diff mbox series

[v9,2/9] x509: Detect sm2 keys by their parameters OID

Message ID 20210225160802.2478700-3-stefanb@linux.vnet.ibm.com (mailing list archive)
State New, archived
Headers show
Series Add support for x509 certs with NIST P384/256/192 keys | expand

Commit Message

Stefan Berger Feb. 25, 2021, 4:07 p.m. UTC
From: Stefan Berger <stefanb@linux.ibm.com>

Detect whether a key is an sm2 type of key by its OID in the parameters
array rather than assuming that everything under OID_id_ecPublicKey
is sm2, which is not the case.

Cc: David Howells <dhowells@redhat.com>
Cc: keyrings@vger.kernel.org
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
---
 crypto/asymmetric_keys/x509_cert_parser.c | 12 +++++++++++-
 include/linux/oid_registry.h              |  1 +
 lib/oid_registry.c                        | 13 +++++++++++++
 3 files changed, 25 insertions(+), 1 deletion(-)

Comments

Stefan Berger March 3, 2021, 11:46 p.m. UTC | #1
Tianjia,

    can you say whether SM2 support works for you before and after 
applying this patch? I cannot verify it with an sm2 key I have created 
using a sequence of commands like this:

 > modprobe sm2_generic
 > id=$(keyctl newring test @u)
 > keyctl padd asymmetric "" $id < sm2.der
add_key: Key was rejected by service
 > keyctl padd asymmetric "" $id < eckeys/cert-prime192v1-0.der
88506426

The sm2 key is reject but the pime192v1 key works just fine. SM2 support 
neither worked for me before nor after this patch here. The difference 
is that before it returned 'add_key: Package not installed'.

This is my sm2 cert:

 > base64 < sm2.der
MIIBbzCCARWgAwIBAgIUfqwndeAy7reymWLwvCHOgYPU2YUwCgYIKoZIzj0EAwIwDTELMAkGA1UE
AwwCbWUwHhcNMjEwMTI0MTgwNjQ3WhcNMjIwMTI0MTgwNjQ3WjANMQswCQYDVQQDDAJtZTBZMBMG
ByqGSM49AgEGCCqBHM9VAYItA0IABEtiMaczdk46MEugmOsY/u+puf5qoi7JdLd/w3VpdixvDd26
vrxLKL7lCTVn5w3a07G7QB1dgdMDpzIRgWrVXC6jUzBRMB0GA1UdDgQWBBSxOVnE7ihvTb6Nczb4
/mow+HIc9TAfBgNVHSMEGDAWgBSxOVnE7ihvTb6Nczb4/mow+HIc9TAPBgNVHRMBAf8EBTADAQH/
MAoGCCqGSM49BAMCA0gAMEUCIE1kiji2ABUy663NANe0iCPjCeeqg02Yk4b3K+Ci/Qh4AiEA/cFB
eJEVklyveRMvuTP7BN7FG4U8iRdtedjiX+YrNio=

Regards,
    Stefan



On 2/25/21 11:07 AM, Stefan Berger wrote:
> From: Stefan Berger <stefanb@linux.ibm.com>
>
> Detect whether a key is an sm2 type of key by its OID in the parameters
> array rather than assuming that everything under OID_id_ecPublicKey
> is sm2, which is not the case.
>
> Cc: David Howells <dhowells@redhat.com>
> Cc: keyrings@vger.kernel.org
> Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
> Reviewed-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
> ---
>   crypto/asymmetric_keys/x509_cert_parser.c | 12 +++++++++++-
>   include/linux/oid_registry.h              |  1 +
>   lib/oid_registry.c                        | 13 +++++++++++++
>   3 files changed, 25 insertions(+), 1 deletion(-)
>
> diff --git a/crypto/asymmetric_keys/x509_cert_parser.c b/crypto/asymmetric_keys/x509_cert_parser.c
> index 52c9b455fc7d..1621ceaf5c95 100644
> --- a/crypto/asymmetric_keys/x509_cert_parser.c
> +++ b/crypto/asymmetric_keys/x509_cert_parser.c
> @@ -459,6 +459,7 @@ int x509_extract_key_data(void *context, size_t hdrlen,
>   			  const void *value, size_t vlen)
>   {
>   	struct x509_parse_context *ctx = context;
> +	enum OID oid;
>   
>   	ctx->key_algo = ctx->last_oid;
>   	switch (ctx->last_oid) {
> @@ -470,7 +471,16 @@ int x509_extract_key_data(void *context, size_t hdrlen,
>   		ctx->cert->pub->pkey_algo = "ecrdsa";
>   		break;
>   	case OID_id_ecPublicKey:
> -		ctx->cert->pub->pkey_algo = "sm2";
> +		if (parse_OID(ctx->params, ctx->params_size, &oid) != 0)
> +			return -EBADMSG;
> +
> +		switch (oid) {
> +		case OID_sm2:
> +			ctx->cert->pub->pkey_algo = "sm2";
> +			break;
> +		default:
> +			return -ENOPKG;
> +		}
>   		break;
>   	default:
>   		return -ENOPKG;
> diff --git a/include/linux/oid_registry.h b/include/linux/oid_registry.h
> index b504e2f36b25..f32d91895e4d 100644
> --- a/include/linux/oid_registry.h
> +++ b/include/linux/oid_registry.h
> @@ -121,6 +121,7 @@ enum OID {
>   };
>   
>   extern enum OID look_up_OID(const void *data, size_t datasize);
> +extern int parse_OID(const void *data, size_t datasize, enum OID *oid);
>   extern int sprint_oid(const void *, size_t, char *, size_t);
>   extern int sprint_OID(enum OID, char *, size_t);
>   
> diff --git a/lib/oid_registry.c b/lib/oid_registry.c
> index f7ad43f28579..508e0b34b5f0 100644
> --- a/lib/oid_registry.c
> +++ b/lib/oid_registry.c
> @@ -11,6 +11,7 @@
>   #include <linux/kernel.h>
>   #include <linux/errno.h>
>   #include <linux/bug.h>
> +#include <linux/asn1.h>
>   #include "oid_registry_data.c"
>   
>   MODULE_DESCRIPTION("OID Registry");
> @@ -92,6 +93,18 @@ enum OID look_up_OID(const void *data, size_t datasize)
>   }
>   EXPORT_SYMBOL_GPL(look_up_OID);
>   
> +int parse_OID(const void *data, size_t datasize, enum OID *oid)
> +{
> +	const unsigned char *v = data;
> +
> +	if (datasize < 2 || v[0] != ASN1_OID || v[1] != datasize - 2)
> +		return -EBADMSG;
> +
> +	*oid = look_up_OID(data + 2, datasize - 2);
> +	return 0;
> +}
> +EXPORT_SYMBOL_GPL(parse_OID);
> +
>   /*
>    * sprint_OID - Print an Object Identifier into a buffer
>    * @data: The encoded OID to print
tianjia.zhang March 5, 2021, 7:37 a.m. UTC | #2
Hi,

On 3/4/21 7:46 AM, Stefan Berger wrote:
> Tianjia,
> 
>     can you say whether SM2 support works for you before and after 
> applying this patch? I cannot verify it with an sm2 key I have created 
> using a sequence of commands like this:
> 
>  > modprobe sm2_generic
>  > id=$(keyctl newring test @u)
>  > keyctl padd asymmetric "" $id < sm2.der
> add_key: Key was rejected by service
>  > keyctl padd asymmetric "" $id < eckeys/cert-prime192v1-0.der
> 88506426
> 
> The sm2 key is reject but the pime192v1 key works just fine. SM2 support 
> neither worked for me before nor after this patch here. The difference 
> is that before it returned 'add_key: Package not installed'.
> 
> This is my sm2 cert:
> 
>  > base64 < sm2.der
> MIIBbzCCARWgAwIBAgIUfqwndeAy7reymWLwvCHOgYPU2YUwCgYIKoZIzj0EAwIwDTELMAkGA1UE 
> 
> AwwCbWUwHhcNMjEwMTI0MTgwNjQ3WhcNMjIwMTI0MTgwNjQ3WjANMQswCQYDVQQDDAJtZTBZMBMG 
> 
> ByqGSM49AgEGCCqBHM9VAYItA0IABEtiMaczdk46MEugmOsY/u+puf5qoi7JdLd/w3VpdixvDd26 
> 
> vrxLKL7lCTVn5w3a07G7QB1dgdMDpzIRgWrVXC6jUzBRMB0GA1UdDgQWBBSxOVnE7ihvTb6Nczb4 
> 
> /mow+HIc9TAfBgNVHSMEGDAWgBSxOVnE7ihvTb6Nczb4/mow+HIc9TAPBgNVHRMBAf8EBTADAQH/ 
> 
> MAoGCCqGSM49BAMCA0gAMEUCIE1kiji2ABUy663NANe0iCPjCeeqg02Yk4b3K+Ci/Qh4AiEA/cFB 
> 
> eJEVklyveRMvuTP7BN7FG4U8iRdtedjiX+YrNio=
> 
> Regards,
>     Stefan
> 

Yes, it works fine here. Your test method may be wrong. First of all, 
the certificate looks wrong, I don’t know if it is not sent completely. 
Secondly, the SM2 algorithm must be compiled with builtin. There will be 
a problem when it is compiled into a module. This is a restriction for 
SM2 signature with Za. you may refer to this discussion:

https://lkml.org/lkml/2021/1/12/1736

In addition, give you a self-signed root certificate for my test:

-----BEGIN CERTIFICATE-----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-----END CERTIFICATE-----

If you can, please add:

Tested-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>

good luck!

Tianjia
Stefan Berger March 5, 2021, 3:04 p.m. UTC | #3
On 3/5/21 2:37 AM, Tianjia Zhang wrote:
> Hi,
>
> On 3/4/21 7:46 AM, Stefan Berger wrote:
>> Tianjia,
>>
>>     can you say whether SM2 support works for you before and after 
>> applying this patch? I cannot verify it with an sm2 key I have 
>> created using a sequence of commands like this:
>>
>>  > modprobe sm2_generic
>>  > id=$(keyctl newring test @u)
>>  > keyctl padd asymmetric "" $id < sm2.der
>> add_key: Key was rejected by service
>>  > keyctl padd asymmetric "" $id < eckeys/cert-prime192v1-0.der
>> 88506426
>>
>> The sm2 key is reject but the pime192v1 key works just fine. SM2 
>> support neither worked for me before nor after this patch here. The 
>> difference is that before it returned 'add_key: Package not installed'.
>>
>> This is my sm2 cert:
>>
>>  > base64 < sm2.der
>> MIIBbzCCARWgAwIBAgIUfqwndeAy7reymWLwvCHOgYPU2YUwCgYIKoZIzj0EAwIwDTELMAkGA1UE 
>>
>> AwwCbWUwHhcNMjEwMTI0MTgwNjQ3WhcNMjIwMTI0MTgwNjQ3WjANMQswCQYDVQQDDAJtZTBZMBMG 
>>
>> ByqGSM49AgEGCCqBHM9VAYItA0IABEtiMaczdk46MEugmOsY/u+puf5qoi7JdLd/w3VpdixvDd26 
>>
>> vrxLKL7lCTVn5w3a07G7QB1dgdMDpzIRgWrVXC6jUzBRMB0GA1UdDgQWBBSxOVnE7ihvTb6Nczb4 
>>
>> /mow+HIc9TAfBgNVHSMEGDAWgBSxOVnE7ihvTb6Nczb4/mow+HIc9TAPBgNVHRMBAf8EBTADAQH/ 
>>
>> MAoGCCqGSM49BAMCA0gAMEUCIE1kiji2ABUy663NANe0iCPjCeeqg02Yk4b3K+Ci/Qh4AiEA/cFB 
>>
>> eJEVklyveRMvuTP7BN7FG4U8iRdtedjiX+YrNio=
>>
>> Regards,
>>     Stefan
>>
>
> Yes, it works fine here. Your test method may be wrong. First of all, 
> the certificate looks wrong, I don’t know if it is not sent 
> completely. Secondly, the SM2 algorithm must be compiled with builtin. 
> There will be a problem when it is compiled into a module. This is a 
> restriction for SM2 signature with Za. you may refer to this discussion:
>
> https://lkml.org/lkml/2021/1/12/1736
>
> In addition, give you a self-signed root certificate for my test:
>
> -----BEGIN CERTIFICATE-----
> MIICLjCCAdWgAwIBAgIUEoozP6LzMYWh4gCpcWlzsUyfgsIwCgYIKoEcz1UBg3Uw
> bTELMAkGA1UEBhMCQ04xCzAJBgNVBAgMAkdTMQswCQYDVQQHDAJHdDENMAsGA1UE
> CgwEYmFiYTELMAkGA1UECwwCT1MxCzAJBgNVBAMMAmNhMRswGQYJKoZIhvcNAQkB
> FgxjYUB3b3JsZC5jb20wHhcNMjAwNDE1MTE1NDA3WhcNMzAwNDEzMTE1NDA3WjBt
> MQswCQYDVQQGEwJDTjELMAkGA1UECAwCR1MxCzAJBgNVBAcMAkd0MQ0wCwYDVQQK
> DARiYWJhMQswCQYDVQQLDAJPUzELMAkGA1UEAwwCY2ExGzAZBgkqhkiG9w0BCQEW
> DGNhQHdvcmxkLmNvbTBZMBMGByqGSM49AgEGCCqBHM9VAYItA0IABMTGRiHezKm5
> MiKHlyfa5Bv5jLxge/WRRG0nLNsZx1yf0XQTQBR/tFFjPGePEr7+Fa1CPgYpXExx
> i44coYMmQT6jUzBRMB0GA1UdDgQWBBSjd9GWIe98Ll9J0dquxgCktp9DrTAfBgNV
> HSMEGDAWgBSjd9GWIe98Ll9J0dquxgCktp9DrTAPBgNVHRMBAf8EBTADAQH/MAoG
> CCqBHM9VAYN1A0cAMEQCIAvLWIfGFq85u/vVMLc5H1D/DnrNS0VhSkQA4daRO4tc
> AiABbeWENcQZDZLWTuqG9P2KDPOoNqV/QV/+0XjMAVblhg==
> -----END CERTIFICATE-----
>
> If you can, please add:
>
> Tested-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
>
> good luck!


It works with your certificate! When I create the sm2 with OpenSSL on 
Ubuntu, which seems to have sm2 support, or so one may think, I get this 
type of signature:


I cannot create it with sm3, if that's how this is supposed to be signed:

 > # openssl req -x509 -sm3 -newkey ec -pkeyopt ec_paramgen_curve:sm2 
-keyout sm2key.pem -days 365 -subj '/CN=test' -nodes -outform der -out 
sm2.der
parameter error "ec_paramgen_curve:sm2"
140735899258064:error:100AE081:elliptic curve 
routines:EC_GROUP_new_by_curve_name:unknown group:crypto/ec/ec_curve.c:418:
140735899258064:error:100C508D:elliptic curve 
routines:pkey_ec_ctrl:invalid curve:crypto/ec/ec_pmeth.c:231:


Using sha256 instead, which is the mistake:

 > openssl req -x509 -sha256 -newkey ec -pkeyopt ec_paramgen_curve:sm2 
-keyout sm2key.pem -days 365 -subj '/CN=test' -nodes -outform der -out 
sm2-2nd.der

 > openssl x509 -inform der -in sm2-2nd.der -noout -text

[...]

     Signature Algorithm: ecdsa-with-SHA256
          30:45:02:20:05:72:15:b0:e8:f5:5a:27:d2:fb:f9:de:de:35:
          05:b2:76:8a:6f:84:c1:54:db:c2:38:8c:d2:64:8b:67:23:01:
          02:21:00:97:77:9e:42:fa:41:3d:d4:81:5e:5b:ad:9e:56:ad:
          46:fc:5e:94:92:a6:07:2d:af:62:d2:2d:39:7b:71:f1:4a


Yours has this type of signature:

     Signature Algorithm: 1.2.156.10197.1.501
          30:44:02:20:0b:cb:58:87:c6:16:af:39:bb:fb:d5:30:b7:39:
          1f:50:ff:0e:7a:cd:4b:45:61:4a:44:00:e1:d6:91:3b:8b:5c:
          02:20:01:6d:e5:84:35:c4:19:0d:92:d6:4e:ea:86:f4:fd:8a:
          0c:f3:a8:36:a5:7f:41:5f:fe:d1:78:cc:01:56:e5:86

Thanks anyway!


    Stefan
tianjia.zhang March 8, 2021, 6:58 a.m. UTC | #4
Hi,

On 3/5/21 11:04 PM, Stefan Berger wrote:
> On 3/5/21 2:37 AM, Tianjia Zhang wrote:
>> Hi,
>>
>> On 3/4/21 7:46 AM, Stefan Berger wrote:
>>> Tianjia,
>>>
>>>     can you say whether SM2 support works for you before and after 
>>> applying this patch? I cannot verify it with an sm2 key I have 
>>> created using a sequence of commands like this:
>>>
>>>  > modprobe sm2_generic
>>>  > id=$(keyctl newring test @u)
>>>  > keyctl padd asymmetric "" $id < sm2.der
>>> add_key: Key was rejected by service
>>>  > keyctl padd asymmetric "" $id < eckeys/cert-prime192v1-0.der
>>> 88506426
>>>
>>> The sm2 key is reject but the pime192v1 key works just fine. SM2 
>>> support neither worked for me before nor after this patch here. The 
>>> difference is that before it returned 'add_key: Package not installed'.
>>>
>>> This is my sm2 cert:
>>>
>>>  > base64 < sm2.der
>>> MIIBbzCCARWgAwIBAgIUfqwndeAy7reymWLwvCHOgYPU2YUwCgYIKoZIzj0EAwIwDTELMAkGA1UE 
>>>
>>> AwwCbWUwHhcNMjEwMTI0MTgwNjQ3WhcNMjIwMTI0MTgwNjQ3WjANMQswCQYDVQQDDAJtZTBZMBMG 
>>>
>>> ByqGSM49AgEGCCqBHM9VAYItA0IABEtiMaczdk46MEugmOsY/u+puf5qoi7JdLd/w3VpdixvDd26 
>>>
>>> vrxLKL7lCTVn5w3a07G7QB1dgdMDpzIRgWrVXC6jUzBRMB0GA1UdDgQWBBSxOVnE7ihvTb6Nczb4 
>>>
>>> /mow+HIc9TAfBgNVHSMEGDAWgBSxOVnE7ihvTb6Nczb4/mow+HIc9TAPBgNVHRMBAf8EBTADAQH/ 
>>>
>>> MAoGCCqGSM49BAMCA0gAMEUCIE1kiji2ABUy663NANe0iCPjCeeqg02Yk4b3K+Ci/Qh4AiEA/cFB 
>>>
>>> eJEVklyveRMvuTP7BN7FG4U8iRdtedjiX+YrNio=
>>>
>>> Regards,
>>>     Stefan
>>>
>>
>> Yes, it works fine here. Your test method may be wrong. First of all, 
>> the certificate looks wrong, I don’t know if it is not sent 
>> completely. Secondly, the SM2 algorithm must be compiled with builtin. 
>> There will be a problem when it is compiled into a module. This is a 
>> restriction for SM2 signature with Za. you may refer to this discussion:
>>
>> https://lkml.org/lkml/2021/1/12/1736
>>
>> In addition, give you a self-signed root certificate for my test:
>>
>> -----BEGIN CERTIFICATE-----
>> MIICLjCCAdWgAwIBAgIUEoozP6LzMYWh4gCpcWlzsUyfgsIwCgYIKoEcz1UBg3Uw
>> bTELMAkGA1UEBhMCQ04xCzAJBgNVBAgMAkdTMQswCQYDVQQHDAJHdDENMAsGA1UE
>> CgwEYmFiYTELMAkGA1UECwwCT1MxCzAJBgNVBAMMAmNhMRswGQYJKoZIhvcNAQkB
>> FgxjYUB3b3JsZC5jb20wHhcNMjAwNDE1MTE1NDA3WhcNMzAwNDEzMTE1NDA3WjBt
>> MQswCQYDVQQGEwJDTjELMAkGA1UECAwCR1MxCzAJBgNVBAcMAkd0MQ0wCwYDVQQK
>> DARiYWJhMQswCQYDVQQLDAJPUzELMAkGA1UEAwwCY2ExGzAZBgkqhkiG9w0BCQEW
>> DGNhQHdvcmxkLmNvbTBZMBMGByqGSM49AgEGCCqBHM9VAYItA0IABMTGRiHezKm5
>> MiKHlyfa5Bv5jLxge/WRRG0nLNsZx1yf0XQTQBR/tFFjPGePEr7+Fa1CPgYpXExx
>> i44coYMmQT6jUzBRMB0GA1UdDgQWBBSjd9GWIe98Ll9J0dquxgCktp9DrTAfBgNV
>> HSMEGDAWgBSjd9GWIe98Ll9J0dquxgCktp9DrTAPBgNVHRMBAf8EBTADAQH/MAoG
>> CCqBHM9VAYN1A0cAMEQCIAvLWIfGFq85u/vVMLc5H1D/DnrNS0VhSkQA4daRO4tc
>> AiABbeWENcQZDZLWTuqG9P2KDPOoNqV/QV/+0XjMAVblhg==
>> -----END CERTIFICATE-----
>>
>> If you can, please add:
>>
>> Tested-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
>>
>> good luck!
> 
> 
> It works with your certificate! When I create the sm2 with OpenSSL on 
> Ubuntu, which seems to have sm2 support, or so one may think, I get this 
> type of signature:
> 
> 
> I cannot create it with sm3, if that's how this is supposed to be signed:
> 
>  > # openssl req -x509 -sm3 -newkey ec -pkeyopt ec_paramgen_curve:sm2 
> -keyout sm2key.pem -days 365 -subj '/CN=test' -nodes -outform der -out 
> sm2.der
> parameter error "ec_paramgen_curve:sm2"
> 140735899258064:error:100AE081:elliptic curve 
> routines:EC_GROUP_new_by_curve_name:unknown group:crypto/ec/ec_curve.c:418:
> 140735899258064:error:100C508D:elliptic curve 
> routines:pkey_ec_ctrl:invalid curve:crypto/ec/ec_pmeth.c:231:
> 
> 
> Using sha256 instead, which is the mistake:
> 
>  > openssl req -x509 -sha256 -newkey ec -pkeyopt ec_paramgen_curve:sm2 
> -keyout sm2key.pem -days 365 -subj '/CN=test' -nodes -outform der -out 
> sm2-2nd.der
> 
>  > openssl x509 -inform der -in sm2-2nd.der -noout -text
> 
> [...]
> 
>      Signature Algorithm: ecdsa-with-SHA256
>           30:45:02:20:05:72:15:b0:e8:f5:5a:27:d2:fb:f9:de:de:35:
>           05:b2:76:8a:6f:84:c1:54:db:c2:38:8c:d2:64:8b:67:23:01:
>           02:21:00:97:77:9e:42:fa:41:3d:d4:81:5e:5b:ad:9e:56:ad:
>           46:fc:5e:94:92:a6:07:2d:af:62:d2:2d:39:7b:71:f1:4a
> 
> 
> Yours has this type of signature:
> 
>      Signature Algorithm: 1.2.156.10197.1.501
>           30:44:02:20:0b:cb:58:87:c6:16:af:39:bb:fb:d5:30:b7:39:
>           1f:50:ff:0e:7a:cd:4b:45:61:4a:44:00:e1:d6:91:3b:8b:5c:
>           02:20:01:6d:e5:84:35:c4:19:0d:92:d6:4e:ea:86:f4:fd:8a:
>           0c:f3:a8:36:a5:7f:41:5f:fe:d1:78:cc:01:56:e5:86
> 
> Thanks anyway!
> 
> 
>     Stefan
> 

I guess it may be that your openssl version is too low. At present, only 
openssl 3.0.0 (still in the alpha stage and not yet officially released) 
can support the certificate of the SM2-with-SM3 algorithm combination.

This is the command I used in openssl-3.0.0-alpha6:

openssl ecparam -genkey -name SM2 -text -out ca.key
openssl req -new \
     -x509 -days 3650 \
     -sm3 -sigopt "distid:1234567812345678" \
     -key ca.key \
     -out ca.crt \
     -subj "/C=CN/ST=GS/L=Gt/O=baba/OU=OS/CN=ca/emailAddress=ca@world.com"
diff mbox series

Patch

diff --git a/crypto/asymmetric_keys/x509_cert_parser.c b/crypto/asymmetric_keys/x509_cert_parser.c
index 52c9b455fc7d..1621ceaf5c95 100644
--- a/crypto/asymmetric_keys/x509_cert_parser.c
+++ b/crypto/asymmetric_keys/x509_cert_parser.c
@@ -459,6 +459,7 @@  int x509_extract_key_data(void *context, size_t hdrlen,
 			  const void *value, size_t vlen)
 {
 	struct x509_parse_context *ctx = context;
+	enum OID oid;
 
 	ctx->key_algo = ctx->last_oid;
 	switch (ctx->last_oid) {
@@ -470,7 +471,16 @@  int x509_extract_key_data(void *context, size_t hdrlen,
 		ctx->cert->pub->pkey_algo = "ecrdsa";
 		break;
 	case OID_id_ecPublicKey:
-		ctx->cert->pub->pkey_algo = "sm2";
+		if (parse_OID(ctx->params, ctx->params_size, &oid) != 0)
+			return -EBADMSG;
+
+		switch (oid) {
+		case OID_sm2:
+			ctx->cert->pub->pkey_algo = "sm2";
+			break;
+		default:
+			return -ENOPKG;
+		}
 		break;
 	default:
 		return -ENOPKG;
diff --git a/include/linux/oid_registry.h b/include/linux/oid_registry.h
index b504e2f36b25..f32d91895e4d 100644
--- a/include/linux/oid_registry.h
+++ b/include/linux/oid_registry.h
@@ -121,6 +121,7 @@  enum OID {
 };
 
 extern enum OID look_up_OID(const void *data, size_t datasize);
+extern int parse_OID(const void *data, size_t datasize, enum OID *oid);
 extern int sprint_oid(const void *, size_t, char *, size_t);
 extern int sprint_OID(enum OID, char *, size_t);
 
diff --git a/lib/oid_registry.c b/lib/oid_registry.c
index f7ad43f28579..508e0b34b5f0 100644
--- a/lib/oid_registry.c
+++ b/lib/oid_registry.c
@@ -11,6 +11,7 @@ 
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/bug.h>
+#include <linux/asn1.h>
 #include "oid_registry_data.c"
 
 MODULE_DESCRIPTION("OID Registry");
@@ -92,6 +93,18 @@  enum OID look_up_OID(const void *data, size_t datasize)
 }
 EXPORT_SYMBOL_GPL(look_up_OID);
 
+int parse_OID(const void *data, size_t datasize, enum OID *oid)
+{
+	const unsigned char *v = data;
+
+	if (datasize < 2 || v[0] != ASN1_OID || v[1] != datasize - 2)
+		return -EBADMSG;
+
+	*oid = look_up_OID(data + 2, datasize - 2);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(parse_OID);
+
 /*
  * sprint_OID - Print an Object Identifier into a buffer
  * @data: The encoded OID to print