fp; > > policy = rcu_dereference_protected( > state->policy, lockdep_is_held(&state->policy_mutex)); > @@ -3898,14 +3923,35 @@ int security_read_policy(struct selinux_state *state, > if (!*data) > return -ENOMEM; > > - fp.data = *data; > - fp.len = *len; > + return __security_read_policy(policy, *data, len); > +} > > - rc = policydb_write(&policy->policydb, &fp); > - if (rc) > - return rc; > +/** > + * security_read_state_kernel - read the policy. > + * @state: selinux_state > + * @data: binary policy data > + * @len: length of data in bytes > + * > + * Allocates kernel memory for reading SELinux policy. > + * This function is for internal use only and should not > + * be used for returning data to user space. > + * > + * This function must be called with policy_mutex held. > + */ > +int security_read_state_kernel(struct selinux_state *state, > + void **data, size_t *len) > +{ > + struct selinux_policy *policy; > > - *len = (unsigned long)fp.data - (unsigned long)*data; > - return 0; > + policy = rcu_dereference_protected( > + state->policy, lockdep_is_held(&state->policy_mutex)); > + if (!policy) > + return -EINVAL; > + > + *len = policy->policydb.len; > + *data = vmalloc(*len); > + if (!*data) > + return -ENOMEM; > > + return __security_read_policy(policy, *data, len); > } > -- > 2.30.0 >
On 2021-01-14 14:29:09, Paul Moore wrote: > On Thu, Jan 14, 2021 at 2:15 PM Lakshmi Ramasubramanian > <nramas@linux.microsoft.com> wrote: > > > > SELinux stores the active policy in memory, so the changes to this data > > at runtime would have an impact on the security guarantees provided > > by SELinux. Measuring in-memory SELinux policy through IMA subsystem > > provides a secure way for the attestation service to remotely validate > > the policy contents at runtime. > > > > Measure the hash of the loaded policy by calling the IMA hook > > ima_measure_critical_data(). Since the size of the loaded policy > > can be large (several MB), measure the hash of the policy instead of > > the entire policy to avoid bloating the IMA log entry. > > > > To enable SELinux data measurement, the following steps are required: > > > > 1, Add "ima_policy=critical_data" to the kernel command line arguments > > to enable measuring SELinux data at boot time. > > For example, > > BOOT_IMAGE=/boot/vmlinuz-5.10.0-rc1+ root=UUID=fd643309-a5d2-4ed3-b10d-3c579a5fab2f ro nomodeset security=selinux ima_policy=critical_data > > > > 2, Add the following rule to /etc/ima/ima-policy > > measure func=CRITICAL_DATA label=selinux > > > > Sample measurement of the hash of SELinux policy: > > > > To verify the measured data with the current SELinux policy run > > the following commands and verify the output hash values match. > > > > sha256sum /sys/fs/selinux/policy | cut -d' ' -f 1 > > > > grep "selinux-policy-hash" /sys/kernel/security/integrity/ima/ascii_runtime_measurements | tail -1 | cut -d' ' -f 6 > > > > Note that the actual verification of SELinux policy would require loading > > the expected policy into an identical kernel on a pristine/known-safe > > system and run the sha256sum /sys/kernel/selinux/policy there to get > > the expected hash. > > > > Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> > > Suggested-by: Stephen Smalley <stephen.smalley.work@gmail.com> > > Acked-by: Paul Moore <paul@paul-moore.com> > > Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com> > > --- > > Documentation/ABI/testing/ima_policy | 3 +- > > security/selinux/Makefile | 2 + > > security/selinux/ima.c | 44 +++++++++++++++++++ > > security/selinux/include/ima.h | 24 +++++++++++ > > security/selinux/include/security.h | 3 +- > > security/selinux/ss/services.c | 64 ++++++++++++++++++++++++---- > > 6 files changed, 129 insertions(+), 11 deletions(-) > > create mode 100644 security/selinux/ima.c > > create mode 100644 security/selinux/include/ima.h > > I think this has changed enough that keeping the "Acked-by" and > "Reviewed-by" tags is probably not a good choice. I took a quick look > and this still looks okay from a SELinux perspective, I'll leave Mimi > to comment on it from a IMA perspective. > > Unless Tyler has reviewed this version prior to your posting, it might > be a good idea to remove his "Reviewed-by" unless he has a chance to > look this over again before it is merged. Thanks for calling this out. I hadn't reviewed it prior to the posting but I was keeping an eye on the thread. This new revision still looks good to me and I like the idea of controlling re-measurements via policy. So, Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com> Tyler > > > diff --git a/Documentation/ABI/testing/ima_policy b/Documentation/ABI/testing/ima_policy > > index 54fe1c15ed50..8365596cb42b 100644 > > --- a/Documentation/ABI/testing/ima_policy > > +++ b/Documentation/ABI/testing/ima_policy > > @@ -52,8 +52,9 @@ Description: > > template:= name of a defined IMA template type > > (eg, ima-ng). Only valid when action is "measure". > > pcr:= decimal value > > - label:= [data_label] > > + label:= [selinux]|[data_label] > > data_label:= a unique string used for grouping and limiting critical data. > > + For example, "selinux" to measure critical data for SELinux. > > > > default policy: > > # PROC_SUPER_MAGIC > > diff --git a/security/selinux/Makefile b/security/selinux/Makefile > > index 4d8e0e8adf0b..776162444882 100644 > > --- a/security/selinux/Makefile > > +++ b/security/selinux/Makefile > > @@ -16,6 +16,8 @@ selinux-$(CONFIG_NETLABEL) += netlabel.o > > > > selinux-$(CONFIG_SECURITY_INFINIBAND) += ibpkey.o > > > > +selinux-$(CONFIG_IMA) += ima.o > > + > > ccflags-y := -I$(srctree)/security/selinux -I$(srctree)/security/selinux/include > > > > $(addprefix $(obj)/,$(selinux-y)): $(obj)/flask.h > > diff --git a/security/selinux/ima.c b/security/selinux/ima.c > > new file mode 100644 > > index 000000000000..03715893ff97 > > --- /dev/null > > +++ b/security/selinux/ima.c > > @@ -0,0 +1,44 @@ > > +// SPDX-License-Identifier: GPL-2.0+ > > +/* > > + * Copyright (C) 2021 Microsoft Corporation > > + * > > + * Author: Lakshmi Ramasubramanian (nramas@linux.microsoft.com) > > + * > > + * Measure critical data structures maintainted by SELinux > > + * using IMA subsystem. > > + */ > > +#include <linux/vmalloc.h> > > +#include <linux/ima.h> > > +#include "security.h" > > +#include "ima.h" > > + > > +/* > > + * selinux_ima_measure_state - Measure hash of the SELinux policy > > + * > > + * @state: selinux state struct > > + * > > + * NOTE: This function must be called with policy_mutex held. > > + */ > > +void selinux_ima_measure_state(struct selinux_state *state) > > +{ > > + void *policy = NULL; > > + size_t policy_len; > > + int rc = 0; > > + > > + /* > > + * Measure SELinux policy only after initialization is completed. > > + */ > > + if (!selinux_initialized(state)) > > + return; > > + > > + rc = security_read_state_kernel(state, &policy, &policy_len); > > + if (rc) { > > + pr_err("SELinux: %s: failed to read policy %d.\n", __func__, rc); > > + return; > > + } > > + > > + ima_measure_critical_data("selinux", "selinux-policy-hash", > > + policy, policy_len, true); > > + > > + vfree(policy); > > +} > > diff --git a/security/selinux/include/ima.h b/security/selinux/include/ima.h > > new file mode 100644 > > index 000000000000..d69c36611423 > > --- /dev/null > > +++ b/security/selinux/include/ima.h > > @@ -0,0 +1,24 @@ > > +/* SPDX-License-Identifier: GPL-2.0+ */ > > +/* > > + * Copyright (C) 2021 Microsoft Corporation > > + * > > + * Author: Lakshmi Ramasubramanian (nramas@linux.microsoft.com) > > + * > > + * Measure critical data structures maintainted by SELinux > > + * using IMA subsystem. > > + */ > > + > > +#ifndef _SELINUX_IMA_H_ > > +#define _SELINUX_IMA_H_ > > + > > +#include "security.h" > > + > > +#ifdef CONFIG_IMA > > +extern void selinux_ima_measure_state(struct selinux_state *selinux_state); > > +#else > > +static inline void selinux_ima_measure_state(struct selinux_state *selinux_state) > > +{ > > +} > > +#endif > > + > > +#endif /* _SELINUX_IMA_H_ */ > > diff --git a/security/selinux/include/security.h b/security/selinux/include/security.h > > index 3cc8bab31ea8..29cae32d3fc5 100644 > > --- a/security/selinux/include/security.h > > +++ b/security/selinux/include/security.h > > @@ -229,7 +229,8 @@ void selinux_policy_cancel(struct selinux_state *state, > > struct selinux_policy *policy); > > int security_read_policy(struct selinux_state *state, > > void **data, size_t *len); > > - > > +int security_read_state_kernel(struct selinux_state *state, > > + void **data, size_t *len); > > int security_policycap_supported(struct selinux_state *state, > > unsigned int req_cap); > > > > diff --git a/security/selinux/ss/services.c b/security/selinux/ss/services.c > > index 9704c8a32303..cc8dbc4ed8db 100644 > > --- a/security/selinux/ss/services.c > > +++ b/security/selinux/ss/services.c > > @@ -65,6 +65,7 @@ > > #include "ebitmap.h" > > #include "audit.h" > > #include "policycap_names.h" > > +#include "ima.h" > > > > /* Forward declaration. */ > > static int context_struct_to_string(struct policydb *policydb, > > @@ -2180,6 +2181,7 @@ static void selinux_notify_policy_change(struct selinux_state *state, > > selinux_status_update_policyload(state, seqno); > > selinux_netlbl_cache_invalidate(); > > selinux_xfrm_notify_policyload(); > > + selinux_ima_measure_state(state); > > } > > > > void selinux_policy_commit(struct selinux_state *state, > > @@ -3875,8 +3877,33 @@ int security_netlbl_sid_to_secattr(struct selinux_state *state, > > } > > #endif /* CONFIG_NETLABEL */ > > > > +/** > > + * __security_read_policy - read the policy. > > + * @policy: SELinux policy > > + * @data: binary policy data > > + * @len: length of data in bytes > > + * > > + */ > > +static int __security_read_policy(struct selinux_policy *policy, > > + void *data, size_t *len) > > +{ > > + int rc; > > + struct policy_file fp; > > + > > + fp.data = data; > > + fp.len = *len; > > + > > + rc = policydb_write(&policy->policydb, &fp); > > + if (rc) > > + return rc; > > + > > + *len = (unsigned long)fp.data - (unsigned long)data; > > + return 0; > > +} > > + > > /** > > * security_read_policy - read the policy. > > + * @state: selinux_state > > * @data: binary policy data > > * @len: length of data in bytes > > * > > @@ -3885,8 +3912,6 @@ int security_read_policy(struct selinux_state *state, > > void **data, size_t *len) > > { > > struct selinux_policy *policy; > > - int rc; > > - struct policy_file fp; > > > > policy = rcu_dereference_protected( > > state->policy, lockdep_is_held(&state->policy_mutex)); > > @@ -3898,14 +3923,35 @@ int security_read_policy(struct selinux_state *state, > > if (!*data) > > return -ENOMEM; > > > > - fp.data = *data; > > - fp.len = *len; > > + return __security_read_policy(policy, *data, len); > > +} > > > > - rc = policydb_write(&policy->policydb, &fp); > > - if (rc) > > - return rc; > > +/** > > + * security_read_state_kernel - read the policy. > > + * @state: selinux_state > > + * @data: binary policy data > > + * @len: length of data in bytes > > + * > > + * Allocates kernel memory for reading SELinux policy. > > + * This function is for internal use only and should not > > + * be used for returning data to user space. > > + * > > + * This function must be called with policy_mutex held. > > + */ > > +int security_read_state_kernel(struct selinux_state *state, > > + void **data, size_t *len) > > +{ > > + struct selinux_policy *policy; > > > > - *len = (unsigned long)fp.data - (unsigned long)*data; > > - return 0; > > + policy = rcu_dereference_protected( > > + state->policy, lockdep_is_held(&state->policy_mutex)); > > + if (!policy) > > + return -EINVAL; > > + > > + *len = policy->policydb.len; > > + *data = vmalloc(*len); > > + if (!*data) > > + return -ENOMEM; > > > > + return __security_read_policy(policy, *data, len); > > } > > -- > > 2.30.0 > > > > > -- > paul moore > www.paul-moore.com >
On 1/14/21 11:58 AM, Tyler Hicks wrote: > On 2021-01-14 14:29:09, Paul Moore wrote: >> On Thu, Jan 14, 2021 at 2:15 PM Lakshmi Ramasubramanian >> <nramas@linux.microsoft.com> wrote: >>> >>> SELinux stores the active policy in memory, so the changes to this data >>> at runtime would have an impact on the security guarantees provided >>> by SELinux. Measuring in-memory SELinux policy through IMA subsystem >>> provides a secure way for the attestation service to remotely validate >>> the policy contents at runtime. >>> >>> Measure the hash of the loaded policy by calling the IMA hook >>> ima_measure_critical_data(). Since the size of the loaded policy >>> can be large (several MB), measure the hash of the policy instead of >>> the entire policy to avoid bloating the IMA log entry. >>> >>> To enable SELinux data measurement, the following steps are required: >>> >>> 1, Add "ima_policy=critical_data" to the kernel command line arguments >>> to enable measuring SELinux data at boot time. >>> For example, >>> BOOT_IMAGE=/boot/vmlinuz-5.10.0-rc1+ root=UUID=fd643309-a5d2-4ed3-b10d-3c579a5fab2f ro nomodeset security=selinux ima_policy=critical_data >>> >>> 2, Add the following rule to /etc/ima/ima-policy >>> measure func=CRITICAL_DATA label=selinux >>> >>> Sample measurement of the hash of SELinux policy: >>> >>> To verify the measured data with the current SELinux policy run >>> the following commands and verify the output hash values match. >>> >>> sha256sum /sys/fs/selinux/policy | cut -d' ' -f 1 >>> >>> grep "selinux-policy-hash" /sys/kernel/security/integrity/ima/ascii_runtime_measurements | tail -1 | cut -d' ' -f 6 >>> >>> Note that the actual verification of SELinux policy would require loading >>> the expected policy into an identical kernel on a pristine/known-safe >>> system and run the sha256sum /sys/kernel/selinux/policy there to get >>> the expected hash. >>> >>> Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> >>> Suggested-by: Stephen Smalley <stephen.smalley.work@gmail.com> >>> Acked-by: Paul Moore <paul@paul-moore.com> >>> Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com> >>> --- >>> Documentation/ABI/testing/ima_policy | 3 +- >>> security/selinux/Makefile | 2 + >>> security/selinux/ima.c | 44 +++++++++++++++++++ >>> security/selinux/include/ima.h | 24 +++++++++++ >>> security/selinux/include/security.h | 3 +- >>> security/selinux/ss/services.c | 64 ++++++++++++++++++++++++---- >>> 6 files changed, 129 insertions(+), 11 deletions(-) >>> create mode 100644 security/selinux/ima.c >>> create mode 100644 security/selinux/include/ima.h >> >> I think this has changed enough that keeping the "Acked-by" and >> "Reviewed-by" tags is probably not a good choice. I took a quick look >> and this still looks okay from a SELinux perspective, I'll leave Mimi >> to comment on it from a IMA perspective. Thanks for reviewing the change Paul. >> >> Unless Tyler has reviewed this version prior to your posting, it might >> be a good idea to remove his "Reviewed-by" unless he has a chance to >> look this over again before it is merged. > > Thanks for calling this out. I hadn't reviewed it prior to the posting > but I was keeping an eye on the thread. > > This new revision still looks good to me and I like the idea of > controlling re-measurements via policy. So, > > Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com> Thanks for the quick response Tyler. -lakshmi
On Thu, Jan 14, 2021 at 2:15 PM Lakshmi Ramasubramanian <nramas@linux.microsoft.com> wrote: > > SELinux stores the active policy in memory, so the changes to this data > at runtime would have an impact on the security guarantees provided > by SELinux. Measuring in-memory SELinux policy through IMA subsystem > provides a secure way for the attestation service to remotely validate > the policy contents at runtime. > > Measure the hash of the loaded policy by calling the IMA hook > ima_measure_critical_data(). Since the size of the loaded policy > can be large (several MB), measure the hash of the policy instead of > the entire policy to avoid bloating the IMA log entry. > > To enable SELinux data measurement, the following steps are required: > > 1, Add "ima_policy=critical_data" to the kernel command line arguments > to enable measuring SELinux data at boot time. > For example, > BOOT_IMAGE=/boot/vmlinuz-5.10.0-rc1+ root=UUID=fd643309-a5d2-4ed3-b10d-3c579a5fab2f ro nomodeset security=selinux ima_policy=critical_data > > 2, Add the following rule to /etc/ima/ima-policy > measure func=CRITICAL_DATA label=selinux > > Sample measurement of the hash of SELinux policy: > > To verify the measured data with the current SELinux policy run > the following commands and verify the output hash values match. > > sha256sum /sys/fs/selinux/policy | cut -d' ' -f 1 > > grep "selinux-policy-hash" /sys/kernel/security/integrity/ima/ascii_runtime_measurements | tail -1 | cut -d' ' -f 6 > > Note that the actual verification of SELinux policy would require loading > the expected policy into an identical kernel on a pristine/known-safe > system and run the sha256sum /sys/kernel/selinux/policy there to get > the expected hash. > > Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> > Suggested-by: Stephen Smalley <stephen.smalley.work@gmail.com> > Acked-by: Paul Moore <paul@paul-moore.com> > Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com> > --- > Documentation/ABI/testing/ima_policy | 3 +- > security/selinux/Makefile | 2 + > security/selinux/ima.c | 44 +++++++++++++++++++ > security/selinux/include/ima.h | 24 +++++++++++ > security/selinux/include/security.h | 3 +- > security/selinux/ss/services.c | 64 ++++++++++++++++++++++++---- > 6 files changed, 129 insertions(+), 11 deletions(-) > create mode 100644 security/selinux/ima.c > create mode 100644 security/selinux/include/ima.h Hi Mimi, Just checking as I didn't see a reply to this from you in my inbox, you merged this into the IMA linux-next branch, yes? > diff --git a/Documentation/ABI/testing/ima_policy b/Documentation/ABI/testing/ima_policy > index 54fe1c15ed50..8365596cb42b 100644 > --- a/Documentation/ABI/testing/ima_policy > +++ b/Documentation/ABI/testing/ima_policy > @@ -52,8 +52,9 @@ Description: > template:= name of a defined IMA template type > (eg, ima-ng). Only valid when action is "measure". > pcr:= decimal value > - label:= [data_label] > + label:= [selinux]|[data_label] > data_label:= a unique string used for grouping and limiting critical data. > + For example, "selinux" to measure critical data for SELinux. > > default policy: > # PROC_SUPER_MAGIC > diff --git a/security/selinux/Makefile b/security/selinux/Makefile > index 4d8e0e8adf0b..776162444882 100644 > --- a/security/selinux/Makefile > +++ b/security/selinux/Makefile > @@ -16,6 +16,8 @@ selinux-$(CONFIG_NETLABEL) += netlabel.o > > selinux-$(CONFIG_SECURITY_INFINIBAND) += ibpkey.o > > +selinux-$(CONFIG_IMA) += ima.o > + > ccflags-y := -I$(srctree)/security/selinux -I$(srctree)/security/selinux/include > > $(addprefix $(obj)/,$(selinux-y)): $(obj)/flask.h > diff --git a/security/selinux/ima.c b/security/selinux/ima.c > new file mode 100644 > index 000000000000..03715893ff97 > --- /dev/null > +++ b/security/selinux/ima.c > @@ -0,0 +1,44 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * Copyright (C) 2021 Microsoft Corporation > + * > + * Author: Lakshmi Ramasubramanian (nramas@linux.microsoft.com) > + * > + * Measure critical data structures maintainted by SELinux > + * using IMA subsystem. > + */ > +#include <linux/vmalloc.h> > +#include <linux/ima.h> > +#include "security.h" > +#include "ima.h" > + > +/* > + * selinux_ima_measure_state - Measure hash of the SELinux policy > + * > + * @state: selinux state struct > + * > + * NOTE: This function must be called with policy_mutex held. > + */ > +void selinux_ima_measure_state(struct selinux_state *state) > +{ > + void *policy = NULL; > + size_t policy_len; > + int rc = 0; > + > + /* > + * Measure SELinux policy only after initialization is completed. > + */ > + if (!selinux_initialized(state)) > + return; > + > + rc = security_read_state_kernel(state, &policy, &policy_len); > + if (rc) { > + pr_err("SELinux: %s: failed to read policy %d.\n", __func__, rc); > + return; > + } > + > + ima_measure_critical_data("selinux", "selinux-policy-hash", > + policy, policy_len, true); > + > + vfree(policy); > +} > diff --git a/security/selinux/include/ima.h b/security/selinux/include/ima.h > new file mode 100644 > index 000000000000..d69c36611423 > --- /dev/null > +++ b/security/selinux/include/ima.h > @@ -0,0 +1,24 @@ > +/* SPDX-License-Identifier: GPL-2.0+ */ > +/* > + * Copyright (C) 2021 Microsoft Corporation > + * > + * Author: Lakshmi Ramasubramanian (nramas@linux.microsoft.com) > + * > + * Measure critical data structures maintainted by SELinux > + * using IMA subsystem. > + */ > + > +#ifndef _SELINUX_IMA_H_ > +#define _SELINUX_IMA_H_ > + > +#include "security.h" > + > +#ifdef CONFIG_IMA > +extern void selinux_ima_measure_state(struct selinux_state *selinux_state); > +#else > +static inline void selinux_ima_measure_state(struct selinux_state *selinux_state) > +{ > +} > +#endif > + > +#endif /* _SELINUX_IMA_H_ */ > diff --git a/security/selinux/include/security.h b/security/selinux/include/security.h > index 3cc8bab31ea8..29cae32d3fc5 100644 > --- a/security/selinux/include/security.h > +++ b/security/selinux/include/security.h > @@ -229,7 +229,8 @@ void selinux_policy_cancel(struct selinux_state *state, > struct selinux_policy *policy); > int security_read_policy(struct selinux_state *state, > void **data, size_t *len); > - > +int security_read_state_kernel(struct selinux_state *state, > + void **data, size_t *len); > int security_policycap_supported(struct selinux_state *state, > unsigned int req_cap); > > diff --git a/security/selinux/ss/services.c b/security/selinux/ss/services.c > index 9704c8a32303..cc8dbc4ed8db 100644 > --- a/security/selinux/ss/services.c > +++ b/security/selinux/ss/services.c > @@ -65,6 +65,7 @@ > #include "ebitmap.h" > #include "audit.h" > #include "policycap_names.h" > +#include "ima.h" > > /* Forward declaration. */ > static int context_struct_to_string(struct policydb *policydb, > @@ -2180,6 +2181,7 @@ static void selinux_notify_policy_change(struct selinux_state *state, > selinux_status_update_policyload(state, seqno); > selinux_netlbl_cache_invalidate(); > selinux_xfrm_notify_policyload(); > + selinux_ima_measure_state(state); > } > > void selinux_policy_commit(struct selinux_state *state, > @@ -3875,8 +3877,33 @@ int security_netlbl_sid_to_secattr(struct selinux_state *state, > } > #endif /* CONFIG_NETLABEL */ > > +/** > + * __security_read_policy - read the policy. > + * @policy: SELinux policy > + * @data: binary policy data > + * @len: length of data in bytes > + * > + */ > +static int __security_read_policy(struct selinux_policy *policy, > + void *data, size_t *len) > +{ > + int rc; > + struct policy_file fp; > + > + fp.data = data; > + fp.len = *len; > + > + rc = policydb_write(&policy->policydb, &fp); > + if (rc) > + return rc; > + > + *len = (unsigned long)fp.data - (unsigned long)data; > + return 0; > +} > + > /** > * security_read_policy - read the policy. > + * @state: selinux_state > * @data: binary policy data > * @len: length of data in bytes > * > @@ -3885,8 +3912,6 @@ int security_read_policy(struct selinux_state *state, > void **data, size_t *len) > { > struct selinux_policy *policy; > - int rc; > - struct policy_file fp; > > policy = rcu_dereference_protected( > state->policy, lockdep_is_held(&state->policy_mutex)); > @@ -3898,14 +3923,35 @@ int security_read_policy(struct selinux_state *state, > if (!*data) > return -ENOMEM; > > - fp.data = *data; > - fp.len = *len; > + return __security_read_policy(policy, *data, len); > +} > > - rc = policydb_write(&policy->policydb, &fp); > - if (rc) > - return rc; > +/** > + * security_read_state_kernel - read the policy. > + * @state: selinux_state > + * @data: binary policy data > + * @len: length of data in bytes > + * > + * Allocates kernel memory for reading SELinux policy. > + * This function is for internal use only and should not > + * be used for returning data to user space. > + * > + * This function must be called with policy_mutex held. > + */ > +int security_read_state_kernel(struct selinux_state *state, > + void **data, size_t *len) > +{ > + struct selinux_policy *policy; > > - *len = (unsigned long)fp.data - (unsigned long)*data; > - return 0; > + policy = rcu_dereference_protected( > + state->policy, lockdep_is_held(&state->policy_mutex)); > + if (!policy) > + return -EINVAL; > + > + *len = policy->policydb.len; > + *data = vmalloc(*len); > + if (!*data) > + return -ENOMEM; > > + return __security_read_policy(policy, *data, len); > } > -- > 2.30.0
On Fri, 2021-01-22 at 15:24 -0500, Paul Moore wrote: > On Thu, Jan 14, 2021 at 2:15 PM Lakshmi Ramasubramanian > <nramas@linux.microsoft.com> wrote: > > > > SELinux stores the active policy in memory, so the changes to this data > > at runtime would have an impact on the security guarantees provided > > by SELinux. Measuring in-memory SELinux policy through IMA subsystem > > provides a secure way for the attestation service to remotely validate > > the policy contents at runtime. > > > > Measure the hash of the loaded policy by calling the IMA hook > > ima_measure_critical_data(). Since the size of the loaded policy > > can be large (several MB), measure the hash of the policy instead of > > the entire policy to avoid bloating the IMA log entry. > > > > To enable SELinux data measurement, the following steps are required: > > > > 1, Add "ima_policy=critical_data" to the kernel command line arguments > > to enable measuring SELinux data at boot time. > > For example, > > BOOT_IMAGE=/boot/vmlinuz-5.10.0-rc1+ root=UUID=fd643309-a5d2-4ed3-b10d-3c579a5fab2f ro nomodeset security=selinux ima_policy=critical_data > > > > 2, Add the following rule to /etc/ima/ima-policy > > measure func=CRITICAL_DATA label=selinux > > > > Sample measurement of the hash of SELinux policy: > > > > To verify the measured data with the current SELinux policy run > > the following commands and verify the output hash values match. > > > > sha256sum /sys/fs/selinux/policy | cut -d' ' -f 1 > > > > grep "selinux-policy-hash" /sys/kernel/security/integrity/ima/ascii_runtime_measurements | tail -1 | cut -d' ' -f 6 > > > > Note that the actual verification of SELinux policy would require loading > > the expected policy into an identical kernel on a pristine/known-safe > > system and run the sha256sum /sys/kernel/selinux/policy there to get > > the expected hash. > > > > Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> > > Suggested-by: Stephen Smalley <stephen.smalley.work@gmail.com> > > Acked-by: Paul Moore <paul@paul-moore.com> > > Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com> > > --- > > Documentation/ABI/testing/ima_policy | 3 +- > > security/selinux/Makefile | 2 + > > security/selinux/ima.c | 44 +++++++++++++++++++ > > security/selinux/include/ima.h | 24 +++++++++++ > > security/selinux/include/security.h | 3 +- > > security/selinux/ss/services.c | 64 ++++++++++++++++++++++++---- > > 6 files changed, 129 insertions(+), 11 deletions(-) > > create mode 100644 security/selinux/ima.c > > create mode 100644 security/selinux/include/ima.h > > Hi Mimi, > > Just checking as I didn't see a reply to this from you in my inbox, > you merged this into the IMA linux-next branch, yes? The patches are first staged in the linux-integrity #next-integrity- testing branch, before being staged in the #next-integrity branch, which is picked up by linux-next. Sorry, they've been staged in the next-integrity-testing branch, but are now next-integrity. Mim
diff --git a/Documentation/ABI/testing/ima_policy b/Documentation/ABI/testing/ima_policy index 54fe1c15ed50..8365596cb42b 100644 --- a/Documentation/ABI/testing/ima_policy +++ b/Documentation/ABI/testing/ima_policy @@ -52,8 +52,9 @@ Description: template:= name of a defined IMA template type (eg, ima-ng). Only valid when action is "measure". pcr:= decimal value - label:= [data_label] + label:= [selinux]|[data_label] data_label:= a unique string used for grouping and limiting critical data. + For example, "selinux" to measure critical data for SELinux. default policy: # PROC_SUPER_MAGIC diff --git a/security/selinux/Makefile b/security/selinux/Makefile index 4d8e0e8adf0b..776162444882 100644 --- a/security/selinux/Makefile +++ b/security/selinux/Makefile @@ -16,6 +16,8 @@ selinux-$(CONFIG_NETLABEL) += netlabel.o selinux-$(CONFIG_SECURITY_INFINIBAND) += ibpkey.o +selinux-$(CONFIG_IMA) += ima.o + ccflags-y := -I$(srctree)/security/selinux -I$(srctree)/security/selinux/include $(addprefix $(obj)/,$(selinux-y)): $(obj)/flask.h diff --git a/security/selinux/ima.c b/security/selinux/ima.c new file mode 100644 index 000000000000..03715893ff97 --- /dev/null +++ b/security/selinux/ima.c @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2021 Microsoft Corporation + * + * Author: Lakshmi Ramasubramanian (nramas@linux.microsoft.com) + * + * Measure critical data structures maintainted by SELinux + * using IMA subsystem. + */ +#include <linux/vmalloc.h> +#include <linux/ima.h> +#include "security.h" +#include "ima.h" + +/* + * selinux_ima_measure_state - Measure hash of the SELinux policy + * + * @state: selinux state struct + * + * NOTE: This function must be called with policy_mutex held. + */ +void selinux_ima_measure_state(struct selinux_state *state) +{ + void *policy = NULL; + size_t policy_len; + int rc = 0; + + /* + * Measure SELinux policy only after initialization is completed. + */ + if (!selinux_initialized(state)) + return; + + rc = security_read_state_kernel(state, &policy, &policy_len); + if (rc) { + pr_err("SELinux: %s: failed to read policy %d.\n", __func__, rc); + return; + } + + ima_measure_critical_data("selinux", "selinux-policy-hash", + policy, policy_len, true); + + vfree(policy); +} diff --git a/security/selinux/include/ima.h b/security/selinux/include/ima.h new file mode 100644 index 000000000000..d69c36611423 --- /dev/null +++ b/security/selinux/include/ima.h @@ -0,0 +1,24 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2021 Microsoft Corporation + * + * Author: Lakshmi Ramasubramanian (nramas@linux.microsoft.com) + * + * Measure critical data structures maintainted by SELinux + * using IMA subsystem. + */ + +#ifndef _SELINUX_IMA_H_ +#define _SELINUX_IMA_H_ + +#include "security.h" + +#ifdef CONFIG_IMA +extern void selinux_ima_measure_state(struct selinux_state *selinux_state); +#else +static inline void selinux_ima_measure_state(struct selinux_state *selinux_state) +{ +} +#endif + +#endif /* _SELINUX_IMA_H_ */ diff --git a/security/selinux/include/security.h b/security/selinux/include/security.h index 3cc8bab31ea8..29cae32d3fc5 100644 --- a/security/selinux/include/security.h +++ b/security/selinux/include/security.h @@ -229,7 +229,8 @@ void selinux_policy_cancel(struct selinux_state *state, struct selinux_policy *policy); int security_read_policy(struct selinux_state *state, void **data, size_t *len); - +int security_read_state_kernel(struct selinux_state *state, + void **data, size_t *len); int security_policycap_supported(struct selinux_state *state, unsigned int req_cap); diff --git a/security/selinux/ss/services.c b/security/selinux/ss/services.c index 9704c8a32303..cc8dbc4ed8db 100644 --- a/security/selinux/ss/services.c +++ b/security/selinux/ss/services.c @@ -65,6 +65,7 @@ #include "ebitmap.h" #include "audit.h" #include "policycap_names.h" +#include "ima.h" /* Forward declaration. */ static int context_struct_to_string(struct policydb *policydb, @@ -2180,6 +2181,7 @@ static void selinux_notify_policy_change(struct selinux_state *state, selinux_status_update_policyload(state, seqno); selinux_netlbl_cache_invalidate(); selinux_xfrm_notify_policyload(); + selinux_ima_measure_state(state); } void selinux_policy_commit(struct selinux_state *state, @@ -3875,8 +3877,33 @@ int security_netlbl_sid_to_secattr(struct selinux_state *state, } #endif /* CONFIG_NETLABEL */ +/** + * __security_read_policy - read the policy. + * @policy: SELinux policy + * @data: binary policy data + * @len: length of data in bytes + * + */ +static int __security_read_policy(struct selinux_policy *policy, + void *data, size_t *len) +{ + int rc; + struct policy_file fp; + + fp.data = data; + fp.len = *len; + + rc = policydb_write(&policy->policydb, &fp); + if (rc) + return rc; + + *len = (unsigned long)fp.data - (unsigned long)data; + return 0; +} + /** * security_read_policy - read the policy. + * @state: selinux_state * @data: binary policy data * @len: length of data in bytes * @@ -3885,8 +3912,6 @@ int security_read_policy(struct selinux_state *state, void **data, size_t *len) { struct selinux_policy *policy; - int rc; - struct policy_file fp; policy = rcu_dereference_protected( state->policy, lockdep_is_held(&state->policy_mutex)); @@ -3898,14 +3923,35 @@ int security_read_policy(struct selinux_state *state, if (!*data) return -ENOMEM; - fp.data = *data; - fp.len = *len; + return __security_read_policy(policy, *data, len); +} - rc = policydb_write(&policy->policydb, &fp); - if (rc) - return rc; +/** + * security_read_state_kernel - read the policy. + * @state: selinux_state + * @data: binary policy data + * @len: length of data in bytes + * + * Allocates kernel memory for reading SELinux policy. + * This function is for internal use only and should not + * be used for returning data to user space. + * + * This function must be called with policy_mutex held. + */ +int security_read_state_kernel(struct selinux_state *state, + void **data, size_t *len) +{ + struct selinux_policy *policy; - *len = (unsigned long)fp.data - (unsigned long)*data; - return 0; + policy = rcu_dereference_protected( + state->policy, lockdep_is_held(&state->policy_mutex)); + if (!policy) + return -EINVAL; + + *len = policy->policydb.len; + *data = vmalloc(*len); + if (!*data) + return -ENOMEM; + return __security_read_policy(policy, *data, len); }